ABSTRACT
Chronic wounds (CWs) treatment still represents a demanding medical challenge. Several intrinsic physiological signals (i.e., pH) help to stimulate and support wound healing. CWs, in fact, are characterized by a predominantly alkaline pH of the exudate, which acidifies as the wound heals. Therefore, pH-responsive wound dressings hold great potential owing to their capability of tuning their functions according to the wound conditions. Herein, porous chitosan (CS)-based scaffolds loaded with cellulose nanocrystals (CNCs) and graphene oxide (GO) were successfully fabricated using a freeze-drying method. CNCs were extracted from bagasse pulps fibers through acid hydrolysis. GO was synthesised by Hummer's method. The scaffolds were then ionically cross-linked using the amino acid L-Arginine (Arg), as a bioactive agent, and tested as potential pH-responsive wound dressing. Notably, the effect of CNCs and GO singly and simultaneously loaded within the CS-Arg scaffolds was investigated. The modulation of CNCs and GO content within CS-Arg scaffolds facilitated the development of scaffolds with an optimal pH-dependent swelling ratio capability and extended degradation time. Furthermore, CS/CNC/GO-Arg scaffolds exhibited tuned biological features, in terms of antimicrobial activity, cellular proliferation/migration ability, and the expression of extracellular matrix specific markers (i.e., elastin and collagen I) related to wound healing in human dermal fibroblasts.
ABSTRACT
Mixtures containing ß-glucans were extracted from barley, under both mild and high alkaline conditions, to prepare biodegradable films (MA and HA, respectively), as natural dressings with intrinsic therapeutic properties. An in-depth characterization was performed to evaluate the impact of mild and high alkaline conditions on chemical, physicochemical, and biological features for potential use in wound treatments. Both MA and HA films exhibited a good ability to absorb water and simulate wound fluid, which helps maintain optimal tissue hydration. Moreover, their oxygen permeability (147.6 and 16.4â¯cm3â¯×⯵m/m2â¯×â¯24â¯hâ¯×â¯Paâ¯×â¯107, respectively) appeared adequate for the intended application. Biocompatibility tests showed that the films do not harm human dermal fibroblasts. Impressively, they promote cell attachment and growth, with MA having a stronger effect due to its higher ß-glucan content. Furthermore, MA films can modulate macrophage behaviour in an inflamed microenvironment, reducing oxidative stress and pro-inflammatory cytokines, while simultaneously increasing levels of anti-inflammatory cytokines. In a scratch test, HA films allowed for faster fibroblast migration within the first 16â¯h compared to MA. Overall, this study demonstrates that developing ß-glucan based films from barley, through a sustainable and cost-effective process, holds great promise for skin applications. These films exhibit significant potential to promote wound healing and modulate inflammation.
ABSTRACT
In recent decades, ionic liquids (ILs) have garnered research interest for their noteworthy properties, such as thermal stability, low or no flammability, and negligible vapour pressure. Moreover, their tunability offers limitless opportunities to design ILs with properties suitable for applications in many industrial fields. This study aims to synthetise two series of methylimidazolium ILs bearing long alkyl chain in their cations (C9, C10, C12, C14, C16, C18, C20) and with tetrafluoroborate (BF4) and the 1,3-dimethyl-5-sulfoisophthalate (DMSIP) as counter ions. The ILs were characterised using 1H-NMR and MALDI-TOF, and their thermal behaviour was investigated through DSC and TGA. Additionally, the antimicrobial, anticancer, and cytotoxic activities of the ILs were analysed. Moreover, the most promising ILs were incorporated at different concentrations (0.5, 1, 5 wt%) into polyvinyl chloride (PVC) by solvent casting to obtain antimicrobial blend films. The thermal properties and stability of the resulting PVC/IL films, along with their hydrophobicity/hydrophilicity, IL surface distribution, and release, were studied using DSC and TGA, contact angle (CA), SEM, and UV-vis spectrometry, respectively. Furthermore, the antimicrobial and cytotoxic properties of blends were analysed. The in vitro results demonstrated that the antimicrobial and antitumor activities of pure ILs against t Listeria monocytogenes, Escherichia coli, Pseudomonas fluorescens strains, and the breast cancer cell line (MCF7), respectively, were mainly dependent on their structure. These activities were higher in the series containing the BF4 anion and increased with the increase in the methylimidazolium cation alkyl chain length. However, the elongation of the alkyl chain beyond C16 induced a decrease in antimicrobial activity, indicating a cut-off effect. A similar trend was also observed in terms of in vitro biocompatibility. The loading of both the series of ILs into the PVC matrix did not affect the thermal stability of PVC blend films. However, their Tonset decreased with increased IL concentration and alkyl chain length. Similarly, both the series of PVC/IL films became more hydrophilic with increasing IL concentration and alkyl chain. The loading of ILs at 5% concentration led to considerable IL accumulation on the blend film surfaces (as observed in SEM images) and, subsequently, their higher release. The biocompatibility assessment with healthy human dermal fibroblast (HDF) cells and the investigation of antitumoral properties unveiled promising pharmacological characteristics. These findings provide strong support for the potential utilisation of ILs in biomedical applications, especially in the context of cancer therapy and as antibacterial agents to address the challenge of antibiotic resistance. Furthermore, the unique properties of the PVC/IL films make them versatile materials for advancing healthcare technologies, from drug delivery to tissue engineering and antimicrobial coatings to diagnostic devices.
