ABSTRACT
We develop a new type of heterostructure nanocomposite made of reduced graphene oxide-boron carbon nitride nanosheets (rGO-BCN) by B-C covalent bonds. The rGO-BCN nanocomposite delivers a large specific surface and excellent electrochemical properties, and is then constructed into flexible fabric-based high-performance supercapacitor electrodes based on the microfluidic electrospinning technology.
ABSTRACT
Sex pheromones, which consist of multiple components in specific ratios promote intraspecific sexual communications of insects. Plutella xylostella (L.) is a worldwide pest of cruciferous vegetables, the mating behavior of which is highly dependent on its olfactory system. Long trichoid sensilla on male antennae are the main olfactory sensilla that can sense sex pheromones. However, the underlying mechanisms remain unclear. In this study, 3 sex pheromone components from sex pheromone gland secretions of P. xylostella female adults were identified as Z11-16:Ald, Z11-16:Ac, and Z11-16:OH in a ratio of 9.4 : 100 : 17 using gas chromatography - mass spectrometry and gas chromatography with electroantennographic detection. Electrophysiological responses of 581 and 385 long trichoid sensilla of male adults and female adults, respectively, to the 3 components were measured by single sensillum recording. Hierarchical clustering analysis showed that the long trichoid sensilla were of 6 different types. In the male antennae, 52.32%, 5.51%, and 1.89% of the sensilla responded to Z11-16:Ald, Z11-16:Ac, and Z11-16:OH, which are named as A type, B type, and C type sensilla, respectively; 2.93% named as D type sensilla responded to both Z11-16:Ald and Z11-16:Ac, and 0.34% named as E type sensilla were sensitive to both Z11-16:Ald and Z11-16:OH. In the female antennae, only 7.53% of long trichoid sensilla responded to the sex pheromone components, A type sensilla were 3.64%, B type and C type sensilla were both 0.52%, D type sensilla were 1.30%, and 1.56% of the sensilla responded to all 3 components, which were named as F type sensilla. The responding long trichoid sensilla were located from the base to the terminal of the male antennae and from the base to the middle of the female antennae. The pheromone mixture (Z11-16:Ald : Z11-16:Ac : Z11-16:OH = 9.4 : 100 : 17) had a weakly repellent effect on female adults of P. xylostella. Our results lay the foundation for further studies on sex pheromone communications in P. xylostella.
ABSTRACT
We designed a common garden design to collect data on female reproductive traits from three populations of the southern grass lizard Takydromus sexlineatus, testing the hypothesis that a species-specific pattern of seasonal shifts in reproductive allocation should be shared by geographically separated populations. Of the seven examined traits, six differed among populations, with four of the six also differing among successive clutches. Females grew longer during the breeding season and produced more eggs in the first clutch than in the subsequent clutches; egg size was unchanged throughout the breeding season. After removing the influence of female size or postpartum body mass we found the following. First, postpartum body mass, clutch mass, and relative clutch mass were greater in the Wuzhishan population than in the Shaoguan and Zhaoqing populations. Second, egg size was greatest in the Wuzhishan population and smallest in the Zhaoqing population. Third, clutch size was greatest in the Wuzhishan population and smallest in the Shaoguan population. Females did not trade-off egg size against number within each population × clutch combination. Our study validates the hypothesis tested, supports the conventional view that reproductive output is highly linked to maternal body size in lizards, and follows the classic prediction that females with different amounts of resources to invest in reproduction should give priority to adjusting the total number rather than size of their offspring.
ABSTRACT
Limited endoscopic sphincterotomy (EST) combined with endoscopic papillary balloon dilation (EPBD) is widely used. However, the optimal duration of small balloon dilation in choledocholithiasis remains controversial. We aimed to determine the optimal duration for 10 mm diameter balloon dilation after limited EST in choledocholithiasis. In this randomized controlled clinical trial, 320 patients were randomly assigned to receive small balloon dilation (10 mm in diameter) for 1 min (n = 160) or 3 min (n = 160) after deep bile duct cannulation. No significant difference in success rate of stone extraction between the two groups was observed. The incidence of post-ERCP pancreatitis (PEP) was higher in the 1 min group (10.6%) than in the 3 min group (4.4%) (P = 0.034). The logistic regression analysis showed that guidewire into the pancreatic duct, cannulation time > 5 min and 1 min balloon dilation were independent risk factors for PEP. There were no significant differences in other post-ERCP adverse events such as acute cholangitis, bleeding, perforation, etc. between the two groups. In conclusion, 3 min in duration was determined to be the optimal dilation condition for the removal of common bile duct stones.
