Environmentally Friendly New Catalyst Using Waste Alkaline Solution from Aluminum Production for the Synthesis of Biodiesel in Aqueous Medium.

Red mud (RM) is composed of a waste alkaline solution (pH = 13.3) obtained from the production of alumina. It contains high concentrations of hematite (Fe2O3), goethite (FeOOH), gibbsite [Al(OH)3], a boehmite (AlOOH), anatase (Tetragonal-TiO2), rutile (Ditetragonal dipyramidal-TiO2), hydrogarnets [Ca3Al2(SiO4)3-x(OH)4x], quartz (SiO2), and perovskite (CaTiO3). It was shown to be an excellent catalytic mixture for biodiesel production. To demonstrate the value of RM, an environmentally friendly process of transesterification in aqueous medium using waste cooking oil (WCO), MeOH, and waste alkaline solution (WAS) obtained from aluminum production was proposed. Triglycerides of WCO reacted with MeOH at 60 °C to yield mixtures of fatty acid methyl esters (FAMEs) in the presence of 0.019% (w/w) WAS/WCO using the WAS (0.204 mol L-1, predetermined by potentiometric titration) from aluminum production by the Bayer process. The use of the new catalyst (WAS) resulted in a high yield of the products (greater than 99% yield).

Tandem Transesterification-Esterification Reactions Using a Hydrophilic Sulfonated Silica Catalyst for the Synthesis of Wintergreen Oil from Acetylsalicylic Acid Promoted by Microwave Irradiation.

SiO2-SO3H, with a surface area of 115 m2/g and pore volume of 0.38 cm3g-1, and 1.32 mmol H+/g was used as a 20% w/w catalyst for the preparation of methyl salicylate (wintergreen oil or MS) from acetylsalicylic acid (ASA). A 94% conversion was achieved in a microwave reactor over 40 min at 120 °C in MeOH. The resulting crude product was purified by flash chromatography. The catalyst could be reused three times.

Antioxidant activity evaluation of dried herbal extracts: an electroanalytical approach

ABSTRACT The prevention of chronic and degenerative diseases, is a health concern deeply associated with oxidative stress. Such progressive phenomena can be avoided through exogenous antioxidant intake, which set up a reductant cascade, mopping up damaging free radicals. Medicinal herbs are commonly associated with high antioxidant potential, and hence their health benefits. The commerce of dried herbal extracts movements a big portion of developing countries economy. The determination of medicinal herbs the antioxidant activity capacity is of utmost importance. The assessment of antioxidant activity in phytotherapics is mostly achieved by spectrophotometric assays, however colored substances can produce interferences that do not occur in electroanalytical methods. Therefore, the aim of this paper is to compare spectrophotometric and voltammetric techniques to evaluate antioxidant activity in herbal drugs such as: Ginkgo biloba L., Camellia sinensis (L.) Kuntze, Theaceae; Hypericum perforatum L., Hypericaceae; Aesculus hippocastanum L., Sapindaceae; Rosmarinus officinalis L., Lamiaceae; Morinda citrifolia L., Rubiaceae; Centella asiatica (L.) Urb., Apiaceae; Trifolium pratense L., Fabaceae; Crataegus oxyacantha L., Rosaceae; and Vaccinium macrocarpon Aiton, Ericaceae. The spectrophotometric methods employed were DPPH (2,2-diphenyl-1-picrylhydrazyl), ABTS (2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) and the Folin-Ciocalteu assays. The electroanalytical method used was voltammetry and it was developed a phenoloxidase based biosensor. The redox behavior observed for each herbal sample resulted in distinguishable voltammetric profiles. The highest electrochemical indexes were found to G. biloba and H. perforatum, corroborating to traditional spectrophotometric methods. Thus, the electroanalysis of herbal drugs, may be a promising tool for antioxidant potential assessment.

Efficient Enzyme-Free Biomimetic Sensors for Natural Phenol Detection.

