ABSTRACT
Region-specific genetic manipulation of glial cells remains challenging due to the lack of anatomically selective transgenic models. Although local transduction is achievable with viral vectors, uniform recombination can be challenging in larger brain regions. We investigated the efficacy of intraparenchymal delivery of the tamoxifen metabolite endoxifen using inducible cre reporter mice. After observing localized reporter induction following stereotaxic injections of endoxifen in CX3CR1creERT2 mice, we carried out chronic delivery via osmotic pumps attached to bilateral cannulas made of stainless steel or microfluidic polymer fibers. Analysis of reporter expression in sections or iDISCO-cleared brains from TMEM119creERT2 mice revealed widespread induction following chronic infusion. Neuronal damage and gliosis were more prevalent around steel cannulas than polymer fibers, and glial reactivity was further attenuated when devices were implanted two months before drug delivery. In summary, region-specific recombination is achievable in glia with minimal tissue damage after endoxifen delivery via microfluidic polymer implants.
Subject(s)
Microglia , Polymers , Mice , Animals , Microglia/metabolism , Microfluidics , Tamoxifen/pharmacologyABSTRACT
Progress in understanding brain-viscera interoceptive signaling is hindered by a dearth of implantable devices suitable for probing both brain and peripheral organ neurophysiology during behavior. Here we describe multifunctional neural interfaces that combine the scalability and mechanical versatility of thermally drawn polymer-based fibers with the sophistication of microelectronic chips for organs as diverse as the brain and the gut. Our approach uses meters-long continuous fibers that can integrate light sources, electrodes, thermal sensors and microfluidic channels in a miniature footprint. Paired with custom-fabricated control modules, the fibers wirelessly deliver light for optogenetics and transfer data for physiological recording. We validate this technology by modulating the mesolimbic reward pathway in the mouse brain. We then apply the fibers in the anatomically challenging intestinal lumen and demonstrate wireless control of sensory epithelial cells that guide feeding behaviors. Finally, we show that optogenetic stimulation of vagal afferents from the intestinal lumen is sufficient to evoke a reward phenotype in untethered mice.
ABSTRACT
Deep-brain stimulation (DBS) with implanted electrodes revolutionized treatment of movement disorders and empowered neuroscience studies. Identifying less invasive alternatives to DBS may further extend its clinical and research applications. Nanomaterial-mediated transduction of magnetic fields into electric potentials offers an alternative to invasive DBS. Here, we synthesize magnetoelectric nanodiscs (MENDs) with a core-double shell Fe3O4-CoFe2O4-BaTiO3 architecture with efficient magnetoelectric coupling. We find robust responses to magnetic field stimulation in neurons decorated with MENDs at a density of 1 µg/mm2 despite individual-particle potentials below the neuronal excitation threshold. We propose a model for repetitive subthreshold depolarization, which combined with cable theory, corroborates our findings in vitro and informs magnetoelectric stimulation in vivo. MENDs injected into the ventral tegmental area of genetically intact mice at concentrations of 1 mg/mL enable remote control of reward behavior, setting the stage for mechanistic optimization of magnetoelectric neuromodulation and inspiring its future applications in fundamental and translational neuroscience.
ABSTRACT
The nervous and immune systems are intimately related in the brain and in the periphery, where changes to one affect the other and vice-versa. Immune cells are responsible for sculpting and pruning neuronal synapses, and play key roles in neuro-development and neurological disease pathology. The immune composition of the brain is tightly regulated from the periphery through the blood-brain barrier (BBB), whose maintenance is driven to a significant extent by extracellular matrix (ECM) components. After a brain insult, the BBB can become disrupted and the composition of the ECM can change. These changes, and the resulting immune infiltration, can have detrimental effects on neurophysiology and are the hallmarks of several diseases. In this review, we discuss some processes that may occur after insult, and potential consequences to brain neuroimmunology and disease progression. We then highlight future research directions and opportunities for further tool development to probe the neuro-immune interface.
