Investigation of Rapid Emergence of Colistin Resistance in a Newborn Infected with KPC2-Producing Hypervirulent Carbapenem-Resistant Klebsiella pneumoniae.

OBJECTIVES: Hypervirulent carbapenem-resistant Klebsiella pneumoniae (hv-CRKp) poses a significant threat to public health. This study reports an infection related to hv-CRKp in a premature infant and reveals its colistin resistance and evolutionary mechanisms within the host. METHODS: Three KPC-producing CRKp strains were isolated from a patient with sepsis and CRKp osteoarthritis who had been receiving colistin antimicrobial therapy. The minimum inhibitory concentrations (MICs) of Ceftazidime,Ceftazidime-Avibactam(CAZ-AVI),Meropenem,Imipenem,Tigecycline,Amikacin,Minocycline,Sulfamethoxazole/Trimethoprim,Ciprofloxacin,Levofloxacin,Aztreonam,Cefepime,Cefoperazone/Sulbactam,Piperacillin/Tazobactam and colistin were determined using the microbroth dilution method.The whole-genome sequencing analysis was conducted to determine the STs, virulence genes, and antibiotic resistance genes of three CRKp strains. RESULTS: Whole-genome sequencing revealed that all three CRKp strains belonged to the sequence type (ST) 11 clone and carried a plasmid encoding blaKPC-2. The three strains all possessed the iucABCDiutA virulence cluster, peg-344 gene, and rmpA/rmpA2 genes, defining them as hv-CRKp. Further experiments and whole-genome analysis revealed that a strain of Kp has developed resistance to colistin. The mechanism found to be responsible for the colistin resistance was a deletion mutation of approximately 9000 bp including mgrB gene. CONCLUSION: This study characterizes the colistin resistance of ST11 clone hv-CRKp during colistin treatment and its rapid evolution within the host.

Attack on optical cryptosystems by skip connection networks.

Optical encryption methods, due to their efficient operation speed and parallel processing capabilities, hold significant importance in securing multidimensional and large-volume data. Enhancing the security of optical cryptosystems from the perspective of cryptanalysis holds significant importance currently. Presently, attack methods against optical encryption are complex, and the effectiveness of these attacks is insufficient. Security analysis solutions face limitations in both breadth and depth. Therefore, this paper proposes an attack on optical cryptosystems based on a skip connection network, demonstrating the susceptibility of optical cryptosystems to attacks based on neural network algorithms. The network model is trained on plaintext-ciphertext pairs, fitting equivalent keys without various additional conditions. It approximates plaintext information in high-dimensional space, directly obtaining corresponding plaintext through ciphertext information, expanding the applicability and enhancing the effectiveness of the attack scheme. Finally, the feasibility and effectiveness of the attack scheme were verified through computer simulations. The experiments indicate that the method proposed in this paper has low computational complexity, wide applicability, produces high-quality decrypted images, and high decipherment accuracy. This provides a universal approach for analyzing the security of various optical cryptosystems from the perspective of chosen plaintext attacks.

Mass Transfer Limitation within Molecular Crowding Electrolyte Reorienting (100) and (101) Texture for Dendrite-Free Zinc Metal Batteries.

Aqueous zinc metal batteries are emerging as a promising alternative for energy storage due to their high safety and low cost. However, their development is hindered by the formation of Zn dendrites and side reactions. Herein, a macromolecular crowding electrolyte (MCE40) is prepared by incorporating polyvinylpyrrolidone (PVP) into the aqueous solutions, exhibiting an enlarged electrochemical stability window and anti-freezing properties. Notably, through electrochemical measurements and characterizations, it is discovered that the mass transfer limitation near the electrode surface within the MCE40 electrolyte inhibits the (002) facets. This leads to the crystallographic reorientation of Zn deposition to expose the (100) and (101) textures, which undergo a "nucleation-merge-growth" process to form a uniform and compact Zn deposition. Consequently, the MCE40 enables highly reversible and stable Zn plating/stripping in Zn/Cu half cells over 600 cycles and in Zn/Zn symmetric cells for over 3000 hours at 1 mA cm-2. Furthermore, Na0.33V2O5/Zn and MnO2/Zn full cells display promising capacity and sustained stability over 500 cycles at room and sub-zero temperatures. This study highlights a novel electrochemical mechanism for achieving preferential Zn deposition, introducing a unique strategy for fabricating dendrite-free zinc metal batteries.

