ABSTRACT
Electromagnetic interference (EMI) shielding and infrared stealth technologies are essential for military and civilian applications. However, it remains a significant challenge to integrate various functions efficiently into a material efficiently. Herein, a minimalist strategy to fabricate multifunctional phase change organohydrogels (PCOHs) was proposed, which were fabricated from polyacrylamide (PAM) organohydrogels, MXene/PEDOT:PSS hybrid fillers, and sodium sulfate decahydrate (Na2SO4·10H2O, SSD) via one-step photoinitiation strategies. PCOHs with a high enthalpy value (130.7 J/g) and encapsulation rate (98%) could adjust the temperature by triggering a phase change of SSD, which can hide infrared radiation to achieve medium-low temperature infrared stealth. In addition, the PCOH-based sensor has good strain sensing ability due to the incorporation of MXene/PEDOT:PSS and can precisely monitor human movement. Remarkably, benefiting from the electron conduction of the three-dimensional conductive network and the ion conduction of the hydrogel, the EMI shielding efficiency (k) of PCOHs can reach 99.99% even the filler content as low as 1.8 wt %. Additionally, EMI shielding, infrared stealth, and sensing-integrated PCOHs can be adhered to arbitrary targets due to their excellent flexibility and adaptability. This work offers a promising pathway for fabricating multifunctional phase change materials, which show great application prospects in military and civilian fields.
ABSTRACT
Epicoccanes A-D (1-4) are four novel metabolites of an endophytic fungus Epicoccum nigrum. Their distinct unprecedented structures are hypothesized as oxidative dimers of pyrogallol analogues. Compounds 1 and 2 possess a novel spirobicyclo[3.2.1]octane-6,1'-cyclopentane or -cyclohexane core skeleton. Compound 3 is of a unique cage-like pentacyclic system, which unusually contained three continuous spiro-carbons. Compound 4 is a highly rearranged dimer with five contiguous chiral centers. The absolute structures of 1 and 2 were deduced by electronic circular dichroism (ECD) calculations, and those of 3 and 4 were determined by X-ray crystallography. Compounds 1 and 4 showed potential antiliver fibrosis activity.
Subject(s)
Ascomycota , Pyrogallol , Ascomycota/chemistry , Cyclohexanes , Cyclopentanes , Magnetic Resonance Spectroscopy , Molecular Structure , Octanes , Oxidative StressABSTRACT
Photothermoelectric (PTE) conversion can achieve the recovery of low-quality light or heat efficiently. Much effort has been devoted to the exploitation of the inorganic heterogeneous asynchronous (separate) PTE conversion system. Here, a full organic PTE film with a pseudobilayer architecture (PBA) according to the homogeneous synchronous (all-in-one) PTE conversion hypothesis was prepared via successive drop-casting a PEDOT:PSS/helical carbon nanotube (HCNT) mixture and PEDOT:PSS onto a vacuum ultraviolet treated substrate. Our results prove that the heptagon-pentagon pairs embedded in HCNTs promote a denser arrangement of the molecular chains of PEDOT, which enhances the crystallinity and affects the thermoelectric properties. The weak connection and hollow structure of HCNTs inhibit the dissipation of heat, and the zT value of the film reaches over 0.01. The PBA film shows better photothermal conversion performance than a neat PEDOT:PSS film and stably generates a temperature difference of over 25.68 °C without external cooling. A flexible PTE chip demo was manufactured, and the ideal open-circuit voltage (simulated via COMSOL) of that reaches over 1.5 mV under weak NIR stimulation (83.12 mW/cm2), which is the best value reported for an organic all-in-one PTE device, and the real maximum output power reaches 2.55 nW (166.01 mW/cm2). The chip has incredible ultraflexibility, and its inner resistance changes less than 1.42% after 10000 bending cycles and displays ultrahigh stability (similarity >90%) in a continuous periodic output. Our work fills the deficit of homogeneous synchronous PTE research for a PEDOT:PSS composite and is a preliminary attempt in an ultraflexible integrated all-in-one PTE chip design.
