ABSTRACT
Cells sense, respond, and adapt to environmental conditions that cause stress. In a previous study using HeLa cells, we isolated reporter cells responding to the endoplasmic reticulum (ER) stress inducers, thapsigargin and tunicamycin, using a highly sensitive promoter trap vector system. Splinkerette PCR and 5' rapid amplification of cDNA ends (5' RACE) identified a novel transcript that is upregulated by ER stress. Its endogenous expression increased approximately 10-fold in response to thapsigargin and tunicamycin within 1 h, but was down-regulated after 4 h. Because the transcript starts from an intron of a long noncoding RNA known as LINC-PINT, we designated the newly identified transcript TISPL (transcript induced by stressors from LINC-PINTlocus). TISPL was also expressed under several other stress conditions. It was particularly increased > 10-fold upon glucose starvation and 7-fold by arsenite exposure. Furthermore, in silico analyses, including a ChIP-atlas search, revealed that there is an ATF4-binding region with a c/ebp-Atf response element (CARE) downstream of the transcription start site of TISPL. Based on these results, we hypothesized that TISPL may be induced by the phospho-eIF2α and ATF4- axis of the integrated stress response pathway, which is known to be activated by the stress conditions listed above. As expected, knockout of ATF4 abolished the stress-induced upregulation of TISPL. Our results indicate that TISPL may be a useful biomarker for detecting stress conditions that activate ATF4. Our highly sensitive trap vector system proved beneficial in discovering new biomarkers.
Subject(s)
Activating Transcription Factor 4 , Endoplasmic Reticulum Stress , RNA, Long Noncoding , Humans , Activating Transcription Factor 4/genetics , Activating Transcription Factor 4/metabolism , Arsenites/toxicity , Arsenites/pharmacology , Endoplasmic Reticulum Stress/drug effects , Endoplasmic Reticulum Stress/genetics , HeLa Cells , RNA, Long Noncoding/genetics , RNA, Long Noncoding/metabolism , Thapsigargin/pharmacology , Tunicamycin/pharmacology , Up-RegulationABSTRACT
Hydrophobins are small amphiphilic proteins that are conserved in filamentous fungi. They localized on the conidial surface to make it hydrophobic, which contributes to conidial dispersal in the air, and helps fungi to infect plants and mammals and degrade polymers. Hydrophobins self-assemble and undergo structural transition from the amorphous state to the rodlet (rod-like multimeric structure) state. However, it remains unclear whether the amorphous or rodlet state is biologically functional and what external factors regulate state transition. In this study, we analyzed the self-assembly of hydrophobin RolA of Aspergillus oryzae in detail and identified factors regulating this process. Using atomic force microscopy, we observed RolA rodlet formation over time, and determined "rodlet elongation rate" and "rodlet formation frequency." Changes in these kinetic parameters in response to pH and salt concentration suggest that RolA rodlet formation is regulated by the strength of ionic interactions between RolA molecules.
Subject(s)
Aspergillus oryzae , Fungal Proteins , Fungal Proteins/metabolism , Aspergillus oryzae/metabolism , Polymers/chemistry , Polymers/metabolism , Hydrophobic and Hydrophilic InteractionsABSTRACT
Hydrophobins, which are small-secreted proteins with both hydrophobic and hydrophilic parts, can self-assemble into an amphiphilic film at the air-water interface, helping the fungus to form aerial hyphae. In the agaricomycete Pleurotus ostreatus, more than 20 putative hydrophobin genes have been predicted. Of these, two hydrophobin genes, vmh2 and vmh3, are predominantly expressed in the vegetative mycelium. In this study, we focused on the functions of Vmh2 and Vmh3 in vegetative mycelia. Based on the observation of the mycelial cross-section by transmission electron microscopy and the disappearance time of water droplets on the mycelial surface, Vmh2 and Vmh3 were considered essential for the maintenance of the surface hydrophobicity of the mycelium. The Δvmh3 and Δvmh2Δvmh3 strains exhibited relatively slower aerial mycelia formation on a liquid medium, and no significant alteration was observed in Δvmh2 strains. Only the Δvmh3 and Δvmh2Δvmh3 strains grew slower than the wild-type strain under stress conditions involving SDS and H2O2 on agar plates. This study revealed possible distinct roles for these hydrophobins in stress resistance. These results suggest that Agaricomycetes, including P. ostreatus, have evolved to possess multiple different hydrophobins as a means of adapting to various environments.