Tungsten phosphide on nitrogen and phosphorus-doped carbon as a functional membrane coating enabling robust lithium-sulfur batteries.

Lithium-sulfur batteries (LSBs) hold great potential as future energy storage technology, but their widespread application is hampered by the slow polysulfide conversion kinetics and the sulfur loss during cycling. In this study, we detail a one-step approach to growing tungsten phosphide (WP) nanoparticles on the surface of nitrogen and phosphorus co-doped carbon nanosheets (WP@NPC). We further demonstrate that this material provides outstanding performance as a multifunctional separator in LSBs, enabling higher sulfur utilization and exceptional rate performance. These excellent properties are associated with the abundance of lithium polysulfide (LiPS) adsorption and catalytic conversion sites and rapid ion transport capabilities. Experimental data and density functional theory calculations demonstrate tungsten to have a sulfophilic character while nitrogen and phosphorus provide lithiophilic sites that prevent the loss of LiPSs. Furthermore, WP regulates the LiPS catalytic conversion, accelerating the Li-S redox kinetics. As a result, LSBs containing a polypropylene separator coated with a WP@NPC layer show capacities close to 1500 mAh/g at 0.1C and coulombic efficiencies above 99.5 % at 3C. Batteries with high sulfur loading, 4.9 mg cm-2, are further produced to validate their superior cycling stability. Overall, this work demonstrates the use of multifunctional separators as an effective strategy to promote LSB performance.

Electrical Characterization and Analysis of Single Cells and Related Applications.

Biological parameters extracted from electrical signals from various body parts have been used for many years to analyze the human body and its behavior. In addition, electrical signals from cancer cell lines, normal cells, and viruses, among others, have been widely used for the detection of various diseases. Single-cell parameters such as cell and cytoplasmic conductivity, relaxation frequency, and membrane capacitance are important. There are many techniques available to characterize biomaterials, such as nanotechnology, microstrip cavity resonance measurement, etc. This article reviews single-cell isolation and sorting techniques, such as the micropipette separation method, separation and sorting system (dual electrophoretic array system), DEPArray sorting system (dielectrophoretic array system), cell selector sorting system, and microfluidic and valve devices, and discusses their respective advantages and disadvantages. Furthermore, it summarizes common single-cell electrical manipulations, such as single-cell amperometry (SCA), electrical impedance sensing (EIS), impedance flow cytometry (IFC), cell-based electrical impedance (CEI), microelectromechanical systems (MEMS), and integrated microelectrode array (IMA). The article also enumerates the application and significance of single-cell electrochemical analysis from the perspectives of CTC liquid biopsy, recombinant adenovirus, tumor cells like lung cancer DTCs (LC-DTCs), and single-cell metabolomics analysis. The paper concludes with a discussion of the current limitations faced by single-cell analysis techniques along with future directions and potential application scenarios.

Enabling High-Performance All-Solid-State Batteries via Guest Wrench in Zeolite Strategy.

All-solid-state batteries with a high energy density and safety are desirable candidates for next-generation energy storage applications. However, conventional solid electrolytes for all-solid-state batteries encounter limitations such as poor ionic conduction, interfacial compatibility, instability, and high cost. Herein, taking advantage of the ingenious capability of zeolite to incorporate functional guests in its void space, we present an innovative ionic activation strategy based on the "guest wrench" mechanism, by introducing a pair of cation and anion of LiTFSI-based guest species (GS) into the supercage of the LiX zeolite, to fabricate a zeolite membrane (ZM)-based solid electrolyte (GS-ZM) with high Li ionic conduction and interfacial compatibility. The restriction of zeolite frameworks toward the framework-associated Li ions is significantly reduced through the dynamic coordination of Li ions with the "oxygen wrench" of TFSI- at room temperature as shown by experiments and Car-Parrinello molecular dynamics simulations. Consequently, the GS-ZM shows an ∼100% increase in ionic conductivity compared with ZM and an outstanding Li+ transference number of 0.97. Remarkably, leveraging the superior ionic conduction of GS-ZM with the favorable interface structure between GS-ZM and electrodes, the assembled all-solid-state Li-ion and Li-air batteries based on GS-ZM exhibit the best-level electrochemical performance much superior to batteries based on liquid electrolytes: a capacity retention of 99.3% after 800 cycles at 1 C for all-solid-state Li-ion batteries and a cycle life of 909 cycles at 500 mA g-1 for all-solid-state Li-air batteries. The mechanistic discovery of a "guest wrench" in zeolite will significantly enhance the adaptability of zeolite-based electrolytes in a variety of all-solid-state energy storage systems with high performance, high safety, and low cost.

