Emerging Roles of Graphitic Carbon Nitride-based Materials in Biomedical Applications.

Graphite carbon nitride (g-C3N4) is a two-dimensional conjugated polymer with a unique energy band structure similar to graphene. Due to its outstanding analytical advantages, such as relatively small band gap (2.7 eV), low-cost synthesis, high thermal stability, excellent photocatalytic ability, and good biocompatibility, g-C3N4 has attracted the interest of researchers and industry, especially in the medical field. This paper summarizes the latest research on g-C3N4-based composites in various biomedical applications, including therapy, diagnostic imaging, biosensors, antibacterial, and wearable devices. In addition, the application prospects and possible challenges of g-C3N4 in nanomedicine are also discussed in detail. This review is expected to inspire emerging biomedical applications based on g-C3N4.

Maresin1 restrains chronic inflammation and Aß production to ameliorate Alzheimer's disease via modulating ADAM10/17 and its associated neuroprotective signal pathways: A pilot study.

Chronic inflammation is an important pathogenetic factor that leads to the progression of Alzheimer's disease (AD), and specialized pro-resolving lipid mediators (SPMs) play critical role in regulating inflammatory responses during AD pathogenesis. Maresin1 (MaR1) is the latest discovered SPMs, and it is found that MaR1 improves AD cognitive impairment by regulating neurotrophic pathways to protect AD synapses and reduce Aß production, which made MaR1 as candidate agent for AD treatment. Unfortunately, the underlying mechanisms are still largely known. In this study, the AD mice and cellular models were subjected to MaR1 treatment, and we found that MaR1 reduced Aß production to ameliorate AD-related symptoms and increased the expression levels of ADAM10/17, sAPPα and sAPPß to exert its anti-inflammatory role. In addition, as it was determined by Western Blot analysis, we observed that MaR1 could affected the neuroprotective signal pathways. Specifically, MaR1 downregulated p57NTR and upregulated TrkA to activate the p75NTR/TrkA signal pathway, and it could increase the expression levels of p-PI3K and p-Akt, and downregulated p-mTOR to activate the PI3K/AKT/ERK/mTOR pathway. Finally, we verified the role of ADAM10/17 in regulating AD progression, and we found that silencing of ADAM10/17 inactivated the above neuroprotective signal pathways to aggravate AD pathogenesis. In conclusion, MaR1 is verified as potential therapeutic agent for AD by eliminating Aß production, upregulating ADAM10/17, sAPPα and sAPPß, and activating the neuroprotective p75NTR/TrkA pathway and the PI3K/AKT/ERK/mTOR pathway.

Detecting the therapeutic drugs in blood samples through PDMS-printed paper spray mass spectrometry.

In this paper, paper microfluidic channel fabricated by directly screen-printing of polydimethylsiloxane (PDMS) is proposed for paper spray mass spectrometry analysis of therapeutic drugs in the blood samples. Compared with traditional paper spray, PDMS-printed paper spray (PP-PS) allows fluid to flow to the tip of paper with less sample loss which significantly improved the signal intensity of target compounds in blood samples. As paper can reduce the matrix effect, PP-PS also has a greater advantage than electro-spray Ionization (ESI) when directly analyzing complex biological sample in terms of the detection efficiency. Linearity and limits of detection (LOD) were evaluated for five psychotropic drugs: olanzapine, quetiapine, 9-hydroxyrisperidone, clozapine, risperidone. As a result, PP-PS improved the signal intensity of the psychotropic drugs at a concentration of 250 ng/ml in blood samples by a factor of 2-5 times and lowered the relative standard deviation (RSD) by a factor of 2-5.6 times compared with traditional paper spray. And PP-PS also improved signal intensity by a factor of 9-33 times compared with ESI. Quantitative experiments of PP-PS mass spectrometry indicated that the linear range was 5-500 ng/ml and the LOD were improved by a factor of 5-71 times for all these drugs compared with traditional paper spray. In addition, PP-PS was applied to the home-made miniaturized mass spectrometer and the precursor ions of all five psychotropic drugs (250 ng/ml) in the mass spectrometry results were obtained as well. These could prove that PP-PS has the potential to analyze complex biological samples in application on the miniaturized mass spectrometer which can be used outside the laboratory.