ABSTRACT
Direct injection of therapies into tumors has emerged as an administration route capable of achieving high local drug exposure and strong anti-tumor response. A diverse array of immune agonists ranging in size and target are under development as local immunotherapies. However, due to the relatively recent adoption of intratumoral administration, the pharmacokinetics of locally-injected biologics remains poorly defined, limiting rational design of tumor-localized immunotherapies. Here we define a pharmacokinetic framework for biologics injected intratumorally that can predict tumor exposure and effectiveness. We find empirically and computationally that extending the tumor exposure of locally-injected interleukin-2 by increasing molecular size and/or improving matrix-targeting affinity improves therapeutic efficacy in mice. By tracking the distribution of intratumorally-injected proteins using positron emission tomography, we observe size-dependent enhancement in tumor exposure occurs by slowing the rate of diffusive escape from the tumor and by increasing partitioning to an apparent viscous region of the tumor. In elucidating how molecular weight and matrix binding interplay to determine tumor exposure, our model can aid in the design of intratumoral therapies to exert maximal therapeutic effect.
Subject(s)
Collagen/genetics , Immunotherapy/methods , Interleukin-2/pharmacology , Melanoma, Experimental/therapy , Receptors, Immunologic/genetics , Skin Neoplasms/therapy , Allografts , Animals , Carrier Proteins/genetics , Carrier Proteins/immunology , Cell Line, Tumor , Collagen/immunology , Female , Gene Library , Injections, Intralesional , Interleukin-2/genetics , Interleukin-2/immunology , Interleukin-2/pharmacokinetics , Melanoma, Experimental/diagnostic imaging , Melanoma, Experimental/genetics , Melanoma, Experimental/mortality , Mice , Mice, Inbred C57BL , Peptides/genetics , Peptides/immunology , Positron-Emission Tomography , Protein Binding , Protein Engineering/methods , Receptors, Immunologic/immunology , Recombinant Fusion Proteins/genetics , Recombinant Fusion Proteins/immunology , Saccharomyces cerevisiae/genetics , Saccharomyces cerevisiae/metabolism , Serum Albumin/genetics , Serum Albumin/immunology , Skin Neoplasms/diagnostic imaging , Skin Neoplasms/genetics , Skin Neoplasms/mortality , Survival Analysis , Tumor Burden/drug effectsABSTRACT
Anti-tumour inflammatory cytokines are highly toxic when administered systemically. Here, in multiple syngeneic mouse models, we show that the intratumoural injection of recombinantly expressed cytokines bound tightly to the common vaccine adjuvant aluminium hydroxide (alum) (via ligand exchange between hydroxyls on the surface of alum and phosphoserine residues tagged to the cytokine by an alum-binding peptide) leads to weeks-long retention of the cytokines in the tumours, with minimal side effects. Specifically, a single dose of alum-tethered interleukin-12 induced substantial interferon-γ-mediated T-cell and natural-killer-cell activities in murine melanoma tumours, increased tumour antigen accumulation in draining lymph nodes and elicited robust tumour-specific T-cell priming. Moreover, intratumoural injection of alum-anchored cytokines enhanced responses to checkpoint blockade, promoting cures in distinct poorly immunogenic syngeneic tumour models and eliciting control over metastases and distant untreated lesions. Intratumoural treatment with alum-anchored cytokines represents a safer and tumour-agnostic strategy to improving local and systemic anticancer immunity.
Subject(s)
Alum Compounds , Cytokines , Alum Compounds/pharmacology , Animals , Immunotherapy , Interleukin-12 , MiceABSTRACT
Fiber drawing enables scalable fabrication of multifunctional flexible fibers that integrate electrical, optical and microfluidic modalities to record and modulate neural activity. Constraints on thermomechanical properties of materials, however, have prevented integrated drawing of metal electrodes with low-loss polymer waveguides for concurrent electrical recording and optical neuromodulation. Here we introduce two fabrication approaches: (1) an iterative thermal drawing with a soft, low melting temperature (Tm) metal indium, and (2) a metal convergence drawing with traditionally non-drawable high Tm metal tungsten. Both approaches deliver multifunctional flexible neural interfaces with low-impedance metallic electrodes and low-loss waveguides, capable of recording optically-evoked and spontaneous neural activity in mice over several weeks. We couple these fibers with a light-weight mechanical microdrive (1g) that enables depth-specific interrogation of neural circuits in mice following chronic implantation. Finally, we demonstrate the compatibility of these fibers with magnetic resonance imaging (MRI) and apply them to visualize the delivery of chemical payloads through the integrated channels in real time. Together, these advances expand the domains of application of the fiber-based neural probes in neuroscience and neuroengineering.