ABSTRACT
Injectable bone substitutes (IBSs) represent a compelling choice for bone tissue regeneration, as they can be exploited to optimally fill complex bone defects in a minimally invasive manner. In this context, in situ gelling methylcellulose (MC) hydrogels may be engineered to be free-flowing injectable solutions at room temperature and gels upon exposure to body temperature. Moreover, incorporating a suitable inorganic phase can further enhance the mechanical properties of MC hydrogels and promote mineralization, thus assisting early cell adhesion to the hydrogel and effectively guiding bone tissue regeneration. In this work, thermo-responsive IBSs were designed selecting MC as the organic matrix and calcium phosphate (CaP) or CaP modified with graphene oxide (CaPGO) as the inorganic component. The resulting biocomposites displayed a transition temperature around body temperature, preserved injectability even after loading with the inorganic components, and exhibited adequate retention on an ex vivo calf femoral bone defect model. The addition of CaP and CaPGO promoted the in vitro mineralization process already 14 days after immersion in simulated body fluid. Interestingly, combined X-ray diffraction and solid state nuclear magnetic resonance characterizations revealed that the formed biomimetic phase was constituted by crystalline hydroxyapatite and amorphous calcium phosphate. In vitro biological characterization revealed the beneficial impact of CaP and CaPGO, indicating their potential in promoting cell adhesion, proliferation and osteogenic differentiation. Remarkably, the addition of GO, which is very attractive for its bioactive properties, did not negatively affect the injectability of the hydrogel nor the mineralization process, but had a positive impact on cell growth and osteogenic differentiation on both pre-differentiated and undifferentiated cells. Overall, the proposed formulations represent potential candidates for use as IBSs for application in bone regeneration both under physiological and pathological conditions.
Subject(s)
Bone Regeneration , Hydrogels , Methylcellulose , Hydrogels/chemistry , Hydrogels/pharmacology , Bone Regeneration/drug effects , Methylcellulose/chemistry , Animals , Injections , Calcium Phosphates/chemistry , Calcium Phosphates/pharmacology , Graphite/chemistry , Cattle , Cell Proliferation/drug effects , Osteogenesis/drug effects , HumansABSTRACT
Gellan gum (GG) was chemically modified with methacrylic moieties to produce a photocrosslinkable biomaterial ink, hereinafter called methacrylated GG (GGMA), with improved physico-chemical properties, mechanical behavior and stability under physiological conditions. Afterwards, GGMA was functionalized by incorporating two different bioactive compounds, a naturally derived eumelanin extracted from the black soldier fly (BSF-Eumel), or hydroxyapatite nanoparticles (HAp), synthesized by the sol-gel method. Different ink formulations based on GGMA (2 and 4% (w/v)), BSF-Eumel, at a selected concentration (0.3125 mg/mL), or HAp (10 and 30% wHAp/wGGMA) were developed and processed by three-dimensional (3D) printing. All the functionalized GGMA-based ink formulations allowed obtaining 3D-printed GGMA-based scaffolds with a well-organized structure. For both bioactive signals, the scaffolds with the highest GGMA concentration (4% (w/v)) and the highest percentage of infill (45%) showed the best performances in terms of morphological and mechanical properties. Indeed, these scaffolds showed a good structural integrity over 28 days. Given the presence of negatively charged groups along the eumelanin backbone, scaffolds consisting of GGMA/BSF-Eumel demonstrated a higher stability. From a mechanical point of view, GGMA/BSF-Eumel scaffolds exhibited values of storage modulus similar to those of GGMA ones, while the inclusion of HAp at 30% (wHAp/wGGMA) led to a storage modulus of 32.5 kPa, 3.5-fold greater than neat GGMA. In vitro studies proved the capability of the bioactivated 3D-printed scaffolds to support 7F2 osteoblast cell growth and differentiation. BSF-Eumel and HAp triggered a different time-dependent physiological response in the osteoblasts. Specifically, while the ink with BSF-Eumel acted as a stimulus towards cell proliferation, reaching the highest value at 14 days, a higher expression of alkaline phosphatase activity was detected for scaffolds consisting of GGMA and HAp. The overall findings demonstrated the possible use of these biomaterial inks for 3D-printed bone tissue-engineered scaffolds.
