Closed-Loop Direct Upcycling of Spent Ni-Rich Layered Cathodes into High-Voltage Cathode Materials.

Facing the resource and environmental pressures brought by the retiring wave of lithium-ion batteries (LIBs), direct recycling methods are considered to be the next generation's solution. However, the contradiction between limited battery life and the demand for rapidly iterating technology forces the direct recovery paradigm to shift toward "direct upcycling." Herein, a closed-loop direct upcycling strategy that converts waste current collector debris into dopants is proposed, and a highly inclusive eutectic molten salt system is utilized to repair structural defects in degraded polycrystalline LiNi0.83Co0.12Mn0.05O2 cathodes while achieving single-crystallization transformation and introducing Al/Cu dual-doping. Upcycled materials can effectively overcome the two key challenges at high voltages: strain accumulation and lattice oxygen evolution. It exhibits comprehensive electrochemical performance far superior to commercial materials at 4.6 V, especially its fast charging capability at 15 C, and an impressive 91.1% capacity retention after 200 cycles in a 1.2 Ah pouch cell. Importantly, this approach demonstrates broad applicability to various spent layered cathodes, particularly showcasing its value in the recycling of mixed spent cathodes. This work effectively bridges the gap between waste management and material performance enhancement, offering a sustainable path for the recycling of spent LIBs and the production of next-generation high-voltage cathodes.

Alleviating Structure Collapse of Polycrystalline LiNixCoyMn1-x-yO2 via Surface Co Enrichment.

The structure collapse issues have long restricted the application of polycrystalline LiNixCoyMn1-x-yO2 (NCM) at high voltages beyond 4.4 V vs Li/Li+. Herein, for LiNi0.55Co0.12Mn0.33O2 (P-NCM), rapid surface degradation is observed upon the first charge, along with serious particle fragmentation upon repeated cycles. To alleviate these issues, a surface Co enrichment strategy is proposed [i.e., Co-enriched NCM (C-NCM)], which promotes the in situ formation of a robust surface rock-salt (RS) layer upon charge, serving as a highly stable interface for effective Li+ migration. Benefiting from this stabilized surface RS layer, Li+ extraction occurs mainly through this surface RS layer, rather than along the grain boundaries (GBs), thus reducing the risk of GBs' cracking and even particle fragmentation upon cycles. Besides, O loss and TM (TM = Ni, Co, and Mn) dissolution are also effectively reduced with fewer side reactions. The C-NCM/graphite cell presents a highly reversible capacity of 205.1 mA h g-1 at 0.2 C and a high capacity retention of 86% after 500 cycles at 1 C (1 C = 200 mA g-1), which is among the best reported cell performances. This work provides a different path for alleviating particle fragmentation of NCM cathodes.

Somatic mutations in a multigene panel and impact on prognosis based on TP53 status in Chinese HER2-positive patients undergoing neoadjuvant therapy: A single-institution retrospective cohort.

BACKGROUND: Gene mutations play a crucial role in the occurrence and development of tumors, particularly in breast cancer (BC). Neoadjuvant therapy (NAT) has shown greater clinical benefit in HER2-positive breast cancer. However, further clinical investigation is needed to fully understand the correlation between genetic mutations and NAT efficacy and the long-term prognosis in HER2-positive BC. METHODS: This was a retrospective cohort study of 222 patients receiving NAT between 2017 and 2021 in the Department of Breast Surgery of Fudan University Shanghai Cancer Center. Tumor samples from these patients were subjected to Next Generation Sequencing (NGS) to analyze mutations in 513 cancer-related genes. This study aimed to investigate the association between these genetic mutations and postoperative pathological complete response (pCR), as well as their impact on disease-free survival (DFS). RESULTS: In total, 48.65% patients reached pCR, ER-negative status (p < 0.001), PR-negative status (p < 0.001), Ki67 ≥ 20 (p = 0.011), and dual-targeted therapy (p < 0.001) were all associated with enhanced pCR rates. The frequency of somatic alterations in TP53 (60%), PIK3CA (15%), and ERBB2 (11%) was highest. In the HER2+/HR- cohort, patients who achieved pCR had a significant benefit in prognosis (HR = 3.049, p = 0.0498). KMT2C (p = 0.036) and TP53 (p = 0.037) mutations were significantly increased in patients with DFS events. Moreover, TP53 mutations had prognostic significance in HER2-positive BC patients with HR-negative (HR = 3.712, p = 0.027) and pCR (HR = 6.253, p = 0.027) status and who received herceptin-only targeted therapy (HR = 4.145, p = 0.011). CONCLUSIONS: The genetic mutation profiles of Chinese HER2+ patients who received NAT were discrepant with respect to HR status or DFS events. TP53 mutations have significant prognostic value in patients with NAT for HER2-positive BC and patients benefit differently depending on HR status, the neoadjuvant regimen and response, which highlights the significance of genetic factors in treatment customization based on individual genetic and clinical characteristics.