Subject(s)
Pleurotus , Pleurotus/genetics , Pleurotus/metabolism , Hydrogen Peroxide/metabolism , Mycelium/genetics , Mycelium/metabolism , Hyphae/genetics , Water/chemistry , Fungal Proteins/metabolismABSTRACT
Hydrophobins are small-secreted proteins comprising both hydrophobic and hydrophilic parts, that can self-assemble into an amphiphilic film at the air-liquid interface. More than 20 hydrophobin genes have been estimated in the white-rot fungus Pleurotus ostreatus. In our previous studies, three hydrophobin genes were shown to be predominantly expressed under ligninolytic conditions, and only vmh3 was downregulated in both the delignification-deficient mutant Δgat1 and Δhir1 strains. Here, we focused on the function of the hydrophobin Vmh3 to clarify its physiological role in lignin degradation. When the hyphae were observed by transmission electron microscopy, deletion of vmh3 resulted in the disappearance of black aggregates at the interface between the cell wall and outer environment. Deletion of vmh3 resulted in reduced hydrophobicity when 0.2% sodium dodecyl sulfate was dropped onto the mycelial surface. These results suggest that Vmh3 functions on the cell surface and plays a major role in mycelial hydrophobization. Furthermore, the Δvmh3 strain showed a marked delay in lignin degradation on beech wood sawdust medium, while the production of lignin-modifying enzymes was not reduced. This study demonstrated, for the first time, the possible effect of hydrophobin on lignin degradation by a white-rot fungus.
Subject(s)
Pleurotus , Pleurotus/genetics , Pleurotus/metabolism , Lignin/metabolism , Fungal Proteins/genetics , Fungal Proteins/metabolismABSTRACT
Hydrophobins are small amphipathic proteins conserved in filamentous fungi. In this review, the properties and functions of Aspergillus hydrophobins are comprehensively discussed on the basis of recent findings. Multiple Aspergillus hydrophobins have been identified and categorized in conventional class I and two non-conventional classes. Some Aspergillus hydrophobins can be purified in a water phase without organic solvents. Class I hydrophobins of Aspergilli self-assemble to form amphipathic membranes. At the air-liquid interface, RolA of Aspergillus oryzae self-assembles via four stages, and its self-assembled films consist of two layers, a rodlet membrane facing air and rod-like structures facing liquid. The self-assembly depends mainly on hydrophobin conformation and solution pH. Cys4-Cys5 and Cys7-Cys8 loops, disulfide bonds, and conserved Cys residues of RodA-like hydrophobins are necessary for self-assembly at the interface and for adsorption to solid surfaces. AfRodA helps Aspergillus fumigatus to evade recognition by the host immune system. RodA-like hydrophobins recruit cutinases to promote the hydrolysis of aliphatic polyesters. This mechanism appears to be conserved in Aspergillus and other filamentous fungi, and may be beneficial for their growth. Aspergilli produce various small secreted proteins (SSPs) including hydrophobins, hydrophobic surface-binding proteins, and effector proteins. Aspergilli may use a wide variety of SSPs to decompose solid polymers.