Subject(s)
Choledocholithiasis , Gallstones , Humans , Sphincterotomy, Endoscopic/adverse effects , Choledocholithiasis/surgery , Dilatation , Common Bile Duct/surgeryABSTRACT
Chitosan (CS) is widely used in biomedical hydrogels due to their similarity to extracellular matrix. However, the preparation method of CS-based hydrogel suffers the drawbacks of tedious operation, time-consuming and energy consumption. Thus, there is an urgent need to develop a rapid synthesis pathway towards hydrogels. In this work, we used a modified CS as a cross-linking agent and acrylic acid (AA) as monomer to prepare a hydrogel through frontal polymerization (FP), which facilitates a facile and rapid method achieved in several minutes. The occurrence of pure FP was confirmed via the frontal velocity and temperature profile measurement. In addition, the as-prepared hydrogel shows excellent mechanical strength up to 1.76 MPa, and the Young's modulus (ranging from 0.16 to 0.56 MPa) is comparable to human skin. The degradation mechanism is revealed by the micro-IR images through the distribution of the functional groups, which is attributed to the breakage of the ether bond. Moreover, the hydrogel exhibits excellent degradability, biocompatibility and antibacterial properties, offering great potentials in tissue engineering. We believe this work not only offers a facile and rapid FP method to fabricate a robust degradable hydrogel, but also provides an effective pathway for the investigation of the degradation mechanism at the chemical bond analysis level.
ABSTRACT
Hydrogels have attracted increasing attention in the biomedical field due to their similarity in structure and composition to natural extracellular matrices. However, they have been greatly limited by their low mechanical strength and self-adhesion for further application. Here, a gel-nanofiber material is designed for wound healing, which synergistically combines the benefits of hydrogels and nanofibers and can overcome the bottleneck of poor mechanical strength and self-adhesion in hydrogels and inadequate healing environment created by nanofibers. First, a nanofiber scaffold composed of polycaprolactone/poly(citric acid)-ε-lysine (PCL/PCE) nanofibers is fabricated via a new strategy of microfluidic electrospinning, which could provide a base for hyaluronic acid-polylysine (HE) gel growth on nanofibers. The prepared HE@PCL/PCE gel-nanofiber possesses high tensile strength (24.15 ± 1.67 MPa), excellent air permeability (656 m3/m2 h kPa), outstanding self-adhesion property, and positive hydrophilicity. More importantly, the prepared gel-nanofiber dressing shows good cytocompatibility and antibacterial properties, achieving a high wound-healing rate (92.48%) and 4.685 mm granulation growth thickness within 12 days. This material may open a promising avenue for accelerating wound healing and tissue regeneration, providing potential applications in clinical medicine.
Subject(s)
Nanofibers , Nanofibers/chemistry , Microfluidics , Anti-Bacterial Agents , Wound Healing , Technology , Bandages , Hydrogels/pharmacology , Polyesters/chemistryABSTRACT
BACKGROUND: Lower limb swelling after total knee arthroplasty (TKA) hinders surgical effectiveness. The poor results of studies on swelling interventions are due to the lack of a classification of swelling causes through appropriate medical tests. A gold standard is missing. This study aimed to clarify the causes of TKA postoperative swelling and how to identify them through indicators and medical tests by consulting a wide range of experts from multiple disciplines. METHOD: The Delphi method was used. A first draft of the index was prepared based on a systematic search of the literature. A total of 11 experts from several disciplines were invited to evaluate the rationality of the indicators and suggest modifications. After two rounds of consultation, the experts reached a consensus, and the consultation was stopped. RESULTS: The response rate of the 11 experts was 100%, and the authoritative Cr was 0.896. Kendall's W values for opinion coordination of the two rounds of consultation were 0.262 and 0.226, respectively (P < 0.001). Among the final indicators, there were 4 primary indicators for swelling cause classification (inflammatory response, poor venous return, joint hematoma, muscle damage, and healing), 19 secondary and 19 tertiary indicators. CONCLUSION: The indications obtained by systematic literature review and multidisciplinary expert consultation are reliable and scientific. Multiple causes of lower extremity swelling after TKA were identified. Blood test indicators can reflect an inflammatory response, suggest poor venous return, and reflect muscle damage and healing progress. Ultrasound scans are needed to identify underlying thrombotic or valvular problems, joint hematomas, and muscle damage. These tests help clinicians and researchers determine the cause of swelling after TKA and take appropriate management.
