ABSTRACT
PURPOSE: Corneal collagen cross-linking (CXL) can halt corneal ectasia. Leaving corneal epithelium intact during treatment may reduce the incidence of complications. However, it is under debate whether this reduces efficacy and if oxygen supplementation may be necessary to optimize the cross-linking effect. This study aimed to investigate the impact of hyperbaric oxygenation (HBO) on intracorneal oxygen concentrations during epi-off and epi-on CXL. METHODS: CXL was performed using riboflavin and ultraviolet-A (UV-A) irradiance (3 mW/cm2 for 30 min) on porcine corneas under normobaric and hyperbaric conditions, with and without supplemented oxygen, with and without epithelium. Intracorneal oxygen concentrations were continuously monitored before and during irradiation. Biomechanical properties were assessed through tensile strength testing. RESULTS: HBO alone did not cause perceivable changes in stromal oxygen concentrations. Oxygen supplementation resulted in higher oxygen concentration in corneal stroma during CXL. HBO may cause a further increase in oxygen levels, although this was not statistically significant in this study. Notably, a tendency of oxygen levels to rise continuously during UV-irradiation was observed using HBO. Biomechanical properties showend no statistically significant differences between any groups. CONCLUSIONS: In this ex-vivo model, HBO increased stromal oxygen levels during CXL, regardless of the presence of corneal epithelium. The dynamics in oxygen concentrations in corneal stromal tissue during CXL suggest that time is an important factor to consider in modifications of established protocols. Also, we hypothesize that stromal levels of riboflavin and UV-A irradiance may be more critical to the CXL effect when oxygen is supplemented and epithelium is not removed.
ABSTRACT
PURPOSE: Corneal biomechanics is an emerging field and the interest into physical and biological interrelations in the anterior part of the eye has significantly increased during the past years. There are many factors that determine corneal biomechanics such as hormonal fluctuations, hydration and environmental factors. Other factors that can affect the corneas are the age, the intraocular pressure and the central corneal thickness. The purpose of this review is to evaluate the factors affecting corneal biomechanics and the recent advancements in non-destructive, in vivo measurement techniques for early detection and improved management of corneal diseases. METHODS: Until recently, corneal biomechanics could not be directly assessed in humans and were instead inferred from geometrical cornea analysis and ex vivo biomechanical testing. The current research has made strides in studying and creating non-destructive and contactless techniques to measure the biomechanical properties of the cornea in vivo. RESULTS: Research has indicated that altered corneal biomechanics contribute to diseases such as keratoconus and glaucoma. The identification of pathological corneas through the new measurement techniques is imperative for preventing postoperative complications. CONCLUSIONS: Identification of pathological corneas is crucial for the prevention of postoperative complications. Therefore, a better understanding of corneal biomechanics will lead to earlier diagnosis of ectatic disorders, improve current refractive surgeries and allow for a better postoperative treatment.
Subject(s)
Cornea , Keratoconus , Humans , Biomechanical Phenomena , Keratoconus/diagnosis , Keratoconus/surgery , Intraocular Pressure , Postoperative ComplicationsABSTRACT
BACKGROUND: Achieving precise refractive outcomes in phakic posterior chamber intraocular lens (pIOL) implantation is crucial for patient satisfaction. This study investigates factors affecting pIOL power calculations, focusing on myopic eyes, and evaluates the potential benefits of advanced predictive models. DESIGN: Retrospective, single-center, algorithm improvement study. METHODS: Various variations with different effective lens position (ELP) algorithms were analyzed. The algorithms included a fixed constant model, and a multiple linear regression model and were tested with and without incorporation of the posterior corneal curvature (Rcp). Furthermore, the impact of inserting the postoperative vault, the space between the pIOL and the crystalline lens, into the ELP algorithm was examined, and a simple vault prediction model was assessed. RESULTS: Integrating Rcp and the measured vault into pIOL calculations did not significantly improve accuracy. Transitioning from constant model approaches to ELP concepts based on linear regression models significantly improved pIOL power calculations. Linear regression models outperformed constant models, enhancing refractive outcomes for both ICL and IPCL pIOL platforms. CONCLUSIONS: This study underscores the utility of implementing ELP concepts based on linear regression models into pIOL power calculation. Linear regression based ELP models offered substantial advantages for achieving desired refractive outcomes, especially in lower to medium power pIOL models. For pIOL power calculations in both pIOL platforms we tested with preoperative measurements from a Scheimpflug device, we found improved results with the LION 1ICL formula and LION 1IPCL formula. Further research is needed to explore the applicability of these findings to a broader range of pIOL designs and measurement devices.
