Ultra-low fouling photocrosslinked coatings for the selective capture of cells expressing CD44.

The effective control of biointerfacial interactions is of outstanding interest in a broad range of biomedical applications, ranging from cell culture tools to biosensors and implantable medical devices. For many of these applications, highly specific interactions between cells and material surfaces are desired. Sophisticated control over these interactions requires reducing or preventing non-specific interactions on the one hand and displaying highly specific signals that can be recognized by extracellular receptors on the other. We have recently developed ultra-low fouling coatings that can be applied in a single step using photoreactive copolymers of 2-hydroxypropyl acrylamide and N-benzophenone acrylamide. Here, we have expanded this approach by incorporating polymerizable peptide monomers into these copolymers. The monomers QQGWFGAGK(acrylamide) and acrylamide-GAGQQGWF were synthesized after identifying the QQGWF sequence as a binding motif for CD44 by phage display for the first time. Our results demonstrate that UV-crosslinked coatings fabricated using the QQGWFGAGK(acrylamide) monomer are effective at selectively binding hMSC in the presence of HepG2 and HEK293 cells due to the difference in CD44 expression. Our results also demonstrate that the peptide modified coatings retain their low biofouling character using a BCA protein binding assay as well as an E. coli bacterial attachment assay over a 24 h period. Our approach provides an alternative to traditional integrin-mediated selective cell binding on surfaces and opens the door to new diagnostic applications, exploiting the fact that the transmembrane protein CD44 is highly expressed in multiple diseases.

Deposition of Aminomalononitrile-Based Films: Kinetics, Chemistry, and Morphology.

In the last few years, the development of versatile coating chemistries has become a hot topic in surface science after the discovery that catecholamines can lead to conformal coatings upon oxidation from aqueous solutions. Recently, it was found that aminomalononitrile (AMN), a molecule implicated in the appearance of life on earth, is an excellent prototype of novel material-independent surface functionalizing agents leading to conformal and biocompatible coatings in a simple and direct chemical process from aqueous solutions. So far, very little insight has been gained regarding the mechanisms underlying coating deposition. In this paper, we show that the chemical evolution of AMN film deposition under slightly basic conditions is different in solution and on silica. Thereon, the coating proceeds via a nucleation process followed by further deposition of islands which evolve to produce nitrogen-rich superhydrophilic fibrillar structures. Additionally, we show that AMN-based material can form films at the air-solution interface from unshaken solutions. These results open new vistas into the chemistry of HCN-derived species of potential relevance in materials science.

Group 6 Layered Transition-Metal Dichalcogenides in Lab-on-a-Chip Devices: 1T-Phase WS2 for Microfluidics Non-Enzymatic Detection of Hydrogen Peroxide.

Two-dimensional (2D) layered transition-metal dichalcogenides (TMDs) have been placed in the spotlight for their advantageous properties for catalytic and sensing applications. However, little work is done to explore and exploit them in enhancing the performance of analytical lab-on-a-chip (LOC) devices. In this work, we demonstrate a simple, sensitive, and low-cost fabrication of electrochemical LOC microfluidic devices to be used for enzymatic detection. We integrated four t-BuLi exfoliated, group 6 TMD materials (MoS2, MoSe2, WS2, and WSe2) within the LOC devices by the drop-casting method and compared their performance for H2O2 detection. The 1T-phase WS2-based LOC device outperformed the rest of the TMD materials and exhibited a wide range of linear response (20 nM to 20 µM and 100 µM to 2 mM), low detection limit (2.0 nM), and good selectivity for applications in real sample analysis. This work may facilitate the expanded use of electrochemical LOC microfluidics, with its easier integrability, for applications in the field of biodiagnostics and sensing.

3R phase of MoS2 and WS2 outperforms the corresponding 2H phase for hydrogen evolution.

Herein, we compare the bulk, 2H and 3R phases of two most prevalent TMD materials: MoS2 and WS2. The 3R phase outperforms its 2H phase counterpart in hydrogen evolution reaction catalysis and is even comparable with the exfoliated, 1T phase in the case of MoS2.

MoSe2 Nanolabels for Electrochemical Immunoassays.

There is huge interest in biosensors as a result of the demand for personalized medicine. In biomolecular detection, transition-metal dichalcogenides (TMDs) can be used as signal-enhancing elements. Herein, we utilize a solution-based electrochemical exfoliation technique with bipolar electrodes to manufacture MoSe2 nanolabels for biomolecular detection. Prepared MoSe2 nanoparticles (NPs) exhibit electrocatalytic activity toward the hydrogen evolution reaction (HER), and such a property allows it to act as a robust label for magneto-immunoassays toward protein detection. The magneto-immunoassay also displayed good selectivity, a wide linear range of 2 to 500 ng mL-1, high sensitivity (LOD = 1.23 ng mL-1) and reproducibility (RSD = 9.7%). These findings establish the viability and reproducibility of such an exfoliation technique for TMD nanolabels for the development of low costs and efficient biosensing systems.

Transition Metal Oxides for the Oxygen Reduction Reaction: Influence of the Oxidation States of the Metal and its Position on the Periodic Table.

