Quantifying Asymmetric Zinc Deposition: A Guide Factor for Designing Durable Zinc Anodes.

Zinc metal is recognized as the most promising anode for aqueous energy storage but suffers from severe dendrite growth and poor reversibility. However, the coulombic efficiency lacks specificity for zinc dendrite growth, particularly in Zn||Zn symmetric cells. Herein, a novel indicator (fD) based on the characteristic crystallization peaks is proposed to evaluate the growth and distribution of zinc dendrites. As a proof of concept, triethylenetetramine (TETA) is adopted as an electrolyte additive to manipulate the zinc flux for uniform deposition, with a corroborating low fD value. A highly durable zinc symmetric cell is achieved, lasting over 2500 h at 10 mA cm-2 and 400 h at a large discharge of depth (10 mA cm-2, 10 mAh cm-2). Supported by the low fD value, the Zn||TETA-ZnSO4||MnO2 batteries overcome the sudden short circuit and fast capacity fading. The study provides a feasible method to evaluate zinc dendrites and sheds light on the design of highly reversible zinc anodes.

Highly Reversible Positive-Valence Conversion of Sulfur Chemistry for High-Voltage Zinc-Sulfur Batteries.

Sulfur is a promising conversion-type cathode for zinc batteries (ZBs) due to its high discharge capacity and cost-effectiveness. However, the redox conversion of multivalent S in ZBs is still limited, only having achieved S0/S2- redox conversion with low discharge voltage and poor reversibility. This study presents significant progress by demonstrating, for the first time, the reversible S2-/S4+ redox behavior in ZBs with up to six-electron transfer (with an achieved discharge capacity of ≈1284 mAh g-1) using a highly concentrated ClO4 --containing electrolyte. The developed succinonitrile-Zn(ClO4)2 eutectic electrolyte stabilizes the positive-valence S compound and contributes to an ultra-low polarization voltage. Notably, the achieved flat discharge plateaus demonstrate the highest operation voltage (1.54 V) achieved to date in Zn‖S batteries. Furthermore, the high-voltage Zn‖S battery exhibits remarkable conversion dynamics, excellent cycling performance (85.7% capacity retention after 500 cycles), high efficiency (98.4%), and energy density (527 Wh kg S -1). This strategy of positive-valence conversion of sulfur represents a significant advancement in understanding sulfur chemistry in batteries and holds promise for future high-voltage sulfur-based batteries.

Starch-mediated colloidal chemistry for highly reversible zinc-based polyiodide redox flow batteries.

Aqueous Zn-I flow batteries utilizing low-cost porous membranes are promising candidates for high-power-density large-scale energy storage. However, capacity loss and low Coulombic efficiency resulting from polyiodide cross-over hinder the grid-level battery performance. Here, we develop colloidal chemistry for iodine-starch catholytes, endowing enlarged-sized active materials by strong chemisorption-induced colloidal aggregation. The size-sieving effect effectively suppresses polyiodide cross-over, enabling the utilization of porous membranes with high ionic conductivity. The developed flow battery achieves a high-power density of 42 mW cm-2 at 37.5 mA cm-2 with a Coulombic efficiency of over 98% and prolonged cycling for 200 cycles at 32.4 Ah L-1posolyte (50% state of charge), even at 50 °C. Furthermore, the scaled-up flow battery module integrating with photovoltaic packs demonstrates practical renewable energy storage capabilities. Cost analysis reveals a 14.3 times reduction in the installed cost due to the applicability of cheap porous membranes, indicating its potential competitiveness for grid energy storage.

Halide Exchange in Perovskites Enables Bromine/Iodine Hybrid Cathodes for Highly Durable Zinc Ion Batteries.