ABSTRACT
Thermal drawing has been recently leveraged to yield multifunctional, fiber-based neural probes at near kilometer length scales. Despite its promise, the widespread adoption of this approach has been impeded by (1) material compatibility requirements and (2) labor-intensive interfacing of functional features to external hardware. Furthermore, in multifunctional fibers, significant volume is occupied by passive polymer cladding that so far has only served structural or electrical insulation purposes. In this article, we report a rapid, robust, and modular approach to creating multifunctional fiber-based neural interfaces using a solvent evaporation or entrapment-driven (SEED) integration process. This process brings together electrical, optical, and microfluidic modalities all encased within a copolymer comprised of water-soluble poly(ethylene glycol) tethered to water-insoluble poly(urethane) (PU-PEG). We employ these devices for simultaneous optogenetics and electrophysiology and demonstrate that multifunctional neural probes can be used to deliver cellular cargo with high viability. Upon exposure to water, PU-PEG cladding spontaneously forms a hydrogel, which in addition to enabling integration of modalities, can harbor small molecules and nanomaterials that can be released into local tissue following implantation. We also synthesized a custom nanodroplet forming block polymer and demonstrated that embedding such materials within the hydrogel cladding of our probes enables delivery of hydrophobic small molecules in vitro and in vivo. Our approach widens the chemical toolbox and expands the capabilities of multifunctional neural interfaces.
ABSTRACT
A biodegradable amphiphilic liquid polymer was designed to form self-emulsifying nanodroplets in water for delivering poorly soluble drugs. The polymer was composed of multiple short blocks of poly(ethylene glycol) (PEG) and poly(caprolactone) (PCL) connected through acid-labile acetal linkages. With an overall average molecular weight of over 18 kDa, the polymer remained as a viscous liquid under room and physiological temperatures. Dispersing the polymer in an aqueous buffer gave rise to highly stable micelle-like nanodroplets with an average size of approximately 15-20 nm. The nanodroplet dispersions underwent reversible temperature-sensitive aggregation with cloud points ranging from 45 to 50 °C, depending on polymer concentration. Nuclear magnetic resonance (NMR) and dynamic light scattering analyses revealed that while the nanodroplets were stable at pH 7.4 for several days, hydrolysis of the acetal linkages in the polymer backbone was much accelerated under mildly acidic pH 5.0, resulting in the formation of large microdroplets. Nile red (NR), a poorly water-soluble fluorophore, can be solubilized in the nanodroplets, and efficient intracellular delivery of NR was achieved. The hydrophobic indocyanine green (ICG) was also encapsulated in the nanodroplets. Near-infrared (NIR) fluorescence imaging and in vivo biocompatibility of the ICG-loaded nanodroplets were demonstrated in mice. In summary, the self-emulsifying nanodroplets of amphiphilic liquid polymer would be a promising material system for poorly soluble drug delivery and imaging in vivo.
Subject(s)
Biocompatible Materials/chemistry , Indocyanine Green/chemistry , Nanoparticles/chemistry , Polyesters/chemistry , Polyethylene Glycols/chemistry , Animals , Biocompatible Materials/chemical synthesis , Cell Line, Tumor , Drug Carriers/chemistry , Drug Delivery Systems , Materials Testing , Mice , Molecular Structure , Particle Size , Polyesters/chemical synthesis , Polyethylene Glycols/chemical synthesis , SolubilityABSTRACT
The objective of this study is to develop a simple biopolymer platform of mucoadhesive wafers that enables effective sublingual delivery and preservation of protein vaccines. The wafers were composed of a series of binary polymer blends of carboxymethylcellulose (CMC) and alginate (ALG). Varying the ratio between CMC and ALG resulted in wafers with different microstructure, mechanical properties, disintegration time, and release kinetics of model compounds. Wafers with high CMC content were highly mucoadhesive to sublingual mucosal tissue and could withstand extensive washing, leading to improved protein permeation into the tissue. On the other hand, wafers with high ALG content were not only mechanically robust, but also able to protect a model enzyme (ß-galactosidase) against lyophilization and heat challenge. HIV gp140 protein loaded in wafers of the optimal composition could be stored and transported without cold chain, while maintaining antigen-specific immunogenicity after sublingual vaccination in mice. These findings established that the CMC/ALG binary blend polymer wafers have the potential to improve the sublingual delivery and storage stability of protein-based vaccines.
