ABSTRACT
Purpose: To prepare a module on 'Digital Dentistry", which can be used to sensitize dental undergraduate students during their final year Prosthodontics curriculum. Methods: Ethical approval (167/Ethics/2022) was taken from the Institution before starting the study. Need assessment was achieved using focused group discussion (Online Zoom meeting) of various stakeholders of the Department of Prosthodontics of the institution. A preliminary module content was prepared in google questionnaire form after thorough literature review by the research team and final content was developed using modified Delphi technique in 3 questionnaire rounds with the help of 27 experts. Result: Thematic analysis of Need Assessment focussed group discussion led to the emergence of both theoretical and practical aspect of learning in digital dentistry. The final module was developed with the process followed in modified Delphi technique. Conclusion: Within the limitations of the study the module of Digital dentistry was developed which can be implemented in most of the dental institutes depending on the resources and available infrastructure.
ABSTRACT
BACKGROUND: Studies comparing the clinical performance of titanium zirconium (Ti-Zr) and titanium (Ti) dental implants subjected to immediate loading in the posterior mandibular region where occlusal forces are higher are sparse in the current literature. Hence, the study aimed to evaluate and compare the clinical outcomes of Ti-Zr and Ti dental implants under immediate functional loading in the mandibular posterior region. METHODS: Forty participants fulfilling the predetermined selection criteria were randomly grouped based on dental implant used; Titanium zirconium (Ti-Zr):20, and Titanium (Ti):20. Dental implants were placed through a standard full-thickness mucoperiosteal flap approach and loaded immediately fulfilling the principle of implant protective occlusion. Clinical parameters including crestal bone loss (CBL), modified plaque index (MPI), probing depth (PD) and modified sulcular bleeding index (MSBI) were measured at baseline and follow-up visits (4, 8, and 12 months). Obtained data were compared with standard tests such as the t-test, Chi-square test, and Mann-Whitney U test. RESULTS: On intergroup comparison, CBL was more in the Ti-Zr group as compared to the Ti group at 4 months (0.72 ± 0.16 mm versus 0.70 ± 0.13 mm), but it was less at 8 months (1.08 ± 0.16 mm versus 1.13 ± 0.13 mm) and 12 months (1.19 ± 0.17 mm versus 1.24 ± 0.12 mm) but the difference was not statistically significant (P > 0.05). Mann-Whitney test also revealed no statistically significant difference in MPI, PD and MSBI at 4 months, 8 months and 12 months recall (P > 0.05). CONCLUSIONS: CBL and periodontal parameters of Ti-Zr dental implants were found similar to Ti dental implants under immediate loading in the posterior mandibular region. However, further studies are needed to determine its long-term efficacy and cost-effectiveness.
Subject(s)
Dental Implants , Mandible , Titanium , Zirconium , Humans , Zirconium/chemistry , Male , Female , Adult , Mandible/surgery , Treatment Outcome , Immediate Dental Implant Loading , Middle Aged , Periodontal Index , Alveolar Bone Loss , Young AdultABSTRACT
PURPOSE: To evaluate the role of anxiety/depression and occlusal factors in bruxism using Hospital Anxiety and Depression Scale and T-Scan III respectively. METHODS: The present case control study was comprising of a group of thirty patients with bruxism (Group Br) and 30 healthy individuals as control group (Group NBr). Subjects were selected from outdoor patients visiting the dental unit with the chief complaint of wearing off/sensitivity of all the teeth due to habitual grinding. The cases were selected by using the diagnostic criteria as given by the American Academy of Sleep Medicine (AASM). Further based on similarities of age and gender, controls were selected. Tooth wear index was recorded using an index given by Ekfeldt et al. Hospital Anxiety and Depression Scale (HADS) questionnaire was administered to both the groups to evaluate anxiety and depression. Recording of occlusal parameters in both the groups was done digitally by using T-Scan III. Statistical analysis was done by using student's t-test, chi square test and Mann Whitney U test. RESULTS: Group Br had significantly greater mean tooth wear index (22.24 ± 11.5) than group NBr (5.17 ± 3.30). Group Br had significantly higher anxiety (9.03 + 1.87/7.17 + 1.82) and depression scores (8 + 1.93/6.17 + 1.23) as compared to NBr. The disclusion time of group Br was 0.652 ± 0.749 and that of group NBr was 0.247 ± 0.289 (p = 0.008). CONCLUSIONS: Subjects with higher level of anxiety, depression and increased disclusion time may have greater predilection towards suffering from bruxism (p < 0.05).