With the increasing need for reliable storage systems, the conversion-type chemistry typified by bromine cathodes attracts considerable attention due to sizeable theoretical capacity, cost efficiency, and high redox potential. However, the severe loss of active species during operation remains a problem, leading researchers to resort to concentrated halide-containing electrolytes. Here, profiting from the intrinsic halide exchange in perovskite lattices, a novel low-dimensional halide hybrid perovskite cathode, TmdpPb2[IBr]6, which serves not only as a halogen reservoir for reversible three-electron conversions but also as an effective halogen absorbent by surface Pb dangling bonds, C─H…Br hydrogen bonds, and Pb─I…Br halogen bonds, is proposed. As such, the Zn||TmdpPb2[IBr]6 battery delivers three remarkable discharge voltage plateaus at 1.21 V (I0/I-), 1.47 V (I+/I0), and 1.74 V (Br0/Br-) in a typical halide-free electrolyte; meanwhile, realizing a high capacity of over 336 mAh g-1 at 0.4 A g-1 and high capacity retentions of 88% and 92% after 1000 cycles at 1.2 A g-1 and 4000 cycles at 3.2 A g-1, respectively, accompanied by a high coulombic efficiency of ≈99%. The work highlights the promising conversion-type cathodes based on metal-halide perovskite materials.

Metal-Free Eutectic Electrolyte with Weak Hydrogen Bonds for High-Rate and Ultra-Stable Ammonium-Ion Batteries.

As the need for sustainable battery chemistry grows, non-metallic ammonium ion (NH4 + ) batteries are receiving considerable attention because of their unique properties, such as low cost, nontoxicity, and environmental sustainability. In this study, the solvation interactions between NH4 + and solvents are elucidated and design principles for NH4 + weakly solvated electrolytes are proposed. Given that hydrogen bond interactions dominate the solvation of NH4 + and solvents, the strength of the solvent's electrostatic potential directly determines the strength of its solvating power. As a proof of concept, succinonitrile with relatively weak electronegativity is selected to construct a metal-free eutectic electrolyte (MEE). As expected, this MEE is able to significantly broaden the electrochemical stability window and reduce the solvent binding energy in the solvation shell, which leads to a lower desolvation energy barrier and a fast charge transfer process. As a result, the as-constructed NH4 -ion batteries exhibit superior reversible rate capability (energy density of 65 Wh kg-1 total active mass at 600 W kg-1 ) and unprecedent long-term cycling performance (retention of 90.2% after 1000 cycles at 1.0 A g-1 ). The proposed methodology for constructing weakly hydrogen bonded electrolytes will provide guidelines for implementing high-rate and ultra-stable NH4 + -based energy storage systems.

Selenium-Anchored Chlorine Redox Chemistry in Aqueous Zinc Dual-Ion Batteries.

Chlorine-based batteries with Cl0 to Cl- redox reaction (ClRR) are promising for high-performance energystorage due to their high redox potential and large theoretical capacity. However, the inherent gas-liquid conversion feature of ClRR together with poor Cl fixation can cause Cl2 leakage, reducing battery reversibility. Herein, we utilize a Se-based organic molecule, diphenyl diselenide (di-Ph-Se), as the Cl anchoring agent and realize an atomic level-Cl fixation through chalcogen-halogencoordinating chemistry. The promoted Cl fixation, with two oxidized Cl0 anchoring on a single Ph-Se, and the multivalence conversion of Se contributeto a six-electron conversion process with up to 507 mAh g-1 and an average voltage of 1.51 V, as well as a high energy density of 665 Wh Kg-1 . Based on the superior reversibility of thedeveloped di-Ph-Se electrode with ClRR, a remarkable rate performance (205 mAh g-1 at 5 A g-1 ) and cycling performance (capacity retention of 77.3 % after 500cycles) are achieved. Significantly, the pouch cell delivers a record arealcapacity of up to 6.87 mAh cm-2 and extraordinary self-discharge performance. This chalcogen-halogen coordination chemistry between the Se electrode and Cl provides a new insight for developing reversible and efficientbatteries with halogen redox reactions.

A High-Energy Four-Electron Zinc Battery Enabled by Evoking Full Electrochemical Activity in Copper Sulfide Electrode.

The growing global demand for sustainable and cost-effective energy storage solutions has driven the rapid development of zinc batteries. Despite significant progress in recent years, enhancing the energy density of zinc batteries remains a crucial research focus. One prevalent strategy involves the development of high-capacity and/or high-voltage cathode materials. CuS, a commonly used electrode material, exhibits a two-electron transfer mechanism; however, the reduced sulfion lacks electrochemical activity and thereby limits its discharge capacity and redox potential. In this study, we activate a CuS cathode to form a high-valence Cu2+&S compound using a deep-eutectic-solvent (DES)-based electrolyte. The presence of Cl- in the DES-based electrolyte is crucial to the reversibility of the redox chemistry, and the liquid-phase-involved electrochemical process facilitates redox kinetics. A four-electron transfer pathway involving five reaction steps is identified for the CuS electrode, which unleashes the full electrochemical activity of the S element. Consequently, the full cell delivers a large discharge capacity of ∼800 mAh g-1 at 0.2 A g-1 and yields a high discharge plateau starting at 1.58 V, contributing to energy densities of up to 650 Wh kg-1 (based on CuS). This work offers a promising approach to developing high-energy zinc batteries.