Electrolytes with Solvating Inner Sheath Engineering for Practical Na-S Batteries.

Sodium-sulfur (Na-S) batteries with durable Na-metal stability, shuttle-free cyclability, and long lifespan are promising to large-scale energy storages. However, meeting these stringent requirements poses huge challenges with the existing electrolytes. Herein, a localized saturated electrolyte (LSE) is proposed with 2-methyltetrahydrofuran (MeTHF) as an inner sheath solvent, which represents a new category of electrolyte for Na-S system. Unlike the traditional high concentration electrolytes, the LSE is realized with a low salt-to-solvent ratio and low diluent-to-solvent ratio, which pushes the limit of localized high concentration electrolyte (LHCE). The appropriate molecular structure and solvation ability of MeTHF regulate a saturated inner sheath, which features a reinforced coordination of Na+ to anions, enlarged Na+ -solvent distance, and weakened anion-diluent interaction. Such electrolyte configuration is found to be the key to build a sustainable interphase and a quasi-solid-solid sulfur redox process, making a dendrite-inhibited and shuttle-free Na-S battery possible. With this electrolyte, pouch cells with decent cycling performance under rather demanding conditions are demonstrated.

Three-Component Donor-π-Acceptor Covalent-Organic Frameworks for Boosting Photocatalytic Hydrogen Evolution.

Two-dimensional covalent-organic frameworks (2D COFs) have recently emerged as great prospects for their applications as new photocatalytic platforms in solar-to-hydrogen conversion; nevertheless, their inefficient solar energy capture and fast charge recombination hinder the improvement of photocatalytic hydrogen production performance. Herein, two photoactive three-component donor-π-acceptor (TCDA) materials were constructed using a multicomponent synthesis strategy by introducing electron-deficient triazine and electron-rich benzotrithiophene moieties into frameworks through sp2 carbon and imine linkages, respectively. Compared with two-component COFs, the novel TCDA-COFs are more convenient in regulating the inherent photophysical properties, thereby realizing outstanding photocatalytic activity for hydrogen evolution from water. Remarkably, the first sp2 carbon-linked TCDA-COF displays an impressive hydrogen evolution rate of 70.8 ± 1.9 mmol g-1 h-1 with excellent reusability in the presence of 1 wt % Pt under visible-light illumination (420-780 nm). Utilizing the combination of diversified spectroscopy and theoretical prediction, we show that the full π-conjugated linkage not only effectively broadens the visible-light harvesting of COFs but also enhances charge transfer and separation efficiency.

Functional stability correlates with dynamic microbial networks in anammox process.

Understanding the relationship between dynamic microbial networks and functional stability is critical for the stable operation of anammox systems. Here, by operating an anammox reactor under constant condition over 250 days, it was found that the relative abundance of Planctomycetota gradually decreased while Chloroflexi and Proteobacteria increased, with stochasticity predominating the bacterial assembly as the reactor operation. Network analysis revealed a successional dynamic pattern of microbial interaction despite stable performance. The variation of subnetworks indicated Chloroflexi and Proteobacteria alternately played important role in anammox microbial network, and the negative relationship between anammox bacteria and heterotrophs could achieve a balance to keep functional stability under long-term operation. Furthermore, the identified keystone species mainly belonged to heterotrophs that were critical in maintaining network structure and system function. The results of this study revealed clear changing patterns of microbial community and network succession, which could provide valuable reference for other stably operated bioreactors.

Iridium single atoms incorporated in Co3O4 efficiently catalyze the oxygen evolution in acidic conditions.

Designing active and stable electrocatalysts with economic efficiency for acidic oxygen evolution reaction is essential for developing proton exchange membrane water electrolyzers. Herein, we report on a cobalt oxide incorporated with iridium single atoms (Ir-Co3O4), prepared by a mechanochemical approach. Operando X-ray absorption spectroscopy reveals that Ir atoms are partially oxidized to active Ir>4+ during the reaction, meanwhile Ir and Co atoms with their bridged electrophilic O ligands acting as active sites, are jointly responsible for the enhanced performance. Theoretical calculations further disclose the isolated Ir atoms can effectively boost the electronic conductivity and optimize the energy barrier. As a result, Ir-Co3O4 exhibits significantly higher mass activity and turnover frequency than those of benchmark IrO2 in acidic conditions. Moreover, the catalyst preparation can be easily scaled up to gram-level per batch. The present approach highlights the concept of constructing single noble metal atoms incorporated cost-effective metal oxides catalysts for practical applications.

