ABSTRACT
Demand for gender-affirming facial surgery is growing rapidly. Frontal sinus setback, one of the key procedures used in gender-affirming facial surgery, has a particularly high impact on gender perception. Mixed reality (MR) allows a user to view and virtually overlay three-dimensional imaging on the patient and interact with it in real time. We used the Medivis's SurgicalAR system in conjunction with the Microsoft HoloLens Lucille2 (Microsoft). Computed tomography imaging was uploaded to SurgicalAR, and a three-dimensional (3D) hologram was projected onto the display of the HoloLens. The hologram was registered and matched to the patient, allowing the surgeon to view bony anatomy and underlying structures in real time on the patient. The surgeon was able to outline the patient's frontal sinuses using the hologram as guidance. A 3D printed cutting guide was used for comparison. Negligible difference between the mixed reality-based outline and 3D-printed outline was seen. The process of loading the hologram and marking the frontal sinus outline lasted less than 10 minutes. The workflow and usage described here demonstrate significant promise for the use of mixed reality as imaging and surgical guidance technology in gender-affirming facial surgery.
ABSTRACT
BACKGROUND: Management of patients with recurrent anterior glenohumeral instability in the setting of subcritical glenoid bone loss (GBL), defined in this study as 20% GBL or less, remains controversial. This study aimed to compare arthroscopic Bankart with remplissage (ABR+R) to open Latarjet for subcritical GBL in primary or revision procedures. We hypothesized that ABR+R would yield higher rates of recurrent instability and reoperation compared to Latarjet in both primary and revision settings. METHODS: A retrospective study was conducted on patients undergoing either arthroscopic ABR+R or an open Latarjet procedure. Patients with connective tissue disorders, critical GBL (>20%), < 2 year follow-up, or insufficient data were excluded. Recurrent instability and revision were the primary outcomes of interest. Additional outcomes of interest included subjective shoulder value (SSV), strength and range of motion (ROM) RESULTS: 108 patients (70 ABR+R, 38 Latarjet) were included with an average follow-up of 4.3 ±2.1 years. In the primary and revision settings, similar rates of recurrent instability (Primary: p=0.60; Revision: p=0.28) and reoperation (Primary: p=0.06; Revision: p=1.00) were observed between Latarjet and ABR+R. Primary ABR+R exhibited better SSV, active ROM, and internal rotation strength compared to primary open Latarjet. However, no differences were observed in the revision setting. CONCLUSION: Similar rates of recurrent instability and reoperation in addition to comparable outcomes with no differences in ROM were found for ABR+R and Latarjet in patients with subcritical GBL in both the primary and revision settings. ABR+R can be a safe and effective procedure in appropriately selected patients with less than 20% GBL for both primary and revision stabilization.
ABSTRACT
Background: Augmented reality (AR) applications in neurosurgery have expanded over the past decade with the introduction of headset-based platforms. Many studies have focused on either preoperative planning to tailor the approach to the patient's anatomy and pathology or intraoperative surgical navigation, primarily realized as AR navigation through microscope oculars. Additional efforts have been made to validate AR in trainee and patient education and to investigate novel surgical approaches. Our objective was to provide a systematic overview of AR in neurosurgery, provide current limitations of this technology, as well as highlight several applications of AR in neurosurgery. Methods: We performed a literature search in PubMed/Medline to identify papers that addressed the use of AR in neurosurgery. The authors screened three hundred and seventy-five papers, and 57 papers were selected, analyzed, and included in this systematic review. Results: AR has made significant inroads in neurosurgery, particularly in neuronavigation. In spinal neurosurgery, this primarily has been used for pedicle screw placement. AR-based neuronavigation also has significant applications in cranial neurosurgery, including neurovascular, neurosurgical oncology, and skull base neurosurgery. Other potential applications include operating room streamlining, trainee and patient education, and telecommunications. Conclusion: AR has already made a significant impact in neurosurgery in the above domains and has the potential to be a paradigm-altering technology. Future development in AR should focus on both validating these applications and extending the role of AR.
ABSTRACT
PURPOSE OF REVIEW: Augmented reality (AR) has gained popularity in various sectors, including gaming, entertainment, and healthcare. The desire for improved surgical navigation within orthopaedic surgery has led to the evaluation of the feasibility and usability of AR in the operating room (OR). However, the safe and effective use of AR technology in the OR necessitates a proper understanding of its capabilities and limitations. This review aims to describe the fundamental elements of AR, highlight limitations for use within the field of orthopaedic surgery, and discuss potential areas for development. RECENT FINDINGS: To date, studies have demonstrated evidence that AR technology can be used to enhance navigation and performance in orthopaedic procedures. General hardware and software limitations of the technology include the registration process, ergonomics, and battery life. Other limitations are related to the human response factors such as inattentional blindness, which may lead to the inability to see complications within the surgical field. Furthermore, the prolonged use of AR can cause eye strain and headache due to phenomena such as the vergence-convergence conflict. AR technology may prove to be a better alternative to current orthopaedic surgery navigation systems. However, the current limitations should be mitigated to further improve the feasibility and usability of AR in the OR setting. It is important for both non-clinicians and clinicians to work in conjunction to guide the development of future iterations of AR technology and its implementation into the OR workflow.