ABSTRACT
Graphene oxide (GO) and its reduced form (rGO) have recently attracted a fascinating interest due to their physico-chemical properties, which have opened up new and interesting opportunities in a wide range of biomedical applications, such as wound healing. It is worth noting that GO and rGO may offer a convenient access to its ready dispersion within various polymeric matrices (such as cellulose and its derivative forms), owing to their large surface area, based on a carbon skeleton with many functional groups (i.e., hydroxyl, carboxyl, epoxy bridge, and carbonyl moieties). This results in new synergic properties due to the presence of both components (GO or rGO and polymers), acting at different length-scales. Furthermore, they have shown efficient antimicrobial and angiogenic properties, mostly related to the intracellular formation of reactive oxygen species (ROS), which are advantageous in wound care management. For this reason, GO or rGO integration in cellulose-based matrixes have allowed for designing highly advanced multifunctional hybrid nanocomposites with tailored properties. The current review aims to discuss a potential relationship between structural and physico-chemical properties (i.e., size, edge density, surface chemistry, hydrophilicity) of the nanocomposites with antimicrobials and angiogenic mechanisms that synergically influence the wound healing phenomenon, by paying particular attention to recent findings of GO or rGO/cellulose nanocomposites. Accordingly, after providing a general overview of cellulose and its derivatives, the production methods used for GO and rGO synthesis, the mechanisms that guide antimicrobial and angiogenic processes of tissue repair, as well as the most recent and remarkable outcomes on GO/cellulose scaffolds in wound healing applications, will be presented.
ABSTRACT
Spinal cord injury (SCI) is characterized by neuroinflammatory processes that are marked by an uncontrolled activation of microglia, which directly damages neurons. Natural and synthetic melanins represent an effective tool to treat neuroinflammation because they possess immunomodulatory properties. Here, the main objective was to evaluate the effect of eumelanin-coated poly(lactic acid) (EU@PLA) aligned microfibers on in vitro model of neuroinflammation related to spinal cord injury in terms of inflammatory mediators' modulation. Aligned fibers were chosen to provide physical cues to guide axonal growth in a specific direction thus restoring the synaptic connection. Eumelanin decorated PLA electrospun substrates were produced combining electrospinning, spin coating and solid-state polymerization processes (oxidative coupling under oxygen atmosphere). Biological response in terms of antioxidant and anti-inflammatory activity was analyzed on an in vitro model of neuroinflammation [microglial cells stimulated with lipopolysaccharide (LPS)]. Cell morphology and EU@PLA mechanism of action, in terms of toll-like receptor-4 (TLR-4) involvement were assessed. The results show that EU@PLA fibers were able to decrease reactive oxygen species, nuclear factor kappa-light-chain-enhancer of activated B cells (NF-кB) expression >50 % compared to PLA + LPS and interleukin 6 (IL-6) secretion about 20 %. Finally, the mechanism of action of EU@PLA in microglia was found to be dependent on the TLR-4 signaling. Protein expression analysis revealed a decreased in TLR-4 production induced by LPS stimulation in presence of EU@PLA. Overall, our results show that EU@PLA represents an innovative and effective strategy for the control of inflammatory response in central nervous system.