Driving risk identification of urban arterial and collector roads based on multi-scale data.

Urban arterial and collector roads, while interconnected within the urban transportation network, serve distinct purposes, leading to different driving risk profiles. Investigating these differences using advanced methods is of paramount significance. This study aims to achieve this by primarily collecting and processing relevant vehicle trajectory data alongside driver-vehicle-road-environment data. A comprehensive risk assessment matrix is constructed to assess driving risks, incorporating multiple conflict and traffic flow indicators with statistically temporal stability. The Entropy weight-TOPSIS method and the K-means algorithm are employed to determine the risk scores and levels of the target arterial and collector roads. Using risk levels as the outcome variables and multi-scale features as the explanatory variables, random parameters models with heterogeneity in means and variances are developed to identify the determinants of driving risks at different levels. Likelihood ratio tests and comparisons of out-of-sample and within-sample prediction are conducted. Results reveal significant statistical differences in the risk profiles between arterial and collector roads. The marginal effects of significant parameters are then calculated separately for arterial and collector roads, indicating that several factors have different impacts on the probability of risk levels for arterial and collector roads, such as the number of movable elements in road landscape pictures, the standard deviation of the vehicle's lateral acceleration, the average standard deviation of speed for all vehicles on the road segment, and the number of one-way lanes on the road segment. Some practical implications are provided based on the findings. Future research can be implemented by expanding the collected data to different regions and cities over longer periods.

Lipidomics study of Liujunzi decoction in hyperlipidemia rats with spleen deficiency based on UPLC-Q-TOF/MS.

Hyperlipidemia refers to the abnormal levels of triglyceride (TG), total cholesterol (TC), low-density lipoprotein (LDL-C) and high-density lipoprotein (HDL-C) in peripheral blood circulation. It is a predominant risk factor underlying cardiovascular and cerebrovascular diseases, including coronary heart disease and atherosclerosis. Furthermore, it is also one of the most prevalent chronic diseases globally. Liujunzi Decoction is the basic prescription for the treatment of spleen and stomach diseases. It can tonify the spleen and qi, remove dampness, and reduce turbidity. Moreover, it is also clinically used for the treatment of spleen deficiency hyperlipidemia. However, its metabolites and therapeutic effect on spleen deficiency hyperlipidemia have not been comprehensively determined in vitro and in vivo. This study established a rat model of spleen deficiency hyperlipidemia by inducing starvation and satiety disorders, exhaustion swimming, and intragastric administration of the fat emulsion. To identify related metabolite changes and serum lipid composition, UPLC-Q-TOF-MS, PCA, and OPLS-DA lipidological methods were performed. The results demonstrated significant changes in rat's signs during the modeling process, which were consistent with the criteria for the syndrome differentiation of spleen deficiency in traditional Chinese medicine. Furthermore, this study identified 100 potential biomarkers in rat serum, of which 52 were associated with lipid synthesis, such as LPC, PC, PI, PE, PA, Cer, SM, etc. The pathways involved were glycerol phospholipid, sphingomyelin, and glycerol ester metabolisms. After the Liujunzi decoction intervention, 56 potential biomarkers were observed in the high-dose group, alleviating the metabolic spectrum imbalance by reducing metabolite levels. In addition, metabolic pathway disturbances were markedly improved. This study provides references for future studies on Liujunzi decoction and furnishes essential data for assessing the relationships between chemical constituents and pharmacological activities of Liujunzi decoction.

Fiber-in-Tube Electrifiable Structure for Virus Filtration Self-Generated Static Electricity by Vibration/Sound.

