ABSTRACT
In this work, a self-healable, high-stability anode material for rechargeable magnesium batteries (RMBs) has been developed by introducing a core-shell structure of Ga confined by reduced graphene oxide (Ga@rGO). Via this Ga@rGO anode, a specific capacity of 150 mAh g-1 at a current of 0.5 A g-1 stable up to 1200 cycles at room temperature and a specific capacity of 100 mAh g-1 under an ultrahigh current of 1 A g-1 stable up to 700 cycles at a slightly elevated temperature of 40 °C have been achieved. Additionally, the ultrahigh rate, high-cycling stability, and long-cycle life of the anode are attributed to the stabilized structure; such a low-cost, simple, and environmentally friendly direct drop coating (DDC) method is developed to maximize the original state of the active materials. Remarkably, the self-healing ability of anodes is still presented under the ultrahigh charging current. This anode is promising for the development of high rate and high stability RMBs.
ABSTRACT
MXene based catalysts can significantly enhance hydrogenation and dehydrogenation (de/hydrogenation) kinetics of Mg/MgH2, but they suffer from uncontrollable catalysts-hydrogen bond strength and structural instability. Here, we propose Tx density control of MXene-based catalysts and MnOx coating as a promising solution. The MnOx@Ti2CTx-catalyzed Mg/MgH2 can release 5.97 wt % H2 at 300 °C in 3 min and 5.60 wt % H2 at 240 °C in 15 min with an activation energy of 75.57 kJ·mol-1. In addition, the samples showed excellent de/hydrogenation-cycle stability, and the degradation of hydrogen storage capacity is negligible even after 100 cycles. DFT calculations combined with XPS analysis showed that the Tx defect on the surface of the MnOx@Ti2CTx catalyst could optimize the strength of the Ti-H bond, accelerating both hydrogen dissociation and diffusion processes. The catalyst's surface properties were protected by the MnOx coating, achieving high chemical and catalytic stability. These findings offer a strategy for surface structure optimization and protection of MXene-based catalysts, realizing controllable catalyst-hydrogen bond strength.
ABSTRACT
OBJECTIVE: The impact of comprehensive risk factor control on heart failure (HF) risk and HF-free survival time in individuals with type 2 diabetes (T2D) was evaluated in this study. RESEARCH DESIGN AND METHODS: This prospective study included 11,949 individuals diagnosed with T2D, matched with 47,796 non-T2D control study participants from the UK Biobank cohort. The degree of comprehensive risk factor control was assessed on the basis of the major cardiovascular risk factors, including blood pressure, BMI, LDL cholesterol, hemoglobin A1c, renal function, smoking, diet, and physical activity. Cox proportional hazards models were used to measure the associations between the degree of risk factor control and HF risk. Irwin's restricted mean was used to evaluate HF-free survival time. RESULTS: During a median follow-up of 12.3 years, 702 individuals (5.87%) with T2D and 1,402 matched control participants (2.93%) developed HF. Each additional risk factor controlled was associated with an average 19% lower risk of HF. Optimal control of at least six risk factors was associated with a 67% lower HF risk (hazard ratio [HR] 0.33; 95% CI 0.20, 0.54). BMI was the primary attributable risk factor for HF. Notably, the excess risk of HF associated with T2D could be attenuated to levels comparable to those of non-T2D control participants when individuals had a high degree of risk factor control (HR 0.66; 95% CI 0.40, 1.07), and they exhibited a longer HF-free survival time. CONCLUSIONS: Comprehensive management of risk factors is inversely associated with HF risk, and optimal risk factor control may prolong HF-free survival time among individuals with T2D.
ABSTRACT
The electrochemical properties of TiB4 and TiB5 monolayers in Na-ion batteries (NIBs) were studied by using the first-principles calculation method based on density functional theory. The TiB4/TiB5 monolayer showed excellent Na storage capacity, capable of adsorbing two layers of Na with theoretical capacities of 1176.77 and 1052.05 mA g-1, respectively. The average operating voltages of the TiB4 and TiB5 monolayers are 0.073 and 0.042 eV, respectively, indicating that they can be used as anode materials for NIBs. More interestingly, the exposed B surface not only brings a high theoretical capacity but also provides a relatively small diffusion barrier of 0.16 (for TiB4) and 0.33 eV (for TiB5), enhancing their rate capability in NIBs.