Subject(s)
Arthroplasty, Replacement, Knee , Humans , Arthroplasty, Replacement, Knee/adverse effects , Delphi Technique , Edema/diagnostic imaging , Edema/etiology , Consensus , Lower ExtremityABSTRACT
Hydrogels have received increasing interest owing to their excellent physicochemical properties and wide applications. In this paper, we report the rapid fabrication of new hydrogels possessing a super water swelling capacity and self-healing ability using a fast, energy-efficient, and convenient method of frontal polymerization (FP). Self-sustained copolymerization of acrylamide (AM), 3-[Dimethyl-[2-(2-methylprop-2-enoyloxy)ethyl]azaniumyl]propane-1-sulfonate (SBMA), and acrylic acid (AA) within 10 min via FP yielded highly transparent and stretchable poly(AM-co-SBMA-co-AA) hydrogels. Thermogravimetric analysis and Fourier transform infrared spectroscopy confirmed the successful fabrication of poly(AM-co-SBMA-co-AA) hydrogels with a single copolymer composition without branched polymers. The effect of monomer ratio on FP features as well as porous morphology, swelling behavior, and self-healing performance of the hydrogels were systematically investigated, showing that the properties of the hydrogels could be tuned by adjusting the chemical composition. The resulting hydrogels were superabsorbent and sensitive to pH, exhibiting a high swelling ratio of up to 11,802% in water and 13,588% in an alkaline environment. The rheological data revealed a stable gel network. These hydrogels also had a favorable self-healing ability with a healing efficiency of up to 95%. This work contributes a simple and efficient method for the rapid preparation of superabsorbent and self-healing hydrogels.
ABSTRACT
Residual yolk is assumed to be an important source of energy and nutrients during early life in nonmammalian amniotes. Available data show that the mean size of residual yolk is far smaller in lizards than in turtles, snakes, crocodiles, and birds, raising a question of whether residual yolk is of functional significance in lizards. Here, we compared data from 26 lizard species with those from other nonmammalian amniotes to test the hypothesis that residual yolk is functionally less significant in species producing more fully developed offspring. In our sample, species mean offspring water contents ranged from 73% to 84% of body wet mass; species mean proportions of carcass dry mass, fat-body dry mass, and residual yolk dry mass to offspring dry mass ranged from 84% to 99%, 0% to 5.0%, and 0% to 14.4%, respectively. Lizards are, on average, more fully developed at hatching or birth than snakes, as revealed by the fact that the mean proportion of carcass dry mass to body dry mass and offspring water contents were both higher in lizards than in snakes. We conclude that the functional significance of residual yolk during early life is generally less evident in lizards. Even in the lizards where residual yolk is of potential functional significance, this portion of yolk contributes little, if any, to postembryonic growth. Future work could usefully collect data across a wider spectrum of reptile taxa to establish a precocial-altricial continuum and test the hypothesis that species with a smaller amount of residual yolk are closer to the precocial end of the continuum.
ABSTRACT
Methods allowing light energy to be modulated in a controllable fashion are potentially important for finding the correlation between light-related environmental factors and aging-related lifespan. Here, we report photo- and thermo-regulation based on photonic crystals (PCs) for extended longevity of C. elegans. We show that PCs can function as a regulator of visible spectrum to tune photonic energy received by C.elegans. We provide direct evidence that lifespan depends on photonic energy, and the use of PCs reflecting blue light (440-537 nm) gives 8.3 % increasement in lifespan. We demonstrate that the exposure to modulated light alleviates photo-oxidative stress and unfolded-protein response. We realize reflective passive cooling temperature using PCs, and favorable low temperature could be created for worms to extend lifespan. This work offers a new path based on PCs to resist negative effects light and temperature for longevity, provides an available platform for studying the role of light in aging.