ABSTRACT
Background: The placement of an external ventricular drain (EVD) for the treatment of acute hydrocephalus is one of the most common life-saving procedures that neurosurgeons perform worldwide. There are many well-known complications associated with EVD placement, including tract hemorrhages, intra-parenchymal and subdural hemorrhages, infection, and catheter misplacement. Given the variety of complications associated with EVD placement and the inconsistent findings on the relationship of accuracy to complications, the present study reviewed short- and long-term complications related to EVD placement at our institution. Methods: A retrospective review was conducted for all consecutive patients who underwent bedside EVD placement for any indication between December 2020 and December 2021. Collected variables included demographic information, etiology of disease state, pre-and post-operative head computed tomography measurements, and post-procedural metrics (immediate and delayed complications). Results: A total of 124 patients qualified for inclusion in our study. EVDs that were non-functioning/exchanged were not significantly related to age, accuracy, ventriculomegaly, sex, disposition, laterality, type of EVD used, intraventricular hemorrhage (IVH), etiology, or Kakarla Grade (KG) (all P > 0.17). The need for a second EVD was similarly not related to age, accuracy, ventriculomegaly, sex, disposition, location, laterality, type of EVD used, IVH, etiology, or KG (all P > 0.130). Patients who died, however, were significantly more likely to have a second contralateral EVD placed (18.2% vs. 4.9% P = 0.029). We also found that left-sided EVDs were significantly more likely to fail within seven days of placement (29.4% vs 13.3%, P = 0.037; relative risk (RR) 1.93, 95% confidence interval: 1.09-3.43), unrelated to age, sex, etiology, type of EVD, IVH, location of the procedure, or accuracy (all P > 0.07). This remained significant when using a binary logistic regression to control for ventriculomegaly, accuracy, mortality, age, sex, and etiology (P = 0.021, B = 3.43). Conclusion: In our cohort, although a clear relationship between inaccuracy and complication rates was not found, our data did demonstrate that left-sided EVDs were more likely to fail within the immediate postoperative time point, and patients who died were more likely to have a second, contralateral EVD placed.
ABSTRACT
INTRODUCTION: Recent studies have defined pseudoparesis as limited active forward elevation between 45° and 90° and maintained passive range of motion (ROM) in the setting of a massive rotator cuff tear (RCT). Although pseudoparesis can be reliably reversed with reverse total shoulder arthroplasty (RSA) or superior capsular reconstruction (SCR), the optimal treatment for this indication remains unknown. The purpose of this study was to compare the clinical outcomes of RSA to SCR in patients with pseudoparesis secondary to massive, irreparable RCT (miRCT). METHODS: This was a retrospective cohort study of consecutive patients aged 40-70 years with pseudoparesis secondary to miRCT who were treated with either RSA or SCR by a single fellowship-trained shoulder surgeon from 2016 to 2021 with a minimum 12-month follow-up. Multivariate linear regression modeling was used to compare active ROM, visual analog pain scale (VAS), Subjective Shoulder Value (SSV), and American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form (ASES) score between RSA and SCR while controlling for confounding variables. RESULTS: Twenty-seven patients were included in the RSA cohort and 23 patients were included in the SCR cohort with similar mean follow-up times (26.2 ± 21.1 vs. 21.9 ± 14.7 months, respectively). The patients in the RSA group were significantly older than those in the SCR group (65.2 ± 4.4 vs. 54.2 ± 7.8 years, P < .001) and had more severe arthritis (1.8 ± 0.9 vs. 1.2 ± 0.5 Samilson-Prieto, P = .019). The pseudoparesis reversal rate among the RSA and SCR cohorts was 96.3% and 91.3%, respectively. On univariate analysis, the RSA cohort demonstrated significantly greater mean improvement in active FF (89° ± 26° vs. 73° ± 30° change, P = .048), greater postoperative SSV (91 ± 8% vs. 69 ± 25%, P < .001), lower postoperative VAS pain scores (0.6 ± 1.2 vs. 2.2 ± 2.9, P = .020), and less postoperative internal rotation (IR; 4.6° ± 1.6° vs. 6.9° ± 1.8°, P = .004) compared with SCR. On multivariate analysis controlling for age and osteoarthritis, RSA remained a significant predictor of greater SSV (ß = 21.5, P = .021) and lower VAS scores (ß = -1.4, P = .037), whereas SCR was predictive of greater IR ROM (ß = 3.0, P = .043). CONCLUSION: Although both RSA and SCR effectively reverse pseudoparesis, patients with RSA have higher SSV and lower pain scores but less IR after controlling for age and osteoarthritis. The results of this study may inform surgical decision making for patients who are suitable candidates for either procedure.
Subject(s)
Arthroplasty, Replacement, Shoulder , Range of Motion, Articular , Rotator Cuff Injuries , Humans , Middle Aged , Male , Female , Retrospective Studies , Rotator Cuff Injuries/surgery , Rotator Cuff Injuries/complications , Aged , Arthroplasty, Replacement, Shoulder/methods , Adult , Plastic Surgery Procedures/methods , Treatment Outcome , Joint Capsule/surgeryABSTRACT
As a lightweight metal with mechanical properties similar to natural bone, Mg and its alloys are great prospects for biodegradable, load bearing implants. However, rapid degradation and H2 gas production in physiological media has prevented widespread use of Mg alloys. Surface heterogeneities in the form of intermetallic particles dominate the corrosion response. This research shows that surface homogenization significantly improved the biological corrosion response observed during immersion in simulated body fluid (SBF). The laser processed Mg alloy exhibited a 50% reduction in mass loss and H2 evolution after 24 h of immersion in SBF when compared to the wrought, cast alloy. The laser processed samples exhibited increased wettability as evident from wetting angle studies, further suggesting improved biocompatibility. Electrochemical analysis by potentiodynamic polarization measurements showed that the anodic and cathodic kinetics were reduced following laser processing and are attributed to the surface chemical homogeneity.