Subject(s)
Lens, Crystalline , Phakic Intraocular Lenses , Humans , Retrospective Studies , Lens Implantation, Intraocular/methods , CorneaABSTRACT
PURPOSE: To assess the feasibility and reliability of biometric measurements taken with the Eyestar 900 device in keratoconus eyes in comparison with those taken with the Pentacam HR and IOLMaster 700. METHODS: Seventy-five eyes of 75 patients with keratoconus were included. The central corneal thickness (CCT), thinnest point of corneal thickness (TCT), axial length (AL), flat (K1) and steep (K2) anterior and posterior (Kp1, Kp2) keratometry, maximal keratometry (KMax) and anterior chamber depth (ACD) were compared between the Eyestar 900, Pentacam HR and IOLMaster 700. Reliability parameters such as the coefficient of variation (CoV) and intraclass correlation coefficient (ICC) were calculated. Pearson's r was determined to assess the correlation between devices. RESULTS: A high repeatability (CoV < 1%) and intraclass correlation (ICC > 0.9) was found for all devices, led by AL, TCT, K1 and K2 (CoV 0.01-0.36%; ICC 0.994-1.00). The largest correlation between devices was found for AL (Eyestar vs. IOLMaster, r = 1.0), K1 (Eyestar vs. IOLMaster, r = 0.997) and ACD (Eyestar vs. IOLMaster, r = 0.995; Pentacam vs. IOLMaster, r = 0.987; Eyestar vs. Pentacam, r = 0.983), but there were significant differences in measured values between devices (p < 0.001), whereas the correlation was only slightly lower (r = 0.947 to 0.994) for KMax, CCT, TCT, K2, Kp1 and Kp2. CONCLUSION: Keratometric and axial length measurements with the Eyestar 900 were feasible and revealed a high repeatability and a good correlation to the other devices in eyes with keratoconus.
Subject(s)
Keratoconus , Humans , Keratoconus/diagnosis , Tomography, Optical Coherence , Reproducibility of Results , Eye , BiometryABSTRACT
BACKGROUND: To evaluate the intraindividual visual performance of a spherical and extended depth of field (EDOF) IOL used in a mix-and-match approach. METHODS: Single centre (tertiary care centre), retrospective consecutive case series. Included patients had uneventful cataract surgery with implantation of a spherical monofocal IOL (CT Spheris 204) in the dominant eye and a diffractive EDOF IOL (AT LARA 829) in the non-dominant eye. Monocular and binocular defocus curves and visual acuity at various distances were assessed. In addition, binocular reading speed, contrast sensitivity, and patient satisfaction using QOV, Catquest 9SF, and glare/halo questionnaires are reported. RESULTS: A total of 29 patients (58 eyes) were included. We observed significant intra-individual differences for monocular DCIVA, DCNVA, UIVA, and UNVA. There were no differences in monocular BCDVA or UDVA. The monocular defocus curves for the two IOLs significantly differed at defocus steps between -1.0 and -3.5 D. 93.10% of patients reported they would opt for the same combination of IOLs. CONCLUSION: Excellent uncorrected and corrected distance visual acuity was demonstrated in both groups. The mix-and-match approach described in this study yielded good intermediate vision and improved near vision with high-patient satisfaction.