ABSTRACT
Pentachlorophenol (PCP) was once used as a pesticide, germicide, and preservative due to its stable properties and resistance to degradation. This study aimed to design a biosensor for the quantitative and prompt detection of capable of PCP. A cell-free fluorescence biosensor was developed while employing NalC, an allosteric Transcription Factor responsive to PCP and In Vitro Transcription. By adding a DNA template and PCP and employing Electrophoretic Mobility Shift Assay while monitoring the dynamic fluorescence changes in RNA, this study offers evidence of NalC's potential applicability in sensor systems developed for the specific detection of PCP. The biosensor showed the capability for the quantitative detection of PCP, with a Limit of Detection (LOD) of 0.21 µM. Following the addition of Nucleic Acid Sequence-Based Amplification, the fluorescence intensity of RNA revealed an excellent linear relationship with the concentration of PCP, showing a correlation coefficient (R2) of 0.9595. The final LOD was determined to be 0.002 µM. This study has successfully translated the determination of PCP into a fluorescent RNA output, thereby presenting a novel approach for detecting PCP within environmental settings.
ABSTRACT
BACKGROUND: Ideal cardiovascular health (CVH) has been associated with reduced cardiovascular disease risk and mortality, but its association with cardiac arrhythmias was still unsettled. In this prospective cohort study, we investigated the relationship between CVH and subsequent arrhythmias risk, including atrial fibrillation (AF)/flutter, ventricular arrhythmias, and bradyarrhythmias. METHODS: Data from 287,264 participants initially free of arrhythmias in the UK Biobank were included in the analysis. Cox regression models were used to examine the relationship between CVH levels calculated by the American Heart Association's Life's Essential 8 (LE8) metrics, with cardiac arrhythmias risk. RESULTS: During a median follow-up period of 12.8 years, 16,802 incident AF, 2186 incident ventricular arrhythmias, and 4128 incident bradyarrhythmias were identified. After adjustment for confounding factors, participants with high initial CVH levels had significantly lower risks for AF (hazard ratio [HR], 0.63; 95% confidence interval [CI], 0.59-0.68), ventricular arrhythmias (HR, 0.48; 95% CI, 0.40-0.59), and bradyarrhythmias (HR, 0.64; 95% CI, 0.55-0.74) compared with those with low CVH levels. Furthermore, each standard deviation (SD) increase in LE8 scores was associated with a 15% lower risk of AF, 21% for ventricular arrhythmias, and 13% for bradyarrhythmias, respectively. In addition, a significant interaction was observed between CVH levels and the genetic risk of AF (P for interaction, 0.021). The reverse correlation seemed to be more noticeable in individuals with a lower genetic susceptibility to AF. CONCLUSIONS: We concluded that higher levels of CVH, estimated by the LE8 metrics, were associated with significantly reduced risks of AF, ventricular arrhythmias, and bradyarrhythmias.
ABSTRACT
Achieving selective detection of ppb-level CO is important for air quality testing at industrial sites to ensure personal safety. Noble metal doping enhances charge transfer, which in turn reduces the detection limit of metal oxide gas sensors. In this work, metal-organic framework-derived Au-doped In2O3 nanotubes with high electrical conductivity are synthesized by pyrolysis of the Au-doped metal-organic framework (In-MIL-68) as a template. Gas-sensing experiments reveal that the detection limit of 0.2% Au-doped In2O3 nanotubes (0.2% Au, mass fraction) is as low as 750 ppb. Meanwhile, the sensing material shows a response value of 18.2 to 50 ppm of CO at 240 °C, which is about 2.8 times higher than that of pure In2O3. Meanwhile, the response and recovery times are short (37 s/86 s). The gas-sensing mechanism of CO is uncovered by in situ DRIFTS through the reaction intermediates. In addition, first-principles calculations suggest that Au doping of In2O3 significantly enhances its adsorption energy for CO and improves the electron transfer properties. This study reveals a novel synthesis pathway for Au-doped In2O3 nanotubular structures and their potential application in low concentration CO detection.