Electrocatalysts have been developed to meet the needs and requirements of renewable energy applications. Metal oxides have been well explored and are promising for this purpose, however, many reports focus on only one or a few metal oxides at once. Herein, thirty metal oxides, which were either commercially available or synthesized by a simple and scalable method, were screened for comparison with regards to their electrocatalytic activity towards the oxygen reduction reaction (ORR). We show that although manganese, iron, cobalt, and nickel oxides generally displayed the ability to enhance the kinetics of oxygen reduction under alkaline conditions compared with bare glassy carbon, there is no significant correlation between the position of a metal on the periodic table and the electrocatalytic performance of its respective metal oxides. Moreover, it was also observed that mixed valent (+2, +3) oxides performed the poorest, compared with their respective pure metal oxides. These findings may be of paramount importance in the field of renewable energy.

Iridium- and Osmium-decorated Reduced Graphenes as Promising Catalysts for Hydrogen Evolution.

Renewable energy sources are highly sought after as a result of numerous worldwide problems concerning the environment and the shortage of energy. Currently, the focus in the field is on the development of catalysts that are able to provide water splitting catalysis and energy storage for the hydrogen evolution reaction (HER). While platinum is an excellent material for HER catalysis, it is costly and rare. In this work, we investigated the electrocatalytic abilities of various graphene-metal hybrids to replace platinum for the HER. The graphene materials were doped with 4f metals, namely, iridium, osmium, platinum and rhenium, as well as 3d metals, namely, cobalt, iron and manganese. We discovered that a few hybrids, in particular iridium- and osmium-doped graphenes, have the potential to become competent electrocatalysts owing to their low costs and-more importantly-to their promising electrochemical performances towards the HER. One of the more noteworthy observations of this work is the superiority of these two hybrids over MoS2 , a well-known electrocatalyst for the HER.

Direct in vivo electrochemical detection of haemoglobin in red blood cells.

The electrochemical behavior of iron ion in haemoglobin provides insight to the chemical activity in the red blood cell which is important in the field of hematology. Herein, the detection of haemoglobin in human red blood cells on glassy carbon electrode (GC) was demonstrated. Red blood cells or raw blood cells was immobilized on a glassy carbon electrode surface with Nafion films employed to sandwich the layer of biological sample firmly on the electrode surface. Cyclic voltammetry (CV) analyses revealed a well-defined reduction peak for haemoglobin at about -0.30 V (vs. Ag/AgCl) at the red blood cell (GC-Nf-RBC-3Nf) and blood (GC-Nf-B-3Nf) film modified GCE in a pH 3.5 phosphate buffer solution. We further demonstrated that the complex biological conditions of a human red blood cell displayed no interference with the detection of haemoglobin. Such findings shall have an implication on the possibilities of studying the electrochemical behaviour of haemoglobin directly from human blood, for various scientific and clinical purposes.

Transition metal (Mn, Fe, Co, Ni)-doped graphene hybrids for electrocatalysis.

The development of electrocatalysts is crucial for renewable energy applications. Metal-doped graphene hybrid materials have been explored for this purpose, however, with much focus on noble metals, which are limited by their low availability and high costs. Transition metals may serve as promising alternatives. Here, transition metal-doped graphene hybrids were synthesized by a simple and scalable method. Metal-doped graphite oxide precursors were thermally exfoliated in either hydrogen or nitrogen atmosphere; by changing exfoliation atmospheres from inert to reductive, we produced materials with different degrees of oxidation. Effects of the presence of metal nanoparticles and exfoliation atmosphere on the morphology and electrocatalytic activity of the hybrid materials were investigated using electron microscopy, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and cyclic voltammetry. Doping of graphene with transition metal nanoparticles of the 4th period significantly influenced the electrocatalysis of compounds important in energy production and storage applications, with hybrid materials exfoliated in nitrogen atmosphere displaying superior performance over those exfoliated in hydrogen atmosphere. Moreover, nickel-doped graphene hybrids displayed outstanding electrocatalytic activities towards reduction of O2 when compared to bare graphenes. These findings may be exploited in the research field of renewable energy.

Metallic impurities availability in reduced graphene is greatly enhanced by its ultrasonication.

Ultrasonication is an inherent part of the major routes for preparation of reduced graphene. It is used to exfoliate graphite oxide to graphene oxide with consequent reduction to reduced graphenes. Metallic impurities in graphenes, originating from the starting material, graphite, have a profound influence on many properties of graphene, such as the electrochemical, catalytic and electronic properties. We show here that ultrasonication greatly enhances the redox availability of metallic impurities within reduced graphenes. Such findings will have a dramatic influence on future graphene processing methodology and applications of graphene.

Bioavailability of metallic impurities in carbon nanotubes is greatly enhanced by ultrasonication.

Metallic impurities within carbon nanotubes (CNTs) are considered as the main cause of their toxicity. Ultrasonication is a common procedure used to purify and obtain homogeneous dispersions of CNTs as well as to mix them with other components for further processing into composites. Herein, the influence of ultrasonication upon the bioavailability of metallic impurities in CNTs was investigated. We showed that even ultrasonication times as short as 5 min significantly enhanced the bioavailability of metallic impurities, which can therefore interact more actively with biologically important molecules. These findings will have profound impact on the processing of CNTs as well as on nanotoxicity studies.