Subject(s)
Lenses, Intraocular , Phacoemulsification , Humans , Refraction, Ocular , Lens Implantation, Intraocular , Pseudophakia , Retrospective Studies , Vision, Binocular , Patient Satisfaction , Prosthesis DesignABSTRACT
PURPOSE: This study aimed to explore the concept of total keratometry (TK) by analyzing extensive international datasets representing diverse ethnic backgrounds. The primary objective was to quantify the disparities between traditional keratometry (K) and TK values in normal eyes and assess their impact on intraocular lens (IOL) power calculations using various formulas. DESIGN: Retrospective multicenter intra-instrument reliability analysis. METHODS: The study involved the analysis of biometry data collected from ten international centers across Europe, the United States, and Asia. Corneal power was expressed as equivalent power and astigmatic vector components for both K and TK values. The study assessed the influence of these differences on IOL power calculations using different formulas. The results were analyzed and plotted using Bland-Altman and double angle plots. RESULTS: The study encompassed a total of 116,982 measurements from 57,862 right eyes and 59,120 left eyes. The analysis revealed a high level of agreement between K and TK values, with 93.98% of eyes exhibiting an absolute difference of 0.25 D or less. Astigmatism vector differences exceeding 0.25 D and 0.50 D were observed in 39.43% and 1.08% of eyes, respectively. CONCLUSIONS: This large-scale study underscores the similarity between mean K and TK values in healthy eyes, with rare clinical implications for IOL power calculation. Noteworthy differences were observed in astigmatism values between K and TK. Future investigations should delve into the practicality of TK values for astigmatism correction and their implications for surgical outcomes.
Subject(s)
Astigmatism , Lenses, Intraocular , Phacoemulsification , Humans , Tomography, Optical Coherence/methods , Astigmatism/diagnosis , Reproducibility of Results , Cornea , Biometry/methods , Retrospective Studies , Refraction, OcularABSTRACT
The purpose of this study was to investigate the depth-dependent biomechanical properties of the human corneal stroma under uniaxial tensile loading. Human stroma samples were obtained after the removal of Descemet's membrane in the course of Descemet's membrane endothelial keratoplasty (DMEK) transplantation. Uniaxial tensile tests were performed at three different depths: anterior, central, and posterior on 2 × 6 × 0.15 mm strips taken from the central DMEK graft. The measured force-displacement data were used to calculate stress-strain curves and to derive the tangent modulus. The study showed that mechanical strength decreased significantly with depth. The anterior cornea appeared to be the stiffest, with a stiffness approximately 18% higher than that of the central cornea and approximately 38% higher than that of the posterior layer. Larger variations in mechanical response were observed in the posterior group, probably due to the higher degree of alignment of the collagen fibers in the posterior sections of the cornea. This study contributes to a better understanding of the biomechanical tensile properties of the cornea, which has important implications for the development of new treatment strategies for corneal diseases. Accurate quantification of tensile strength as a function of depth is critical information that is lacking in human corneal biomechanics to develop numerical models and new treatment methods.
Subject(s)
Cornea , Corneal Diseases , Humans , Cornea/physiology , Corneal Stroma/physiology , Corneal Diseases/surgery , Mechanical Phenomena , Tensile Strength , Descemet Membrane/surgeryABSTRACT
The number of elective refractive surgeries is constantly increasing due to the drastic increase in myopia prevalence. Since corneal biomechanics are critical to human vision, accurate modeling is essential to improve surgical planning and optimize the results of laser vision correction. In this study, we present a numerical model of the anterior cornea of young patients who are candidates for laser vision correction. Model parameters were determined from uniaxial tests performed on lenticules of patients undergoing refractive surgery by means of lenticule extraction, using patient-specific models of the lenticules. The models also took into account the known orientation of collagen fibers in the tissue, which have an isotropic distribution in the corneal plane, while they are aligned along the corneal curvature and have a low dispersion outside the corneal plane. The model was able to reproduce the experimental data well with only three parameters. These parameters, determined using a realistic fiber distribution, yielded lower values than those reported in the literature. Accurate characterization and modeling of the cornea of young patients is essential to study better refractive surgery for the population undergoing these treatments, to develop in silico models that take corneal biomechanics into account when planning refractive surgery, and to provide a basis for improving visual outcomes in the rapidly growing population undergoing these treatments.
