ABSTRACT
Reuse of electronic wastes is a critical aspect for a more sustainable circular economy as it provides the simplest and most direct route to extend the lifespan of non-renewable resources. Herein, the distinctive surface and micro topographical features of computer electronic-plastic (E-plastic) scraps were unconventionally repurposed as a substrate material to guide the growth and differentiation of human adipose-derived mesenchymal stem cells (ADSCs). Specifically, the E-plastics were scavenged from discarded computer components such as light diffuser plate (polyacrylates), prismatic sheet (polyethylene terephthalate), and keyboards (acrylonitrile butadiene styrene) were cleaned, sterilized, and systematically characterized to determine the identity of the plastics, chemical constituents, surface features, and leaching characteristics. Multiparametric analysis revealed that all the E-plastics could preserve stem-cell phenotype and maintain cell growth over 2 weeks, rivalling the performance of commercial tissue-culture treated plates as cell culture plastics. Interestingly, compared to commercial tissue-culture treated plastics and in a competitive adipogenic and osteogenic differentiation environment, ADSCs cultured on the keyboard and light diffuser plastics favoured bone cells formation while the grating-like microstructures of the prismatic sheet promoted fat cells differentiation via the process of contact guidance. Our findings point to the real possibility of utilizing discarded computer plastics as a "waste-to-resource" material to programme stem cell fate without further processing nor biochemical modification, thus providing an innovative second-life option for E-plastics from personal computers.
Subject(s)
Osteogenesis , Plastics , Cell Differentiation , Computers , Electronics , Humans , Stem CellsABSTRACT
The increasing amount of e-waste plastics needs to be disposed of properly, and removing the brominated flame retardants contained in them can effectively reduce their negative impact on the environment. In the present work, TBBPA-bis-(2,3-dibromopropyl ether) (TBBPA-DBP), a novel brominated flame retardant, was extracted by ultrasonic-assisted solvothermal extraction process. Response Surface Methodology (RSM) achieved by machine learning (support vector regression, SVR) was employed to estimate the optimum extraction conditions (extraction time, extraction temperature, liquid to solid ratio) in methanol or ethanol solvent. The predicted optimum conditions of TBBPA-DBP were 96 min, 131 mL g-1, 65 °C, in MeOH, and 120 min, 152 mL g-1, 67 °C in EtOH. And the validity of predicted conditions was verified.
Subject(s)
Ether , Flame Retardants , Ethers , Machine Learning , PolymersABSTRACT
3D cellular spheroids/microcarriers (100 µm-1 mm) are widely used in biomanufacturing, and non-invasive biosensors are useful to monitor cell quality in bioprocesses. In this work, a novel microfluidic approach for label-free and continuous-flow monitoring of single spheroid/microcarrier (hydrogel and Cytodex) based on electrical impedance spectroscopy using co-planar Field's metal electrodes is reported. Through numerical simulation and experimental validation, two unique impedance signatures (|ZLF | (60 kHz), |ZHF | (1 MHz)) which are optimal for spheroid growth and viability monitoring are identified. Using a closed-loop recirculation system, it is demonstrated that |ZLF | increases with breast cancer (MCF-7) spheroid biomass, while higher opacity (impedance ratio |ZHF |/|ZLF |) indicates cell death due to compromised cell membrane. Anti-cancer drug (paclitaxel)-treated spheroids also exhibit lower |ZLF | with increased cell dissociation. Interestingly, impedance characterization of adipose-derived mesenchymal stem cell differentiation on Cytodex microcarriers reveals that adipogenic cells (higher intracellular lipid content) exhibit higher impedance than osteogenic cells (more conductive due to calcium ions) for both microcarriers and single cell level. Taken together, the developed platform offers great versatility for multi-parametric analysis of spheroids/microcarriers at high throughput (≈1 particle/s), and can be readily integrated into bioreactors for long-term and remote monitoring of biomass and cell quality.