Tellurium with Reversible Six-Electron Transfer Chemistry for High-Performance Zinc Batteries.

Chalcogens, especially tellurium (Te), as conversion-type cathodes possess promising prospects for zinc batteries (ZBs) with potential rich valence supply and high energy density. However, the conversion reaction of Te is normally restricted to the Te2-/Te0 redox with a low voltage plateau at ∼0.59 V (vs Zn2+/Zn) rather than the expected positive valence conversion of Te0 to Ten+, inhibiting the development of Te-based batteries toward high output voltage and energy density. Herein, the desired reversible Te2-/Te0/Te2+/Te4+ redox behavior with up to six-electron transfer was successfully activated by employing a highly concentrated Cl--containing electrolyte (Cl- as strong nucleophile) for the first time. Three flat discharge plateaus located at 1.24, 0.77, and 0.51 V, respectively, are attained with a total capacity of 802.7 mAh g-1. Furthermore, to improve the stability of Ten+ products and enhance the cycling stability, a modified ionic liquid (IL)-based electrolyte was fabricated, leading to a high-performance Zn∥Te battery with high areal capacity (7.13 mAh cm-2), high energy density (542 Wh kgTe-1 or 227 Wh Lcathdoe+anode-1), excellent cycling performance, and a low self-discharge rate based on 400 mAh-level pouch cell. The results enhance the understanding of tellurium chemistry in batteries, substantially promising a remarkable route for advanced ZBs.

Highly Reversible Intercalation of Calcium Ions in Layered Vanadium Compounds Enabled by Acetonitrile-Water Hybrid Electrolyte.

Currently, the development of calcium-ion batteries (CIBs) is still in its infancy and greatly plagued by the absence of satisfactory cathode materials and compatible electrolytes. Herein, an acetonitrile-water hybrid electrolyte is first developed in CIB chemistry, in which, the strong lubricating and shielding effect of water solvent significantly boosts the swift transport of bulky Ca2+, thus contributing to large capacity storage of Ca2+ in layered vanadium oxides (Ca0.25V2O5·nH2O, CVO). Meanwhile, the acetonitrile component noticeably suppresses the dissolution of vanadium species during repeated Ca2+-ion uptake/release, endowing the CVO cathode with a robust cycle life. More importantly, spectral characterization and molecular dynamics simulation confirm that the water molecules are well stabilized by the mutual hydrogen bonding with acetonitrile molecules (O-H···N), endowing the aqueous hybrid electrolyte with high electrochemical stability. By using this aqueous hybrid electrolyte, the CVO electrode shows a high specific discharge capacity of 158.2 mAh g-1 at 0.2 A g-1, an appealing capacity of 104.6 mAh g-1 at a high rate of 5 A g-1, and a capacity retention of 95% after 2000 cycles at 1.0 A g-1, which is a record-high performance for CIBs reported so far. A mechanistic study exemplifies the reversible extraction of Ca2+ from the gap of VO polyhedral layers, which are accompanied by the reversible V-O and V-V skeleton change as well as reversible variation of layer spacing. This work constitutes a major advance in developing high-performance Ca-ion batteries.

Cross-linked polyaniline for production of long lifespan aqueous iron||organic batteries with electrochromic properties.