Revealing the Grain-Boundary-Cracking Induced Capacity Decay of a High-Voltage LiCoO2 at 4.6 V.

During a practical battery manufacture process, the LiCoO2 (LCO) electrodes are usually rolled with high pressure to achieve better performance, including reducing electrode polarization, increasing compact density, enhancing mechanical toughness, etc. In this work, a high-voltage LCO (HV-LCO) is achieved via modulating a commercialized LCO with an Al/F enriched and spinel reinforced surface structure. We reveal that the rolling can more or less introduce risk of grain-boundary-cracking (GBC) inside the HV-LCO and accelerate the capacity decay when cycled at 3-4.6 V vs Li/Li+. In particular, the concept of interface structure is proposed to explain the reason for the deteriorated cycle stability. As the GBC is generated, the interface structure of HV-LCO alters from a surface spinel phase to a hybrid of surface spinel plus boundary layer phases, leading to the exposure of some the nonprotective layer phase against the electrolyte. This alternation causes serious bulk structure damage upon cycles, including expanding GBC among the primary crystals, forming intragranular cracks and inactive spinel phases inside the bulk regions, etc., eventually leading to the deteriorated cycle stability. Above all, we realize that it is far from enough to achieve a eligible high-voltage LCO via only applying surface modification. This work provides a new insight for developing more advanced LCO cathodes.

Promoting Surface Electric Conductivity for High-Rate LiCoO2.

The cathode materials work as the host framework for both Li+ diffusion and electron transport in Li-ion batteries. The Li+ diffusion property is always the research focus, while the electron transport property is less studied. Herein, we propose a unique strategy to elevate the rate performance through promoting the surface electric conductivity. Specifically, a disordered rock-salt phase was coherently constructed at the surface of LiCoO2 , promoting the surface electric conductivity by over one magnitude. It increased the effective voltage (Veff ) imposed in the bulk, thus driving more Li+ extraction/insertion and making LiCoO2 exhibit superior rate capability (154 mAh g-1 at 10 C), and excellent cycling performance (93 % after 1000 cycles at 10 C). The universality of this strategy was confirmed by another surface design and a simulation. Our findings provide a new angle for developing high-rate cathode materials by tuning the surface electron transport property.

Structure evolution and energy storage mechanism of Zn3V3O8 spinel in aqueous zinc batteries.

Spinel-type materials are promising for the cathodes in rechargeable aqueous zinc batteries. Herein, Zn3V3O8 is synthesized via a simple solid-state reaction method. By tuning the Zn(CF3SO3)2 concentration in electrolytes and the cell voltage ranges, improved electrochemical performance of Zn3V3O8 can be achieved. The optimized test conditions give rise to progressive structure evolution from bulk to nano-crystalline spinel, which leads to capacity activation in the first few cycles and stable cycling performance afterward. Furthermore, the energy storage mechanism in this nano-crystalline spinel is interpreted as the co-intercalation of zinc ions and protons with some water. This work provides a new viewpoint of the structure evolution and correlated energy storage mechanism in spinel-type host materials, which would benefit the design and development of next-generation batteries.

Oxygen-Deficient ß-MnO2@Graphene Oxide Cathode for High-Rate and Long-Life Aqueous Zinc Ion Batteries.

Recent years have witnessed a booming interest in grid-scale electrochemical energy storage, where much attention has been paid to the aqueous zinc ion batteries (AZIBs). Among various cathode materials for AZIBs, manganese oxides have risen to prominence due to their high energy density and low cost. However, sluggish reaction kinetics and poor cycling stability dictate against their practical application. Herein, we demonstrate the combined use of defect engineering and interfacial optimization that can simultaneously promote rate capability and cycling stability of MnO2 cathodes. ß-MnO2 with abundant oxygen vacancies (VO) and graphene oxide (GO) wrapping is synthesized, in which VO in the bulk accelerate the charge/discharge kinetics while GO on the surfaces inhibits the Mn dissolution. This electrode shows a sustained reversible capacity of ~ 129.6 mAh g-1 even after 2000 cycles at a current rate of 4C, outperforming the state-of-the-art MnO2-based cathodes. The superior performance can be rationalized by the direct interaction between surface VO and the GO coating layer, as well as the regulation of structural evolution of ß-MnO2 during cycling. The combinatorial design scheme in this work offers a practical pathway for obtaining high-rate and long-life cathodes for AZIBs.