Subject(s)
Mesenchymal Stem Cells , Microfluidics , Cell Differentiation , Electric Impedance , Spheroids, CellularABSTRACT
Plastics in waste electronics (E-plastics) account for approximately 20% of the entire global electronic waste (E-waste) stream. Most of the E-plastics are not recycled as the presence of toxic additives (e.g. heavy metals, brominated flame retardants (BFRs), antimony, etc.) have associated environmental and health concerns. However, the majority of the studies are focused on quantitative assessment of the toxic constituents in E-plastics, while empirical information regarding the potential toxic effects in humans is largely lacking. To gain a deeper appreciation into the toxicological profile of E-plastics, in situ time-dependent exposures of 6 different human cell lines to a panel of 8 representative E-plastics recovered from liquid crystal displays (LCD), keyboards, screen frames, and wire insulators were conducted. Although several hazardous elements (e.g. Pb, As, Sb, Zn, Cu, etc) were detected at concentrations that far exceed the limit values permitted by the Restriction of Hazardous Substances Directive and EU Directives in the panel E-plastics, in-depth analysis of the 144 unique cell viability data points and live-dead staining experiments suggest that the acute and sub-chronic toxic effects of E-plastics in direct contact with human cells are negligible. These observations agreed with the inductively coupled plasma-optical emission spectrometry data, which revealed that leaching of these toxic additives into the biological milieu is not sufficiently high to trigger a cytotoxic response up to a continuous culture period of 2 weeks. The novel insights gained from this study are posited to further clarify the uncertainty associated with the safety and circular economy implementation of E-plastics.
Subject(s)
Electronic Waste , Flame Retardants , Metals, Heavy , Electronic Waste/analysis , Flame Retardants/toxicity , Humans , Plastics/toxicity , RecyclingABSTRACT
Exposure to inhaled anthropogenic nanomaterials (NM) with dimension <100 nm has been implicated in numerous adverse respiratory outcomes. Although studies have identified key NM physiochemical determinants of pneumonic nanotoxicity, the complex interactive and cumulative effects of NM exposure, especially in individuals with preexisting inflammatory respiratory diseases, remain unclear. Herein, the susceptibility of primary human small airway epithelial cells (SAEC) exposed to a panel of reference NM, namely, CuO, ZnO, mild steel welding fume (MSWF), and nanofractions of copier center particles (Nano-CCP), is examined in normal and tumor necrosis factor alpha (TNF-α)-induced inflamed SAEC. Compared to normal SAEC, inflamed cells display an increased susceptibility to NM-induced cytotoxicity by 15-70% due to a higher basal level of intracellular reactive oxygen species (ROS). Among the NM screened, ZnO, CuO, and Nano-CCP are observed to trigger an overcompensatory response in normal SAEC, resulting in an increased tolerance against subsequent oxidative insults. However, the inflamed SAEC fails to adapt to the NM exposure due to an impaired nuclear factor erythroid 2-related factor 2 (Nrf2)-mediated cytoprotective response. The findings reveal that susceptibility to pulmonary nanotoxicity is highly dependent on the interplay between NM properties and inflammation of the alveolar milieu.
Subject(s)
Epithelial Cells , Inflammation , Lung , Nanostructures , Environmental Exposure , Epithelial Cells/drug effects , Humans , Lung/drug effects , Nanostructures/toxicity , Reactive Oxygen Species/metabolismABSTRACT
Laponite nanoparticles have attracted attention in the tissue engineering field for their protein interactions, gel-forming properties, and, more recently, osteogenic bioactivity. Despite growing interest in the osteogenic properties of Laponite, the application of Laponite colloidal gels to host the osteogenic differentiation of responsive stem cell populations remains unexplored. Here, the potential to harness the gel-forming properties of Laponite to generate injectable bioactive microenvironments for osteogenesis is demonstrated. A diffusion/dialysis gelation method allows the rapid formation of stable transparent gels from injectable, thixotropic Laponite suspensions in physiological fluids. Upon contact with buffered saline or blood serum, nanoporous gel networks exhibiting, respectively, fivefold and tenfold increases in gel stiffness are formed due to the reorganization of nanoparticle interactions. Laponite diffusion gels are explored as osteogenic microenvironments for skeletal stem cell containing populations. Laponite films support cell adhesion, proliferation, and differentiation of human bone marrow stromal cells in 2D. Laponite gel encapsulation significantly enhances osteogenic protein expression compared with 3D pellet culture controls. In both 2D and 3D conditions, cell associated mineralization is strongly enhanced. This study demonstrates that Laponite diffusion gels offer considerable potential as biologically active and clinically relevant bone tissue engineering scaffolds.