Subject(s)
Cornea , Corneal Stroma , Humans , Finite Element Analysis , Cornea/surgery , Corneal Stroma/surgeryABSTRACT
PURPOSE: To determine (1) if measurements of surgically induced astigmatism (SIA) as measured by keratometry (K) and total keratometry (TK) differ (2) if SIA affects the magnitude and/or meridian of keratometric astigmatism (3) if SIA evolves over time. SETTING: Tertiary care center. DESIGN: Retrospective data analysis. METHODS: A swept-source optical coherence tomography biometry dataset (IOLMaster700) consisting of 498 eyes (327 patients) from a tertiary care center was analyzed. For all eyes preoperative and postoperative biometric measurements at 1-month, 3-month, and 6-months postoperative visits were considered for vector analysis of SIA K and SIA TK . RESULTS: Centroids in right and left eyes were 0.26 diopters (D) @5 degrees/0.31 D @1 degree for SIA K and 0.27 D @4 degrees/0.34 D @1 degree for SIA TK . Centroids for difference vectors K-TK in right and left eyes were 0.02 D @ 176 degrees/0.03 D @6 degrees. The mean SIA magnitudes in right and left eyes were 0.48 ± 0.41 D and 0.50 ± 0.37 D for SIA K and 0.53 ± 0.42 D and 0.54 ± 0.40 D for SIA TK . In eyes with ATR astigmatism, an increase in postoperative astigmatism magnitude was more common than a decrease. More than 30% of eyes showed changes in the meridian of more than 15 degrees. CONCLUSIONS: Overall, we observed differences in K- and TK-derived SIA, and changes in SIA magnitude over time. For postsurgical interventions, postoperative astigmatism meridian values should be measured to base treatments. Astigmatism magnitude showed a tendency to decrease for steep-meridian incisions and to increase in flat-meridian incisions.
Subject(s)
Astigmatism , Cataract Extraction , Cataract , Phacoemulsification , Humans , Astigmatism/diagnosis , Astigmatism/etiology , Astigmatism/surgery , Lens Implantation, Intraocular/methods , Retrospective Studies , Cornea/surgery , Corneal Topography , Phacoemulsification/methodsABSTRACT
A 51-year-old man was referred for refractive surgery evaluation. Spectacle dependence and poor visual quality in both eyes was his chief complaint. He cannot tolerate contact lenses. Corrected distance visual acuity (CDVA) was 20/40 in both eyes. Manifest refraction was +5.25 -2.25 @ 90 (20/40) in the right eye and +6.25 -2.25 @ 105 (20/40) in the left eye. The patient had a history of radial keratotomy (RK) almost 30 years ago in both eyes and at the slitlamp presented 8 RK incisions, proportionally spaced between one another. All incisions were closed, and there were no relevant signs of scarring. The patient denied any history of ocular trauma, systemic disease, or medications. Corneal topography with different technologies revealed an irregular pattern with marked central flattening in both eyes, with some points below 30 diopters (D) (Supplemental Figures 1 and 2, available at http://links.lww.com/JRS/A862 and http://links.lww.com/JRS/A863, respectively). There were no signs of cataract, and fundus examination was normal. Optical coherence tomography (OCT) of the right eye revealed a more homogeneous thickness pattern, little variation between the thinnest and thickest areas, and adequate transparency (Figure 1JOURNAL/jcrs/04.03/02158034-202306000-00018/figure1/v/2023-05-31T172126Z/r/image-tiff). In the left eye, there is wide variability between the thinnest and thickest stromal points, with annular thinning and central thickening (Figure 2JOURNAL/jcrs/04.03/02158034-202306000-00018/figure2/v/2023-05-31T172126Z/r/image-tiff). Both eyes show marked epithelial irregularity. Considering this patient's current ocular status, how would you reach visual rehabilitation? Because he is contact lens intolerant, would you consider surface ablation, for example, photorefractive keratectomy (PRK) with mitomycin-C (MMC)? If that were the case, would you think of an optimized or a topography-guided (TG) treatment? Would you immediately consider a corneal transplant option? Would you instead consider a more conservative approach? Which one and why?