Subject(s)
Polymers , Vaccines , Administration, Sublingual , Alginates , Animals , Carboxymethylcellulose Sodium , MiceABSTRACT
Understanding and modulating proton-mediated biochemical processes in living organisms have been impeded by the lack of tools to control local pH. Here, we design nanotransducers capable of converting noninvasive alternating magnetic fields (AMFs) into protons in physiological environments by combining magnetic nanoparticles (MNPs) with polymeric scaffolds. When exposed to AMFs, the heat dissipated by MNPs triggered a hydrolytic degradation of surrounding polyanhydride or polyester, releasing protons into the extracellular space. pH changes induced by these nanotransducers can be tuned by changing the polymer chemistry or AMF stimulation parameters. Remote magnetic control of local protons was shown to trigger acid-sensing ion channels and to evoke intracellular calcium influx in neurons. By offering a wireless modulation of local pH, our approach can accelerate the mechanistic investigation of the role of protons in biochemical signaling in the nervous system.
Subject(s)
Nanoparticles , Protons , Hydrogen-Ion Concentration , Magnetic Fields , MagneticsABSTRACT
Machine learning is a valuable tool in the development of chemical technologies but its applications into supramolecular chemistry have been limited. Here, the utility of kernel-based support vector machine learning using density functional theory calculations as training data is evaluated when used to predict equilibrium binding coefficients of small molecules with cucurbit[7]uril (CB[7]). We find that utilising SVMs may confer some predictive ability. This algorithm was then used to predict the binding of drugs TAK-580 and selumetinib. The algorithm did predict strong binding for TAK-580 and poor binding for selumetinib, and these results were experimentally validated. It was discovered that the larger homologue cucurbit[8]uril (CB[8]) is partial to selumetinib, suggesting an opportunity for tunable release by introducing different concentrations of CB[7] or CB[8] into a hydrogel depot. We qualitatively demonstrated that these drugs may have utility in combination against gliomas. Finally, mass transfer simulations show CB[7] can independently tune the release of TAK-580 without affecting selumetinib. This work gives specific evidence that a machine learning approach to recognition of small molecules by macrocycles has merit and reinforces the view that machine learning may prove valuable in the development of drug delivery systems and supramolecular chemistry more broadly.
Subject(s)
Benzimidazoles/chemistry , Bridged-Ring Compounds/chemistry , Heterocyclic Compounds, 3-Ring/chemistry , Imidazoles/chemistry , Density Functional Theory , Models, Chemical , Support Vector MachineABSTRACT
Synthetic hydrogels are an important class of materials in tissue engineering, drug delivery, and other biomedical fields. Their mechanical and electrical properties can be tuned to match those of biological tissues. In this work, hydrogels that exhibit both mechanical and electrical biomimicry are reported. The presented dual networks consist of supramolecular networks formed from 2:1 homoternary complexes of imidazolium-based guest molecules in cucubit[8]uril and covalent networks of oligoethylene glycol-(di)methacrylate. The viscoelastic properties of human brain tissues are also investigated. The mechanical properties of the dual network gels are benchmarked against the human tissue, and it is found that they both are neuro-mimetic and exhibit cytocompatibility in a neural stem cell model.
Subject(s)
Biomimetic Materials/chemistry , Brain/physiology , Hydrogels/chemistry , Bridged-Ring Compounds/chemistry , Elasticity , Electric Conductivity , Humans , Imidazoles/chemistry , Polyethylene Glycols/chemistry , Rheology , Shear Strength , Tissue EngineeringABSTRACT
To date, the clinical outcomes and survival rates for patients with glioblastoma (GB) remain poor. A promising approach to disease-modification involves local delivery of adjuvant chemotherapy into the resection cavity, thus circumventing the restrictions imposed by the blood-brain barrier. The clinical performance of the only FDA-approved local therapy for GB [carmustine (BCNU)-loaded polyanhydride wafers], however, has been disappointing. There is an unmet medical need in the local treatment of GB for drug delivery vehicles that provide sustained local release of small molecules and combination drugs over several months. Herein, key quantitative lessons from the use of local and systemic adjuvant chemotherapy for GB in the clinic are outlined, and it is discussed how these can inform the development of next-generation therapies. Several recent approaches are highlighted, and it is proposed that long-lasting soft materials can capture the value of stiff BCNU-loaded wafers while addressing a number of unmet medical needs. Finally, it is suggested that improved communication between materials scientists, biomedical scientists, and clinicians may facilitate translation of these materials into the clinic and ultimately lead to improved clinical outcomes.
