ABSTRACT
Many neuroprosthetic applications require the use of very small, flexible multi-channel microelectrodes (e.g. polyimide-based film-like electrodes) to fit anatomical constraints. By arranging the electrode contacts on both sides of the polyimide film, selectivity can be further increased without increasing size. In this work, two approaches to create such double-sided electrodes are described and compared: sandwich electrodes prepared by precisely gluing two single-sided structures together, and monolithic electrodes created using a new double-sided photolithography process. Both methods were successfully applied to manufacture double-sided electrodes for stimulation of the vestibular system. In a case study, the electrodes were implanted in the semicircular canals of three guinea pigs and proven to provide electrical stimulation of the vestibular nerve. For both the monolithic electrodes and the sandwich electrodes, long-term stability and functionality was observed over a period of more than 12 months. Comparing the two types of electrodes with respect to the manufacturing process, it can be concluded that monolithic electrodes are the preferred solution for very thin electrodes (<20 µm), while sandwich electrode technology is especially suitable for thicker electrodes (40-50 µm).
Subject(s)
Electrodes, Implanted , Membranes, Artificial , Prosthesis Design , Vestibular Nerve , Animals , Electric Stimulation/instrumentation , Electric Stimulation/methods , Guinea Pigs , Humans , Microelectrodes , Resins, Synthetic/chemistryABSTRACT
In most conventional in vitro toxicological assays, the response of a complete cell population is averaged, and therefore, single-cell responses are not detectable. Such averaging might result in misinterpretations when only individual cells within a population respond to a certain stimulus. Therefore, there is a need for non-invasive in vitro systems to verify the toxicity of nanoscale materials. In the present study, a micro-sized cell culture chamber with a silicon nitride membrane (0.16 mm2) was produced for cell cultivation and the detection of specific cell responses. The biocompatibility of the microcavity chip (MCC) was verified by studying adipogenic and neuronal differentiation. Thereafter, the suitability of the MCC to study the effects of nanoparticles on a small cell population was determined by using a green fluorescence protein-based reporter cell line. Interleukin-8 promoter (pIL8) induction, a marker of an inflammatory response, was used to monitor immune activation. The validation of the MCC-based method was performed using well-characterized gold and silver nanoparticles. The sensitivity of the new method was verified comparing the quantified pIL8 activation via MCC-based and standard techniques. The results proved the biocompatibility and the sensitivity of the microculture chamber, as well as a high optical quality due to the properties of Si3N4. The MCC-based method is suited for threshold- and time-dependent analysis of nanoparticle-induced IL8 promoter activity. This novel system can give dynamic information at the level of adherent single cells of a small cell population and presents a new non-invasive in vitro test method to assess the toxicity of nanomaterials and other compounds.PACS: 85.35.Be, 81.16.Nd, 87.18.Mp.
ABSTRACT
There is a lack of methods suitable for generation of data about the dynamics of effects on cell membranes with a high sensitivity. Such methods are urgently needed to support the optimisation of interaction of substances, particles or materials with cell. The goal of this article is to use an improved microhole chip system to monitor the alterations of cells due to the interactions of polymer-DNA complexes. This should demonstrate exemplarily that subtoxic effect of biological relevant particles or substances at relevant concentrations can be monitored for several hours. By using a microhole cell chip and a microfluidic unit single cells can be electrically interfaced via microholes and the use of small electrodes with high impedances is not necessary. For separation and positioning of the cells onto the hole negative pressure is applied on the reverse side of the chip. Under cell culture conditions the cell starts to spread on the biocompatible insulating chip membrane resulting in a stable interface to an adherent growing cell. After the spreading process is finished, the polymer/polyplex solution is added and the impedance is measured with respect to time. To illustrate the cellular parameter which can affect the measured impedance a simple simulation based on the finite element method (FEM) is performed. It was shown for the first time that the impedance-based method predicated on the microhole chip can be used for biological relevant substances at relevant concentrations and that it is more sensitive than the well-established biological marker.