Fiber has been considered as an ideal material for virus insulation due to the readily available electrostatic adsorption. However, restricted by the electrostatic attenuation and filtration performance decline, their long-lasting applications are unable to satisfy the requirements of medical protective equipment for major medical and health emergencies such as global epidemics, which results in both a waste of resources and environmental pollution. We overcame these issues by constructing a fiber-in-tube structure, achieving the robust reusability of fibrous membranes. Core fibers within the hollow could form generators with tube walls of shell fibers to provide persistent, renewable static electricity via piezoelectricity and triboelectricity. The PM0.3 insulation efficiency achieved 98% even after 72 h of humidity and heat aging, through beating and acoustic waves, which is greatly improved compared with that of traditional nonwoven fabric (∼10% insulation). A mask spun with our fiber also has a low breathing resistance (differential pressure <24.4 Pa/cm2). We offer an approach to enrich multifunctional fiber for developing electrifiable filters, which make the fiber-in-tube filtration membrane able to durably maintain a higher level of protective performance to reduce the replacement and provide a new train of thought for the preparation of other high-performance protective products.

Liquid-liquid phase separation of microtubule-binding proteins in the regulation of spindle assembly.

Cell division is a highly regulated process essential for the accurate segregation of chromosomes. Central to this process is the assembly of a bipolar mitotic spindle, a highly dynamic microtubule (MT)-based structure responsible for chromosome movement. The nucleation and dynamics of MTs are intricately regulated by MT-binding proteins. Over the recent years, various MT-binding proteins have been reported to undergo liquid-liquid phase separation, forming either single- or multi-component condensates on MTs. Herein, we provide a comprehensive summary of the phase separation characteristics of these proteins. We underscore their critical roles in MT nucleation, spindle assembly and kinetochore-MT attachment during the cell division process. Furthermore, we discuss the current challenges and various remaining unsolved problems, highlights the ongoing research efforts aimed at a deeper understanding of the role of the phase separation process during spindle assembly and orientation. Our review aims to contribute to the collective knowledge in this area and stimulate further investigations that will enhance our comprehension of the intricate mechanisms governing cell division.

A biomimetic ion channel shortens the QT interval of type 2 long QT syndrome through efficient transmembrane transport of potassium ions.

Potassium ion transport across myocardial cell membrane is essential for type 2 long QT syndrome (LQT2). However, the dysfunction of potassium ion transport due to genetic mutations limits the therapeutic effect in treating LQT2. Biomimetic ion channels that selectively and efficiently transport potassium ions across the cellular membranes are promising for the treatment of LQT2. To corroborate this, we synthesized a series of foldamer-based ion channels with different side chains, and found a biomimetic ion channel of K+ (BICK) with the highest transport activity among them. The selected BICK can restore potassium ion transport and increase transmembrane potassium ion current, thus shortening phase 3 of action potential (AP) repolarization and QT interval in LQT2. Moreover, BICK does not affect heart rate and cardiac rhythm in treating LQT2 model induced by E4031 in isolated heart as well as in guinea pigs. By restoring ion transmembrane transport tactic, biomimetic ion channels, such as BICK, will show great potential in treating diseases related to ion transport blockade. STATEMENT OF SIGNIFICANCE: Type 2 long QT syndrome (LQT2) is a disease caused by K+ transport disorder, which can cause malignant arrhythmia and even death. There is currently no radical cure, so it is critical to explore ways to improve K+ transmembrane transport. In this study, we report that a small-molecule biomimetic ion channel BICK can efficiently simulate natural K+ channel proteins on the cardiomyocyte and cure E4031-induced LQT2 in guinea pig by restoring K+ transport function for the first time. This study found that the potassium transmembrane transport by BICK significantly reduced the QT interval, which provides a conceptually new strategy for the treatment of LQT2 disease.

Structural annotation of unknown molecules in a miniaturized mass spectrometer based on a transformer enabled fragment tree method.

