ABSTRACT
We have successfully applied coupled thermogravimetry, mass spectrometry, and infrared spectroscopy to the quantification of surface functional groups on single-walled carbon nanotubes. A high-purity single-walled carbon nanotube sample was subjected to a rapid functionalization reaction that attached butyric acid moieties to the nanotube sidewalls. This sample was then subjected to thermal analysis under inert desorption conditions. Resultant infrared and mass spectrometric data were easily utilized to identify the desorption of the butyric acid groups across a narrow temperature range and we were able to calculate the degree of substitution of the attached acid groups within the nanotube backbone as 1.7 carbon atoms per hundred, in very good agreement with independent analytical measurements made by inductively coupled plasma optical emission spectrometry (ICP-OES). The thermal analysis technique was also able to discern the presence of secondary functional moieties on the nanotube samples that were not accessible by ICP-OES. This work demonstrates the potential of this technique for assessing the presence of multiple and diverse functional addends on the nanotube sidewalls, beyond just the principal groups targeted by the specific functionalization reaction.
ABSTRACT
We report a rapid and efficient procedure to functionalize SWNT where free radicals generated at room temperature by a redox reaction between reduced SWNT and diacyl peroxide derivatives were covalently attached to the SWNT wall.
ABSTRACT
A suite of three ginkgo-containing dietary supplement Standard Reference Materials (SRMs) has been issued by the National Institute of Standards and Technology (NIST) with certified values for flavonoid aglycones, ginkgolides, bilobalide, and selected toxic trace elements. The materials represent a range of matrices (i.e., plant, extract, and finished product) that provide different analytical challenges. The constituents have been determined by at least two independent analytical methods with measurements performed by NIST and at least one collaborating laboratory. The methods utilized different extractions, chromatographic separations, modes of detection, and approaches to quantitation. The SRMs are primarily intended for method validation and for use as control materials to support the analysis of dietary supplements and related botanical materials.
Subject(s)
Dietary Supplements/analysis , Dietary Supplements/standards , Ginkgo biloba/chemistry , Arsenic/analysis , Arsenic/toxicity , Chromatography, Liquid , Flavonoids/chemistry , Ginkgolides/chemistry , Lactones/chemistry , Metals, Heavy/analysis , Metals, Heavy/toxicity , Molecular Structure , Reference Standards , Spectrometry, Mass, Electrospray Ionization , Terpenes/chemistryABSTRACT
In radiological dispersal device (RDD) studies, sintered ceramics made of CeO2 and SrTiO3 were used to simulate actinide oxides and (90)SrTiO3, respectively. Instrumental neutron activation analysis (INAA), inductively coupled plasma optical emission spectroscopy (ICP-OES), and inductively coupled plasma mass spectrometry (ICP-MS) were investigated as possible analytical techniques for the measurement of SrTiO3 and CeO2 constituents in powder forms, sintered ceramics, and air particulates collected following a detonation. For ICP-OES and ICP-MS analysis, new digestion procedures were developed using a closed-vessel microwave apparatus. Acid mixtures (HNO3:H2O2:HF (16:2:1) and HNO3:H2O2 (1:4)) were found to be effective for the digestion of SrTiO3 and CeO2, respectively. The intercomparison study confirmed that the results obtained by ICP-OES/MS are in good agreement with INAA results. This also confirms the efficiency of the digestion procedures for these refractory materials and the inter-exchangeability of the instrumentation tested. Comparison between the ICP-OES and the ICP-MS instrumentation for the determination of air particulates shows, that although the two methods are equivalent, ICP-MS provides better detection limits (0.11, 0.02, and 0.04 microg per filter for Ti, Sr, and Ce, respectively) and the possibility to determine isotopic fractionation as the result of an explosion.