Subject(s)
Carbon Monoxide , Gold , Indium , Metal-Organic Frameworks , Nanotubes , Gold/chemistry , Metal-Organic Frameworks/chemistry , Nanotubes/chemistry , Indium/chemistry , Carbon Monoxide/analysis , Limit of DetectionABSTRACT
Building formwork is a kind of temporary supporting structure consumable material used in the construction field. In recent years, building formwork has gradually developed to become lighter, more environmentally friendly, and have higher performance. This sets higher requirements for the materials used to make building formwork. There is an urgent need to find a lighter and more durable material for building formwork. Magnesium alloys possess the advantages of low density, high alkali resistance, and high strength. As a building formwork material, it can reduce the weight of formwork and improve its durability. Therefore, a magnesium alloy is considered a material with high potential for building formwork. Currently, magnesium alloy building formwork has attracted the attention of many companies and research and development institutions, with preliminary research applications and good feedback on usage effects. It is highly possible to obtain the opportunity to put it into market application. However, to be applied on a large scale, there are still some important problems that need to be solved. These problems fall into three main areas, including the relatively low processing efficiency of magnesium alloy materials, the unstable price of magnesium alloys, and the fact that the formwork is easily corroded during storage. Firstly, at present, the main processing methods for magnesium alloy building formwork are casting and extrusion, and the production efficiency of both methods needs to be improved. Secondly, high-performance magnesium alloy materials are usually more expensive, which is not conducive to the large-scale application of the formwork. The price of magnesium alloys has fluctuated greatly in recent years, which increases the difficulty of promoting magnesium alloy building formwork. Thirdly, in the atmosphere, the oxide film on the surface of the magnesium alloy cannot play an effective role in corrosion resistance. So, surface treatment is necessary for magnesium alloy building formwork. Among the various surface treatment methods for magnesium alloys, the chemical conversion method has the advantages of being easy to operate, cost-effective, and having good corrosion resistance. It may be a very suitable protective method for large-scale applications of magnesium alloy building formwork and possesses excellent potential for application. The future of magnesium alloy building formwork will focus on new low-cost materials, high-efficiency processing technology, and low-cost green anti-corrosion technology. With in-depth research and the maturation of technology, magnesium alloy formwork is expected to play a more important role in the construction industry.
ABSTRACT
Introduction: Bacterial resistance presents a major challenge to both the ecological environment and human well-being, with persistence playing a key role. Multiple studies were recently undertaken to examine the factors influencing the formation of persisters and the underlying process, with a primary focus on Gram-negative bacteria and Staphylococcus aureus (Gram-positive bacteria). Enterococcus faecalis (E. faecalis) is capable of causing a variety of infectious diseases, but there have been few studies of E. faecalis persisters. Previous studies have shown that the sex pheromone cCF10 secreted by E. faecalis induces conjugative plasmid transfer. However, whether the pheromone cCF10 regulates the persistence of E. faecalis has not been investigated. Methods: As a result, we investigated the effect and potential molecular mechanism of pheromone cCF10 in regulating the formation of persisters in E. faecalis OG1RF using a persistent bacteria model. Results and discussion: The metabolically active E. faecalis OG1RF reached a persistence state and temporarily tolerated lethal antibiotic concentrations after 8 h of levofloxacin hydrochloride (20 mg/mL) exposure, exhibiting a persistence rate of 0.109 %. During the growth of E. faecalis OG1RF, biofilm formation was a critical factor contributing to antibiotic persistence, whereas 10 ng/mL cCF10 blocked persister cell formation. Notably, cCF10 mediated the antibiotic persistence of E. faecalis OG1RF via regulating metabolic activity rather than suppressing biofilm formation. The addition of cCF10 stimulated the Opp system and entered bacterial cells, inhibiting (p)ppGpp accumulation, thus maintaining the metabolically active state of bacteria and reducing persister cell generation. These findings offer valuable insights into the formation, as well as the control mechanism of E. faecalis persisters.