Aqueous iron batteries are appealing candidates for large-scale energy storage due to their safety and low-cost aspects. However, the development of aqueous Fe batteries is hindered by their inadequate long-term cycling stability. Here, we propose the synthesis and application as positive electrode active material of cross-linked polyaniline (C-PANI). We use melamine as the crosslinker to improve the electronical conductivity and electrochemical stability of the C-PANI. Indeed, when the C-PANI is tested in combination with a Fe metal negative electrode and 1 M iron trifluoromethanesulfonate (Fe(TOF)2) electrolyte solution, the coin cell can deliver a specific capacity of about 110 mAh g-1 and an average discharge voltage of 0.55 V after 39,000 cycles at 25 A g-1 with a test temperature of 28 °C ± 1 °C. Furthermore, mechanistic studies suggest that Fe2+ ions are bonded to TOF- anions to form positively charged complexes Fe(TOF)+, which are stored with protons in the C-PANI electrode structures. Finally, we also demonstrate the use of C-PANI in combination with a polymeric hydrogel electrolyte to produce a flexible reflective electrochromic lab-scale iron battery prototype.

Photosensitization Efficiency Modulation of Atomically Precise Silver Nanoclusters for Photoelectrocatalysis.

Atomically precise metal nanoclusters (NCs) have emerged as feasible alternatives to traditional photosensitizers in solar energy conversion due to the unique atomic stacking mode, quantum size effect, and abundant active sites. Despite the sporadic advancement in fabricating metal NC-based photosystems, most of which are predominantly centered on Au NCs, unleashing atomically precise silver nanoclusters as light-harvesting antennas has still been in the infant stage, with the charge transfer mechanism remaining elusive. Herein, we comprehensively demonstrate the photosensitization effect of Ag NCs in the photoelectrochemical (PEC) water-splitting reaction and strictly evaluate the correlation of photosensitization efficiency with atomic architecture. To these ends, tailor-made negatively charged l-glutathione (GSH)-capped Ag NCs [Agx, Ag9(GSH)6, Ag16(GSH)9, Ag31(GSH)19] as building blocks are controllably deposited on the metal oxide (MOs = TiO2, WO3, Fe2O3) substrate by a facile self-assembly strategy. Benefiting from the highly efficient photosensitization effect of atomically precise Ag NCs, these self-assembled MOs/Ag NC heterostructured photoanodes with an elegant charge transfer interface demonstrate significantly enhanced photoelectrochemical water oxidation performances under visible-light irradiation on account of efficient charge transport from Ag NCs to the MO substrate, substantially prolonging the charge lifetime of Ag NCs. Our work would significantly inspire ongoing interest in unlocking the generic photosensitization capability of atomically precise metal NCs for solar energy conversion.

A Static Tin-Manganese Battery with 30000-Cycle Lifespan Based on Stabilized Mn3+/Mn2+ Redox Chemistry.

High-potential Mn3+/Mn2+ redox couple (>1.3 V vs SHE) in a static battery system is rarely reported due to the shuttle and disproportionation of Mn3+ in aqueous solutions. Herein, based on reversible stripping/plating of the Sn anode and stabilized Mn2+/Mn3+ redox couple in the cathode, an aqueous Sn-Mn full battery is established in acidic electrolytes. Sn anode exhibits high deposition efficiency, low polarization, and excellent stability in acidic electrolytes. With the help of H+ and a complexing agent, a reversible conversion between Mn2+ and Mn3+ ions takes place on the graphite surface. Pyrophosphate ligand is initially employed to form a protective layer through a complexation process with Sn4+ on the electrode surface, effectively preventing Mn3+ from disproportionation and hindering the uncontrollable diffusion of Mn3+ to electrolytes. Benefiting from the rational design, the full battery delivers satisfied electrochemical performance including a large capacity (0.45 mAh cm-2 at 5 mA cm-2), high discharge plateau voltage (>1.6 V), excellent rate capability (58% retention from 5 to 30 mA cm-2), and superior cycling stability (no decay after 30 000 cycles). The battery design strategy realizes a robustly stable Mn3+/Mn2+ redox reaction, which broadens research into ultrafast acidic battery systems.

A Covalent Organic Framework as a Long-life and High-Rate Anode Suitable for Both Aqueous Acidic and Alkaline Batteries.