ABSTRACT
Hydrophobins are small secreted amphipathic proteins ubiquitous among filamentous fungi. Hydrophobin RolA produced by Aspergillus oryzae attaches to solid surfaces, recruits polyesterase CutL1, and thus promotes hydrolysis of polyesters. Because the N-terminal region of RolA is involved in the interaction with CutL1, the orientation of RolA on the solid surface is important. However, the kinetic properties of RolA adsorption to solid surfaces with various chemical properties remain unclear, and RolA structures assembled after the attachment to surfaces are unknown. Using a quartz crystal microbalance (QCM), we analyzed the kinetic properties of RolA adsorption to the surfaces of QCM electrodes that had been chemically modified to become hydrophobic or charged. We also observed the assembled RolA structures on the surfaces by atomic force microscopy and performed molecular dynamics (MD) simulations of RolA adsorption to self-assembled monolayer (SAM)-modified surfaces. The RolA-surface interaction was considerably affected by the zeta potential of RolA, which was affected by pH. The interactions of RolA with the surface seemed to be involved in the self-assembly of RolA. Three types of self-assembled structures of RolA were observed: spherical, rod-like, and mesh-like. The kinetics of RolA adsorption and the structures formed depended on the amount of RolA adsorbed, chemical properties of the electrode surface, and the pH of the buffer. Adsorption of RolA to solid surfaces seemed to depend mainly on its hydrophobic interaction with the surfaces; this was supported by MD simulations, which suggested that hydrophobic Cys-Cys loops of RolA attached to all SAM-modified surfaces at all pH values. IMPORTANCE The adsorption kinetics of hydrophobins to solid surfaces and self-assembled structures formed by hydrophobin molecules have been studied mostly independently. In this report, we combined the kinetic analysis of hydrophobin RolA adsorption onto solid surfaces and observation of RolA self-assembly on these surfaces. Since RolA, whose isoelectric point is close to pH 4.0, showed higher affinity to the solid surfaces at pH 4.0 than at pH 7.0 or 10.0, the affinity of RolA to these surfaces depends mainly on hydrophobic interactions. Our combined analyses suggest that not only the adsorbed amount of RolA but also the chemical properties of the solid surfaces and the zeta potential of RolA affect the self-assembled RolA structures formed on these surfaces.
Subject(s)
Aspergillus oryzae , Adsorption , Aspergillus oryzae/metabolism , Fungal Proteins/metabolism , Hydrophobic and Hydrophilic Interactions , Kinetics , Surface PropertiesABSTRACT
Hydrophobins are small, amphipathic proteins secreted by filamentous fungi. Hydrophobin RolA, which is produced by Aspergillus oryzae, attaches to solid surfaces, recruits the polyesterase CutL1, and consequently promotes hydrolysis of polyesters. Because this interaction requires the N-terminal, positively charged residue of RolA to be exposed on the solid surface, the orientation of RolA on the solid surface is important for recruitment. However, the process by which RolA forms the self-assembled structure at the interface remains unclear. Using the Langmuir-Blodgett technique, we analyzed the process by which RolA forms a self-assembled structure at the air-water interface and observed the structures on the hydrophobic or hydrophilic SiO2 substrates via atomic force microscopy. We found that RolA formed self-assembled films in two steps during phase transitions. We observed different assembled structures of RolA on hydrophilic and hydrophobic SiO2 substrates.
Subject(s)
Aspergillus oryzae/metabolism , Fungal Proteins/metabolism , Hydrophobic and Hydrophilic Interactions , Microscopy, Atomic Force , Silicon Dioxide/metabolism , Surface Properties , Water/chemistryABSTRACT
Aspergillus oryzae hydrophobin RolA adheres to the biodegradable polyester polybutylene succinate-co-adipate (PBSA) and promotes PBSA degradation by interacting with A. oryzae polyesterase CutL1 and recruiting it to the PBSA surface. In our previous studies, we found that positively charged amino acid residues (H32, K34) of RolA and negatively charged residues (E31, D142, D171) of CutL1 are important for the cooperative ionic interaction between RolA and CutL1, but some other charged residues in the triple mutant CutL1-E31S/D142S/D171S are also involved. In the present study, on the basis of the 3D-structure of CutL1, we hypothesized that D30 is also involved in the CutL1-RolA interaction. We substituted D30 with serine and performed kinetic analysis of the interaction between wild-type RolA and the single mutant CutL1-D30S or quadruple mutant CutL1-D30S/E31S/D142S/D171S by using quartz crystal microbalance. Our results indicate that D30 is a novel residue involved in the ionic interaction between RolA and CutL1.