ABSTRACT
The massive accumulation of plastic waste has caused a serious negative impact on the human living environment. Replacing traditional petroleum-based polymers with biobased and biodegradable poly(l-lactic acid) (PLLA) is considered an effective way to solve this problem. However, it is still a great challenge to manufacture PLLA-based composites with high thermal conductivity and excellent mechanical properties via tailoring the microstructures of the blend composites. In the present work, a melt extrusion-stretching method is utilized to fabricate biodegradable PLLA/poly(butylene adipate-co-butylene terephthalate)/carbon nanofiber (PLLA/PBAT/CNF) blend composites. It is found that the incorporation of the extensional flow field induces the formation of multioriented microstructures in the composites, including the oriented PLLA molecular chains, elongated PBAT dispersed phase, and oriented CNFs, which synergistically improve the thermal conductivity and mechanical properties of the blend composites. At a CNF content of 10 wt %, the in-plane thermal conductivity, tensile strength, and elongation at break of the blend composite reach 1.53 Wm-1 K-1, 66.8 MPa, and 56.5%, respectively, which increased by 31.9, 73.5, and 874.1% compared with those of the conventionally hot-compressed sample (1.16 Wm-1 K-1, 38.5 MPa, and 5.8%, respectively). The main mechanism for the improved thermal conductivity is that the multioriented structure promotes the formation of a CNF thermal conductive network in the composites. The strengthening mechanism is attributed to the orientation of both PLLA molecular chains and CNFs in the stretching direction, restricting the movement of PLLA molecular segments around CNFs, and the toughening mechanism is due to the transformation of PLLA molecular chains from low-energy gt conformers to high-energy gg conformers induced by extensional flow field. More interestingly, after the extrusion-stretched samples are annealed, the oriented PLLA molecular chains form oriented crystal structures such as extended-chain lamellae, common "Shish-kebabs," and hybrid Shish-kebabs, which further enhance the thermal conductivity and heat resistance of the samples. This work reveals the effects of the orientation of the matrix molecular chains and crystallites on the thermal conductivity and mechanical properties of composites and provides a new way to prepare high-performance PLLA-based composites with high thermal conductivity, excellent mechanical properties, and high heat resistance.
Subject(s)
Nanofibers , Polyesters , Humans , Nanofibers/chemistry , Polyesters/chemistry , Polymers/chemistry , Thermal ConductivityABSTRACT
Multifunctional phase change materials (PCMs) are highly desirable for the thermal management of miniaturized and integrated electronic devices. However, the development of flexible PCMs possessing heat energy storage, shape memory, and adjustable electromagnetic interference (EMI) shielding properties under complex conditions remains a challenge. Herein, the multifunctional PCM composites were prepared by encapsulating poly(ethylene glycol) (PEG) into porous MXene/silver nanowire (AgNW) hybrid sponges by vacuum impregnation. Melamine foams (MFs) were chosen as a template to coat with MXene/AgNW (MA) to construct a continuous electrical/thermal conductive network. The MF@MA/PEG composites showed a high latent heat (141.3 J/g), high dimension retention ratio (96.8%), good electrical conductivity (75.3 S/m), and largely enhanced thermal conductivity (2.6 times of MF/PEG). Moreover, by triggering the phase change of the PEG, the sponges displayed a significant photoinduced shape memory function with a high shape fixation ratio (â¼100%) and recovery ratio (â¼100%). Interestingly, the EMI shielding effectiveness (SE) can be adjusted from 12.4 to 30.5 dB by a facile compression-recovery process based on shape memory properties. Furthermore, a finite element simulation was conducted to emphasize the advantage of the MF@MA/PEG composites in the thermal management of chips. Such flexible PCM composites with high latent heat storage, light-actuated shape memory, and adjustable EMI shielding functions exhibit great potential as smart thermal management materials in military and aerospace applications.