Subject(s)
Gels/chemistry , Osteogenesis/physiology , Silicates/chemistry , Cell Adhesion/physiology , Cell Differentiation/physiology , Cell Proliferation/physiology , Cells, Cultured , Cellular Microenvironment/physiology , Humans , Mesenchymal Stem Cells/cytology , Tissue Engineering/methodsABSTRACT
ARPE-19 and Y79 cells were precisely and effectively delivered to form an in vitro retinal tissue model via 3D cell bioprinting technology. The samples were characterized by cell viability assay, haematoxylin and eosin and immunofluorescent staining, scanning electrical microscopy and confocal microscopy, and so forth. The bioprinted ARPE-19 cells formed a high-quality cell monolayer in 14 days. Manually seeded ARPE-19 cells were poorly controlled during and after cell seeding, and they aggregated to form uneven cell layer. The Y79 cells were subsequently bioprinted on the ARPE-19 cell monolayer to form 2 distinctive patterns. The microvalve-based bioprinting is efficient and accurate to build the in vitro tissue models with the potential to provide similar pathological responses and mechanism to human diseases, to mimic the phenotypic endpoints that are comparable with clinical studies, and to provide a realistic prediction of clinical efficacy.
Subject(s)
Bioprinting/methods , Microtechnology , Models, Biological , Photoreceptor Cells, Vertebrate/cytology , Adult , Cell Count , Cell Line , Cell Survival , Epithelial Cells/cytology , Epithelial Cells/ultrastructure , Humans , Photoreceptor Cells, Vertebrate/ultrastructureABSTRACT
The efficient delivery of bioactive molecules via rationally designed nanoparticles is an important focus in regenerative medicine. The yolk shell nanocomposite particles described herein are composed of silk fibroin movable cores formed within voided calcium carbonate shells to load and control the release of labile cytokines. These particles are excellent carrier vehicles of potent molecules as they sustained the release of bioactive Bone Morphogenetic Protein 2 (BMP-2) for more than 28 days in vitro. Implantation into bone defects in rabbits corroborates the in vitro results and also reveals that upon contact with phosphate containing body fluids, implanted yolk shell particles agglomerate and transform into a filler that adapts to defect contour to further act as an absorbable hemostatic agent. Taken together, the fabrication of these yolk shell particle-based "bone fillers" could expand the horizon for the development of newer generations of advanced bioactive materials in tissue regeneration applications.
Subject(s)
Bone Morphogenetic Protein 2/administration & dosage , Bone Regeneration , Calcium Carbonate , Drug Carriers , Nanocomposites , Animals , Cells, Cultured , Fibroins , Mesenchymal Stem Cells , RabbitsABSTRACT
In this article, mouse fibroblast cells (L929) were seeded on 2%, 5%, and 10% alginate hydrogels, and they were also bio-printed with 2%, 5%, and 10% alginate solutions individually to form constructs. The elastic and viscous moduli of alginate solutions, their interior structure and stiffness, interactions of cells and alginate, cell viability, migration and morphology were investigated by rheometer, MTT assay, scanning electron microscope (SEM), and fluorescent microscopy. The three types of bio-printed scaffolds of distinctive stiffness were prepared, and the seeded cells showed robust viability either on the alginate hydrogel surfaces or in the 3D bio-printed constructs. Majority of the proliferated cells in the 3D bio-printed constructs weakly attached to the surrounding alginate matrix. The concentration of alginate solution and hydrogel stiffness influenced cell migration and morphology, moreover the cells formed spheroids in the bio-printed 10% alginate hydrogel construct. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 1009-1018, 2017.
Subject(s)
Alginates/chemistry , Fibroblasts/metabolism , Hydrogels/chemistry , Materials Testing , Printing, Three-Dimensional , Tissue Scaffolds/chemistry , Animals , Cell Line , Cell Survival , Fibroblasts/cytology , Glucuronic Acid/chemistry , Hexuronic Acids/chemistry , MiceABSTRACT
In this article, a hybrid retina construct was created via three-dimensional (3D) bioprinting technology. The construct was composed of a PCL ultrathin membrane, ARPE-19 cell monolayer and Y79 cell-laden alginate/pluronic bioink. 3D bioprinting technology was applied herein to deliver the ARPE-19 cells and Y79 cell-laden bioink to ensure homogeneous ARPE-19 cell seeding; subsequently, two distinctive Y79 cell-seeding patterns were bioprinted on top of the ARPE-19 cell monolayer. The bioprinted ARPE-19 cells were evaluated by prestoblue assay, F-actin, and hematoxylin/eosin (HE) staining, and then the cells were observed under laser scanning and invert microscopy for 14 days. The Y79 cells in alginate/pluronic bioink after bioprinting had been closely monitored for 7 days. Live/dead assay and scanning electrical microscopy (SEM) were employed to investigate Y79 cell viability and morphology. Both the ARPE-19 and Y79 cells were in excellent condition, and the successfully bioprinted retina model could be utilized in drug delivery, disease mechanism and treatment method discoveries.