ABSTRACT
BACKGROUND: The application of cerebellar transcranial magnetic stimulation (TMS) in stroke patients has received increasing attention due to its neuromodulation mechanisms. However, studies on the effect and safety of cerebellar TMS to improve balance capacity and activity of daily living (ADL) for stroke patients are limited. This systematic review and meta-analysis aimed to investigate the effect and safety of cerebellar TMS on balance capacity and ADL in stroke patients. METHOD: A systematic search of seven electronic databases (PubMed, Embase, Web of Science, Cochrane Central Register of Controlled Trials, China National Knowledge Infrastructure, Wanfang and Chinese Scientific Journal) were conducted from their inception to October 20, 2023. The randomized controlled trials (RCTs) of cerebellar TMS on balance capacity and/or ADL in stroke patients were enrolled. The quality of included studies were assessed by Physiotherapy Evidence Database (PEDro) scale. RESULTS: A total of 13 studies involving 542 participants were eligible. The pooled results from 8 studies with 357 participants showed that cerebellar TMS could significantly improve the post-intervention Berg balance scale (BBS) score (MD = 4.24, 95%CI = 2.19 to 6.29, P < 0.00001; heterogeneity, I2 = 74%, P = 0.0003). The pooled results from 4 studies with 173 participants showed that cerebellar TMS could significantly improve the post-intervention Time Up and Go (TUG) (MD=-1.51, 95%CI=-2.8 to -0.22, P = 0.02; heterogeneity, I2 = 0%, P = 0.41). The pooled results from 6 studies with 280 participants showed that cerebellar TMS could significantly improve the post-intervention ADL (MD = 7.75, 95%CI = 4.33 to 11.17, P < 0.00001; heterogeneity, I2 = 56%, P = 0.04). The subgroup analysis showed that cerebellar TMS could improve BBS post-intervention and ADL post-intervention for both subacute and chronic stage stroke patients. Cerebellar high frequency TMS could improve BBS post-intervention and ADL post-intervention. Cerebellar TMS could still improve BBS post-intervention and ADL post-intervention despite of different cerebellar TMS sessions (less and more than 10 TMS sessions), different total cerebellar TMS pulse per week (less and more than 4500 pulse/week), and different cerebellar TMS modes (repetitive TMS and Theta Burst Stimulation). None of the studies reported severe adverse events except mild side effects in three studies. CONCLUSIONS: Cerebellar TMS is an effective and safe technique for improving balance capacity and ADL in stroke patients. Further larger-sample, higher-quality, and longer follow-up RCTs are needed to explore the more reliable evidence of cerebellar TMS in the balance capacity and ADL, and clarify potential mechanisms.
Subject(s)
Activities of Daily Living , Cerebellum , Postural Balance , Stroke Rehabilitation , Stroke , Transcranial Magnetic Stimulation , Humans , Transcranial Magnetic Stimulation/methods , Postural Balance/physiology , Stroke Rehabilitation/methods , Cerebellum/physiology , Cerebellum/physiopathology , Stroke/physiopathology , Stroke/therapy , Randomized Controlled Trials as Topic/methodsABSTRACT
Atherosclerosis (AS) is a common cause of coronary heart disease and stroke. The delivery of exogenous H2S and in situ production of O2 within atherosclerotic plaques can help suppress inflammatory cell infiltration and alleviate disease progression. However, the uncontrolled release of gas donors hinders achieving effective drug concentrations and causes toxic effects. Herein, diallyl trisulfide (DATS)-loaded metal-organic cage (MOC)-68-doped MnO2 nanoparticles are developed as a microenvironment-responsive nanodrug with the capacity for the in situ co-delivery of H2S and O2 to inflammatory cells within plaques. This nanomedicine exhibited excellent monodispersity and stability and protected DATS from degradation in the circulation. In vitro studies showed that the nanomedicine reduced macrophage polarization toward an inflammatory phenotype and inhibited the formation of foam cells, while suppressing the expression of NOD-like receptor thermal protein domain associated protein 3 (NLRP3) and interleukin-1ß. In a mouse model of ApoE-/- genotype, the nanomedicine reduces the plaque burden, inflammatory infiltration, and hypoxic conditions within the plaques. Furthermore, the treatment process and therapeutic effects can be monitored by magnetic resonance image (MRI), in real time upon Mn2+ release from the acidic- and H2O2- microenvironment-responsive MnO2 nanoparticles. The DATS-loaded MOC-68-doped MnO2-based nanodrug holds great promise as a novel theranostic platform for AS.