ABSTRACT
Helical carbon nanotube (HCNT) is a vital member of carbon nanomaterials, but little effort was devoted to explore its unique characteristics and applications during the past few decades. Here, we report an organic thermoelectric composite with an excellent photothermoelectric (PTE) effect by conformally wrapping polypyrrole (PPy) on the intricate surface of HCNTs, which have been confirmed to have remarkable near-infrared (NIR) photothermal conversion capability and ultralow heat transportation characteristics. The results indicate that with the increasing HCNT content, PPy shell thickness reduces and exhibits denser as well as partial orientation, while the inter-ring angle slowly decreases and the bipolaron becomes dominant in carrier composition gradually. Consequently, the Seebeck coefficient increases monotonically, whereas the electrical conductivity remains nearly invariant. The final composite combines the benign thermoelectric properties, excellent photothermal response performance, and the lowest thermal conductivity of the carbon-based thermoelectric composite yet reported (0.064 W m-1 K-1). A single strip NIR light-stimulated adjustable delay switch was designed and fabricated, with the open-circuit voltage and short-circuit current under a 400 mW cm-2 NIR-stimulated approach to 720 µV and 62 nA with the discrepancy of consecutive periodic output signals less than 4.2%, exhibiting incredible stability and reliability and demonstrating the highest output voltage of a single strip among the reported organic PTE composite at room temperature. Our work fills in a gap of HCNT research, which hitherto existed in the PTE and thermoelectric field.
ABSTRACT
The hybrid networks of cellulose nanocrystals (CNCs) and graphene nanoplatelets (GNPs) were constructed in polyethylene glycol (PEG) through the common solution compounding processing, in which GNPs provided the thermally conductive path while CNCs restricted the leakage of PEG during the phase transition. The results showed that CNCs greatly enhanced the shape stability of the composite phase change materials (PCMs) while thermal conductivity was still maintained at high level. At the contents of 8 wt% (CNCs) and 4 wt% (GNPs), the enthalpy of the composite PCM was 145.5 J/g, which was 88 % of pure PEG, and the thermal conductivity was 2.018±0.067 W/m K about 563.7 % higher than that of pure PEG. Furthermore, the composite PCMs exhibited outstanding light-thermal and electro-thermal conversion capabilities. Furthermore, the composite PCMs could be designed as the temperature stabilizing component exhibiting intelligent adaptive thermal management role, providing stable temperature condition for electronic devices in extreme environment.
ABSTRACT
Organic phase change materials (OPCMs) play a great role in energy management owing to their large phase change enthalpy, but their intrinsic low thermal conductivity (TC) and bad encapsulation severely restrict their applications. To overcome these problems, we developed a novel but feasible method to fabricate a graphene nanoplatelet (GNP) aerogel with compact and oriented stacking in-plane walls and many through-plane bridges via melamine foam (MF) and cellulose nanofiber (CNF) co-mediated assembly of GNPs. After impregnating paraffin wax (PW), the composite PCMs exhibit a high TC of 1.42 W m-1 K-1 at only a GNP content of 4.1 wt%, increasing by 407% compared with pure PW, and simultaneously nearly no reduction of the phase change enthalpy of PW. Meanwhile, this kind of composite PCM can not only show excellent light-to-thermal and electric-to-thermal transition ability, but also be applied in delay switch devices with satisfactory results.