Phase Engineering of Defective Copper Selenide toward Robust Lithium-Sulfur Batteries.

The shuttling of soluble lithium polysulfides (LiPS) and the sluggish Li-S conversion kinetics are two main barriers toward the practical application of lithium-sulfur batteries (LSBs). Herein, we propose the addition of copper selenide nanoparticles at the cathode to trap LiPS and accelerate the Li-S reaction kinetics. Using both computational and experimental results, we demonstrate the crystal phase and concentration of copper vacancies to control the electronic structure of the copper selenide, its affinity toward LiPS chemisorption, and its electrical conductivity. The adjustment of the defect density also allows for tuning the electrochemically active sites for the catalytic conversion of polysulfide. The optimized S/Cu1.8Se cathode efficiently promotes and stabilizes the sulfur electrochemistry, thus improving significantly the LSB performance, including an outstanding cyclability over 1000 cycles at 3 C with a capacity fading rate of just 0.029% per cycle, a superb rate capability up to 5 C, and a high areal capacity of 6.07 mAh cm-2 under high sulfur loading. Overall, the present work proposes a crystal phase and defect engineering strategy toward fast and durable sulfur electrochemistry, demonstrating great potential in developing practical LSBs.

Interfacial electronic structure engineering on molybdenum sulfide for robust dual-pH hydrogen evolution.

Molybdenum disulfide, as an electronic highly-adjustable catalysts material, tuning its electronic structure is crucial to enhance its intrinsic hydrogen evolution reaction (HER) activity. Nevertheless, there are yet huge challenges to the understanding and regulation of the surface electronic structure of molybdenum disulfide-based catalysts. Here we address these challenges by tuning its electronic structure of phase modulation synergistic with interfacial chemistry and defects from phosphorus or sulfur implantation, and we then successfully design and synthesize electrocatalysts with the multi-heterojunction interfaces (e.g., 1T0.81-MoS2@Ni2P), demonstrating superior HER activities and good stabilities with a small overpotentials of 38.9 and 95 mV at 10 mA/cm2, a low Tafel slopes of 41 and 42 mV/dec in acidic as well as alkaline surroundings, outperforming commercial Pt/C catalyst and other reported Mo-based catalysts. Theoretical calculation verified that the incorporation of metallic-phase and intrinsic HER-active Ni-based materials into molybdenum disulfide could effectively regulate its electronic structure for making the bandgap narrower. Additionally, X-ray absorption spectroscopy indicate that reduced nickel possesses empty orbitals, which is helpful for additional H binding ability. All these factors can decrease Mo-H bond strength, greatly improving the HER catalytic activity of these materials.

Perovskite Quantum Dots Encapsulated in a Mesoporous Metal-Organic Framework as Synergistic Photocathode Materials.

Metal halide perovskite quantum dots, with high light-absorption coefficients and tunable electronic properties, have been widely studied as optoelectronic materials, but their applications in photocatalysis are hindered by their insufficient stability because of the oxidation and agglomeration under light, heat, and atmospheric conditions. To address this challenge, herein, we encapsulated CsPbBr3 nanocrystals into a stable iron-based metal-organic framework (MOF) with mesoporous cages (∼5.5 and 4.2 nm) via a sequential deposition route to obtain a perovskite-MOF composite material, CsPbBr3@PCN-333(Fe), in which CsPbBr3 nanocrystals were stabilized from aggregation or leaching by the confinement effect of MOF cages. The monodispersed CsPbBr3 nanocrystals (4-5 nm) within the MOF lattice were directly observed by transmission electron microscopy and corresponding mapping analysis and further confirmed by powder X-ray diffraction, infrared spectroscopy, and N2 adsorption characterizations. Density functional theory calculations further suggested a significant interfacial charge transfer from CsPbBr3 quantum dots to PCN-333(Fe), which is ideal for photocatalysis. The CsPbBr3@PCN-333(Fe) composite exhibited excellent and stable oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) catalytic activities in aprotic systems. Furthermore, CsPbBr3@PCN-333(Fe) composite worked as the synergistic photocathode in the photoassisted Li-O2 battery, where CsPbBr3 and PCN-333(Fe) acted as optical antennas and ORR/OER catalytic sites, respectively. The CsPbBr3@PCN-333(Fe) photocathode showed lower overpotential and better cycling stability compared to CsPbBr3 nanocrystals or PCN-333(Fe), highlighting the synergy between CsPbBr3 and PCN-333(Fe) in the composite.

