ABSTRACT
The complexes of G-quadruplex forming DNA thrombin binding aptamers (TBA) and polyamidoamine dendrimers (PAMAM) were studied with the aim to form a model targeted drug delivery system. Hydrodynamic diameter, zeta potential and melting temperature (Tm ) were investigated by dynamic light scattering and UV-VIS spectrophotometry. Non-covalent adsorption by means of electrostatic interaction between positively charged amino groups of dendrimers (+) and negatively charged phosphate groups of aptamers (-) has driven the formation of aggregates. The size of complexes was in the range of 0.2-2â µm and depended on the type of dispersant, charge ratio (+/-) and temperature. Raising the temperature increased the polydispersity, new smaller size distributions were observed indicating the G-quadruplex unfolding. The melting transition temperature of TBA aptamer was affected by the presence of amino-terminated PAMAM rather than carboxylated succinic acid PAMAM-SAH dendrimer, thus supporting the electrostatic nature of interaction that disturbed denaturation of target-specific quadruplex aptamer structure.
Subject(s)
Aptamers, Nucleotide , Dendrimers , Dendrimers/chemistry , Dynamic Light Scattering , SpectrophotometryABSTRACT
One of the major limitations for the treatment of many diseases is an inability of drugs to cross the cell membrane barrier. Different kinds of carriers are being investigated to improve drug bioavailability. Among them, lipid or polymer-based systems are of special interest due to their biocompatibility. In our study, we combined dendritic and liposomal carriers and analysed the biochemical and biophysical properties of these formulations. Two preparation methods of Liposomal Locked-in Dendrimers (LLDs) systems have been established and compared. Carbosilane ruthenium metallodendrimer was complexed with an anti-cancer drug (doxorubicin) and locked in a liposomal structure, using both techniques. The LLDs systems formed by hydrophilic locking had more efficient transfection profiles and interacted with the erythrocyte membrane better than systems using the hydrophobic method. The results indicate these systems have improved transfection properties when compared to non-complexed components. The coating of dendrimers with lipids significantly reduced their hemotoxicity and cytotoxicity. The nanometric size, low polydispersity index and reduced positive zeta potential of such complexes made them attractive for future application in drug delivery. The formulations prepared by the hydrophobic locking protocol were not effective and will not be considered furthermore as prospective drug delivery systems. In contrast, the formulations formed by the hydrophilic loading method have shown promising results where the cytotoxicity of LLD systems with doxorubicin was more effective against cancer than normal cells.
Subject(s)
Antineoplastic Agents , Dendrimers , Neoplasms , Ruthenium , Humans , Dendrimers/chemistry , Drug Carriers/chemistry , Drug Delivery Systems , Antineoplastic Agents/chemistry , Doxorubicin/chemistry , Liposomes/chemistry , Neoplasms/drug therapy , LipidsABSTRACT
We analyzed the possibility of the detection of cytochrome c (cyt c) being physically adsorbed on lipid films or covalently bounded to 11-mercapto-1-undecanoic acid (MUA) chemisorbed on the gold layer using quartz crystal microbalance with dissipation monitoring (QCM-D). The negatively charged lipid film composed of a mixture of zwitterionic DMPC and negatively charged DMPG phospholipids at a molar ratio of 1:1 allowed the formation of a stable cyt c layer. Addition of DNA aptamers specific to cyt c, however, resulted in removal of cyt c from the surface. The interaction of cyt c with the lipid film and its removal by DNA aptamers were accompanied by changes in viscoelastic properties evaluated using the Kelvin-Voigt model. Cyt c covalently bound to MUA also provided a stable protein layer already at its relatively low concentrations (0.5 µM). A decrease in the resonant frequency following the addition of gold nanowires (AuNWs) modified by DNA aptamers was observed. The interaction of aptamers with cyt c on the surface can be a combination of specific and non-specific interactions due to electrostatic forces between negatively charged DNA aptamers and positively charged cyt c.
Subject(s)
Aptamers, Nucleotide , Cytochromes c , Quartz Crystal Microbalance Techniques , Fatty Acids , Gold/chemistry , Surface PropertiesABSTRACT
Dendrons are branched synthetic polymers suitable for preparation of nanosized drug delivery systems. Their interactions with biological systems are mainly predetermined by their chemical structure, terminal groups, surface charge, and the number of branched layers (generation). Any new compound intended to be used, alone or in combination, for medical purposes in humans must be compatible with blood. This study combined results from in vitro experiments on human blood and from laboratory experiments designed to assess the effect of amphiphilic phosphorous dendrons on blood components and model membranes, and to examine the presence and nature of interactions leading to a potential safety concern. The changes in hematological and coagulation parameters upon the addition of dendrons in the concentration range of 2-10 µM were monitored. We found that only the combination of higher concentration and higher generation of the dendron affected the selected clinically relevant parameters: it significantly decreased platelet count and plateletcrit, shortened thrombin time, and increased activated partial thromboplastin time. At the same time, occasional small-sized platelet clumps in blood films under the light microscope were observed. We further investigated aggregation propensity of the positively charged dendrons in model conditions using zwitterionic and negatively charged liposomes. The observed changes in size and zeta potential indicated the electrostatic nature of the interaction. Overall, we proved that the low-generation amphiphilic phosphorous dendrons were compatible with blood within the studied concentration range. However, interactions between high-generation dendrons at bulk concentrations above 10 µM and platelets and/or clotting factors cannot be excluded.