Structural annotation of small molecules in tandem mass spectrometry has always been a central challenge in mass spectrometry analysis, especially using a miniaturized mass spectrometer for on-site testing. Here, we propose the Transformer enabled Fragment Tree (TeFT) method, which combines various types of fragmentation tree models and a deep learning Transformer module. It is aimed to generate the specific structure of molecules de novo solely from mass spectrometry spectra. The evaluation results on different open-source databases indicated that the proposed model achieved remarkable results in that the majority of molecular structures of compounds in the test can be successfully recognized. Also, the TeFT has been validated on a miniaturized mass spectrometer with low-resolution spectra for 16 flavonoid alcohols, achieving complete structure prediction for 8 substances. Finally, TeFT confirmed the structure of the compound contained in a Chinese medicine substance called the Anweiyang capsule. These results indicate that the TeFT method is suitable for annotating fragmentation peaks with clear fragmentation rules, particularly when applied to on-site mass spectrometry with lower mass resolution.

Qualitative analysis of licorice and strychnine decoction before and after combination using UPLC-QE-Orbitrap-MS.

BACKGROUND AND OBJECTIVE: Glycyrrhiza glabra L. (GG) and Strychnos nux-vomica L. (NV) are traditional Chinese medicines (TCMs). Changes in the chemical composition may occur before and after the GG-NV compatibility. Ultra-performance liquid chromatography Q-exactive Orbitrap mass spectrometry (UPLC-QE-Orbitrap-MS) was applied here to study the difference in the components of the GG and NV decoctions before and after they were combined. The changes in the chemical composition of GG and NV before and after the combination were determined. METHODS: The precise molecular weight, retention time, and fragment ion peak of the different components of the decoctions before and after compatibility were obtained through UPLC-QE-Orbitrap-MS. Differential analysis methods, such as principal component analysis, were used for comparison. RESULTS: In the positive ion mode, 200 new components were added, whereas six components were lost. In the negative ion mode, 144 new compounds were identified, whereas three components were missing. CONCLUSIONS: The compatibility difference between GG and NV was studied through UPLC-QE-Orbitrap-MS. The chemical composition of GG and NV changed before and after compatibility, and a class of compounds different from GG and NV was identified in the co-decoction. This study provides an experimental basis for subsequent research into detoxification mechanisms of the GG-NV combination and offers a new analytical method for investigating the compatibility of various other TCM pairs.

Enhancing Light Outcoupling Efficiency via Anisotropic Low Refractive Index Electron Transporting Materials for Efficient Perovskite Light-Emitting Diodes.

Thanks to the extensive efforts toward optimizing perovskite crystallization properties, high-quality perovskite films with near-unity photoluminescence quantum yield are successfully achieved. However, the light outcoupling efficiency of perovskite light-emitting diodes (PeLEDs) is impeded by insufficient light extraction, which poses a challenge to the further advancement of PeLEDs. Here, an anisotropic multifunctional electron transporting material, 9,10-bis(4-(2-phenyl-1H-benzo[d]imidazole-1-yl)phenyl) anthracene (BPBiPA), with a low extraordinary refractive index (ne) and high electron mobility is developed for fabricating high-efficiency PeLEDs. The anisotropic molecular orientations of BPBiPA can result in a low ne of 1.59 along the z-axis direction. Optical simulations show that the low ne of BPBiPA can effectively mitigate the surface plasmon polariton loss and enhance the photon extraction efficiency in waveguide mode, thereby improving the light outcoupling efficiency of PeLEDs. In addition, the high electron mobility of BPBiPA can facilitate balanced carrier injection in PeLEDs. As a result, high-efficiency green PeLEDs with a record external quantum efficiency of 32.1% and a current efficiency of 111.7 cd A-1 are obtained, which provides new inspirations for the design of electron transporting materials for high-performance PeLEDs.

Visible-Light-Promoted Selenylation/Cyclization of o-Alkynyl Benzylazides/o-Propargyl Arylazides: Synthesis of Seleno-Substituted Isoquinolines and Quinolines.

A simple and efficient visible-light-promoted selenylation/cyclization of o-alkynyl benzylazides/o-propargyl arylazides have been realized for the practical synthesis of seleno-substituted isoquinolines and quinolines. This strategy provides the synthesis of valuable seleno-substituted isoquinoline and quinoline derivatives via the construction of one C(sp2)-Se bond and one C-N bond within one process.