The development of sensors and biosensors based on copper enzymes and/or copper oxides for phenol sensing is disclosed in this work. The electrochemical properties were studied by cyclic and differential pulse voltammetry using standard solutions of potassium ferrocyanide, phosphate/acetate buffers and representative natural phenols in a wide pH range (3.0 to 9.0). Among the natural phenols herein investigated, the highest sensitivity was observed for rutin, a powerful antioxidant widespread in functional foods and ubiquitous in the plant kingdom. The calibration curve for rutin performed at optimum pH (7.0) was linear in a broad concentration range, 1 to 120 µM (r = 0.99), showing detection limits of 0.4 µM. The optimized biomimetic sensor was also applied in total phenol determination in natural samples, exhibiting higher stability and sensitivity as well as distinct selectivity for antioxidant compounds.

Development of a sensor for L-Dopa based on Co(DMG)(2)ClPy/multi-walled carbon nanotubes composite immobilized on basal plane pyrolytic graphite electrode.

L-Dopa is the immediate precursor of the neurotransmitter dopamine, being the most widely prescribed drug in the treatment of Parkinson's disease. A sensitive and selective method is presented for the voltammetric determination of L-Dopa in pharmaceutical formulations using a basal plane pyrolytic graphite (BPPG) electrode modified with chloro(pyridine)bis(dimethylglyoximato)cobalt(III) (Co(DMG)(2)ClPy) absorbed in a multi-walled carbon nanotube (MWCNT). Scanning Electron Microscopy and Fourier Transform Infrared Spectroscopy were used to characterize the materials. The electrocatalytical oxidation of L-Dopa using the Co(DMG)(2)ClPy/MWCNT/BPPG electrode was investigated by cyclic voltammetry and square wave voltammetry. The parameters that influence the electrode response (the amount of Co(DMG)(2)ClPy and of MWCNT, buffer solution, buffer concentration, buffer pH, frequency and potential pulse amplitude) were investigated. Voltammetric peak currents showed a linear response for L-Dopa concentration in the range of 3 to 100 µM, with a sensitivity of 4.43 µAcm(-2)/µM and a detection limit of 0.86 µM. The related standard deviation for 10 determinations of 50 µM L-Dopa was 1.6%. The results obtained for L-Dopa determination in pharmaceutical formulations (tablets) were in agreement with the compared official method. The sensor was successfully applied for L-Dopa selective determination in pharmaceutical formulations.

Genomic polymorphisms provide prognostic information in intermediate-risk acute myeloblastic leukemia.

Current prognostic factors for acute myeloblastic leukemia (AML) are not sufficient to accurately predict the group of patients in the intermediate-risk category who will successfully respond to treatment. Distinct patterns of inherited functional genomic polymorphisms might explain part of these heterogeneous prognoses. We used the allelic discrimination method to identify polymorphisms in GSTT1, SULT1C2, CDA, SXR (drug metabolic pathways), XPD, XPA, XPG, ERCC1, TOP2A (DNA repair), VEGF (angiogenesis), and MDR1 (multidrug resistance) genes in 110 adult patients with intermediate-risk AML, enrolled in the CETLAM-99 prospective trial. A multivariate prognostic model adjusted for age, white blood cell (WBC) count, French-American-British group, cytogenetics, MLL rearrangement, internal tandem duplication of FLT3 (FLT3-ITD), induction courses to achieve complete remission, and germline polymorphisms, was used to detect independent risk factors associated with clinical outcome. This analysis showed an increased risk of refractoriness to chemotherapy in the group of patients with XPA variant alleles (RR = 14; P = .02). In the same model, increased relapse risk was associated with SULT1C2 heterozygosity (RR = 4.1; P = .004), FLT3-ITD (RR 3.3; P = .003), and MDR1 variant alleles (RR = 2.4; P = .02). Adverse prognostic variables for overall survival were XPA (RR = 3.4; P = .02) and MDR1 (RR = 2.1; P = .02) variant alleles, and WBC count (RR = 2.1; P = .02). These findings might be useful in selecting risk-adapted treatment strategies in intermediate-risk AML.