ABSTRACT
AIMS: Pulsed field ablation (PFA) is an emerging non-thermal ablative modality demonstrating considerable promise for catheter ablation of atrial fibrillation (AF). However, these PFA trials have almost universally included only Caucasian populations, with little data on its effect on other races/ethnicities. The PLEASE-AF trial sought to study the 12-month efficacy and the safety of a multi-electrode hexaspline PFA catheter in treating a predominantly Asian/Chinese population of patients with drug-refractory paroxysmal AF. METHODS AND RESULTS: Patients underwent pulmonary vein (PV) isolation (PVI) by delivering different pulse intensities at the PV ostium (1800 V) and atrium (2000 V). Acute success was defined as no PV potentials and entrance/exit conduction block of all PVs after a 20-min waiting period. Follow-up at 3, 6, and 12 months included 12-lead electrocardiogram and 24-h Holter examinations. The primary efficacy endpoint was 12-month freedom from any atrial arrhythmias lasting at least 30 s. The cohort included 143 patients from 12 hospitals treated by 28 operators: age 60.2 ± 10.0 years, 65.7% male, Asian/Chinese 100%, and left atrial diameter 36.6 ± 4.9 mm. All PVs (565/565, 100%) were successfully isolated. The total procedure, catheter dwell, total PFA application, and total fluoroscopy times were 123.5 ± 38.8 min, 63.0 ± 30.7 min, 169.7 ± 34.6 s, and 27.3 ± 10.1 min, respectively. The primary endpoint was observed in 124 of 143 patients (86.7%). One patient (0.7%) developed a small pericardial effusion 1-month post-procedure, not requiring intervention. CONCLUSION: The novel hexaspline PFA catheter demonstrated universal acute PVI with an excellent safety profile and promising 12-month freedom from recurrent atrial arrhythmias in an Asian/Chinese population with paroxysmal AF. CLINICAL TRIAL REGISTRATION: ClinicalTrials.gov Identifier: NCT05114954.
Subject(s)
Atrial Fibrillation , Catheter Ablation , Pulmonary Veins , Humans , Atrial Fibrillation/surgery , Atrial Fibrillation/physiopathology , Atrial Fibrillation/diagnosis , Male , Female , Middle Aged , Catheter Ablation/methods , Catheter Ablation/adverse effects , Pulmonary Veins/surgery , Pulmonary Veins/physiopathology , Aged , Treatment Outcome , Asian People , China , Cardiac Catheters , Recurrence , Electrocardiography, Ambulatory , Time Factors , Equipment Design , Heart Rate , Action PotentialsABSTRACT
Pure magnesium anode used in rechargeable magnesium batteries (RMB) exhibits high theoretical capacity but has been challenged by the passivation issue with conventional electrolytes. Alloy-type anodes have the potential to surpass this issue and have attracted increasing attention. However, the kinetic performance and stabilities of conventional alloy anodes are still constrained. In this study, the InSb-10%C anode is synthesized by a two-step high-energy ball milling process. The InSb-10%C anode exhibits a remarkably high capacity of up to 448 mA h g-1, significantly improved cycle performance (234 mA h g-1 at 100 cycles) and rate performance (168 mA h g-1 at 500 mA g-1). The above-mentioned superior performance of the InSb-10%C anode for RMBs is attributed to the cellular graphitized amorphous carbon composite structure (CGA) which effectively refines the particle size and restricts the volume expansion. Additionally, the reduced surface electron density of InSb combined with the high conductivity resulting from graphitization enhances the Mg2+ diffusion performance. Notably, the InSb-10%C anode demonstrates good compatibility with conventional halogen-free salt ether-based electrolytes in the full battery configuration.