Isolated copper single sites for high-performance electroreduction of carbon monoxide to multicarbon products.

Electrochemical carbon monoxide reduction is a promising strategy for the production of value-added multicarbon compounds, albeit yielding diverse products with low selectivities and Faradaic efficiencies. Here, copper single atoms anchored to Ti3C2Tx MXene nanosheets are firstly demonstrated as effective and robust catalysts for electrochemical carbon monoxide reduction, achieving an ultrahigh selectivity of 98% for the formation of multicarbon products. Particularly, it exhibits a high Faradaic efficiency of 71% towards ethylene at -0.7 V versus the reversible hydrogen electrode, superior to the previously reported copper-based catalysts. Besides, it shows a stable activity during the 68-h electrolysis. Theoretical simulations reveal that atomically dispersed Cu-O3 sites favor the C-C coupling of carbon monoxide molecules to generate the key *CO-CHO species, and then induce the decreased free energy barrier of the potential-determining step, thus accounting for the high activity and selectivity of copper single atoms for carbon monoxide reduction.

Estimation of the spatial distribution of Frenkel defects in NiFe2O4 by simulation of HAADF-STEM images.

Accurate determination of the atomic spatial configuration of Frenkel defects is important for understanding the mechanism and fully utilizing these defects to optimize the material properties. In this study, aberration-corrected scanning transmission electron microscopy (STEM) was used to identify the Fe vacancies and Fe Frenkel defect pairs, which have not been previously investigated, in NiFe2O4 (NFO). The spatial distribution of these point defects is determined by comparing the experimental and simulated images, where the experimental image intensities are consistent with the calculated image intensities. We confirmed the stabilities of the observed point defect configurations and calculated their electronic structures using density functional theory. A comprehensive understanding of the relationship between the Frenkel defect spatial configurations and electronic properties is obtained, which provides an alternative method to regulate the NFO performance.

Photo-mediated synthesis of halogenated spiro[4,5]trienones of N-aryl alkynamides with PhI(OCOCF3)2 and KBr/KCl.

A novel and convenient photo-mediated halogenated spirocyclization of N-(p-methoxyaryl)propiolamides has been developed. The photolysis of phenyliodine bis(trifluoroacetate) (PIFA) as an iodination reagent led to iodinated ipso-cyclization under the irradiation of a xenon lamp, while brominated ipso-cyclization or chlorinated ipso-cyclization was achieved by irradiating a mixture of PIFA and KBr/KCl under a blue LED. The present protocol simply utilizes light as the safe and clean energy source and doesn't require any external photocatalyst providing various 3-halospiro[4,5]trienones in good to excellent yields (up to 93%).

Synergistic Doping and Intercalation: Realizing Deep Phase Modulation on MoS2 Arrays for High-Efficiency Hydrogen Evolution Reaction.

A synergistic N doping plus PO4 3- intercalation strategy is used to induce high conversion (ca. 41 %) of 2H-MoS2 into 1T-MoS2 , which is much higher than single N doping (ca. 28 %) or single PO4 3- intercalation (ca. 10 %). A scattering mechanism is proposed to illustrate the synergistic phase transformation from the 2H to the 1T phase, which was confirmed by synchrotron radiation and spherical aberration TEM. To further enhance reaction kinetics, the designed (N,PO4 3- )-MoS2 nanosheets are combined with conductive vertical graphene (VG) skeleton forming binder-free arrays for high-efficiency hydrogen evolution reaction (HER). Owing to the decreased band gap, lower d-band center, and smaller hydrogen adsorption/desorption energy, the designed (N,PO4 3- )-MoS2 /VG electrode shows excellent HER performance with a lower Tafel slope and overpotential than N-MoS2 /VG, PO4 3- -MoS2 /VG counterparts, and other Mo-base catalysts in the literature.