ABSTRACT
Tissue engineering of a biological osteochondral multilayered construct with a cartilage-interface subchondral bone layer is a key challenge. This study presented a rabbit bone marrow stromal cell (BMSC)/silk fibroin scaffold-based co-culture approach to generate tissue-engineered osteochondral grafts with an interface. BMSC-seeded scaffolds were first cultured separately in osteogenic and chondrogenic stimulation media. The two differentiated pieces were then combined using an RADA self-assembling peptide and subsequently co-cultured. Gene expression, histological and biochemical analyses were used to evaluate the multilayered structure of the osteochondral graft. A complete osteochondral construct with a cartilage-subchondral bone interface was regenerated and BMSCs were used as the only cell source for the osteochondral construct and interface regeneration. Furthermore, in the intermediate region of co-cultured samples, hypertrophic chondrogenic gene markers type X collagen and MMP-13 were found on both chondrogenic and osteogenic section edges after co-culture. However, significant differences gene expression profile were found in distinct zones of the construct during co-culture and the section in the intermediate region had significantly higher hypertrophic chondrocyte gene expression. Biochemical analyses and histology results further supported this observation. This study showed that specific stimulation from osteogenic and chondrogenic BMSCs affected each other in this co-culture system and induced the formation of an osteochondral interface. Moreover, this system provided a possible approach for generating multilayered osteochondral constructs.
Subject(s)
Bone Marrow Cells/cytology , Chondrogenesis , Mesenchymal Stem Cells/cytology , Peptides/pharmacology , Silk/pharmacology , Tissue Scaffolds/chemistry , Animals , Bombyx , Bone Marrow Cells/drug effects , Cell Differentiation/drug effects , Chondrogenesis/drug effects , Coculture Techniques , Extracellular Matrix/drug effects , Extracellular Matrix/metabolism , Extracellular Matrix/ultrastructure , Gene Expression Regulation/drug effects , Glycosaminoglycans/metabolism , Immunohistochemistry , Mesenchymal Stem Cells/drug effects , Osteogenesis/drug effects , RabbitsABSTRACT
Silk is a versatile and established biomaterial for various tissue engineering purposes. However, it also exhibits strong autofluorescence signals-thereby hindering fluorescence imaging analysis of cells and proteins on silk-derived biomaterials. Sudan Black B (SB) is a lysochrome dye commonly used to stain lipids in histology. It has also been reported to be able to quench autofluorescence of tissues in histology and has been tested on artificial biomedical polymers in recent years. It was hypothesized that SB would exert similar quenching effects on silk, modulating the autofluorescence signals, and thereby enabling improved imaging analysis of cells and molecules of interests. The quenching effect of SB on the intrinsic fluorescence properties of silk and on commercial fluorescent dyes were first investigated in this study. SB was then incorporated into typical fluorescence-based staining protocols to study its effectiveness in improving fluorescence-based imaging of the cells and proteins residing with the silk-based biomaterials. Silk processed into various forms of biomaterials (e.g., films, sponges, fibers, and electrospun mats) was seeded with cells and cultured in vitro. At sacrificial time points, specimens were harvested, fixed, and prepared for fluorescence staining. SB, available commercially as a powder, was dissolved in 70% ethanol (0.3% [w/v]) to form staining solutions. SB treatment was introduced at the last step of typical immunofluorescence staining protocols for 15-120 min. For actin staining protocols by phalloidin toxin, SB staining solutions were added before and after permeabilization with Triton-X for 15-30 min. Results showed that ideal SB treatment duration is about 15 min. Apart from being able to suppress the autofluorescence of silk, this treatment duration was also not too long to adversely affect the fluorescent labeling probes used. The relative improvement brought about by SB treatment was most evident in the blue and green emission wavelengths compared with the red emission wavelength. This study has showed that the use of SB is a cost and time effective approach to enhance fluorescence-based imaging analyses of cell-seeded silk biomaterials, which otherwise would have been hindered by the unmodulated autofluorescence signals.