ABSTRACT
Aims: The study compared changes in implant stability and bone loss of implants with different designs using early loading at 6 weeks. Setting and Design: In vivo-comparative study. Materials and Methods: Forty subjects were selected and divided randomly by sealed envelope method in Group X and Group A for early loading for missing single posterior tooth in mandible. Implants in Group X had flared crest module and buttress thread design, whereas implants in Group A had parallel crest module and V-shaped thread design. All subjects were evaluated by Ostell for implant stability at the interval of baseline, 6 weeks, 3 months, and 6 months. ImageJ software was used for measurement of crestal bone loss in intraoral periapical radiographs at the interval of 6 weeks, 3 months, and 6 months. Statistical Analysis Used: Unpaired t test, repeated ANOVA, Tukey post hoc test. Results: The mean bone loss values of Group X at predetermined interval were 1.51 ± 0.20 mm, 2.11 ± 0.21 mm and 2.13 ± 0.21 mm. The mean bone loss values of Group A were 1.79 ± 0.16 mm, 2.92 ± 0.23 mm and 2.95 ± 0.23 mm. The mean bone loss was statistical significant (P < 0.05) at 6 weeks, 3 months and 6 months. It was highly significant in Group A at 6 months (P < 0.001). Conclusions: It was concluded that Group X implants design showed better implant stability and less bone loss when compared to Group A implants design.
Subject(s)
Alveolar Bone Loss , Alveolar Bone Loss/diagnostic imaging , Humans , Mandible/diagnostic imaging , Prostheses and Implants , Radiography , Randomized Controlled Trials as TopicABSTRACT
The purpose of this study was to evaluate whether low-level laser therapy improves healing of the implant surgical site with clinical and biochemical parameters. Thirty patients with an edentulous space spanning a single tooth were selected. The patients were randomly allocated to 1 of 2 groups: control group and test group. The test group received laser energy at a power of 2 J/cm2 with a total of 4-6 J energy over each implant. Clinical parameters (implant stability quotient, probing index, modified sulcus bleeding index) and osteoprotegerin were assessed at baseline and follow-up intervals (2 weeks, 6 weeks, and 3 months). The test group showed significantly higher implant stability quotient than the control group at 2 weeks (57.93 ± 3.95 vs 35.67 ± 3.08; P < . 01) and 3 months (58.86 ± 3.75 vs 67.06 ± 3.78; P < . 01). A significant rise in osteoprotegerin levels of the test group (686.30 ± 125.36 pg/mL at baseline and 784.25 ± 108.30 pg/mL at 3 months; P < . 01) was seen contrary to significant decline in the control group (839.50 ± 249.08 pg/mL at baseline vs 415.30 ± 78.39 pg/mL at 3 months; P < . 01). Within the limitations of the study, the findings suggest that the healing of peri-implant hard and soft tissues may be enhanced with the use of low-level laser therapy as an explicit modality during the postoperative period.