Subject(s)
Eye Abnormalities , Hyperopia , Keratotomy, Radial , Photorefractive Keratectomy , Male , Humans , Middle Aged , Keratotomy, Radial/adverse effects , Hyperopia/surgery , Hyperopia/etiology , Lasers, Excimer/therapeutic use , Photorefractive Keratectomy/methods , Eye Abnormalities/surgery , Cornea/surgery , Refraction, OcularABSTRACT
PURPOSE: To evaluate corneal stiffening of porcine corneas induced by corneal crosslinking (CXL) with constant irradiance as a function of total fluence. METHODS: Ninety corneas from freshly enucleated porcine eyes were divided into five groups of 18 eyes. Groups 1-4 underwent epi-off CXL using a dextran-based riboflavin solution and an irradiance of 18 mW/cm2, group 5 served as the control group. Groups 1 to 4 were treated with a total fluence of 20, 15, 10.8, and 5.4 J/cm2, respectively. Thereafter, biomechanical measurements were performed on 5 mm wide and 6 mm long strips using an uniaxial material tester. Pachymetry measurements were performed on each cornea. RESULTS: At 10% strain, the stress was 76, 56, 52, and 31% higher in groups 1-4, respectively compared to the control group. The Young's modulus was 2.85 MPa for group 1, 2.53 MPa for group 2, 2.46 MPa for group 3, 2.12 MPa for group 4, and 1.62 MPa for the control group. The difference between groups 1 to 4 and the control group 5 were statistically significant (p = <0.001; p = <0.001; p = <0.001; p = 0.021). In addition, group 1 showed significantly more stiffening than group 4 (p = <0.001), no other significant differences were found. Pachymetry measurements revealed no statistically significant differences among the five groups. CONCLUSION: Additional mechanical stiffening can be achieved by increasing the fluence of the CXL. There was no threshold detected up to 20 J/cm2. A higher fluence could compensate the weaker effect of accelerated or epi-on CXL procedures.
Subject(s)
Photosensitizing Agents , Ultraviolet Rays , Swine , Animals , Photosensitizing Agents/pharmacology , Cross-Linking Reagents/pharmacology , Collagen/pharmacology , Biomechanical Phenomena/physiology , Cornea , Riboflavin/pharmacology , Corneal Stroma , Corneal PachymetryABSTRACT
BACKGROUND: Information about corneal biomechanics is crucial for achieving satisfactory outcomes after surgical corneal interventions, e.g., for astigmatic keratotomies, but also to identify corneas that are at risk for postoperative complications such as corneal ectasia. Hitherto, approaches to characterize corneal biomechanics in an in vivo setting have yielded only minor success, demonstrating the unmet medical need for a diagnostic technique to measure ocular biomechanics. OBJECTIVE: This review shall explain the mechanism of Brillouin spectroscopy and summarize the current scientific knowledge for ocular tissue. METHODS: PubMed research of relevant experimental and clinical publications, as well as reporting of own experience using Brillouin spectroscopy. RESULTS: Brillouin spectroscopy can measure different biomechanical moduli with a high spatial resolution. Currently, available devices are able to detect focal corneal weakening, e.g., in keratoconus, as well as stiffening after corneal cross-linking. Also, the mechanical properties of the crystalline can be measured. Corneal anisotropy and hydration, together with the dependence on the angle of the incident laser beam in Brillouin spectroscopy, are challenges in the precise interpretation of measured data. A clear advantage in the detection of subclinical keratoconus compared to corneal tomography, however, has not been shown yet. CONCLUSION: Brillouin spectroscopy is a technique to characterize biomechanical properties of ocular tissue in vivo. Published results confirm ex vivo data of ocular biomechanics; however, further improvements in the acquisition and interpretation of measured data are required until this technique can be used in a clinically viable setting.
Subject(s)
Keratoconus , Ophthalmology , Humans , Keratoconus/surgery , Cornea , Corneal Cross-Linking , Spectrum Analysis/methodsABSTRACT
PURPOSE: To evaluate the accuracy of various variations of new-generation multivariate intraocular lens (IOL) power calculation using the Barrett Universal II, Castrop, Emmetropia Verifying Optical 2.0, Hill-Radial Basis Function 3.0, Kane, and PEARL-DGS formulas with and without optional biometric parameters. SETTING: Tertiary care academic medical center. DESIGN: Retrospective case series. Single-center study. METHODS: Inclusion of patients after uneventful cataract surgery implanting AU00T0 IOLs. Data from one eye per patient were randomly included. Eyes with a corrected distance visual acuity worse than 0.1 logMAR were excluded. IOLCON-optimized constants were used for all formulas other than the Castrop formula. The outcome measures were prediction error (PE) and absolute prediction error (absPE) for the 6 study formulas. RESULTS: 251 eyes from 251 patients were assessed. Excluding lens thickness led to statistically significant differences in absPE in several formulas. Leaving out horizontal corneal diameter did not impact absPE in several formulas. Differences in PE offset were observed between the various formula variations. CONCLUSIONS: When using multivariate formulas with an A-constant, including certain optional parameters is vital for optimal refractive results. Formula variations excluding certain biometric parameters need specifically optimized constants and do not perform similarly when using the constant of the respective formula using all parameters.