Diverse thermal desorption combined with self-aspirating corona discharge ionization for direct mass spectrometry analysis of complex samples.

The thermal desorption (TD) technique is widely employed in modern mass spectrometry to facilitate the detection of non-volatile analytes. In this study, we developed a compact TD device based on a small resistance wire and coupled it with a self-aspirating corona discharge ionization (CDI) source to conduct direct MS analysis of various liquid and solid samples. Due to its small size and low heat capacity, the temperature of the TD module can be flexibly and rapidly modulated by controlling the power sequence. Multiple heating modes, including pulse heating (PH), isothermal heating, and step heating (SH), are realized and characterized, and then applied for the detection of different real samples. In particular, the PH mode is suitable for the simultaneous detection of multiple components in samples with relatively simple matrices, while the SH mode is capable of component separation. In addition, the sensitivity and quantitative capability of the TD-CDI system for DEP solutions were tested, showing acceptable stability with a relative standard deviation of about 6.7% and a detection limit of 0.088 ng. Overall, the developed TD-CDI system provides a simple, convenient, and versatile tool for direct mass spectrometry analysis of real samples.

Prediction of driving stress on high-altitude expressway using driving environment features: A naturalistic driving study in Tibet.

OBJECTIVE: Owing to the harsh environment in high-altitude areas, drivers experience significant driving stress. Compared with urban roads or expressways in low-altitude areas, the driving environment in high-altitude areas has distinct features, including mountainous environments and a higher proportion of trucks and buses. This study aims to investigate the feasibility of predicting stress levels through elements in the driving environment. METHODS: Naturalistic driving tests were conducted on an expressway in Tibet. Driving stress was assessed using heart rate variability (HRV)-based indicators and classified using K-means clustering. A DeepLabv3 model was built to conduct semantic segmentation and extract environment elements from the driving scenarios recorded through a camera next to the driver's eyes. A decision tree and 4 other ensemble learning models based on decision trees were built to predict driving stress levels using the environment elements. RESULTS: Fifty-six indicators were extracted from the driving environment. Results of the prediction models demonstrate that extreme gradient boosting has the best overall performance with the F1 score (harmonic mean of the precision and recall) and G-mean (geometric mean of sensitivity and specificity) reaching 0.855 and 0.890, respectively. Indicators based on the variation rate of trucks and buses have high feature importance and exhibit positive effects on driving stress. Indicators reflecting the proportion of mountain, road, and sky features negatively affect the expected levels of driving stress. Additionally, the mountain feature demonstrates multidimensional effects, because driving stress is positively affected by indicators of the variation rate for mountain elements. CONCLUSIONS: This study validates the prediction of driving stress using environment elements in the driver's field of view and extends its application to high-altitude expressways with distinct environmental characteristics. This method provides a real-time, less intrusive, and safer method of driving stress assessment and prediction and also enhances the understanding of the environmental determinants of driving stress. The results hold promising applications, including the development of a driving state assessment and warning module as well as the identification of high-risk road sections and implementation of control measures.

Exploring the molecular mechanism of Chlorella vulgaris in response to androstenedione exposure based on genes continuously up-regulated in transcription analysis.

Androstenedione (ADSD) is one of the widely detected androgens in diverse aquatic environments. However, there were few reports on the molecular mechanism of Chlorella vulgaris exposure to ADSD. In our previous research, we have investigated the genes associated with chlorophyll metabolism in Chlorella vulgaris response to ADSD. In this study, we focus on continuously up-regulated genes to explore the mechanism underlying Chlorella vulgaris resistance to ADSD toxicity. Chlorella vulgaris was exposed to ADSD with five concentration gradients. The continuously up-regulated genes were enriched by Series Test of Cluster (STC) analysis and verified by qRT-PCR. Microalgae Super Oxidase Dimutase (SOD) and Microalgae Malonic dialdehyde (MDA), two indicators of oxidative stress, were determined by ELISA after exposure to ADSD. The results showed that ADSD can stimulate the production of extracellular polymeric substances (EPS) and lead to enlargement in the cell body of Chlorella vulgaris. In addition, steroid biosynthesis and oxidoreductase activity processes were consistently up-regulated upon exposure to ADSD. In conclusion, our study highlighted the crucial role of phenotypic modification, hormone synthesis, and redox mechanisms in protecting Chlorella vulgaris cells from the harmful effects of ADSD contamination.