Subject(s)
Ceramics/chemistry , Cerium/analysis , Mass Spectrometry/methods , Strontium/analysis , Titanium/analysisABSTRACT
A new selenized yeast reference material (SELM-1) produced by the Institute for National Measurement Standards, National Research Council of Canada (INMS, NRC) certified for total selenium (2,059+/-64 mg kg(-1)), methionine (Met, 5,758+/-277 mg kg(-1)) and selenomethionine (SeMet, 3,431+/-157 mg kg(-1)) content is described. The +/-value represents an expanded uncertainty with a coverage factor of 2. SeMet and Met amount contents were established following a methanesulfonic acid digestion of the yeast using GC-MS and LC-MS quantitation. Isotope dilution (ID) calibration was used for both compounds, using 13C-labelled SeMet and Met. Total Se was determined after complete microwave acid digestion based on ID ICP-MS using a 82Se spike or ICP-OES spectrometry using external calibration. An international intercomparison exercise was piloted by NRC to assess the state-of-the-art of measurement of selenomethione in SELM-1. Determination of total Se and methionine was also attempted. Seven laboratories submitted results (2 National Metrology Institutes (NMIs) and 5 university/government laboratories). For SeMet, ten independent mean values were generated. Various acid digestion and enzymatic procedures followed by LC ICP-MS, LC AFS or GC-MS quantitation were used. Four values were based on species-specific ID calibration, one on non-species-specific ID with the remainder using standard addition (SA) or external calibration (EC). For total selenium, laboratories employed various acid digestion procedures followed by ICP-MS, AFS or GC-MS quantitation. Four laboratories employed ID calibration, the remaining used SA or EC. A total of seven independent results were submitted. Results for methionine were reported by only three laboratories, all of which used various acid digestion protocols combined with determination by GC-MS and LC UV. The majority of participants submitted values within the certified range for SeMet and total Se, whereas the intercomparison was judged unsuccessful for Met because only two external laboratories provided values, both of which were outside the certified range.
Subject(s)
Chromatography, Liquid/methods , Mass Spectrometry/methods , Methionine/analysis , Saccharomyces cerevisiae/chemistry , Selenium/analysis , Selenomethionine/analysis , Methionine/chemistry , Reference Standards , Selenium/chemistry , Selenomethionine/chemistryABSTRACT
Total mercury in biological samples was determined by flow injection (FI) cold vapour atomic absorption spectrometry (CVAAS) following tissue solubilization with formic acid. A mixture of potassium bromide and potassium bromate was used to decompose organomercury compounds prior to their reduction with sodium borohydride. A gold amalgam system was used to achieve lower detection limits when required. National Research Council Canada certified reference materials dogfish liver (DOLT-3), dogfish flesh (DORM-2) and lobster hepatopancreas (TORT-2), as well as oyster tissue (NIST SRM 1566b) and mussel tissue (NIST SRM 2976) were used to assess the accuracy of the method. The method of standard additions provided the most accurate results. Limit of detection (LOD) for Hg in the solid sample of 0.001 and 0.01mugg(-1) were achieved with and without amalgamation, respectively. The precision of measurement for 1.6ngml(-1) methylmercury was 2.7% using the amalgam system.
ABSTRACT
The National Institute of Standards and Technology, the U.S. Food and Drug Administration, Center for Drug Evaluation and Research and Center for Food Safety and Applied Nutrition, and the National Institutes of Health, Office of Dietary Supplements, are collaborating to produce a series of Standard Reference Materials (SRMs) for dietary supplements. A suite of ephedra materials is the first in the series, and this paper describes the acquisition, preparation, and value assignment of these materials: SRMs 3240 Ephedra sinica Stapf Aerial Parts, 3241 E. sinica Stapf Native Extract, 3242 E. sinica Stapf Commercial Extract, 3243 Ephedra-Containing Solid Oral Dosage Form, and 3244 Ephedra-Containing Protein Powder. Values are assigned for ephedrine alkaloids and toxic elements in all 5 materials. Values are assigned for other analytes (e.g., caffeine, nutrient elements, proximates, etc.) in some of the materials, as appropriate. Materials in this suite of SRMs are intended for use as primary control materials when values are assigned to in-house (secondary) control materials and for validation of analytical methods for the measurement of alkaloids, toxic elements, and, in the case of SRM 3244, nutrients in similar materials.
Subject(s)
Ephedra/chemistry , Alkaloids/analysis , Cadmium/analysis , Calcium/analysis , Carbohydrates/analysis , Dietary Supplements/analysis , Ephedra/radiation effects , Fatty Acids/analysis , Humidity , Reference Standards , Reproducibility of Results , Trace Elements/analysis , Vitamins/analysisABSTRACT
A simple, fast method is described for the determination of Ag, As, Cd, Cu, Cr, Fe, Ni, and Se in marine biological tissues by electrothermal atomic-absorption spectrometry (ETAAS) and Na, Ca, K, Mg, Fe, Cu, and Mn by inductively coupled plasma-atomic emission spectrometry (ICP-AES). Solubilization of the biological tissue was achieved by using formic acid with vortex mixing followed by heating to 50 degrees C in an ultrasonic bath. Once solubilized, the tissues were diluted to an appropriate volume with water for analysis. Aliquots were sampled into a graphite furnace and ICP-AES using a conventional autosampler. The method was validated by use of biological certified reference materials from NRC, DORM-2, DOLT-2, DOLT-3, LUTS-1, TORT-2, and NIST SRMs 1566b and 2976. Simplicity and reduced sample-preparation time prove to be the major advantages to the technique.