Subject(s)
Melanins , Spinal Cord Injuries , Rats , Animals , Toll-Like Receptor 4 , Rats, Sprague-Dawley , Neuroinflammatory Diseases , Lipopolysaccharides/pharmacology , Spinal Cord Injuries/therapy , Spinal Cord Injuries/metabolism , PolyestersABSTRACT
An optimized extraction protocol for eumelanins from black soldier flies (BSF-Eumel) allows an in-depth study of natural eumelanin pigments, which are a valuable tool for the design and fabrication of sustainable scaffolds. Here, water-soluble BSF-Eumel sub-micrometer colloidal particles were used as bioactive signals for developing a composite biomaterial ink for scaffold preparation. For this purpose, BSF-Eumel was characterized both chemically and morphologically; moreover, biological studies were carried out to investigate the dose-dependent cell viability and its influence on human mesenchymal stem cells (hMSCs), with the aim of validating suitable protocols and to find an optimal working concentration for eumelanin-based scaffold preparation. As proof of concept, 3D printed scaffolds based on methacrylated hyaluronic acid (MEHA) and BSF-Eumel were successfully produced. The scaffolds with and without BSF-Eumel were characterized in terms of their physico-chemical, mechanical and biological behaviours. The results showed that MEHA/BSF-Eumel scaffolds had similar storage modulus values to MEHA scaffolds. In terms of swelling ratio and stability, these scaffolds were able to retain their structure without significant changes over 21 days. Biological investigations demonstrated the ability of the bioactivated scaffolds to support the adhesion, proliferation and osteogenic differentiation of human mesenchymal stem cells.
ABSTRACT
Considerable attention has been given to the use of chitosan (CS)-based materials reinforced with inorganic bioactive signals such as hydroxyapatite (HA) to treat bone defects and tissue loss. It is well known that CS/HA based materials possess minimal foreign body reactions, good biocompatibility, controlled biodegradability and antibacterial property. Herein, the bioactivity of these composite systems was analyzed on in vitro bone cell models for their applications in the field of bone tissue engineering (BTE). The combination of sol-gel approach and freeze-drying technology was used to obtain CS/HA scaffolds with three-dimensional (3D) porous structure suitable for cell in-growth. Specifically, our aim was to investigate the influence of bioactive composite scaffolds on cellular behavior in terms of osteoinductivity and anti-inflammatory effects for treating bone defects. The results obtained have demonstrated that by increasing inorganic component concentration, CS/HA (60 and 70% v/v) scaffolds induced a good biological response in terms of osteogenic differentiation of human mesenchymal stem cells (hMSC) towards osteoblast phenotype. Furthermore, the scaffolds with higher concentration of inorganic fillers are able to modulate the production of pro-inflammatory (TGF-ß) and anti-inflammatory (IL-4, IL-10) cytokines. Our results highlight the possibility of achieving smart CS/HA based composites able to promote a great osteogenic differentiation of hMSC by increasing the amount of HA nanoparticles used as bioactive inorganic signal. Contemporarily, these materials allow avoiding the induction of a pro-inflammatory response in bone implant site.
Subject(s)
Chitosan , Nanocomposites , Biocompatible Materials/chemistry , Bone Regeneration , Chitosan/chemistry , Durapatite/chemistry , Durapatite/pharmacology , Nanocomposites/chemistry , Osteogenesis , Tissue Engineering/methods , Tissue Scaffolds/chemistryABSTRACT
Nowadays, prostate cancer is the most widespread tumour in worldwide male population. Actually, brachytherapy is the most advanced radiotherapy strategy for the local treatment of prostate cancer. It consists in the placing of radioactive sources closed to the tumour side thus killing cancer cells. However, brachytherapy causes the same adverse effects of external-beam radiotherapy. Therefore, alternative treatment approaches are required for enhancing radiotherapy effectiveness and reducing toxic symptoms. Nanostructured exfoliated black phosphorus (2D BP) may represent a strategic tool for local cancer therapy because of its capability to induce singlet oxygen production and act as photosensitizer. Hence, we investigated 2D BP in vitro effect on healthy and cancer prostate cell behavior. 2D BP was obtained through liquid exfoliation. 2D BP effect on healthy and cancer prostate cell behaviors was analyzed by investigating cell viability, oxidative stress and inflammatory marker expression. 2D BP inhibited prostate cancer cell survival, meanwhile promoted healthy prostate cell survival in vitro by modulating oxidative stress and immune response with and without near-infrared light (NIR)-irradiation. Nanostructured 2D BP is able to inhibit in vitro prostate cancer cells survival and preserve healthy prostate cell vitality through the control of oxidative stress and immune response, respectively.