Subject(s)
Dental Implants , Low-Level Light Therapy , Mouth, Edentulous , Dental Implantation, Endosseous , Humans , Wound HealingABSTRACT
PURPOSE: To determine the prevalence of temporomandibular disorders (TMD) in medical university students and to analyze the relationship of TMD with psychological and functional occlusal parameters. MATERIALS AND METHODS: 200 students (mean age 21.81 ± 1.99) were screened for TMD with the TMD Pain Screener. Clinical examinations identified the participants with TMD. Based on their diagnostic criteria for TMD (DC/TMD) axis I diagnosis, participants were divided into three groups: group 1- non-TMD, group 2- pain related TMD and headaches, and group 3- intra-articular joint disorders. Further study was continued involving patients diagnosed with TMD as the study group, and an equal number of age- and sex-matched participants were selected in control group. Among these, emotional distress was evaluated using the "hospital anxiety and depression scale" (HADS). Occlusal evaluations were done by using the T-Scan computerized occlusal analysis system. Occlusion time, left lateral disclusion time, right lateral disclusion time, and protrusion disclusion time were measured with T-Scan III. These parameters were compared among the groups with ANOVA test at a significance level of 0.05. RESULTS: 17% of the population were affected by TMD. The mean HADSd (depression) and HADSa (anxiety) scores were significantly higher (p < 0.05) in group 2 (7.67 ± 3.68; 10.60 ± 3.33) and group 3 (6.89 ± 3.23; 9.26 ± 4.05) as compared to group 1 (3.18 ± 2.33; 5.29 ± 3.21). The mean values of occlusion time, left lateral disclusion time, right lateral disclusion time, and protrusion-disclusion time were also higher for group 2 and group 3 as compared to group 1. CONCLUSIONS: This study found that the prevalence of TMD in this university student population was 17%. There were significant associations of TMD with psychological parameters and functional occlusal parameters.
Subject(s)
Dental Occlusion , Temporomandibular Joint Disorders/epidemiology , Adolescent , Adult , Anxiety/complications , Anxiety/epidemiology , Case-Control Studies , Depression/complications , Depression/epidemiology , Female , Humans , Male , Prevalence , Temporomandibular Joint Disorders/etiology , Temporomandibular Joint Disorders/physiopathology , Temporomandibular Joint Disorders/psychology , Young AdultABSTRACT
PURPOSE: Continuous positive air pressure (CPAP) is recommended for obstructive sleep apnea (OSA) with type 2 diabetes mellitus (T2DM) but cost and compliance are major barriers. A mandibular advancement device (MAD) may be an economical, feasible alternative to CPAP. Various studies have been published to recommend MAD as an alternative to CPAP for OSA, but not regarding its efficacy for patients having OSA as well as T2DM. This study aims to objectively and subjectively evaluate oral appliance therapy using a MAD in patients having OSA as well as T2DM. MATERIALS AND METHODS: Patients who visited the hospital clinic having OSA as well as T2DM were recruited. After giving informed consent, participants were divided into three equally sized groups of three grades of OSA (mild, moderate, severe) on the basis of a polysomnography report and were given intervention of MAD at 50% of maximum mandibular protrusion and 20% of maximum interincisal opening. Objective outcomes were HbA1c level and apnea hypopnea index score (AHI). Subjective outcomes were Epworth Sleepiness Scale (ESS) and the Berlin Questionnaire. All outcomes were assessed before and after 3 months of intervention. RESULTS: A statistically significant difference was seen in all outcomes after intervention with MAD (p < 0.01) in all groups except HbA1c level in participants having severe OSA. CONCLUSION: MAD may be recommended in patients having OSA as well as T2DM. This study provides evidence to inform health care workers about possible use of MAD in OSA with T2DM.
Subject(s)
Diabetes Mellitus, Type 2 , Sleep Apnea, Obstructive , Continuous Positive Airway Pressure , Glycated Hemoglobin , Humans , Mandibular Advancement , Pilot ProjectsABSTRACT
AIM: The aim of the present study was to explore the adjunctive use of Acacia arabica gel in the treatment of chronic periodontitis. METHODS: Single centre, randomised, triple blind, controlled trial on mild to moderate chronic periodontitis patients; Group I (SRPâ¯+â¯Acacia arabica, nâ¯=â¯40) and Group II (SRPâ¯+â¯placebo, nâ¯=â¯40); were analysed for clinical improvements in periodontal pocket depth (PPD) and clinical attachment levels (CAL) at baseline, 15 and 90â¯days on application of gels. Gingival index and plaque index were assessed as secondary parameters. RESULTS: Statistically significant PPD reduction (pâ¯<â¯.05) and CAL gain (pâ¯<â¯.05) was observed with use of Acacia arabica gel. The reduction in sites with moderate PPD was observed more among Group I than Group II and the difference was statistically significant (pâ¯=â¯.001). Secondary outcome variables; Plaque Index and Gingival Index showed better resolution with Acacia arabica gel. CONCLUSION: Acacia arabica leads to better clinical outcomes in patients with mild to moderate chronic periodontitis with effective antiplaque and anti-gingivitis action. It may be recommended adjunct to SRP for maintenance in patients with mild to moderate chronic periodontitis.