ABSTRACT
RATIONALE: The disruption of the balance between fatty acid (FA) uptake and oxidation (FAO) leads to cardiac lipotoxicity, serving as the driving force behind diabetic cardiomyopathy (DbCM). Sirtuin 5 (Sirt5), a lysine de-succinylase, could impact diverse metabolic pathways, including FA metabolism. Nevertheless, the precise roles of Sirt5 in cardiac lipotoxicity and DbCM remain unknown. OBJECTIVE: This study aims to elucidate the role and underlying mechanism of Sirt5 in the context of cardiac lipotoxicity and DbCM. METHODS AND RESULTS: The expression of myocardial Sirt5 was found to be modestly elevated in diabetic heart failure patients and mice. Cardiac dysfunction, hypertrophy and lipotoxicity were exacerbated by ablation of Sirt5 but improved by forced expression of Sirt5 in diabetic mice. Notably, Sirt5 deficiency impaired FAO without affecting the capacity of FA uptake in the diabetic heart, leading to accumulation of FA intermediate metabolites, which mainly included medium- and long-chain fatty acyl-carnitines. Mechanistically, succinylomics analyses identified carnitine palmitoyltransferase 2 (CPT2), a crucial enzyme involved in the reconversion of fatty acyl-carnitines to fatty acyl-CoA and facilitating FAO, as the functional succinylated substrate mediator of Sirt5. Succinylation of Lys424 in CPT2 was significantly increased by Sirt5 deficiency, leading to the inactivation of its enzymatic activity and the subsequent accumulation of fatty acyl-carnitines. CPT2 K424R mutation, which mitigated succinylation modification, counteracted the reduction of enzymatic activity in CPT2 mediated by Sirt5 deficiency, thereby attenuating Sirt5 knockout-induced FAO impairment and lipid deposition. CONCLUSIONS: Sirt5 deficiency impairs FAO, leading to cardiac lipotoxicity in the diabetic heart through the succinylation of Lys424 in CPT2. This underscores the potential roles of Sirt5 and CPT2 as therapeutic targets for addressing DbCM.
Subject(s)
Carnitine O-Palmitoyltransferase , Diabetic Cardiomyopathies , Fatty Acids , Lipid Metabolism , Myocytes, Cardiac , Sirtuins , Animals , Diabetic Cardiomyopathies/metabolism , Diabetic Cardiomyopathies/genetics , Diabetic Cardiomyopathies/pathology , Carnitine O-Palmitoyltransferase/metabolism , Carnitine O-Palmitoyltransferase/genetics , Sirtuins/metabolism , Sirtuins/genetics , Mice , Fatty Acids/metabolism , Myocytes, Cardiac/metabolism , Humans , Male , Oxidation-Reduction , Diabetes Mellitus, Experimental/metabolism , Diabetes Mellitus, Experimental/complicationsABSTRACT
The Presenilin (Psn) gene is closely related to aging, but it is still unclear the role of Psn genes in skeletal muscle. Here, the Psn-UAS/Mhc-GAL4 system in Drosophila was used to regulate muscle Psn overexpression(MPO) and muscle Psn knockdown(MPK). Drosophila were subjected to endurance exercise from 4 weeks to 5 weeks old. The results showed that MPO and exercise significantly increased climbing speed, climbing endurance, lifespan, muscle SOD activity, Psn expression, Sirt1 expression, PGC-1α expression, and armadillo (arm) expression in aged Drosophila, and they significantly decreased muscle malondialdehyde levels. Interestingly, when the Psn gene is knockdown by 0.78 times, the PGC-1α expression and arm expression were also down-regulated, but the exercise capacity and lifespan were increased. Furthermore, exercise combined with MPO further improved the exercise capacity and lifespan. MPK combined with exercise further improves the exercise capacity and lifespan. Thus, current results confirmed that the muscle Psn gene was a vital gene that contributed to the healthy aging of skeletal muscle since whether it was overexpressed or knocked down, the aging progress of skeletal muscle structure and function was slowed down by regulating the activity homeostasis of Sirt1/PGC-1α pathway and Psn/arm pathway. Exercise enhanced the function of the Psn gene to delay skeletal muscle aging by up regulating the activity of the Sirt1/PGC-1α pathway and Psn/arm pathway.