Subject(s)
Phosphorus/pharmacology , Prostate/pathology , Prostatic Neoplasms/pathology , Cell Count , Cell Line, Tumor , Cell Proliferation/drug effects , Cell Shape/drug effects , Humans , Inflammation/pathology , Male , Neoplasm Proteins/metabolism , Nitrites/metabolism , Oxidative Stress/drug effects , Prostate/drug effects , Prostatic Neoplasms/immunology , Reactive Oxygen Species/metabolism , Spectrum Analysis, Raman , Tumor Suppressor Protein p53/metabolismABSTRACT
In the current work, our purpose was based on the assessment of bioactive chitosan (CS)/Poly(ethylene glycol) diacrylate (PEGDA) based scaffolds ability to stimulate in vitro angiogenesis process. The bioactivation of the scaffolds was accomplished by using organic (BMP-2 peptide) and inorganic (hydroxyapatite nanoparticles) cues. In particular, the properties of the materials in terms of biological response promotion on human umbilical vein endothelial cells (HUVECs) were studied by using in vitro angiogenesis tests based on cell growth and proliferation. Furthermore, our interest was to examine the scaffolds capability to modulate two important steps involved in angiogenesis process: migration and tube formation of cells. Our data underlined that bioactive signals on CS/PEGDA scaffolds surface induce a desirable effect on angiogenic response concerning angiogenic marker expression (CD-31) and endothelial tissue formation (tube formation). Taken together, the results emphasized the concept that bioactive CS/PEGDA scaffolds may be novel implants for stimulating neovascularization of tissue-engineered constructs in regenerative medicine field.
Subject(s)
Chitosan , Durapatite , Human Umbilical Vein Endothelial Cells , Humans , Neovascularization, Physiologic , Osteogenesis , Polyethylene Glycols , Tissue Engineering , Tissue ScaffoldsABSTRACT
Bone fractures related to musculoskeletal disorders determine long-term disability in older people with a consequent significant economic burden. The recovery of pathologically impaired tissue architecture allows avoiding bone loss-derived consequences such as bone height reduction, deterioration of bone structure, inflamed bone pain, and high mortality for thighbone fractures. Actually, standard therapy for osteoporosis treatment is based on the systemic administration of biphosphonates and anti-inflammatory drugs, which entail several side effects including gastrointestinal (GI) diseases, fever, and articular pain. Hence, the demand of innovative therapeutic approaches for locally treating bone lesions has been increasing in the last few years. In this scenario, the development of injectable materials loaded with therapeutically active agents (i.e., anti-inflammatory drugs, antibiotics, and peptides mimicking growth factors) could be an effective tool to treat bone loss and inflammation related to musculoskeletal diseases, including osteoporosis and osteoarthritis. According to this challenge, here, we propose three different compositions of injectable calcium phosphates (CaP) as new carrier materials of therapeutic compounds such as bisphosphonates (i.e., alendronate), anti-inflammatory drugs (i.e., diclofenac sodium), and natural molecules (i.e., harpagoside) for the local bone disease treatment. Biological quantitative analyses were performed for screening osteoinductive and anti-inflammatory properties of injectable drug-loaded systems. Meanwhile, cell morphological features were analyzed through scanning electron microscopy and confocal investigations. The results exhibited that the three systems exerted an osteoinductive effect during later phases of osteogenesis. Simultaneously, all compositions showed an anti-inflammatory activity on inflammation in vitro models.