ABSTRACT
PURPOSE: Since the services of a qualified practitioner are not easily accessible to the vast majority of the population, the gap is filled literally at the roadside by the ubiquitous unqualified practitioner. The present article emphasizes on the outcome of prosthesis which the quacks deliver for the replacement of natural teeth. MATERIALS AND METHODS: In the present study, we had explored the reason why people visit these quacks, the complications which they face after using fixed dentures delivered by the quack and some solutions to tackle quackery. Data were recorded as a closed-ended questionnaire for 132 participants. RESULTS: Nearly 64% of subjects were facing a problem with the denture and 74.2% of the participants were not even aware of any qualified practitioner. Most common reason to visit the quack was lack of awareness; other reasons were economy, proximity to house, comfortable fixed option, single appointment, and referrals. CONCLUSION: Awareness and orientation programs are possible solutions to spread knowledge, change attitudes, and practice. In addition to that, there should be strict laws abolishing the practice of unqualified practitioner.
ABSTRACT
CONTEXT: Ideal interaction of dental and facial beauty proportions highly influences a harmonious facial appearance. Racial anatomical variations have been significantly noted and using these norms during prosthodontic rehabilitation will be greatly helpful in successful treatment outcome. AIM: The present study aims to correlate various facial landmarks (interpupillary distance [IPD], intercanthal width, bizygomatic width [BZW], and interalar width) with intercanine distance (ICaD) in Indian young adults to determine the mesiodistal width of the maxillary anterior teeth in edentulous patients. SETTING AND DESIGN: This is an observational cross-sectional study. MATERIALS AND METHODS: This study was conducted in 500 individuals ranging in age from 18 to 28 years. IPD, intercanthal width, BZW, and interalar width were measured with a digital caliper (accuracy - 0.01 mm). A "T-" shaped flat metal plate called "canine tip marker" was made to mark the tips of the maxillary canines, which were further measured with the digital caliper. The data were summarized in table form and were statistically analyzed. STATISTICAL ANALYSIS USED: Student's t-test and ANOVA test were used. RESULTS: A significant correlation (P < 0.001) was found between these landmarks with ICaD, in which interalar width shows highest degree of correlation (r = 0.639). ANOVA test showed that maximum number of individuals had < 5% variability range between actual values and calculated values of ICaD for all extraoral facial landmarks except intercanthal width. CONCLUSION: Combination of various facial and oral factors should be considered while selecting artificial teeth. Regression equations obtained can be well used during teeth selection to achieve a significant result.
Subject(s)
Cuspid/anatomy & histology , Face/anatomy & histology , Adolescent , Cephalometry , Cross-Sectional Studies , Female , Humans , Jaw, Edentulous , Male , Maxilla , Odontometry , Prosthodontics , Tooth, Artificial , Young AdultABSTRACT
Nosocomial infections in critically ill/ventilated patients result from bacterial load in oropharyngeal regions. Oral decontamination serves as the easiest effective means of controlling infections. Knowledge, attitude, and practices followed by healthcare personnel in intensive care settings need to be assessed to implement concrete measures in health-care. Survey questionnaire was constructed and implemented following its validation on seventy nursing and paramedical staff working in government and private intensive care units throughout Lucknow city. 21-item questionnaire consisted of three parts of seven questions each. 78% of respondents had knowledge regarding oral care and its importance in critical settings but 44% of respondents considered it to be unpleasant task. 36% of respondents claimed to have provided oral care to all patients in ICU. Uniform guidelines for translation of oral healthcare in ICU settings are not being implemented. Previous studies in literature from various geographic diverse regions also point out to similar lacunae. Based on present survey, most respondents were aware of importance of oral care with protocols covered in academic curriculum. Attitude towards oral care is positive but respondents feel a need for specialised training. Practice for oral care is not sufficient and needs improvement and proper implementation.