ABSTRACT
Polymer nanoparticles and nano/micromotors are novel nanostructures that are of increased interest especially in the diagnosis and therapy of cancer. These structures are modified by antibodies or nucleic acid aptamers and can recognize the cancer markers at the membrane of the cancer cells or in the intracellular side. They can serve as a cargo for targeted transport of drugs or nucleic acids in chemo- immuno- or gene therapy. The various mechanisms, such as enzyme, ultrasound, magnetic, electrical, or light, served as a driving force for nano/micromotors, allowing their transport into the cells. This review is focused on the recent achievements in the development of polymer nanoparticles and nano/micromotors modified by antibodies and nucleic acid aptamers. The methods of preparation of polymer nanoparticles, their structure and properties are provided together with those for synthesis and the application of nano/micromotors. The various mechanisms of the driving of nano/micromotors such as chemical, light, ultrasound, electric and magnetic fields are explained. The targeting drug delivery is based on the modification of nanostructures by receptors such as nucleic acid aptamers and antibodies. Special focus is therefore on the method of selection aptamers for recognition cancer markers as well as on the comparison of the properties of nucleic acid aptamers and antibodies. The methods of immobilization of aptamers at the nanoparticles and nano/micromotors are provided. Examples of applications of polymer nanoparticles and nano/micromotors in targeted delivery and in controlled drug release are presented. The future perspectives of biomimetic nanostructures in personalized nanomedicine are also discussed.
ABSTRACT
Herein, we report ultrasound-propelled graphene-oxide coated gold nanowire motors, functionalized with fluorescein-labeled DNA aptamers (FAM-AIB1-apt), for qualitative detection of overexpressed AIB1 oncoproteins in MCF-7 breast cancer cells. The movement of nanomotors under the ultrasound field facilitated intracellular uptake and resulted in a faster aptamer binding with the target protein and thus faster fluorescence recovery. The propulsion behavior of the aptamer functionalized nanomotors greatly enhanced the fluorescence intensity compared to static conditions. The new aptamer@nanomotor-based strategy offers considerable potential for further development of sensing methodologies towards diagnosis of breast cancer.
Subject(s)
Aptamers, Nucleotide/metabolism , Fluorescein/chemistry , Aptamers, Nucleotide/chemistry , Breast Neoplasms/diagnosis , Breast Neoplasms/metabolism , Breast Neoplasms/pathology , Female , Gold/chemistry , Humans , MCF-7 Cells , Microscopy, Electron, Scanning , Nanotechnology/instrumentation , Nanotechnology/methods , Nanowires/chemistry , SonicationABSTRACT
Understanding the fundamental factors that drive ion solvation structure and transport is key to design high-performance, stable battery electrolytes. Reversible ion solvation and desolvation are critical to the interfacial charge-transfer process across the solid-liquid interface as well as the resulting stability of the solid electrolyte interphase. Herein, we report the study of Li+ salt solvation structure in aprotic solution in the immediate vicinity (â¼20 nm) of the solid electrode-liquid interface using surface-enhanced Raman spectroscopy (SERS) from a gold nanoparticle (Au NP) monolayer. The plasmonic coupling between Au NPs produces strong electromagnetic field enhancement in the gap region, leading to a 5 orders of magnitude increase in Raman intensity for electrolyte components and their mixtures namely, lithium hexafluorophosphate, fluoroethylene carbonate, ethylene carbonate, and diethyl carbonate. Further, we estimate and compare the lithium-ion solvation number derived from SERS, standard Raman spectroscopy, and Fourier transform infrared spectroscopy experiments to monitor and ascertain the changes in the solvation shell diameter in the confined nanogap region where there is maximum enhancement of the electric field. Our findings provide a multimodal spectroscopic approach to gain fundamental insights into the molecular structure of the electrolyte at the solid-liquid interface.
ABSTRACT
This chapter reviews recent achievements in methods of detection of mycotoxins in food. Special focus is on the biosensor technology that utilizes antibodies and nucleic acid aptamers as receptors. Development of biosensors is based on the immobilization of antibodies or aptamers onto various conventional supports like gold layer, but also on nanomaterials such as graphene oxide, carbon nanotubes, and quantum dots that provide an effective platform for achieving high sensitivity of detection using various physical methods, including electrochemical, mass sensitive, and optical. The biosensors developed so far demonstrate high sensitivity typically in subnanomolar limit of detection. Several biosensors have been validated in real samples. The sensitivity of biosensors is similar and, in some cases, even better than traditional analytical methods such as ELISA or chromatography. We believe that future trends will be focused on improving biosensor properties toward practical application in food industry.
Subject(s)
Biosensing Techniques , Chromatography/methods , Food Analysis/methods , Food Contamination/analysis , Immunoassay/methods , Mycotoxins/chemistry , Animals , Food Analysis/instrumentation , HumansABSTRACT
We studied physical properties of the monolayers and bilayer lipid membranes (BLM) formed by calix[6]arene carboxylic acid derivative (CX) and its mixtures with diphytanoylphosphatidylcholine (DPhPC) by means of measurement surface pressure, surface dipole potential and electrostriction. CX forms stable monolayers at an air-water interface and complexes in mixed monolayers contained DPhPC. Calixarenes increase the elastic moduli of lipid monolayers as well as BLM. Cytochrome c (cyt c) specifically binds to CX by incorporation of the amino groups of lysine residues at the protein surface. This binding affected the physical properties of CX monolayers depending on their initial surface pressure. Addition of cyt c into the water subphase induced increase of surface pressure of CX monolayers at relatively low initial pressure (15 mN/m) when monolayer was in liquid expanded state (LE). This may be due interaction of positively charged cyt c with negatively charged carboxylic groups of CX and also by its penetration into the air-water interface. However, much subtle changes were observed for higher initial surface pressure (20 and 35 mN/m) when monolayer is in liquid condensed (LC) and solid (S) state, respectively. Lysine induced substantially lower changes in surface pressure in comparison with that of cyt c.