Aqueous rechargeable batteries are prospective candidates for large-scale grid energy storage. However, traditional anode materials applied lack acid-alkali co-tolerance. Herein, we report a covalent organic framework containing pyrazine (C=N) and phenylimino (-NH-) groups (HPP-COF) as a long-cycle and high-rate anode for both acidic and alkaline batteries. The HPP-COF's robust covalent linkage and the hydrogen bond network between -NH- and water molecules collectively improve the acid-alkaline co-tolerance. More importantly, the hydrogen bond network promotes the rapid transport of H+ /OH- by the Grotthuss mechanism. As a result, the HPP-COF delivers a superior capacity and cycle stability (66.6 mAh g-1 @ 30 A g-1 , over 40000 cycles in 1 M H2 SO4 electrolyte; 91.7 mAh g-1 @ 100 A g-1 , over 30000 cycles @ 30 A g-1 in 1 M NaOH electrolyte). The work opens a new direction for the structural design and application of COF materials in acidic and alkaline batteries.

Investigation on crashworthiness and mechanism of a bionic antler-like gradient thin-walled structure.

Inspired by an impact-resistant antler, a novel size-gradient thin-walled structure is designed as an energy absorber. Its crashworthiness and mechanism are investigated by finite element simulation. The results show that the bionic-antler gradient structure has excellent crashworthiness performance with the specific energy absorption (SEA) of 2.17 and 1.29 times that of cylinder and fractal spider web, respectively, and the crushing force efficiency as high as 91.54%. Furthermore, when its SEA is the same as that of the fractal spider web, the peak crushing force can be reduced by 35%. The bionic-antler gradient structure produces many folds due to small folding wavelength, which expands the scope of energy storage area and improves the value of energy storage. Increasing properly the cell size-gradient or decreasing the average cell size can further enhance the crashworthiness performance of the bionic-antler gradient structure.

Optimization Strategies of Electrolytes for Low-Temperature Aqueous Batteries.

Aqueous rechargeable batteries (ARBs) are considered promising electrochemical energy storage systems for grid-scale applications due to their low cost, high safety, and environmental benignity. With the demand for a wide range of application scenarios, batteries are required to work in various harsh conditions, especially the cold weather. Nevertheless, electrolytes would freeze at extremely low temperatures, resulting in dramatically sluggish kinetics and severe performance degradation. Here, we discuss the behaviors of hydrogen bonds and basic principles of anti-freezing mechanisms in aqueous electrolytes. Then, we present a systematical review of the optimization strategies of electrolytes for low-temperature aqueous batteries. Finally, the challenges and promising routes for further development of aqueous low-temperature electrolytes are provided. This review can serve as a comprehensive reference to boost the further development and practical applications of advanced ARBs operated at low temperatures.

miR-212-3p attenuates neuroinflammation of rats with Alzheimer's disease via regulating the SP1/BACE1/NLRP3/Caspase-1 signaling pathway.

Alzheimer's disease (AD) ranks as the leading cause of dementia. MicroRNA (miR)-212-3p has been identified to exert neuroprotective effects on brain disorders. The current study analyzed the protective role of miR-212-3p in AD rats via regulating the nucleotide-binding oligomerization domain-like receptor family pyrin domain containing 3 (NLRP3)/Caspase-1 signaling pathway. The AD rat model was established via injection of amyloid-ß 1-42 (Aß1-42), followed by the Morris water maze test. The morphology and functions of neurons were observed. Furthermore, miR-212-3p, NLRP3, cleaved Caspase-1, gasdermin D N-terminus, interleukin (IL)-1ß and IL-18 expressions were measured. H19-7 cells were treated with Aß1-42 to establish the AD cell model, followed by an assessment of cell viability and pyroptosis. Downstream targets of miR-212-3p and specificity protein 1 (SP1), as well as beta-site amyloid precursor protein cleaving enzyme 1 (BACE1) were predicted by databases and testified using dual-luciferase and chromatin immunoprecipitation assays. miR-212-3p was weakly expressed in AD rats. miR-212-3p overexpression was linked to improved learning and memory capacities of AD rats and reduced neuronal pyroptosis linked to neuroinflammation attenuation. In vitro, miR-212-3p improved viability and suppressed pyroptosis of neurons via inhibiting NLRP3/Caspase-1. Overall, miR-212-3p inhibited SP1 expression to block BACE1-induced activation of NLRP3/Caspase-1, thereby attenuating neuroinflammation of AD rats.

Unexpected Boosted Solar Water Oxidation by Nonconjugated Polymer-Mediated Tandem Charge Transfer.

