Simple new method for labelling of PSMA-11 with 68Ga in NaHCO3.

BACKGROUND: Prostate specific membrane antigen (PSMA) is a type II membrane protein widely expressed on the surface of prostate cancer cells. One of its functions is to act as a receptor mediating the ligand internalization. This PSMA property is employed in the diagnostics and therapy of prostate cancer. Over the years, small molecules with high affinity for PSMA have been developed and labelled with positron emitters (e.g. 68Ga, 18F, 11C, 64Cu, or 86Y). One of these radiolabelled ligands, [68Ga] PSMA-11, is one of the most widespread tracers for PET imaging of the prostate cancer. Many techniques have been proposed and tested for the 68Ga labelling of PSMA-11. The aim of our work was to design a labelling method of PSMA-11 that minimizes number of the used chemicals and steps, providing quantitative labelling yield at laboratory temperature and may be easily automated. METHODOLOGY: A68Ge/68Ga generator eluate in 0.1 M HCl was loaded on an activated Oasis MCX cartridge, and the cartridge was then thoroughly washed with water. The radionuclide 68Ga was eluted from the cartridge with 0.1 M NaHCO3 (pH = 8.5, n = 36) or with the same solution with pH adjusted to 7.2-9.0 (n = 38). Precursor PSMA-11 was mixed directly with the cartridge eluate of 68Ga in 0.1 M NaHCO3 of given pH. For the stability test, samples of 68GaPSMA-11 in 0.1 M NaHCO3 (pH 8.5) were mixed in ratio 1 : 1 with the following solutions: 0.1 M NaHCO3 (pH 8.5), human serum, PBS and 0.9% NaCl. In order to estimate an effect of the time elapsed between 68Ga elution from the cartridge in 0.1 M NaHCO3 (pH 8.5) and the labelling onset of PSMA-11, the latter was initiated 0, 5, 10 and 20 min post elution and radiochemical yield was monitored. All the PSMA-11 labelled samples were subjected to radiochemical purity test using HPLC. The whole process starting from generator elution up to HPLC analysis commencement took 10-15 min. RESULTS: Recovery of 68Ga from cartridge Oasis MCX using 0.1 M NaHCO3 at pH 8.5 was 71.5 ± 1.4%. Thirty six PSMA-11 samples (10 µg in reaction mixture) were labelled at pH 8.5 with total average radiochemical yield of 98 ± 2%. Recovery of 68Ga from cartridge Oasis MCX using 0.1 M NaHCO3 at variable pH of 7.2-9.0 was 62.5 ± 1.8% showing certain decrease with decreasing pH. A total of 138 samples of PSMA-11 were labelled with 68 Ga at variable pH (7.2-9.0) and four different amounts of PSMA-11 (1, 2.5, 5 and 10 µg) resulting in the labelling yields of 54.0 ± 5.3%, 88.2 ± 3.2%, 99.4 ± 0.3% and 99.9 ± 0.1%, respectively. Irrespective of the pH, the radiolabelling yield was quantitative for the molar ratio PSMA-11: 68Ga > 5000 : 1 in the reaction mixture. Stability tests in 0.1 M NaHCO3 (pH 8.5), human serum, PBS and 0.9% NaCl revealed no observable release of 68Ga from the 68Ga-PSMA-11 complex within 3 h. Similarly, the delay between the 68Ga elution from the Oasis MCX cartridge in 0.1 M NaHCO3 (pH 8.5) and start of the labelling of PSMA-11 labelling has no effect on the radiochemical yield. CONCLUSION: A new method of labelling PSMA-11 ligand with 68Ga in 0.1 M NaHCO3 using Oasis MCX cartridges was proposed, developed and tested. The results demonstrated that it is rapid, simple, reproducible and easy to automate.

Detection of tau-fluvalinate resistance in the mite Varroa destructor based on the comparison of vial test and PCR-RFLP of kdr mutation in sodium channel gene.

Varroa destructor is the major cause of honey bee (Apis mellifera) colony losses. Mite control is limited to several miticides. The overuse of tau-fluvalinate has resulted in resistance via a knockdown resistance (kdr) mutation in the sodium channel gene NaVChs (L925V/I/M). In this study, we used the discriminating concentration of tau-fluvalinate (0.25 µg/mL) to detect the resistance of mites in a bioassay. Further, we verified the presence of the kdr mutation in mites from the bioassay via PCR amplification of a fragment of the voltage-gated sodium channel gene (NaVCh), restriction fragment length polymorphisms (RFLPs), and densitometry analyses in pools of surviving or dead mites. Resistance values corresponding to the densitometry of the resistant allele were related to mite survival. In the vial test, the survival of the control group was significantly higher (70.4%) than that of the tau-fluvalinate-treated group (34.3%). Mite survival in the vial test was significantly correlated with the mean proportion of resistance values. Individuals that died after tau-fluvalinate application exhibited an average resistance value of 0.0783, whereas individuals that survived exhibited an average resistance of 0.400. The concentration of tau-fluvalinate in the vials was checked using high performance liquid chromatography under different temperatures and exposure times, and indicates that the stability of tau-fluvalinate stored in the refrigerator (4 ± 1 °C) is at least 14 days. PCR-RFLP of the NaVCh gene fragment verified that the vial test is a suitable, rapid, and cost-effective method for the identification of tau-fluvalinate resistance based on kdr mutation in V. destructor in apiaries.

The influence of temperature and hydration on the sorption properties of bentonite.

The effects of exposure to synthetic groundwater at elevated temperature gradients on the sorption properties of bentonite were investigated using the Mock-Up-Cz experiment. This experiment simulated the vertical placement of a container of radioactive waste according to the Swedish KBS-3 system for a period of more than 3 years. The mineralogical composition, as well as its chemical and physico-chemical properties, including the uptake of (99)TcO(4)(-) and (134)Cs(+), was used to evaluate the chemical changes caused by the long-term exposure of bentonite buffer to thermal and hydration gradients. It was found that the bentonite material was predominantly stable. No more than 2% of the montmorillonite was transformed due to thermal and moisture gradients. It was concluded that the new-formed mineral phases have no significant influence on the ion exchange and sorption properties of bulk bentonite samples.

Isotachophoretic determination of stability constants of Ho and Y complexes with diethylenetriaminepentaacetic acid and 1,4,7,10-tetraazadodecane-N,N',N'',N'''-tetraacetic acid.

The method of capillary isotachophoresis with conductivity detection was applied for the determination of the physico-chemical characteristics (conditional stability constants log beta') of holmium and yttrium complexes with DTPA (diethylenetriaminepentaacetic acid) and DOTA (1,4,7,10-tetraazadodecane-N,N',N'',N'''-tetraacetic acid). The log beta' determination is based on the linear relation between the stability constants of lanthanide-DTPA (lanthanide-DOTA) complexes and the reduction of the zone of the complex owing to the bleeding phenomena (liberating free metal ion). The stability constants calculated using this relationship are comparable with the literary data obtained by other methods for both holmium (log beta'(Ho-DTPA)=21.9, log beta'(Ho-DOTA)=24.5) and yttrium complexes (log beta'(Y-DTPA)=21.2, log beta'(Y-DOTA)=24.4). Capillary isotachophoresis was applied for the determination of the optimum composition of the reaction mixture (metal:ligand ratio) as well.