Subject(s)
Biocompatible Materials/pharmacology , Imaging, Three-Dimensional , Silk/pharmacology , Adipose Tissue/cytology , Animals , Azo Compounds/pharmacology , Bombyx , Fibronectins/metabolism , Fluorescence , Fluorescent Dyes/metabolism , Mesenchymal Stem Cells/cytology , Mesenchymal Stem Cells/drug effects , Mesenchymal Stem Cells/ultrastructure , Naphthalenes , Rabbits , Tissue Scaffolds/chemistryABSTRACT
During minimally invasive orthopedic surgeries, surgical intervention is required at two stages; to attain hemostasis and subsequently to implant the bone graft or its substitute. There is an apparent need for a material which can simultaneously control bone bleeding and provide support for bone repair. In this work, a moldable putty, which can be applied to bone defects (usually irregular in shape), was developed to address this need. It comprises of a hemostatic factor thrombin, osteoinductive "yolk-shell" particles containing bone growth factor (BMP-2), and an osteoconductive component hydroxyapatite. The yolk shell particles allowed controlled release of BMP-2 and showed significantly enhanced osteogenic differentiation of C2C12 (mouse myoblast) cells as demonstrated by increased alkaline phosphatase (ALP) activity and relative gene expressions of osteogenic differentiation markers. These particles were assembled into a moldable putty by mixing them with hydroxyapatite and silk fibroin solution (binding agent) supplemented with thrombin. The putty showed non-cytotoxicity, hemostatic ability, sustained release of BMP-2 and induced increased mineralization in C2C12 cells. This putty, if applied to bone defects during surgeries, may help attain hemostasis and may enhance bone repair by providing sustained release of bone growth factors.
Subject(s)
Bone Morphogenetic Protein 2/pharmacokinetics , Fibroins/chemistry , Fibroins/pharmacology , Hemostatics/pharmacology , Nanoparticles/chemistry , Alkaline Phosphatase/metabolism , Animals , Biochemistry/methods , Bombyx/chemistry , Bone Morphogenetic Protein 2/chemistry , Bone Morphogenetic Protein 2/genetics , Bone Regeneration/drug effects , Cell Differentiation/drug effects , Durapatite/chemistry , Hemostatics/chemistry , Mice , Myoblasts, Skeletal/drug effects , Thrombin/chemistryABSTRACT
Poly (vinyl) alcohol (PVA) cryogels are reported in the literature for application in nucleus pulposus (NP) replacement strategies. However, these studies are mainly limited to acellular approaches-in part due to the high hydrophilicity of PVA gels that renders cellular adhesion difficult. Silk is a versatile biomaterial with excellent biocompatibility. We hypothesize that the incorporation of silk with PVA will (i) improve the cell-hosting abilities of PVA cryogels and (ii) allow better tailoring of physical properties of the composite cryogels for an NP tissue engineering purpose. 5% (wt/vol) PVA is blended with 5% silk fibroin (wt/vol) to investigate the effect of silk : PVA ratios on the cryogels' physical properties. Results show that the addition of silk results in composite cryogels that are able to swell to more than 10 times its original dry weight and rehydrate to at least 70% of its original wet weight. Adding at least 20% silk significantly improves surface hydrophobicity and is correlated with an improvement in cell-hosting abilities. Cell-seeded cryogels also display an increment in compressive modulus and hoop stress values. In all, adding silk to PVA creates cryogels that can be potentially used as NP replacements.