Subject(s)
Caenorhabditis elegans Proteins , Longevity , Animals , Longevity/physiology , Caenorhabditis elegans/metabolism , Caenorhabditis elegans Proteins/genetics , Caenorhabditis elegans Proteins/metabolism , Aging/physiology , Oxidative Stress/physiologyABSTRACT
Carbon dots (CDs), fluorescent carbon nanoparticles with particle sizes < 10 nm, are constantly being developed for potential large-scale applications. Recently, methods allow CD synthesis to be carried out on large-scale preparation in a controlled fashion are potentially important for multiple disciplines, including bottom-up strategy, top-down method. In this review, the recent progresses in the research of the methods for large-scale production of CDs and their functionalization are summarized. Especially, the methods of CD synthesis, such as large-scale preparation, hydrothermal/solvothermal, microwave-assisted, magnetic hyperthermia microfluidic and other methods, along with functionalization of CDs, are summarized in detail. By promising applications of CDs, there are three aspects have been already reported, such as enhancing mechanical properties, flame retardancy, and energy storage. Also, future development of CDs is prospected.
ABSTRACT
Carbon dots (CDs) have been extensively explored to show good optical features, low toxicity, and good biocompatibility. Herein, we report the new synthesis of forsythia-derived CDs (F-CDs) and their incorporation into Nylon-11 nanofibers for improved mechanical properties and biocompatibility. F-CDs are prepared from a Chinese herb forsythia via a magnetic hyperthermia method in 90 s without the use of any organic solvents. The as-prepared F-CDs with rich surface functional groups can be well embedded into Nylon-11 nanofibers via electrospinning, providing Nylon-11/F-CD nanofiber mats with remarkably enhanced mechanical properties. With the incorporation of F-CDs at 10 wt% into the Nylon-11 nanofiber mats, the tensile strength increases from 7.5 to 16.6 MPa, and the elongation ratio at break increases from 39% to 125%. Moreover, the Nylon-11/F-CD nanofiber mats exhibit excellent cytocompatibility towards L929 fibroblast cells with cell viability of 96%. These findings may guide the development of various CD-embedded nanofiber mats with good mechanical properties and biocompatibility potentially useful for biomedical applications, such as tissue engineering scaffolds or wound dressing.
ABSTRACT
The pH value in the wound milieu plays a key role in cellular processes and cell cycle processes involved in the process of wound healing. Here, a microfluidic assembly technique is employed to fabricate micro-gel ensembles that can precisely tune the pH value of wound surface and accelerate wound healing. The micro-gel ensembles consist of poly (hydroxypropyl acrylate-co-acrylic acid)-magnesium ions (poly-(HPA-co-AA)-Mg2+ ) gel and carboxymethyl chitosan (CMCS) gel, which can release and absorb hydrogen ion (H+ ) separately at different stages of healing in response to the evolution of wound microenvironment. By regulating the wound pH to affect the proliferation and migration of cell on the wound and the activity of various biological factors in the wound, the physiological processes are greatly facilitated which results in much accelerated healing of chronic wound. This work presents an effective strategy in designing wound healing materials with vast potentials for chronic wound management.
Subject(s)
Hydrogels , Wound Healing , Hydrogen-Ion Concentration , Wound Healing/physiologyABSTRACT
The overuse of veterinary drugs and veterinary drug residues is increasingly becoming an obstacle to sustainable development worldwide. It is therefore imperative to establish a quantitative, sensitive and efficient method for the detection of veterinary drugs. Herein, we developed a visual microfluidic detection platform for rapid and sensitive detection of veterinary drugs using CdTe quantum dots (QDs) with three different ligands as the sensing units. Green-emissive 3-mercaptopropionic acid (MPA)-CdTe QDs, yellow-emissive thioglycolic acid (TGA)-CdTe QDs and orange-emissive N-acetyl-l-cysteine (NAC)-CdTe QDs were synthesized by a sulfhydryl aqueous phase method. These CdTe QDs show selective rapid fluorescence response to pefloxacin (PEF), malachite green (MG), and 1-aminohydantoin hydrochloride (AHD). With the concentration of veterinary drugs increasing, the CdTe QDs reveals a fluorescence color variation from bright to dark until quenched and the response degree of CdTe QDs with different ligands to veterinary drugs is different. Specifically, the limits of detection (LODs) of MPA-CdTe, TGA-CdTe and NAC-CdTe QDs probes for PEF were 7.57 µM, 1.75 µM and 2.90 µM, respectively, and the response was complete in a few seconds, realizing the sensitive and rapid detection of PEF. The three kinds of CdTe QDs could also be used in the detection of other veterinary drugs such as MG and AHD. Finally, a microfluidic detection platform was constructed for visual sensing and rapid detection towards veterinary drugs. The sensor platform holds the advantages of simple operation, low cost, rapid sensing and good sensitivity, and is potentially useful for visual quantitative detection of veterinary drug residues in aquatic products and the environment.
