ABSTRACT
Interfacial Lewis acid-base pairs are commonly found in ZrO2-supported metal catalysts due to the facile generation of oxygen vacancies of ZrO2. These pairs have been reported to play a crucial role in olefin hydroesterification, especially in the absence of acid promoters and ligands. In this study, a series of ZrO2-supported Ru catalysts with ruthenium(iii) chloride and ruthenium(iii) acetylacetonate as precursors were prepared for the styrene hydroesterification. The catalysts were thoroughly characterized by TPR, TEM, EPR, XPS, and FTIR. The Ru precursors significantly influenced the size and electronic properties of Ru clusters, albeit having minimal impact on oxygen vacancies. Mechanistic studies of styrene hydroesterification over ZrO2-supported Ru catalysts revealed that the carbon monoxide insertion followed the hydrogen transfer step to activated styrene. Higher activity is exhibited over ZrO2-supported Ru catalysts prepared with ruthenium(iii) chloride as a precursor, attributed to the lower adsorption strength of CO over Ru clusters, as evidenced by FTIR and DFT calculations.
ABSTRACT
We report, for the first time, a new synthetic strategy for the preparation of crystalline two-dimensional olefin-linked covalent organic frameworks (COFs) based on aldol condensation between benzodifurandione and aromatic aldehydes. Olefin-linked COFs can be facilely crystallized through either a pyridine-promoted solvothermal process or a benzoic anhydride-mediated organic flux synthesis. The resultant COF leaf with high in-plane π-conjugation exhibits efficient visible-light-driven photoreduction of carbon dioxide (CO2) with water (H2O) in the absence of any photosensitizer, sacrificial agents, or cocatalysts. The production rate of carbon monoxide (CO) reaches as high as 158.1 µmol g-1 h-1 with near 100% CO selectivity, which is accompanied by the oxidation of H2O to oxygen. Both theoretical and experimental results confirm that the key lies in achieving exceptional photoinduced charge separation and low exciton binding. We anticipate that our findings will facilitate new possibilities for the development of semiconducting COFs with structural diversity and functional variability.
ABSTRACT
Electrocatalytic carbonylation of CO and CH3OH to dimethyl carbonate (DMC) on metallic palladium (Pd) electrode offers a promising strategy for C1 valorization at the anode. However, its broader application is limited by the high working potential and the low DMC selectivity accompanied with severe methanol self-oxidation. Herein, our theoretical analysis of the intermediate adsorption interactions on both Pd0 and Pd4+ surfaces revealed that inevitable reconstruction of Pd surface under strongly oxidative potential diminishes its CO adsorption capacity, thus damaging the DMC formation. Further theoretical modeling indicates that doping Pd with Cu not only stabilizes low-valence Pd in oxidative environments but also lowers the overall energy barrier for DMC formation. Guided by this insight, we developed a facile two-step thermal shock method to prepare PdCu alloy electrocatalysts for DMC. Remarkably, the predicted Pd3Cu demonstrated the highest DMC selectivity among existing Pd-based electrocatalysts, reaching a peaked DMC selectivity of 93 % at 1.0â V versus Ag/AgCl electrode. (Quasi) in situ spectra investigations further confirmed the predicted dual role of Cu dopant in promoting Pd-catalyzed DMC formation.
ABSTRACT
(1) Background: Particulate methane monooxygenase (pMMO) has a strong dependence on the natural electron transfer path and is prone to denaturation, which results in its redox activity centers being unable to transfer electrons with bare electrodes directly and making it challenging to observe an electrochemical response; (2) Methods: Using methanobactin (Mb) as the electron transporter between gold electrodes and pMMO, a bionic interface with high biocompatibility and stability was created. The Mb-AuNPs-modified functionalized gold net electrode as a working electrode, the kinetic behaviors of pMMO bioelectrocatalysis, and the effect of Mb on pMMO were analyzed. The CV tests were performed at different scanning rates to obtain electrochemical kinetics parameters. (3) Results: The values of the electron transfer coefficient (α) and electron transfer rate constant (ks) are relatively large in test environments containing only CH4 or O2. In contrast, in the test environment containing both CH4 and O2, the bioelectrocatalysis of pMMO is a two-electron transfer process with a relatively small α and ks; (4) Conclusions: It was inferred that Mb formed the complex with pMMO. More importantly, Mb not only played a role in electron transfer but also in stabilizing the enzyme structure of pMMO and maintaining a specific redox state. Furthermore, the continuous catalytic oxidation of natural substrate methane was realized.