Subject(s)
Biocompatible Materials/chemistry , Fibroins/chemistry , Intervertebral Disc Degeneration/physiopathology , Intervertebral Disc Degeneration/therapy , Intervertebral Disc Displacement/physiopathology , Intervertebral Disc Displacement/therapy , Intervertebral Disc/physiopathology , Polyvinyl Alcohol/chemistry , Cell Adhesion , Cell Proliferation , Cross-Linking Reagents/chemistry , Cryogels/chemistry , DNA/chemistry , Humans , Hydrophobic and Hydrophilic Interactions , Materials Testing , Microscopy, Electron, Scanning , Porosity , Stress, Mechanical , Surface Properties , Tissue Engineering/methods , Water/chemistryABSTRACT
Application of bone morphogenetic protein 2 (BMP-2) currently faces its challenges, and its efficacy of delivery has to be improved. The proper dosage of the powerful bioactive molecule is still under discussion and needs to be investigated further. In this work, pure silk fibroin particles and particles with calcium carbonate encrustation (complex particles) are designed, developed, and functionalized by BMP-2. These are used to deliver the bioactive molecule to mesenchymal stem cells (MSCs) to induce osteogenic differentiation. Results are compared with those of control groups of BMP-2 carriers under the same condition. Silk fibroin-based particles with size and component variations are prepared by self-assembly, desolvation, and soft template formation to improve BMP-2 loading efficiency. Results show that the particles significantly enhance osteogenic differentiation of MSCs, which is evident in the high ALP enzyme activity as well as the increased level of expression of osteogenic genes. Specifically, the combination of calcium compound and BMP-2 in the silk fibroin-calcium carbonate complex particles synergistically enhances osteogenesis. Release tests and mathematical modeling are applied to describe BMP-2 dissolution profiles, and the release mechanism is based on diffusion and polymer chain relaxation. In summary, the particles show high efficacies of BMP-2 delivery, and introduction of the complex particle can progressively enhance osteogenesis.
Subject(s)
Bone Morphogenetic Protein 2/chemistry , Fibroins/chemistry , Nanocapsules/chemistry , Alkaline Phosphatase/metabolism , Animals , Bombyx , Bone Morphogenetic Protein 2/pharmacology , Bone Regeneration , Calcium Carbonate/chemistry , Cell Survival/drug effects , Cells, Cultured , Humans , Kinetics , Mesenchymal Stem Cells/drug effects , Mesenchymal Stem Cells/physiology , Microscopy, Electron, Transmission , Nanocapsules/ultrastructure , Particle Size , Rabbits , Spectroscopy, Fourier Transform InfraredABSTRACT
In this article, low crystallinity hydroxyapatite (LHA) is developed and utilized to modify silk fibroin scaffolds which are applied to repair bone/ligament defects successfully. It can promote osteogenesis which is authenticated through in vitro and in vivo tests. The scaffold is an efficient carrier, supporting cell proliferation and differentiation. Meanwhile, cytocompatibility and osteoblastic gene expressions (RUNX2 and osteocalcin, for example) of rabbit's bone marrow derived mesenchymal stem cells (MSCs) are significantly boosted on LHA/silk scaffold. Further, for animal trial, almost 60% of bone volume and 80% of original mechanical strength are recovered after 4 months' bone/ligament regeneration in bone tunnel of rabbit model, where significant amount of bone tissue regeneration is also confirmed by data of histological evaluation and micro computed tomography (µ-CT). Hence, the invented scaffold is applicable for ligament/bone regeneration in future lager animal and clinical trials.
Subject(s)
Anterior Cruciate Ligament/physiology , Bone and Bones/physiology , Calcium Phosphates/pharmacology , Implants, Experimental , Osseointegration/physiology , Animals , Anterior Cruciate Ligament/diagnostic imaging , Anterior Cruciate Ligament/drug effects , Bone Regeneration/drug effects , Bone and Bones/diagnostic imaging , Bone and Bones/drug effects , Calcium/metabolism , Cell Shape/drug effects , Cell Survival/drug effects , Collagen Type I/genetics , Collagen Type I/metabolism , Core Binding Factor Alpha 1 Subunit/genetics , Core Binding Factor Alpha 1 Subunit/metabolism , Crystallization , Durapatite/pharmacology , Fibroins , Gene Expression Regulation/drug effects , Mesenchymal Stem Cells/cytology , Mesenchymal Stem Cells/drug effects , Mesenchymal Stem Cells/ultrastructure , Osteocalcin/genetics , Osteocalcin/metabolism , Osteonectin/genetics , Osteonectin/metabolism , Rabbits , Radiography , Staining and Labeling , Tissue Scaffolds/chemistrySubject(s)
Bone Morphogenetic Protein 2/administration & dosage , Drug Carriers , Polymers , Animals , Bone Morphogenetic Protein 2/pharmacology , Cell Differentiation/drug effects , Mesenchymal Stem Cells/cytology , Mesenchymal Stem Cells/metabolism , Rabbits , Recombinant Proteins/administration & dosage , Recombinant Proteins/pharmacologyABSTRACT
In this article, silk fibroin particles with average diameter of 980 nm were fabricated via self assembly. Exceptional loading efficiency and release patterns of hydrophobic and protein drugs were observed. Furthermore, smoother release patterns were observed with increase loading of the hydrophobic and protein model drugs, only about 23% FITC-BSA and 34% RhB were released from the silk particles at their highest corresponding loading in 50 days. Most importantly, osteoblasts' viability was augmented during co-culture with silk fibroin particles, as shown by Alamar Blue assay. Attachment of the particles and delivery of model drugs to cells were confirmed by fluorescence images and flow cytometry. Hence, the silk fibroin particles could be potential biomaterial for application in controlled release and pharmaceutics.