ABSTRACT
Ti6Al4V alloy is still attracting great interest because of its application as an implant material for hard tissue repair. This research aims to produce and investigate in-situ chitosan/hydroxyapatite (CS/HA) nanocomposite coatings based on different amounts of HA (10, 50 and 60 wt.%) on alkali-treated Ti6Al4V substrate through the sol-gel process to enhance in vitro bioactivity. The influence of different contents of HA on the morphology, contact angle, roughness, adhesion strength, and in vitro bioactivity of the CS/HA coatings was studied. Results confirmed that, with increasing the HA content, the surface morphology of crack-free CS/HA coatings changed for nucleation modification and HA nanocrystals growth, and consequently, the surface roughness of the coatings increased. Furthermore, the bioactivity of the CS/HA nanocomposite coatings enhanced bone-like apatite layer formation on the material surface with increasing HA content. Moreover, CS/HA nanocomposite coatings were biocompatible and, in particular, CS/10 wt.% HA composition significantly promoted human mesenchymal stem cells (hMSCs) proliferation. In particular, these results demonstrate that the treatment strategy used during the bioprocess was able to improve in vitro properties enough to meet the clinical performance. Indeed, it is predicted that the dense and crack-free CS/HA nanocomposite coatings suggest good potential application as dental implants.
ABSTRACT
Current bone implants based on new biomaterials may cause a foreign body reaction (FBR) around the implant itself thus prolonging the healing time following bone fractures. In this paper, biomimetic chitosan-based scaffolds promoting bone tissue regeneration and controlling inflammatory response are proposed. First, the anti-inflammatory potential of scaffolds on hMSCs stimulated by lipopolysaccharide (LPS) was investigated by dosing the levels of some interleukins and oxidative stress metabolites (IL-1ß, IL-10 and nitrites) involved in immune response. Then, to mimic the inflammation process at osteoporotic site, the effect of scaffolds was evaluated on in vitro co-culture model based on osteoblasts and macrophages stimulated by LPS. Results demonstrated that bioactivated scaffolds are able to i) inhibit synthesis of inflammatory mediators such as IL-1ß; ii) reduce oxidative stress metabolites; and iii) promote anti-inflammatory markers generation (IL-10) in hMSCs. Finally, bioactivated scaffolds show an anti-inflammatory activity also on in vitro co-cultures, which better mimic in vivo damaged bone microenvironment.
Subject(s)
Anti-Inflammatory Agents/chemistry , Biomimetic Materials/chemistry , Bone Regeneration , Chitosan/chemistry , Mesenchymal Stem Cells/metabolism , Tissue Scaffolds/chemistry , Cell Line , Humans , Interleukin-10/metabolism , Interleukin-1beta/metabolism , Mesenchymal Stem Cells/pathologyABSTRACT
Nowadays chemotherapy is the main treatment for osteosarcoma disease, even if limited by the lack of selectivity between healthy and cancer cells during the inhibition of cell division. Herein, we propose the use of few-layer two-dimensional black phosphorous (2D bP) as an alternative tool for osteosarcoma treatment and report how 2D bP can stimulate newly forming bone tissue generation after osteosarcoma resection. In our study, we have developed an in vitro model to evaluate the efficacy of 2D bP material with and without near-infrared light irradiation treatment, and we have demonstrated that the presence of 2D bP without treatment inhibits the metabolic activity of osteosarcoma cells (SAOS-2) while inducing both the proliferation and the osteogenic differentiation of human preosteoblast cells (HOb) and mesenchymal stem cells. Furthermore, we also propose an in vitro coculture model (SAOS-2 and HOb cell lines) in order to study the effect of 2D bP on inflammatory response related to cancer. On this coculture model, 2D bP may increase anti-inflammatory cytokine generation (i.e., interleukin-10) and inhibit proinflammatory mediators synthesis (i.e., interleukin-6), thus suggesting the opportunity to prevent cancer-related inflammation. Finally, we have demonstrated that 2D bP represents a promising candidate for future regenerative medicine and anticancer applications.