ABSTRACT
Color matching to the surrounding skin is extremely important in patients wearing maxillofacial prostheses. It is of utmost importance to know the different techniques of color matching and coloring in maxillofacial prostheses. The purpose of this study is to review the literature data with regard to color matching in maxillofacial prosthetics. An electronic search of peer review restricted to English language dental literature was conducted to identify the relevant scientific article on color matching and coloring in maxillofacial prostheses. The publication year was up to December 2015 so that the search could include all the articles provided in that particular database. Two independent observers independently read the abstracts and later preselected full-text articles. A full-text review was carried out only for 15 articles. Out of the 15 articles, 7 were related to coloring using tinting, spraying, milling, and use of commercial cosmetics. Three studies were related to shade matching in maxillofacial prostheses. Two studies conducted the measurement of color in maxillofacial prostheses. Only one study had explained color and its relevance in maxillofacial prosthetics. Only one study was done for reproducing silicone shade guide matching Indian skin color. In addition, a single pilot study was done to measure facial skin and lip color in a human population sample stratified by race, gender, and age. Currently, there is no evidence discussing the best technique available for perfectly matching the color for the fabrication of maxillofacial prostheses. However, the latest instruments such as spectrophotometer and colorimeters are believed to have improved efficiency in matching the color.
ABSTRACT
Buccal carcinoma is one of the most common oral malignant neoplasms, especially in the South Asian region. Radiotherapy, which plays a significant role in the treatment of this carcinoma, has severe adverse effects. Different types of prosthesis may be constructed to protect healthy tissues from the adverse effects of treatment and concentrate radiation in the region of the tumor mass. However, the technique for fabrication of shielding stent with Lipowitz's alloy (cerrobend/Wood's alloy) has not been well documented. This article describes detailed technique for fabrication of such a stent for unilateral buccal carcinoma patients to spare the unaffected oral cavity from potential harmful effects associated with radiotherapy.
Subject(s)
Alloys , Carcinoma/radiotherapy , Mouth Mucosa , Mouth Neoplasms/radiotherapy , Organ Sparing Treatments/methods , Stents , Carcinoma/diagnosis , Humans , Mouth Mucosa/pathology , Mouth Neoplasms/diagnosisABSTRACT
BACKGROUND: Radiation stents made of Lipowitz metal or cerrobend alloy are commonly used to shield uninvolved tissues from electron beams used in therapeutic radiation treatment of head and neck cancers. However, studies investigating the efficacy of cerrobend shielding stent in patients with unilateral buccal carcinoma remain rare. PURPOSE: To evaluate the efficacy of cerrobend shielding stents in minimizing the potential adverse effects of radiation on oral tissues in buccal carcinoma patients. MATERIALS AND METHODS: Twenty.eight participants were selected for the study based on predetermined inclusion criteria, out of which four participants were lost to follow-.up. Half of the remaining participants. (N = 12) were randomly given cerrobend shielding stent and the remaining 12 formed the control group. The effects of radiotherapy were evaluated by using Radiation Therapy Oncology Group. (RTOG) 0435 Head and Neck adverse effects grading tool. All participants were evaluated for xerostomia, mucositis, dysphagia, salivary changes, dysguesia, pain, trismus and radiation caries at baseline and 1 and 3. months post.radiotherapy. RESULTS: All adverse effects were higher in control compared to study group, with post therapy difference for pain in swallowing, salivary changes, mucositis, dysphagia, dry mouth and caries being statistically significant. CONCLUSIONS: Cerrobend alloy can be used effectively as shielding stent to reduce the adverse effects associated with external beam radiation therapy in unilateral buccal carcinoma patients.