Subject(s)
Longevity , Muscle, Skeletal , Physical Conditioning, Animal , Signal Transduction , Animals , Aging/physiology , Aging/genetics , Aging/metabolism , Drosophila Proteins/genetics , Drosophila Proteins/metabolism , Healthy Aging/genetics , Healthy Aging/metabolism , Healthy Aging/physiology , Muscle, Skeletal/metabolism , Muscle, Skeletal/physiology , Peroxisome Proliferator-Activated Receptor Gamma Coactivator 1-alpha/metabolism , Peroxisome Proliferator-Activated Receptor Gamma Coactivator 1-alpha/genetics , Sirtuin 1/metabolism , Sirtuin 1/genetics , Transcription Factors/metabolism , Transcription Factors/geneticsABSTRACT
BACKGROUND: Atrial fibrillation (AF) is a common arrhythmia with high morbidity and mortality implications. Several studies have described a paradoxical inverse relationship between serum cholesterol and the risk of AF, but it remains unknown whether remnant cholesterol (RC) is associated with AF incidence. OBJECTIVE: This study aims to prospectively investigate the association between RC and AF. METHODS: A total of 392,783 participants free of AF at baseline from the UK Biobank were included for the analysis. Cox proportional hazards model, subgroup analysis, and sensitivity analyses were used to evaluate the independent association between RC levels and the risk of new-onset AF. Furthermore, we performed a discordance analysis by using the median cutoff points of low-density lipoprotein cholesterol (LDL-C) and RC. RESULTS: After a median follow-up of 12.8 years (interquartile range 12.0-13.6 years), a total of 23,558 participants experienced incident AF. Compared with the highest RC level, the lower RC level was associated with an increased risk of AF incidence (quartile 1 vs quartile 4: hazard ratio 1.396; 95% confidence interval [CI] 1.343-1.452). The results remained robust across a series of sensitivity analyses. In the discordance analyses, a significantly higher risk of AF was observed in participants with discordant low RC/high LDL-C levels than in those with concordant high RC/LDL-C levels. In the low LDL-C group, RC reduction even contributed to an additional 15.8% increased rate of incident AF (low RC/low LDL-C: hazard ratio 1.303; 95% CI 1.260-1.348 vs high RC/low LDL-C: hazard ratio 1.125; 95% CI 1.079-1.172). CONCLUSION: Low RC levels were associated with an increased risk of incident AF independent of traditional cardiovascular risk factors.
Subject(s)
Atrial Fibrillation , Cholesterol , Humans , Atrial Fibrillation/epidemiology , Atrial Fibrillation/blood , Male , Female , Prospective Studies , Middle Aged , Incidence , Cholesterol/blood , Risk Factors , United Kingdom/epidemiology , Follow-Up Studies , Cholesterol, LDL/blood , Aged , Risk Assessment/methods , Biomarkers/bloodABSTRACT
Antibacterial hydrogels have attracted significant attention due to their diverse applications, efficient antimicrobial properties, and adaptability to various environments and requirements. However, their relatively fragile structure, coupled with the potential for environmental toxicity when exposed to their surroundings for extended periods, may significantly limit their practical application potential. In this work, a composite hydrogel was synthesized with outstanding mechanical features and antibacterial capability. The hydrogel was developed through the combination of the eco-friendly and enduring antibacterial agent, lignin silver nanoparticles (Lig-Ag NPs), with polyvinyl alcohol (PVA) and sodium alginate (SA), in varying proportions. The successful synthesis of the hydrogel and the dispersed distribution of Lig-Ag NPs within the hydrogel were confirmed by various analytical techniques, including field emission scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), mercury intrusion porosimetry (MIP), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The formation of multiple hydrogen bonds between Lig-Ag NPs and the composites contributed to a more stable and dense network structure of the hydrogel, consequently enhancing its mechanical properties. Rheological tests revealed that the hydrogel exhibited an elastic response and demonstrated outstanding self-recovery properties. Significantly, the antibacterial hydrogel demonstrated effectiveness against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), achieving a <5% survival of bacteria within 12 h. This study presented a green and straightforward synthetic strategy for the application of antibacterial composite hydrogels in various fields.