Subject(s)
Biocompatible Materials/pharmacology , Bone Regeneration/drug effects , Phosphorus/chemistry , Biocompatible Materials/chemistry , Biocompatible Materials/therapeutic use , Cell Differentiation/drug effects , Cell Line , Cell Proliferation/drug effects , Cell Proliferation/radiation effects , Coculture Techniques , Disease Progression , Humans , Inflammation/prevention & control , Infrared Rays , Interleukin-10/metabolism , Interleukin-6/metabolism , Lipopolysaccharides/pharmacology , Osteoblasts/cytology , Osteoblasts/metabolism , Osteogenesis/drug effects , Osteosarcoma/metabolism , Osteosarcoma/pathology , Phosphorus/pharmacology , Phosphorus/therapeutic use , Reactive Oxygen Species/metabolismABSTRACT
Biofilm formation is one of the main obstacles that occur during in vivo implantation, which compromises the implant functionality and patients' health. This is the inspiration for the development of novel implant materials that contain broad-spectrum antimicrobial activity, including antibacterial and antifungal, and enable the local release of antimicrobial agents. Here, multifunctional calcium phosphate-ionic liquid (IL) materials, possessing antimicrobial and repair/regeneration features plus injectability, are proposed as implants in minimally invasive surgery. This approach was based on the loading of 1-alkyl-3-alkylimidazolium chloride ionic liquids (ILs) (C nMImCl ( n = 4, 10, 16) and (C10)2MImCl) during the in situ sol-gel synthesis of calcium phosphates (CaP) and study of their effects on CaP crystallization and biological properties. Physical, morphological, and biological investigations were performed to evaluate the bionanocomposites' properties. The IL N-alkyl chain length influenced the crystallization of CaP and, consequently, the biological properties, which afforded bionanocomposites (when loaded with C16MImCl or (C10)2MImCl) that, (i) inhibit both in vitro bacterial and fungal growth; (ii) reduce the in vitro inflammatory response; (iii) induce osteogenic differentiation in the basal medium of human mesenchymal stem cells; and (iv) are injectable. This will enable the design of multifunctional injectable implants with antimicrobial, anti-inflammatory, and regenerative properties to be used in minimally invasive surgery of bone and maxillofacial defects.
ABSTRACT
Nowadays, the need of novel strategies to repair and regenerate bone defects in the field of biomedical applications has increased. Novel approaches include the design of natural bioactive scaffolds mimicking bone tissue. These bioactive scaffolds have to possess biophysical properties suitable to address biological response towards newly bone tissue formation. In particular, scaffold porosity and pore size play a pivotal role in cell migration, adhesion and proliferation, thus increasing cell-material surface interaction and osteogenic signals transmission. Here we propose the development of macroporous alginate foams (MAFs) with porous and well interconnected structure, useful to enhance growth and osteogenic differentiation of human Mesenchymal Stem Cells (hMSCs). Moreover, in this study we report a new method for MAFs fabrication based on the combination of internal gelation technique with gas foaming. Strontium was employed in combination with calcium as cross-linking agent for the alginate chains and as enhancer of the osteogenic differentiation. The influence of strontium ions on the gelation kinetics, physical properties and degradation in physiological medium of MAFs was investigated. Our results suggest that the combination of internal gelation technique with gas foaming followed by freeze-drying is an easy and straightforward procedure to prepare alginate foams with high porosity and interconnectivity, able to support cell infiltration. Finally, biological assays showed how scaffolds with high strontium content are able to support cell growth and differentiation in long times by promoting osteogenic marker expression.
Subject(s)
Alginates/pharmacology , Bone and Bones/drug effects , Cross-Linking Reagents/pharmacology , Strontium/pharmacology , Tissue Engineering , Alginates/chemistry , Cell Differentiation/drug effects , Cell Proliferation/drug effects , Cross-Linking Reagents/chemistry , Humans , Mesenchymal Stem Cells/drug effects , Osteogenesis/drug effects , Particle Size , Porosity , Strontium/chemistry , Surface PropertiesABSTRACT
Hyaluronic acid (HA)-based hydrogels are one of the most promising naturally derived biomaterials for tissue engineering applications, as they can play an important role in many key cellular processes. In this study, HA was chemically functionalized with photo-cross-linkable motifs by reacting with methacrylic anhydride (MA) to obtain methacrylated hyaluronic acid (MeHA). A range of MA/HA molar ratios was used to obtain different degrees of substitution (DS) ranging from 3.5% to 74.5%, as showed by nuclear magnetic resonance and attenuated total reflection spectroscopy. By fine tuning the DS, the chemical reaction parameters, and the polymer concentration, it was demonstrated the possibility to tailor their mechanical features. Double network (DN) hydrogels were prepared through the synergic use of MeHA and polyethylene glycole diacrylate (PEGDA). To improve the biological properties of DN hydrogels, bioactive solid signals such as hydroxyapatite nanoparticles (HAp) prepared by sol-gel approach were used in combination with DN hydrogels to obtain an advanced composite material with dual function in terms of mechanical and biological support for soft/hard tissue formation. The results highlighted that composite-DN hydrogels showed a 10-time increase of the storage modulus, if compared to neat MeHA, and an early alkaline phosphatase expression from human mesenchymal stem cells in basal medium. This work can be considered a first systematic approach for the designing of photo-cross-linkable hydrogels, based on a combination of natural/synthetic polymers and HAp, that could be applied in three-dimensional additive manufacturing techniques such as stereolithography. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 3079-3089, 2018.