ABSTRACT
Polymer dielectric composites have widespread applications in many fields ranging from energy storage, microelectronic devices, and sensors to power driven systems, etc. and attract much attention of researchers. However, it is still challenging to prepare advanced polymer dielectric composites with a high dielectric constant (ε'), low dielectric loss (tan δ) and simultaneously high breakdown strength (E bd). In this work, conductive polypyrrole (PPy) nanoparticles were in situ synthesized in a reaction system containing the common barium titanate (BaTiO3, BT) or hydroxylated BaTiO3 (BTOH) particles, and then the PPy@BT and PPy@BTOH composite particles were incorporated into poly(vinylidene fluoride) (PVDF) to prepare the composites. The morphologies and microstructures of the PPy@BT and PPy@BTOH composite particles and the corresponding PVDF composites were comparatively investigated. The results showed that the PPy@BTOH composite particles had a 'mulberry'-like morphology with a rough surface and the self-assembled structure could be maintained in the PVDF composites, which was apparently different from the PVDF/PPy@BT composites, in which most of the PPy nanoparticles dissociatively dispersed in the PVDF matrix. Electrical conductivity measurements showed that at high particle content (≥20 wt%), the PPy@BTOH composite particles endowed the composites with lower electrical conductivity compared with the PPy@BT composite particles. Dielectric property measurements showed that the 'mulberry'-like PPy@BTOH composite particles endowed the PVDF composites with extremely high ε', ultralow tan δ and high E bd compared with the PVDF/PPy@BT composites with dissociatively dispersed PPy nanoparticles and BaTiO3 particles. The polarization and loss mechanisms of the composites were then proposed based on the morphologies and the microstructures of the composites. This work provides an alternative way to fabricate functional dielectric particles through trace functional groups inducing in situ polymerization of conductive polymers, and these particles can be used to fabricate advanced dielectric composites.
ABSTRACT
Phase change materials (PCMs) exhibit wide application prospects in many fields related to energy utilization and management and attract increasing interest. In this work, through the graphene oxide (GO)-assisted dispersion technology, GO/boron nitride (BN) nanosheets were incorporated into melamine foam and successfully deposited on the surface of the foam framework after hydrothermal reaction. Through the following freeze-drying and carbonization treatment, the composite MF/rGO/BN aerogels were obtained with integrated hybrid rGO/BN frameworks. The composite PCMs were prepared through encapsulating polyethylene glycol (PEG) within the hybrid aerogels. The encapsulation stability and thermal properties of the composite PCMs were systematically investigated. The composite PCM sample containing the highest content of rGO/BN exhibited excellent encapsulation stability, high thermal conductivity (up to 0.79 W m-1 K-1), high phase change enthalpy (160.7 J g-1) with the retention of 90.8% of the pure PEG, and excellent chemical and thermal stability. Further results clearly showed that the composite PCMs had excellent light-to-heat energy transition ability and could be used as a thermal management component to suppress the overheating of devices during the operation process, or to supply energy for thermoelectric devices under emergency conditions to ensure a continuous power supply sustained for a certain time until the safeguard procedures are adopted.
ABSTRACT
Paraffin wax (PW) is widely used as a phase change material (PCM) in the thermal energy storage field, whereas the leakage and strong rigidity of PW have hindered its practical applications. In this work, binary melamine foam (MF)/PW blends with simultaneous thermal energy storage and shape memory properties were prepared through vacuum impregnation. Herein, PW performs as a latent heat storage material and as a switching phase for shape fixation and MF serves as a supporting material to prevent the leakage and as a permanent phase for shape recovery. Due to the light weight and super-elasticity of MF, the MF/PW PCMs possess not only good encapsulation ability and a high latent heat, but also excellent shape-fixing and recovery properties (shape-fixing and recovery ratios are about 100%). Besides, the MF/PW PCMs can be fabricated into arbitrary shapes using MF as a template, and they exhibit excellent shape memory cyclic performance and thermal reliability. A temperature-sensitive and temperature-controlled deployable panel is further established, which can be installed in the electronic device and used for temperature protection. With high thermal energy storage capability, excellent shape memory properties, shape designability, and stable cycling reliability, this multifunctional MF/PW PCM shows a promising application in thermal energy management systems.