ABSTRACT
Cylindrospermopsin (CYN), a cyanobacterial toxin, has been detected in the global water environment. However, information concerning the potential environmental risk of CYN is limited, since the majority of previous studies have mainly focused on the adverse health effects of CYN through contaminated drinking water. The present study reported that CYN at environmentally relevant levels (0.1-100⯵g/L) can significantly enhance the conjugative transfer of RP4 plasmid in Escherichia coli genera, wherein application of 10⯵g/L of CYN led to maximum fold change of â¼6.5- fold at 16â¯h of exposure. Meanwhile, evaluation of underlying mechanisms revealed that environmental concentration of CYN exposure could increase oxidative stress in the bacterial cells, resulting in ROS overproduction. In turn, this led to an upregulation of antioxidant enzyme-related genes to avoid ROS attack. Further, inhibition of the synthesis of glutathione (GSH) was also detected, which led to the rapid depletion of GSH in cells and thus triggered the SOS response and promoted the conjugative transfer process. Increase in cell membrane permeability, upregulation of expression of genes related to pilus generation, ATP synthesis, and RP4 gene expression were also observed. These results highlight the potential impact on the spread of antimicrobial resistance in water environments.
Subject(s)
Alkaloids , Bacterial Toxins , Cyanobacteria Toxins , Escherichia coli , Glutathione , Plasmids , Uracil , Plasmids/genetics , Glutathione/metabolism , Escherichia coli/drug effects , Escherichia coli/genetics , Bacterial Toxins/toxicity , Uracil/analogs & derivatives , Uracil/toxicity , Oxidative Stress/drug effects , Reactive Oxygen Species/metabolism , Conjugation, Genetic , Drug Resistance, Multiple, Bacterial/drug effects , Drug Resistance, Multiple, Bacterial/geneticsABSTRACT
Rechargeable magnesium-metal batteries (RMMBs) are promising next-generation secondary batteries; however, their development is inhibited by the low capacity and short cycle lifespan of cathodes. Although various strategies have been devised to enhance the Mg2+ migration kinetics and structural stability of cathodes, they fail to improve electronic conductivity, rendering the cathodes incompatible with magnesium-metal anodes. Herein, we propose a dual-defect engineering strategy, namely, the incorporation of Mg2+ pre-intercalation defect (P-Mgd) and oxygen defect (Od), to simultaneously improve the Mg2+ migration kinetics, structural stability, and electronic conductivity of the cathodes of RMMBs. Using lamellar V2O5·nH2O as a demo cathode material, we prepare a cathode comprising Mg0.07V2O5·1.4H2O nanobelts composited with reduced graphene oxide (MVOH/rGO) with P-Mgd and Od. The Od enlarges interlayer spacing, accelerates Mg2+ migration kinetics, and prevents structural collapse, while the P-Mgd stabilizes the lamellar structure and increases electronic conductivity. Consequently, the MVOH/rGO cathode exhibits a high capacity of 197 mAh g-1, and the developed Mg foil//MVOH/rGO full cell demonstrates an incredible lifespan of 850 cycles at 0.1 A g-1, capable of powering a light-emitting diode. The proposed dual-defect engineering strategy provides new insights into developing high-durability, high-capacity cathodes, advancing the practical application of RMMBs, and other new secondary batteries.
ABSTRACT
The original version of this article (Liu et al., 2021) unfortunately contained a mistake: statement of equal contribution is missing. This correction article shows that Chiyu LIU and Sixu CHEN contributed equally to this work. The original article has been corrected.