Subject(s)
Alloys/therapeutic use , Carcinoma/radiotherapy , Head and Neck Neoplasms/radiotherapy , Mouth Mucosa/radiation effects , Carcinoma/pathology , Head and Neck Neoplasms/pathology , Humans , Mouth Mucosa/pathology , Radiation Injuries/pathology , Radiotherapy/adverse effects , Radiotherapy Dosage , StentsABSTRACT
STATEMENT OF PROBLEM: Numerous studies of the efficacy of immediately placed implants have been published but only a few of the comparative analyses of the early loading of delayed versus immediately placed dental implants. PURPOSE: The purpose of this pilot prospective clinical study was to evaluate and compare the outcomes of early loaded delayed versus immediately placed implants. MATERIAL AND METHODS: Eighty-eight participants satisfying predefined inclusion and exclusion criteria were selected for this pilot prospective study of 3 years' duration after obtaining institutional review board approval and informed consent. The immediate and the delayed implant placement group each consisted of 44 participants. The anterior mandible canine region was the implant placement site for all participants, and all implants were of the same size and manufacture. Participants were evaluated for hard (crestal bone loss and stability) and soft (periimplant probing depth) tissue implant success parameters at 6 and 12 months after implant placement. Data were analyzed, and results were computed. RESULTS: Intergroup comparisons for mean mesial, mean distal, and mean crestal bone loss at 6 and 12 months after immediate and delayed implant placement showed statistically insignificant differences (P≥.05). Intergroup comparisons of mean mesial, mean distal, mean labial, and mean lingual and mean pocket depth at 6 and 12 months also showed statistically insignificant differences (P≥.05). Comparative mean values using the Periotest also demonstrated statistically insignificant differences (P≥.05). CONCLUSIONS: The short-term outcomes of early loaded delayed and immediately placed implants were comparable. Therefore, early loaded immediately placed implants may be a promising option for the mandibular anterior region.
Subject(s)
Dental Implantation, Endosseous , Immediate Dental Implant Loading , Adult , Alveolar Bone Loss/epidemiology , Alveolar Bone Loss/etiology , Dental Implantation, Endosseous/adverse effects , Dental Implantation, Endosseous/methods , Humans , Immediate Dental Implant Loading/adverse effects , Immediate Dental Implant Loading/methods , Mandible/surgery , Middle Aged , Pilot Projects , Prospective StudiesABSTRACT
PURPOSE: To assess dietary and nutritional changes among the elderly following pros-thodontic rehabilitation. Another objective was to study the relationship, if any, between diet and nutrition, with extent of edentulism and different types of prosthodontic treatment. MATERIALS AND METHODS: One hundred and thirty-five patients who satisfied the inclu-sion and exclusion criteria and agreed to be a part of the study after informed consent were recruited to this longitudinal study. Following selection, they were investigated on four aspects: dental examination, dietary assessment, anthropometric assessment, and serum biochemical assessment. All measurements were collected twice, first at baseline and then 6 months following prosthodontic rehabilitation. Treatment modalities included were complete denture (CD), removable partial denture (RPD), and fixed partial denture (FPD). The RPD group was of two types: distal extension prosthesis (RPDD) and tooth-supported prosthesis (RPDT). Change (post-pre) in outcome measures was compared by one-way ANOVA, and significance of mean difference between the groups was done by Tukey's honestly significance difference post hoc test. RESULTS: The improvement in diet was found to be: CD > RPDD > RPDT > FPD. Significant improvement in weight (p < 0.001), BMI (p < 0.001), protein (p < 0.001), carbohydrate (p = 0.021), calorie (p < 0.001), iron (p = 0.002), and vitamin B (p < 0.001) in group CD as compared to partially edentulous patients (group RPDD + RPDT + FPD) was noted. The protein and calorie intake increased significantly in group RPD as compared to group FPD in partially edentulous patients. CONCLUSION: Prosthetic rehabilitation becomes increasingly important as the level of edentulism increases to improve dietary, anthropometric, and biochemical parameters.
