ABSTRACT
Photo-responsive liquid crystal polymers (LCPs) have potential application value in flexible robots, artificial muscles, and microfluidic control. In recent years, significant progress has been made in the development of LCPs. However, the preparation of LCPs with continuous and controllable stepwise deformation capabilities remains a challenge. In this study, visible photo-responsive cyanostilbene monomer, UV photo-responsive azobenzene monomer, and multiple hydrogen bond crosslinker are used to prepare photo-responsive LCPs capable of achieving continuously and controllable stepwise deformation. The comprehensive investigation of the multiple light response ability and photo-induced deformation properties of these copolymers is conducted. The results reveal that in the first stage of photo-induced deformation under 470 nm blue light irradiation, the deformation angle decreases with a reduction in cyanostilbene content in the copolymer component, ranging from 40° in AZ0-CS4 to 0° in AZ4-CS0. In the second stage of photo-induced deformation under 365 nm UV irradiation, the deformation angle increases with the increase of azobenzene content, ranging from 0° of AZ0-CS4 to 89.4° of AZ4-CS0. Importantly, the deformation between these two stages occurs as a continuous process, allowing for a direct transition from the first-stage to the second-stage deformation by switching the light source from 470 to 365 nm.