Subject(s)
Cataract Extraction , Lenses, Intraocular , Phacoemulsification , Humans , Retrospective Studies , Refraction, Ocular , Visual Acuity , Cataract Extraction/methods , Biometry/methods , Optics and Photonics , Axial Length, EyeABSTRACT
PURPOSE: The aim of this study was to compare the evolution of corneal pachymetry after customized corneal crosslinking (CXL) between Scheimpflug-based and optical coherence-based corneal tomography (OCT). METHODS: In this retrospective study, central corneal thickness (CCT), thinnest corneal thickness, and epithelial thickness of 33 eyes of 33 patients with keratoconus were measured preoperatively and 1, 3, and 12 months after customized CXL using the Pentacam HR and the MS-39. The mean pachymetry values of measurements were compared with a paired sample t test. Bland-Altman plots and 95% limits of agreement (LoA) were used to assess the agreement between the measurements of the 2 devices. RESULTS: The mean age of the participants was 29.7 ± 11.4 years. At baseline, the mean CCT measurements were equal with Pentacam HR (478.30 ± 36.77 µm) and MS-39 (478.46 ± 38.01 µm). After CXL, CCT obtained by Pentacam HR was 460.65 ± 38.69 µm, 464.65 ± 44.45 µm, and 476.77 ± 39.85 µm, and by MS-39 was 478.18 ± 39.50 µm, 472.89 ± 40.92 µm, and 479.51 ± 39.20 µm at 1, 3, and 12 months, respectively. Pentacam HR measured significantly lower CCT ( P < 0.05) at months 1 and 3 after CXL. The agreement was smallest between both devices at month 1 (95% LoA -59 to 24 µm) followed by month 3 (95% LoA: -41 to 23 µm). Epithelial thickness, measured with OCT alone, increased significantly at 1 month and regained preoperative levels at 3 months and thereafter. CONCLUSIONS: After CXL, corneal pachymetry significantly differs between OCT-based and Scheimpflug-based corneal tomography. Pentacam HR seems to underestimate pachymetry when haze is present.
Subject(s)
Cornea , Tomography, Optical Coherence , Humans , Adolescent , Young Adult , Adult , Corneal Pachymetry/methods , Tomography, Optical Coherence/methods , Retrospective Studies , Reproducibility of ResultsABSTRACT
PURPOSE: Corneal Crosslinking (CXL) strengthens the keratoconus cornea and prevents further disease progression. Modified crosslinking protocols and different riboflavin solutions have been proposed to optimize the procedure and improve treatment success. METHODS: PubMed research of relevant publications and report of own experiences with different CXL protocols. RESULTS: Accelerated CXL shows comparable efficiency with shorter surgery time and similar complication rates. Customized CXL provides improved results with faster epithelial healing. CXL in a hyperoxic environment seems to be a safe and effective transepithelial alternative with presumably less complications and fewer side effects. Thin corneas (<400 µm) can be treated safely by corneal swelling using hypoosmolar riboflavin solutions and reducing the applied UV-energy. The combination of CXL with photorefractive keratectomy (PRK) can be considered in patients with contact lens intolerance improving visual acuity, however, with increased risk of visual loss compared to CXL alone. Two-Photon (2Ph) CXL is a promising new technology enabling three-dimensional CXL. DISCUSSION: Recently developed CXL protocols offer advantages over the standard "Dresden-protocol" and should be considered in patients with progressive keratectasia.