ABSTRACT
Developing highly efficient and multifunctional membranes toward oil adsorption and oil/water separation is of significance in oily wastewater treatment. Herein, a novel electrospun composite membrane with dual-scaled porous structure and nanoraised structure on each fiber was fabricated through electrospinning using biodegradable polylactide (PLA) and magnetic γ-Fe2O3 nanoparticles. The PLA/γ-Fe2O3 composite membranes show high porosity (>90%), superhydrophobic and superlipophilic performances with CH2I2 contact angle of 0°, good water adhesion ability like water droplets on a petal surface, excellent anti-icing performance, and good mechanical properties with a tensile strength of 1.31 MPa and a tensile modulus of 11.65 MPa. The superlipophilicity and dual-scaled porous structure endow the composite membranes with ultrahigh oil adsorption capacity up to 268.6 g/g toward motor oil. Furthermore, the composite membranes also show high oil permeation flux up to 2925 L/m2 h under the force of gravity. Even for oil/water emulsion, the composite membranes have high separation efficiency. We expect that the PLA/γ-Fe2O3 composite membranes can be used in oily wastewater treatment under various conditions through one-off adsorption or continuous oil/water separation, especially under low environmental temperature condition.
ABSTRACT
In this work, novel functionalized poly(l-lactide) (F-PLLA) porous fibers were fabricated through electrospinning using the PLLA/methylene chloride (CH2Cl2)/N,N-dimethylformamide (DMF) solution containing diethylenetriamine (DETA) and γ-aminopropyltriethoxysilane (KH-550). The effects of PLLA, DETA and KH-550 contents on the morphologies of the electrospun fibers were systematically investigated, and the results showed that at PLLA, DETA and KH-550 contents of 20% w/v, 2 wt% and 3 wt%, respectively, the electrospun F-PLLA fibers exhibited the homogeneous distribution of fiber diameters and the homogeneous porous structure on the fiber surface. Nitrogen-containing groups were successfully introduced to the electrospun fibers, which induced the great improvement of the hydrophilicity of the membrane surface. Adsorption measurements showed that the electrospun F-PLLA membrane had good adsorption ability toward Congo red (CR), and the adsorption capacity at room temperature was enhanced in 16 times compared with the common PLLA fiber membrane, and the maximum adsorption capacity was 135.7 mg g-1. Furthermore, the adsorption behavior could be well described by the pseudo second-order model. Oil/water separating measurements showed that the electrospun F-PLLA membrane exhibited high separation efficiency and the maximum water fluxes were 2018 and 1861 L m-2 h-1 in separating non-emulsified and emulsified oil/water system under atmospheric pressure, respectively.
ABSTRACT
As one of the materials from natural resources, the functionalization and application of cellulose attract increasing concerns. In this work, we reported a facile method to prepare the bio-inspired functionalization of microcrystalline cellulose (MCC) aerogel through polydopamine (PDA) coating, which was realized via the self-polymerization of dopamine in the MCC/LiBr solution followed by the freeze-drying technology. The morphological characterization showed that the pore morphologies of the compounded aerogel were influenced by the content of PDA. Adsorption measurements toward methylene blue (MB) showed that the compounded aerogel had high adsorption ability. Moreover, the compounded MCC/PDA aerogel exhibited excellent adsorption selectivity and it exhibited high efficiency to remove MB from different solutions, such as the mixed solution with anionic dyestuffs, the mixed solution with cationic dyestuffs and the mixed solution with common salt (NaCl). The high adsorption ability and excellent adsorption selectivity endows the compounded MCC/PDA aerogel with great potential applications in wastewater treatment.
ABSTRACT
This study aims to explore the prevalence and influence factors of depressive symptoms in Chinese older adults from 1987 to 2012. The study investigated 81 published papers on depressive symptoms in Chinese older adults using the 30-item Geriatric Depression Scale (GDS-30) or the Center for Epidemiologic Studies Depression Scale (CES-D) as a measuring tool through meta-analysis. A total of 88,417 Chinese older adults were included in this review. The pooled prevalence of depressive symptoms in Chinese older adults was 23.6% (95% CI: 20.3-27.2%). The pooled prevalence of depressive symptoms was greater in women. In addition, the prevalence of depressive symptoms in married older adults was lower than in single adults (i.e., divorced, unmarried or widowed). Depressive morbidity with GDS-30 was significantly higher than with CES-D. The prevalence of depressive symptoms in Chinese older adults presented a downward tendency with increasing educational level. Moreover, the prevalence of depressive symptoms gradually increased with the year of data collection. Significant differences were found in the measurement tools, gender, degree of education and marital status, but none in age.