ABSTRACT
Nano-/micro-reactors have emerged as a powerful platform for chemical synthesis. Here, we develop fiber-spinning chemistry (FSC) based on a microfluidic blow spinning (MBS) technique, allowing the availability of nanoreactors for chemical synthesis with scale-up capacities. Proof-of-concept experiments focus on the utilization of MBS-derived fibrous nanoreactors for large-scale production of ligand-free perovskite quantum dots (PQDs) in one step. Typically, methylammonium lead halide (MAPbX3 , X=Cl, Br, and I) PQDs in situ synthesized at large scale inside polyacrylonitrile (PAN) nanofiber films (size 120â cm ×30â cm per hour), exhibit high photoluminescence (PL) quantum yield (QY) of 71 %, tunable emissive peaks (448-600â nm), and superb PL stability. The PQDs/polymer nanofiber films are potentially useful for CO2 conversion, wide-color-gamut displays and light-emitting diode (LED) devices. These findings may guide the development of nano-/micro-reactor technology for scale-up production of nanomaterials with various potential applications.
ABSTRACT
From the perspective of both fundamental and applied science, it is extremely advisable to develop a facile and feasible strategy for fabricating gels with defined structures. Herein, the authors report the rapid synthesis of patterned gels by conducting frontal polymerization (FP) at millimeter-scale (2 mm), where a series of microchannels, including linear-, parallel-, divergent-, snakelike-, circular- and concentric circular channels, were used. They have investigated the effect of various factors (monomer mass ratio, channel size, initiator concentration, and solvent content) on FP at millimeter-scale, along with the propagating rule of the front during FP in these microchannels. In addition, we developed a new microfluidic-assisted FP (MFP) strategy by combining the FP and microfluidic technique. Interestingly, the MFP can realize the production of hollow-structured gel in a rapid and continuous fashion, which have never been reported. Our work not only offers an effective pathway towards patterned gels by the microchannel-conformal FP, but also gives new insight into the continuous production of hollow-structured materials. Such a method will be beneficial for fabricating vessel and scaffold materials in a flexible, easy-to-perform, time and energy saving way.
Subject(s)
Microfluidics , Gels , Polymerization , SolventsABSTRACT
Carbon quantum dots (CDs) have inspired vast interest because of their excellent photoluminescence (PL) performances and their promising applications in optoelectronic, biomedical, and sensing fields. The development of effective approaches for the large-scale production of CDs may greatly promote the further advancement of their practical applications. In this Minireview, the newly emerging methods for the large-scale production of CDs are summarized, such as microwave, ultrasonic, plasma, magnetic hyperthermia, and microfluidic techniques. The use of the available strategies for constructing CD/polymer composites with intriguing solid-state PL is then described. Particularly, the multiple roles of CDs are emphasized, including as fillers, monomers, and initiators. Moreover, typical applications of CD/polymer composites in light-emitting diodes, fluorescent printing, and biomedicine are outlined. Finally, we discuss current problems and speculate on their future development.
ABSTRACT
Given that many people suffer from large-area skin damage, skin regeneration is a matter of high concern. Here, an available method is developed for the formation of large-area robust skins through three stages: fabrication of a biodegradable sealant-loaded nanofiber scaffold (SNS), skin tissue reconstruction, and skin regeneration. First, a microfluidic blow-spinning strategy is proposed to fabricate a large-scale nanofiber scaffold with an area of 140 cm × 40 cm, composed of fibrinogen-loaded polycaprolactone/silk fibroin (PCL/SF) ultrafine core-shell nanofibers with mean diameter of 65 nm. Then, the SNS forms, where the gelling reaction of fibrin sealant occurs in situ between thrombin and fibrinogen on PCL/SF nanofiber surface, to promote the migration and proliferation of fibroblasts, accelerating skin regeneration. Through an in vivo study, it is shown that the SNS can rapidly repair acute tissue damage such as vascular bleeding and hepatic hemorrhage, and also promote angiogenesis, large-area abdominal wall defect repair, and wound tissue regeneration for medical problems in the world. Besides, it avoids the risk of immune rejection and secondary surgery in clinical applications. This strategy offers a facile route to regenerate large-scale robust skin, which shows great potential in abdominal wall defect repair.