Subject(s)
Blood-Brain Barrier/metabolism , Brain Neoplasms/drug therapy , Carmustine , Drug Delivery Systems , Glioblastoma/drug therapy , Blood-Brain Barrier/pathology , Brain Neoplasms/metabolism , Brain Neoplasms/pathology , Carmustine/pharmacokinetics , Carmustine/therapeutic use , Chemotherapy, Adjuvant , Glioblastoma/metabolism , Glioblastoma/pathology , HumansABSTRACT
The engineering advantages of soft, nonaqueous, solvent-free supramolecular materials have resulted in their emerging transition and adoption from a predominantly food, cosmetics, and paint industry-driven technology to biocompatible matrices for parenteral drug delivery. Factors that have contributed to this trend are the drastic increase of hydrophobic and combination drugs in the pharmaceutical pipeline and the limitations of hydrated drug delivery materials with regard to poorly soluble drugs and biologics. This review highlights examples of nonaqueous, soft supramolecular materials, illustrates molecular engineering principles that may give rise to novel structures and unique properties, and explores emerging opportunities of application of these materials in parenteral drug delivery.
Subject(s)
Biocompatible Materials/chemistry , Drug Carriers/chemistry , Gels/chemistry , Heterocyclic Compounds/chemistry , Hydrophobic and Hydrophilic Interactions , Nanoparticles/chemistry , Plant Oils/chemistry , Solubility , Vapor PressureABSTRACT
The scalable production of uniformly distributed graphene (GR)-based composite materials remains a sizable challenge. While GR-polymer nanocomposites can be manufactured at a large scale, processing limitations result in poor control over the homogeneity of hydrophobic GR sheets in the matrices. Such processes often result in difficulties controlling stability and avoiding aggregation, therefore eliminating benefits that might have otherwise arisen from the nanoscopic dimensions of GR. Here, we report an exfoliated and stabilized GR dispersion in water. Cucurbit[8]uril (CB[8])-mediated host-guest chemistry was used to obtain supramolecular hydrogels consisting of uniformly distributed GR and guest-functionalized macromolecules. The obtained GR hydrogels show superior bioelectrical properties over identical systems produced without CB[8]. Utilizing such supramolecular interactions with biologically derived macromolecules is a promising approach to stabilize graphene in water and avoid oxidative chemistry.
ABSTRACT
Background: Hyaluronic acid (HA) is a major component of the extracellular matrix (ECM) in the central nervous system and the only purely supramolecular glycosaminoglycan. Much focus has been given to using this high molecular weight polysaccharide for tissue engineering applications. In most studies, the backbone of HA is functionalized with moieties that can facilitate network formation through physical self-assembly, or covalent crosslinking (e.g. photo-catalyzed) at concentrations where the polysaccharide does not gel on its own. However, these crosslinks often utilize functional groups not found in biological tissues. Methods: Oscillatory rheology, dynamic light scattering, and scanning electron microscopy were used to study albumin/HA structures. Dynamic light scattering and transmission electron microscopy were used to study albumin/chondroitin sulfate (CS) structures. UV-vis spectroscopy was used to demonstrate the potential for using protein-polymer blends as an ECM-mimetic model to study transport of small molecules. Results: We examine the intermolecular interactions of two major glycosaminoglycans found in the human brain, HA and the lower molecular weight CS, with the model protein albumin. We report the properties of the resulting micro- and nano materials. Our albumin/HA systems formed gels, and albumin/CS systems formed micro- and nanoparticles. These systems are formed from unfunctionalized polysaccharides, which is an attractive and simple method of forming HA hydrogels and CS nanoparticles. We also summarize the concentrations of HA and CS found in various mammalian brains, which could potentially be useful for biomimetic scaffold development. Conclusions: Simple preparation of commercially available charged biomacromolecules results in interesting materials with structures at the micron and nanometer length-scales. Such materials may have utility in serving as cost-effective models of nervous system electrostatic interactions and as in vitro drug release and model system for ECM transport studies.