Conjugated polymers are deemed as conductive carrier mediators for engendering the π electrons along the molecular framework, while the role of nonconjugated insulated polymers has been generally overlooked without the capability to participate in the solar-powered oxidation-reduction kinetics and charge-transfer process. Alternatively, considering the ultrashort charge lifetime and significant deficiency of metal nanocluster (NC)-based photosystems, the fine tuning of charge migration over atomically precise ultrasmall metal NCs as novel light-harvesting antennas has so far not yet been unleashed. Here, we unlock the charge-transfer capability of a nonconjugated polymer to modulate the charge flow over metal NCs (Aux and Au25) by such a solid-state nonconductive polymer via a conceptually new chemistry strategy by which l-glutathione (GSH)-capped gold (Aux@GSH) NCs and poly(diallyl-dimethylammonium chloride) (PDDA) were alternately self-assembled on the metal oxide (MO: WO3, Fe2O3, and TiO2) substrates. The ultrathin nonconjugated PDDA interim layer periodically intercalated in-between Aux (Au25) NC layers concurrently serves as an unexpected charge-transfer mediator to foster the unidirectional electron flow from Aux(Au25) NCs to MOs by forming a tandem charge-transfer chain, hence endowing the multilayered MO/(PDDA-Aux)n heterostructures with significantly boosted photoelectrochemical water oxidation performance under light irradiation. The unanticipated role of PDDA as a cascade charge mediator is demonstrated to be universal. Our work would unlock the potential charge-transport capability of nonconjugated polymers as a novel charge mediator for solar-to-chemical conversion.

Maneuvering Intrinsic Instability of Metal Nanoclusters for Boosted Solar-Powered Hydrogen Production.

Atomically precise metal nanoclusters (NCs) have recently been unleashed as novel photosensitizers but inevitably suffer from light-induced self-transformation to metal nanocrystals (NYs), leading to substantially reduced photoredox activities. Herein, we conceptually demonstrate how to manipulate the intrinsic instability of metal NCs for smartly crafting long-range cascade charge transfer chain assisted by an ultrathin poly(dialyldimethylammonium chloride) (PDDA) layer that was intercalated at the interface of metal NCs and semiconductor. The unidirectional electron flow endowed by Schottky-type self-transformed metal NYs and unexpected electron-withdrawing capability of PDDA layer concurrently foster the charge transfer cascade, resulting in the markedly enhanced net efficiency of photocatalytic hydrogen evolution performances under visible light irradiation. Our work opens new frontiers for judiciously harnessing the inherent detrimental instability of metal NCs for boosted charge transfer toward solar-to-hydrogen conversion.

General Layer-by-Layer Assembly of Multilayered Photoanodes: Triggering Tandem Charge Transport toward Photoelectrochemical Water Oxidation.

Modulation of photoinduced charge separation/migration and construction of controllable charge transfer pathway over photoelectrodes have been attracting enduring interest in semiconductor-based photoelectrochemical (PEC) cells but suffer from sluggish charge transport kinetics. Here, we report a general approach to fabricate NP-TNTAs/(TMCs QDs/PSS)n (X = Te, Se, S) photoanodes via a facile and green electrostatic layer-by-layer (LbL) self-assembly strategy, for which transition-metal chalcogenides quantum dots (TMCs QDs) [CdX (X = Se, Te, S)] and poly(sodium 4-styrenesulfonate) (PSS) were periodically deposited on the nanoporous TiO2 nanotube arrays (NP-TNTAs) via substantial electrostatic force, resulting in the continuous charge transfer pathway. NP-TNTAs/(TMCs QDs/PSS)n photoanodes demonstrate significantly enhanced solar-driven photoelectrochemical (PEC) water oxidation activities, relative to NP-TNTAs and TMCs QDs under visible and simulated sunlight irradiation, predominantly because of the suitable energy level configuration between NP-TNTAs and TMCs QDs, unique integration mode, and high-speed interfacial charge separation rate endowed by LbL assembly. The ultrathin PSS intermediate layer functions as "molecule glue" for pinpoint and uniform self-assembly of TMCs QDs on the framework of NP-TNTAs and photosensitization effect of TMCs QDs triggers the unidirectional charge transfer cascade, synergistically boosting the charge separation/transfer efficiency. Our work offers an efficacious approach to craft multilayered photoelectrodes and spur further interest in finely tuning the spatial charge flow in PEC cell for solar-to-hydrogen conversion.