Subject(s)
Biocompatible Materials/chemistry , Biocompatible Materials/pharmacology , Lab-On-A-Chip Devices , Nanofibers , Skin, Artificial , Tissue Engineering/instrumentation , Tissue Scaffolds/chemistry , Animals , Cell Proliferation/drug effects , Fibroblasts/cytology , Fibroblasts/drug effects , Humans , MiceABSTRACT
Aseptic loosening caused by wear particles is one of the common complications after total hip arthroplasty. We investigated the effect of the recombinant protein ephB4-Fc (erythropoietin-producing human hepatocellular receptor 4) on wear particle-mediated inflammatory response. In vitro, ephrinB2 expression was analyzed using siRNA-NFATc1 (nuclear factor of activated T-cells 1) and siRNA-c-Fos. Additionally, we used Tartrate-resistant acid phosphatase (TRAP) staining, bone pit resorption, Enzyme-linked immunosorbent assay (ELISA), as well as ephrinB2 overexpression and knockdown experiments to verify the effect of ephB4-Fc on osteoclast differentiation and function. In vivo, a mouse skull model was constructed to test whether the ephB4-Fc inhibits osteolysis and inhibits inflammation by micro-CT, H&E staining, immunohistochemistry, and immunofluorescence. The gene expression of ephrinB2 was regulated by c-Fos/NFATc1. Titanium wear particles activated this signaling pathway to the promoted expression of the ephrinB2 gene. However, ephrinB2 protein can be activated by osteoblast membrane receptor ephB4 to inhibit osteoclast differentiation. In in vivo experiments, we found that ephB4 could regulate Ti particle-mediated imbalance of OPG/RANKL, and the most important finding was that ephB4 relieved the release of proinflammatory factors. The ephB4-Fc inhibits wear particle-mediated osteolysis and inflammatory response through the ephrinB2/EphB4 bidirectional signaling pathway, and ephrinB2 ligand is expected to become a new clinical drug therapeutic target.
Subject(s)
Ephrin-B2/metabolism , Inflammation Mediators/metabolism , Osteoprotegerin/metabolism , RANK Ligand/metabolism , Receptor, EphB4/pharmacology , Recombinant Proteins/pharmacology , Signal Transduction , Titanium/pharmacology , Actins/metabolism , Animals , Bone Resorption/pathology , Cell Differentiation/drug effects , Female , Humans , Interleukin-1beta/metabolism , Interleukin-6/metabolism , Mice, Inbred C57BL , NFATC Transcription Factors/metabolism , Osteoblasts/drug effects , Osteoblasts/metabolism , Osteoclasts/drug effects , Osteoclasts/metabolism , Osteogenesis/drug effects , Osteolysis/pathology , Proto-Oncogene Proteins c-fos/metabolism , Tumor Necrosis Factor-alpha/metabolismABSTRACT
Recently, widespread attention has been paid to red emissive carbon dots (CDs) which have desirable optical properties, low toxicity, and biocompatibility. Despite great efforts, the facile preparation of red dual-emissive CDs useful for ratiometric detection and bioimaging remains challenging. Here, we report a facile synthesis of red dual-emissive CDs and their potential for ratiometric fluorescence sensing and cellular imaging. Derived from the hydrothermal treatment of dicyandiamide and o-phenylenediamine in dilute sulfuric acid, the CDs are surface-tailored with nitrogen-, oxygen-, and sulfur-containing functional groups. The as-prepared CDs show various good features, including good water solubility, biocompatibility, excitation-independent dual-emission with two photoluminescence (PL) peaks centered at 630 and 680 nm, and an absolute quantum yield (QY) of 30.2% in water. The CDs exhibit a selective, sensitive, rapid, and stable ratiometric fluorescence response toward methyl blue, giving a linear relationship in the range of 0.5-300 µM with a correlation coefficient (R2) of 0.997. We also study ratiometric fluorescence sensing for the accurate detection of pH. Moreover, the CDs possess good cellular imaging ability, indicating their promising applicability for biomedical applications. These results pave a way toward the fabrication of red dual-emissive carbon-based nanomaterials useful for both ratiometric sensing and bioimaging.