Subject(s)
Keratoconus , Photochemotherapy , Humans , Photosensitizing Agents/therapeutic use , Photochemotherapy/methods , Refraction, Ocular , Corneal Topography , Cornea/surgery , Riboflavin/therapeutic use , Keratoconus/drug therapy , Cross-Linking Reagents/pharmacology , Cross-Linking Reagents/therapeutic use , Ultraviolet RaysABSTRACT
We report a case of acute corneal hydrops followed by corneal perforation five years after corneal cross-linking for keratoconus. A healthy 24-year-old female patient underwent Dresden protocol cross-linking in her left eye due to advanced keratoconus. After five years of a stable cornea, she returned with epiphora, blurred vision, and a soft left eye. Acute hydrops and corneal perforation were diagnosed. There was no history of pregnancy, atopy, eye rubbing, trauma, or contact lens use. Local antibiotic and eye patching were applied. Three months after the resolution of the acute episode, she retained useful visual acuity with no need for further surgery. Although cross-linking efficiently halts keratoconus, progression can occur, leading to corneal hydrops and perforation, even in the absence of any risk factors.
Subject(s)
Corneal Edema , Corneal Perforation , Keratoconus , Humans , Female , Young Adult , Adult , Keratoconus/complications , Keratoconus/drug therapy , Keratoconus/surgery , Corneal Perforation/etiology , Corneal Cross-Linking , Edema/complications , Corneal Edema/etiology , Corneal TopographyABSTRACT
ABSTRACT We report a case of acute corneal hydrops followed by corneal perforation five years after corneal cross-linking for keratoconus. A healthy 24-year-old female patient underwent Dresden protocol cross-linking in her left eye due to advanced keratoconus. After five years of a stable cornea, she returned with epiphora, blurred vision, and a soft left eye. Acute hydrops and corneal perforation were diagnosed. There was no history of pregnancy, atopy, eye rubbing, trauma, or contact lens use. Local antibiotic and eye patching were applied. Three months after the resolution of the acute episode, she retained useful visual acuity with no need for further surgery. Although cross-linking efficiently halts keratoconus, progression can occur, leading to corneal hydrops and perforation, even in the absence of any risk factors.
RESUMO Este é o relato de um caso de hidropisia aguda seguida de perfuração corneana cinco anos após reticulação corneana para ceratocone. Uma paciente saudável de 24 anos foi submetida a reticulação corneana no olho esquerdo pelo protocolo de Dresden, devido a um ceratocone avançado. Após cinco anos com a córnea estável, a paciente retornou com epífora, visão turva e amolecimento do olho esquerdo. Foram diagnosticadas hidropisia aguda e perfuração corneana. A paciente não tinha história de gravidez, atopia, fricção ocular, trauma ou uso de lentes de contato. Foram aplicados um antibiótico local e um tampão oftalmológico. Três meses após a resolução do episódio agudo, ela manteve uma acuidade visual útil, sem necessidade de novas cirurgias. Embora a reticulação interrompa de forma eficiente o ceratocone, pode ocorrer progressão, levando a hidropisia e perfuração da córnea, mesmo na ausência de fatores de risco.
ABSTRACT
The porcine cornea is a standard animal model in ophthalmic research, making its biomechanical characterization and modeling important to develop novel treatments such as crosslinking and refractive surgeries. In this study, we present a numerical model of the porcine cornea based on experimental measurements that captures both the depth dependence and orientation dependence of the mechanical response. The mechanical parameters of the established anisotropic hyperelastic material models of Gasser, Holzapfel and Ogden (HGO) and Markert were determined using tensile tests. Corneas were cut with a femtosecond laser in the anterior (100 µm), central (350 µm), and posterior (600 µm) regions into nasal-temporal, superior-inferior, and diagonal strips of 150 µm thickness. These uniformly thick strips were tested at a low speed using a single-axis testing machine. The results showed that the corneal mechanical properties remained constant in the anterior half of the cornea regardless of orientation, but that the material softened in the posterior layer. These results are consistent with the circular orientation of collagen observed in porcine corneas using X-ray scattering. In addition, the parameters obtained for the HGO model were able to reproduce the published inflation tests, indicating that it is suitable for simulating the mechanical response of the entire cornea. Such a model constitutes the basis for in silico platforms to develop new ophthalmic treatments. In this way, researchers can match their experimental surrogate porcine model with a numerical counterpart and validate the prediction of their algorithms in a complete and accessible environment.