Subject(s)
Depressive Disorder/epidemiology , Geriatric Assessment , Aged , China/epidemiology , Humans , Prevalence , Risk FactorsABSTRACT
OBJECTIVE: To investigate the clinicopathologic features and immunohistochemical of the basal-like subtype of invasive breast carcinoma (BLBC), and to discuss the diagnosis standard. METHODS: Immunohistochemistry was performed in 448 cases of breast carcinoma and these cases were categorized into luminal A, luminal B, null subtypes, HER2-overexpressing and basal-like and their clinicopathologic features were observed under light microscope with stains of HE and immunohistochemical InVitrogen staining. RESULTS: Among the breast cancer patients, the incidence of BLBC was 15.4% (69/448). Morphologic features significantly associated with BLBC constituently included nest structure and showing diffuse growth pattern, large scarring areas without cells in tumor, geographic necrosis, pushing margin of invasion, lymphocytic infiltrate in various degree in tumor stroma, syncytial tumor cell without clear boundaries, tumor cell showing vesicular unclear chromatin and nucleolus, markedly elevated mitotic count, metaplasia (all P < 0.01). Meanwhile, most BLBC showed strong immunoreactivity for CK5/6, CK14, CK17 (all P < 0.01). CONCLUSION: BLBC showed distinct morphologic and immunophenotypic features.
Subject(s)
Breast Neoplasms, Male , Breast Neoplasms , Carcinoma, Basal Cell , Carcinoma, Ductal, Breast , Adult , Aged , Aged, 80 and over , Breast Neoplasms/metabolism , Breast Neoplasms/pathology , Breast Neoplasms, Male/metabolism , Breast Neoplasms, Male/pathology , Carcinoma, Basal Cell/metabolism , Carcinoma, Basal Cell/pathology , Carcinoma, Ductal, Breast/metabolism , Carcinoma, Ductal, Breast/pathology , Female , Humans , Immunohistochemistry , Keratin-14/metabolism , Keratin-17/metabolism , Keratin-5/metabolism , Keratin-6/metabolism , Lymphatic Metastasis , Male , Middle Aged , Receptor, ErbB-2/metabolism , Receptors, Estrogen/metabolism , Receptors, Progesterone/metabolismABSTRACT
OBJECTIVE: To explore the effects of adenovirus-mediated wild-type p53 gene (Ad-p53) on the reversal of multidrug resistance (MDR) and multidrug resistance gene-1 (MDR1) in adriamycin (ADM) resistant human breast cancer cell. METHODS: Ad-p53 was transfected into the human breast cancer cells of the line MCF-7/ADM. p53 protein expression was detected by flow cytometry (FCM). The cell proliferation was assessed by trypan blue dye exclusion. The effects of Ad-p53 on ADM mediated drug resistance were observed by MTT assay. The expression levels of MDR1 mRNA were detected with real-time RT-PCR. RESULTS: The expression rate of p53 protein of the MCF-7/ADM cell was increased from 10.24% to 36.20% after transfected by MOI(50) Ad-p53 for 48 hours. The growth inhibition rate was 7.4 % (P = 0.003). The chemosensitivity of MCF-7/ADM to ADM increased by 11.6 times (P = 0.001). The result of real-time RT-PCR reveales that MDR1 mRNA was decreased from 1.25 +/- 0.01 to 0.91 +/- 0.01 (P = 0.011) after the MCF-7/ADM cells were transfected by Ad-p53. CONCLUSION: Ad-p53 can inhibit the expression of MDR1 gene and partially reverse the MDR of MCF-7/ADM cells, thus enhancing the chemosensitivity of human breast cancer cells to ADM.