Subject(s)
Drug Carriers/chemistry , Fibroins/chemistry , Animals , Cell Proliferation/drug effects , Cell Survival/drug effects , Dextrans/chemistry , Drug Carriers/pharmacology , Drug Compounding , Emulsifying Agents/chemistry , Fibroins/pharmacology , Flow Cytometry , Fluorescein-5-isothiocyanate/analogs & derivatives , Fluorescein-5-isothiocyanate/chemistry , Fluorescein-5-isothiocyanate/pharmacology , Fluorescence , Fluorescent Dyes/chemistry , Fluorescent Dyes/pharmacology , Hydrophobic and Hydrophilic Interactions , Kinetics , Materials Testing , Models, Chemical , Osteoblasts/cytology , Osteoblasts/drug effects , Polyvinyl Alcohol/chemistry , Rabbits , Rhodamines/chemistry , Rhodamines/pharmacology , Serum Albumin, Bovine/chemistry , Serum Albumin, Bovine/pharmacologyABSTRACT
The purpose of this study is to explore and develop biodegradable scaffold for bone regeneration or tissue engineering with the capacity of controlled drug delivery. Ceftazidime as a model drug was encapsulated in ethyl cellulose (EC) microspheres, which were subsequently incorporated in a hydroxyapatite/polyurethane (HA/PU) composite scaffold to generate an antibiotic drug delivery system. HA/PU scaffolds had an interconnected pore network with an average porosity of about 83%. The presence of microspheres in the composite scaffolds was confirmed by scanning electron microscopy. The drug-loaded EC microspheres were uniformly distributed in the HA/PU scaffold matrix and showed no significant effect on the pore structure of the scaffold. Incorporation of microspheres into scaffolds significantly reduced the initial burst release, and the system exhibited a sustained release of the model drug for up to 60 days. Moreover, the scaffold with drug-loaded microspheres was proved to be an effective drug delivery system with good cytocompatibility and antibacterial properties. The novel drug-loaded microsphere/scaffold composites developed in this study are promising to serve as vehicles for controlled drug delivery in bone regeneration or bone tissue engineering.
Subject(s)
Bone Regeneration/drug effects , Drug Delivery Systems/methods , Durapatite/therapeutic use , Polyurethanes/therapeutic use , Tissue Scaffolds/chemistry , Anti-Bacterial Agents/administration & dosage , Ceftazidime/administration & dosage , Cell Line , Cellulose/analogs & derivatives , Humans , Microspheres , Osteoblasts/cytology , Tissue Engineering/methodsABSTRACT
In this article gentamicin (GM) impregnated microspheres were used to extend the drug release time for the treatment of chronic osteomyelitis. The granules were prepared in solution and consisted of nanohydroxyapatite (nHA), chitosan (CS) and GM loaded ethyl cellulose (EC) microspheres. A rabbit model with chronic osteomyelitis was made by using staphylococcus aureus and morrhuate sodium and special inspection methods were used to test the curative effects of the granules, such as microbiological investigations, tissue, and X-ray observations. The granules were provided with excellent drug release properties, 49 days in vitro and 45 days in vivo, moreover, they showed almost no cytotoxic for fibroblast and osteoblast. The findings indicated that the GM-impregnated CS/nHA/EC microspheres granules showed outstanding curative effect. Generally, it can be concluded that the granules containing GM impregnated microspheres may be used effectively in the treatment of the chronic osteomyelitis.