Tristate Photonic Crystal Film with Structural, Fluorescent, and Up-Conversion Luminescent Color for Multilevel Anticounterfeiting.

Counterfeit items are growing worldwide, affecting the global economy and human health. Anticounterfeiting tags based on a physical microstructure or chemical materials have enjoyed long-term commercial success due to their visualization and inexpensive production. However, conventional anticounterfeiting tags can be readily imitated. Herein, we have overcome this limitation by assembling colloidal nanospheres and two luminescent micromaterials into a composited photonic crystal (PhC) and achieved massive scale-up fabrication of multilevel anticounterfeiting PhC films in just several minutes of thermal rolling. The fabricated PhC film exhibits three optical states, including angle-dependent structural color (reflectivity = 66%) under white light, emits green light under 980 nm light, and emits red light under ultraviolet light. Multilevel anticounterfeiting colorful images were obtained by further use of masking templates, which integrate colors from both physically colored microstructures and chemical luminescent materials. Besides, the thermal-rolling process also shows excellent feasibility for assembling microunits with different sizes into high-quality functional PhC films.

Telomerase reverse transcriptase gene polymorphisms and cervical cancer susceptibility in high-risk human papillomavirus-infected women.

OBJECTIVE: To investigate the relationship between Human telomerase reverse transcriptase (hTERT) gene polymorphisms and the susceptibility and clinicopathological parameters of cervical cancer in women infected with high-risk human papillomavirus (HR-HPV). METHOD: A total of 380 patients with HPV-infected cervical cancer who were admitted to the Jilin province Maternal and Child Health Care Hospital (Jilin province Obstetrics Quality Control Center) from July 2019 to July 2023 were selected as case group, and 408 women with negative HPV results in the cervical cancer screening results of the physical examination in the same hospital were selected as the control group. Restriction fragment length polymorphisms polymerase chain reaction was used to detect the polymorphisms of hTERT, and its relationship with the susceptibility to high-risk HPV infection and clinicopathological parameters in patients with cervical cancer was analysed. RESULTS: Individuals carrying the GA and AA genotypes of rs2736122 were significantly associated with an increased risk of cervical cancer when compared with the GG genotype and the adjusted ORs were 0.53 (0.37-0.79) for the AA genotype and 0.73 (0.59-0.88) for the A allele genotype. Besides, GG genotype or G allele of rs2853677 presented a significant influence on cervical cancer, with ORs of 0.59 (0.41-0.86) and 10.77 (0.63-0.94), respectively, when compared with the AA genotype. And rs2853677 have statistically significant difference in tumour diameter and degree of differentiation subgroup(p < 0.05). CONCLUSION: The results of this study indicate that the hTERT gene rs2736122AA and rs2853677 GG genotypes can increase the susceptibility of high-risk HPV infection in cervical cancer patients. And rs2853677 is related to tumours above 4 cm and highly differentiated tumours. But both have nothing to do with the patient's chemotherapy sensitivity.

Phytochemistry and Pharmacology of Eleutherococcus sessiliflorus (Rupr. & Maxim.) S.Y.Hu: A Review.