Subject(s)
Biocompatible Materials/chemistry , Durapatite/chemistry , Hyaluronic Acid/analogs & derivatives , Hydrogels/chemistry , Mesenchymal Stem Cells/cytology , Polyethylene Glycols/chemistry , Cell Differentiation , Cell Line , Cells, Cultured , Humans , Methacrylates/chemistry , Nanoparticles/chemistry , Osteogenesis , Phase Transition , Tissue Scaffolds/chemistryABSTRACT
The present work is focused on the design of a bioactive chitosan-based scaffold functionalized with organic and inorganic signals to provide the biochemical cues for promoting stem cell osteogenic commitment. The first approach is based on the use of a sequence of 20 amino acids corresponding to a 68-87 sequence in knuckle epitope of BMP-2 that was coupled covalently to the carboxyl group of chitosan scaffold. Meanwhile, the second approach is based on the biomimetic treatment, which allows the formation of hydroxyapatite nuclei on the scaffold surface. Both scaffolds bioactivated with organic and inorganic signals induce higher expression of an early marker of osteogenic differentiation (ALP) than the neat scaffolds after 3 days of cell culture. However, scaffolds decorated with BMP-mimicking peptide show higher values of ALP than the biomineralized one. Nevertheless, the biomineralized scaffolds showed better cellular behaviour than neat scaffolds, demonstrating the good effect of hydroxyapatite deposits on hMSC osteogenic differentiation. At long incubation time no significant difference among the biomineralized and BMP-activated scaffolds was observed. Furthermore, the highest level of Osteocalcin expression (OCN) was observed for scaffold with BMP2 mimic-peptide at day 21. The overall results showed that the presence of bioactive signals on the scaffold surface allows an osteoinductive effect on hMSC in a basal medium, making the modified chitosan scaffolds a promising candidate for bone tissue regeneration.
Subject(s)
Bone and Bones/cytology , Chitosan/chemistry , Coated Materials, Biocompatible , Inorganic Chemicals/chemistry , Organic Chemicals/chemistry , Tissue Engineering , Tissue Scaffolds/chemistry , Animals , Bone Regeneration/drug effects , Bone and Bones/physiology , Calcification, Physiologic/drug effects , Cell Differentiation/drug effects , Cells, Cultured , Coated Materials, Biocompatible/chemistry , Coated Materials, Biocompatible/pharmacology , Humans , Mesenchymal Stem Cells/cytology , Mesenchymal Stem Cells/drug effects , Mesenchymal Stem Cells/physiology , Osteogenesis/drug effects , Tissue Engineering/instrumentation , Tissue Engineering/methodsABSTRACT
This study reports on the development of a scaffold with a gradient of bioactive solid signal embedded in the biodegradable polymer matrix by combining a sol-gel approach and freeze-drying technology. The chemical approach based on the sol-gel transition of calcium phosphates ensures the particles dispersion into the gelatin matrix and a direct control of interaction among COOHgelatin /Ca2+ ions. Morphological analysis demonstrated that on the basis of the amount of inorganic component and by using specific process conditions, it is possible to control the spatial distribution of nanoparticles around the gelatin helix. In fact, methodology and formulations were able to discriminate between the different hydroxyapatite concentrations and their respective morphology. The good biological response represented by good cell attachment, proliferation and increased levels of alkaline phosphatase as an indicator of osteoblastic differentiation of human mesenchymal stem cells toward the osteogenic lineage, demonstrating the effect of bioactive solid signals on cellular behavior. Furthermore, the inhibition of reactive oxygen species production by composite materials predicted potential anti-inflammatory properties of scaffolds thus confirming their biocompatibility. Indeed, these interesting biological results suggest good potential application of this scaffold as filler to repair bone defects. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2007-2019, 2018.