Subject(s)
Hyaluronic Acid/metabolism , Animals , Chondroitin Sulfates , Glycosaminoglycans , Humans , Hydrogels , Tissue EngineeringABSTRACT
Recent advancements in 3D bioprinting have led to the fabrication of more complex, more precise, and larger printed tissue constructs. As the field continues to advance, it is critical to develop quantitative benchmarks to compare different bio-inks for key cell-biomaterial interactions, including (1) cell sedimentation within the ink cartridge, (2) cell viability during extrusion, and (3) cell viability after ink curing. Here we develop three simple protocols for quantitative analysis of bio-ink performance. These methods are used to benchmark the performance of two commonly used bio-inks, poly(ethylene glycol) diacrylate (PEGDA) and gelatin methacrylate (GelMA), against three formulations of a novel bio-ink, Recombinant-protein Alginate Platform for Injectable Dual-crosslinked ink (RAPID ink). RAPID inks undergo peptide-self-assembly to form weak, shear-thinning gels in the ink cartridge and undergo electrostatic crosslinking with divalent cations during curing. In the one hour cell sedimentation assay, GelMA, the RAPID inks, and PEGDA with xanthan gum prevented appreciable cell sedimentation, while PEGDA alone or PEGDA with alginate experienced significant cell settling. To quantify cell viability during printing, 3T3 fibroblasts were printed at a constant flow rate of 75 µl min-1 and immediately tested for cell membrane integrity. Less than 10% of cells were damaged using the PEGDA and GelMA bio-inks, while less than 4% of cells were damaged using the RAPID inks. Finally, to evaluate cell viability after curing, cells were exposed to ink-specific curing conditions for five minutes and tested for membrane integrity. After exposure to light with photoinitiator at ambient conditions, over 50% of cells near the edges of printed PEGDA and GelMA droplets were damaged. In contrast, fewer than 20% of cells found near the edges of RAPID inks were damaged after a 5 min exposure to curing in a 10 mM CaCl2 solution. As new bio-inks continue to be developed, these protocols offer a convenient means to quantitatively benchmark their performance against existing inks.
Subject(s)
Benchmarking , Biocompatible Materials/chemistry , Bioprinting/methods , Ink , Animals , Cell Survival , Mice , NIH 3T3 Cells , RheologyABSTRACT
The rising prevalence of high throughput screening and the general inability of (1) two dimensional (2D) cell culture and (2) in vitro release studies to predict in vivo neurobiological and pharmacokinetic responses in humans has led to greater interest in more realistic three dimensional (3D) benchtop platforms. Advantages of 3D human cell culture over its 2D analogue, or even animal models, include taking the effects of microgeometry and long-range topological features into consideration. In the era of personalized medicine, it has become increasingly valuable to screen candidate molecules and synergistic therapeutics at a patient-specific level, in particular for diseases that manifest in highly variable ways. The lack of established standards and the relatively arbitrary choice of probing conditions has limited in vitro drug release to a largely qualitative assessment as opposed to a predictive, quantitative measure of pharmacokinetics and pharmacodynamics in tissue. Here we report the methods used in the rapid, low-cost development of a 3D model of a mucopolysaccharidosis type I patient's corpus callosum, which may be used for cell culture and drug release. The CAD model is developed from in vivo brain MRI tracing of the corpus callosum using open-source software, printed with poly (lactic-acid) on a Makerbot Replicator 5X, UV-sterilized, and coated with poly (lysine) for cellular adhesion. Adaptations of material and 3D printer for expanded applications are also discussed.
ABSTRACT
Two-dimensional infrared (2D-IR) spectroscopy was performed on Vaska's complex (VC) and its oxygen adduct (V C-O2) in binary solvent mixtures of chloroform or benzyl alcohol in d6-benzene. The second order rate constants for oxygenation were also measured in these solvent mixtures. The rate constant in chloroform mixtures is linear with mole fraction within the error of the measurements but changes nonlinearly in benzyl alcohol mixtures, displaying a preference for the alcohol over benzene. The rate constants were compared with FTIR spectra of the carbonyl ligand and the frequency-frequency correlation function of this mode determined by 2D-IR. The line shape broadening mechanisms of the linear spectra of the CO bound to VC and V C-O2 are similar to those previously reported for V C-I2. There is a particularly strong correlation between rate constants and homogeneous linewidths of the carbonyl vibration on the V C-O2 product state. Concurrently, the FTIR spectra and spectral diffusion observed by 2D-IR corroborate an increase in solvent heterogeneity around the product. We interpret these results in the context of the potential role of solvent dynamics in facilitating chemical reactivity.