Eleutherococcus sessiliflorus (Rupr. & Maxim.) S.Y.Hu (E. sessiliflorus), a member of the Araliaceae family, is a valuable plant widely used for medicinal and dietary purposes. The tender shoots of E. sessiliflorus are commonly consumed as a staple wild vegetable. The fruits of E. sessiliflorus, known for their rich flavor, play a crucial role in the production of beverages and fruit wines. The root barks of E. sessiliflorus are renowned for their therapeutic effects, including dispelling wind and dampness, strengthening tendons and bones, promoting blood circulation, and removing stasis. To compile a comprehensive collection of information on E. sessiliflorus, extensive searches were conducted in databases such as Web of Science, PubMed, ProQuest, and CNKI. This review aims to provide a detailed exposition of E. sessiliflorus from various perspectives, including phytochemistry and pharmacological effects, to lay a solid foundation for further investigations into its potential uses. Moreover, this review aims to introduce innovative ideas for the rational utilization of E. sessiliflorus resources and the efficient development of related products. To date, a total of 314 compounds have been isolated and identified from E. sessiliflorus, encompassing terpenoids, phenylpropanoids, flavonoids, volatile oils, organic acids and their esters, nitrogenous compounds, quinones, phenolics, and carbohydrates. Among these, triterpenoids and phenylpropanoids are the primary bioactive components, with E. sessiliflorus containing unique 3,4-seco-lupane triterpenoids. These compounds have demonstrated promising properties such as anti-oxidative stress, anti-aging, antiplatelet aggregation, and antitumor effects. Additionally, they show potential in improving glucose metabolism, cardiovascular systems, and immune systems. Despite some existing basic research on E. sessiliflorus, further investigations are required to enhance our understanding of its mechanisms of action, quality assessment, and formulation studies. A more comprehensive investigation into E. sessiliflorus is warranted to delve deeper into its mechanisms of action and potentially expand its pharmaceutical resources, thus facilitating its development and utilization.

Experimental Study on the Mechanical Properties and Influencing Factors of Glass Fiber-Reinforced Permeable Concrete.

In order to improve the mechanical properties and deformation characteristics of permeable concrete, glass fiber was added to this type of concrete. Based on an unconfined compressive strength test, non-contact full-field strain measurement system, and scanning electron microscopy test, the effects of aggregate particle composition, shaking time, fly ash content, fiber length, and fiber content on the strength and permeability of permeable concrete were studied. The results show that the strength and water permeability of permeable concrete are negatively correlated with an increase in shaking time. When the aggregate particle size is 5-10 mm, the permeable concrete has both good strength and permeability. Proper incorporation of fly ash improves the compactness inside the structure. The influence of different lengths of glass fiber on the strength of permeable concrete first increases and then decreases, and the permeable property decreases. With the same fiber length, the strength increases first and then decreases with an increase in the content, while the porosity and water permeability coefficient decrease. Under the test conditions, when the length of glass fiber is 6 mm, and the dosage is 2 kg/m3, the strength performance of permeable concrete is the best, and the permeability effect is good at the same time.

Mechanical Properties of Fiber-Reinforced Permeable Geopolymer Concrete.

In this paper, permeable geopolymer concrete with high compressive strength and permeability is prepared using alkali-activated metakaolin as a slurry, and its mechanical properties are reinforced by adding steel fibers. The influencing factors of the strength, porosity and permeability coefficient of the fiber-reinforced permeable geopolymer concrete, as well as its microstructure and curing mechanism, are determined by conducting an unconfined compressive strength test, scanning electron microscopy, energy-dispersive spectroscopy and X-ray diffraction. The test results show that, under the water permeability required to meet the specification conditions, when the alkali activator modulus is 1.4 and the activation-to-solid ratio is 0.9, the effect of metakaolin activation is the most obvious, and the unconfined compressive strength of the permeable geopolymer concrete is the highest. Moreover, the paste formed via the alkali activation of metakaolin contains a large number of silica-oxygen and aluminum-oxygen bonds with a dense and crack-free structure, which enables the paste to tightly combine with the aggregates; the strength of the permeable geopolymer concrete is early strength, and its strength at a curing age of 3 days is the highest. The strength at a curing age of 3 days can reach 43.62% of the 28-day strength; the admixture of steel fiber can effectively improve the strength of the permeable concrete, and with an increase in the amount of admixture, the strength of the fiber shows a trend of increasing, and then decreasing. Under the conditions of this test, a volume of steel fiber of 0.3% enables the optimum unconfined compressive strength to be reached.