Subject(s)
Denture, Partial, Fixed , Denture, Partial, Removable , Prosthodontics , Aged , Denture, Complete , Humans , Jaw, Edentulous, Partially , Longitudinal StudiesABSTRACT
OBJECTIVES: The objective of the study was to assess the awareness and performance towards dental waste including mercury management policy and practices among the dental practitioners in North India. MATERIALS AND METHODS: An epidemiologic survey was conducted among 200 private dental practitioners. The survey form was composed of 29 self-administered questions frame based on knowledge, attitude, and those regarding the practices of dentists in relation to dental health-care waste management. The resulting data were coded and a statistical analysis was done. RESULTS AND DISCUSSION: About 63.7% of the dentists were not aware of the different categories of biomedical waste generated in their clinics. Only 31.9% of the dentists correctly said that outdated and contaminated drugs come under cytotoxic waste. 46.2% said they break the needle and dispose of it and only 21.9% use needle burner to destroy it. 45.0% of the dentists dispose of the developer and fixer solutions by letting them into the sewer, 49.4% of them dilute the solutions and let them into sewer and only 5.6% return them to the supplier. About 40.6% of the dentists dispose of excess silver amalgam by throwing it into common bin. CONCLUSION: It was concluded that not all dentists were aware of the risks they were exposed to and only half of them observe infection control practices.
Subject(s)
Attitude of Health Personnel , Dental Waste , Mercury/toxicity , Waste Management , Dentists , Health Knowledge, Attitudes, Practice , Humans , India , Mercury/therapeutic use , Surveys and QuestionnairesABSTRACT
Tooth transposition is a severe disturbance of tooth eruptive position and their sequence, which involve certain teeth occurring at any of several specific sites in the mouth. Tooth transposition is of several types and their classification depends on the teeth involved. The review of literature aims to discuss the incidence and identifying factors related to occurrence of this dental anomaly. The present study aims to discuss about the prosthetic treatment of a patient with unilateral maxillary canine - lateral incisor transposition with the absence of permanent lateral incisor.
ABSTRACT
BACKGROUND AND AIM: Replacement of missing ear is a challenging task in which extensive array of materials and techniques have been employed. Materials such as silicones and methacrylate acrylic resins have been widely used for auricular prosthesis. This article describes a simplified procedure for fabricating resilient heat-cured acrylic resin auricular prosthesis, retained with a custom-made acrylic bar with ball attachments. CASE DESCRIPTION AND METHODS: A male patient was reported with right ear loss. A modified technique was preferred to fabricate ear prosthesis with resilient heat-cured acrylic resin in which heat-cured acrylic retentive bar was incorporated. FINDINGS AND OUTCOMES: Contrary to silicones, resilient heat-cured acrylic resin was more economical and compatible with acrylic retentive bar and resulted in a more long-lasting auricular prosthesis. CONCLUSION: Resilient heat-cured acrylic resin was proven to be a better alternative in terms of strength and durability. CLINICAL RELEVANCE: This article presents an economical and simplified approach for the fabrication of prosthesis for a missing ear.
Subject(s)
Ear Auricle/surgery , Ear Deformities, Acquired/rehabilitation , Ear Deformities, Acquired/surgery , Plastic Surgery Procedures/methods , Prostheses and Implants , Acrylic Resins/economics , Cost-Benefit Analysis , Humans , Male , Middle Aged , Prosthesis Design , Prosthesis Implantation/methods , Silicones/economics , Treatment OutcomeABSTRACT
BACKGROUND: The great toe helps in maintaining body balance during standing, walking, running, dancing, and so on. CASE DESCRIPTION AND METHODS: A 22 year-old female patient reported to the department, one month after losing her left hallux in a road accident. Anatomical reconstruction was performed with distraction osteogenesis. The prosthesis was constructed using a wax pattern of the normal hallux to create a silicone prosthesis. The residual limb mold was altered to increase prosthesis retention. FINDINGS AND OUTCOMES: The procedure was economical, conserved materials, and produced lifelike anatomy without requiring artistic expertise. CONCLUSION: Distraction osteogenesis helped in improving function and retention of the prosthesis. Satisfactory esthetic and functional results were observed at the one-year follow-up. CLINICAL RELEVANCE: Distraction osteogenesis of the amputated hallux improved prosthetic prognosis by aiding retention. Modifications were made in the conventional prosthesis fabrication technique to increase retention, as the hallux is in constant movement and/or friction.