Subject(s)
Gold , Imidazoles , Metal Nanoparticles , Oligopeptides , Oxygenases , Gold/chemistry , Copper/chemistry , Metal Nanoparticles/chemistry , Oxidation-Reduction , Minerals , Methane/chemistry , ElectrodesABSTRACT
We herein report the iridium-catalyzed enantioselective C-H borylation of aryl chlorides. A variety of prochiral biaryl compounds could be well-tolerated, affording a vast array of axially chiral biaryls with high enantioselectivities. The current method exhibits a high turnover number (TON) of 7000, which represents the highest in functional-group-directed asymmetric C-H activation. The high TON was attributed to a weak catalyst-substrate interaction that was caused by mismatched chirality between catalyst and substrate. We also demonstrated the synthetic application of the current method by C-B, ortho-C-H, and C-Cl bond functionalization, including programmed Suzuki-Miyaura coupling for the synthesis of axially chiral polyarenes.
ABSTRACT
In this study, starch ferulate was synthesized employing a mechanoenzymatic method, specifically based on the twin screw extrusion technique and lipase catalysis. The research then primarily centered on optimizing process parameters and conducting structural analysis. Optimal conditions were determined to be 8.2% ferulic acid addition, 66 °C extrusion temperature, and 3.2% lipase (N435) addition. The enzyme-catalyzed time was 30 s. The degree of substitution for starch ferulate was quantified at 0.005581 under these specific conditions. The presence of C=O bonds in the synthesized starch ferulate proved that the synthesis process was efficient. Additionally, the crystal structure underwent reconstruction. Observations through Scanning Electron Microscopy (SEM) and Confocal Laser Scanning Microscopy (CLSM) demonstrated that the mechanoenzymatic method led to an augmentation in the specific surface area of starch molecules, thereby facilitating the exposure of active sites. This breakthrough underscores the vast potential of mechanoenzymatic techniques to revolutionize the rapid and sustainable synthesis of starch ferulate, marking a pioneering stride in ester synthesis. The insights garnered from this study transcend theory, offering a visionary roadmap for the development and real-world deployment of advanced modified starch esters.
ABSTRACT
Ferulic acid (FA) is a natural antibacterial agent rich in plants, FA has excellent antioxidant and antibacterial properties. However, because of its short alkane chain and large polarity, FA is difficult to penetrate the soluble lipid bilayer in the biofilm to enter the cell to play an inhibitory role, limiting its biological activity. To improve the antibacterial activity of FA, with the catalytic condition of Novozym 435, four alkyl ferulic acid esters (FCs) with different alkyl chain lengths were obtained by fatty alcohols (including 1-propanol (C3), 1-hexanol (C6), nonanol (C9), and lauryl alcohol (C12)) modification. The effect of FCs on P. aeruginosa was determined by Minimum inhibitory concentrations (MIC), minimum bactericidal concentrations (MBC), Growth curves, alkaline phosphatase (AKP) activity, crystal violet method, scanning electron microscopy (SEM), membrane potential, PI, cell contents leakage. Results showed that the antibacterial activity of FCs increased after esterification, and the antibacterial activity significantly increased and then decreased with the extension of the alkyl chain of the FCs. Hexyl ferulate (FC6) showed the best antibacterial activities against E. coli and P. aeruginosa (MIC for E. coli was 0.5 mg/ml, MIC for P. aeruginosa was 0.4 mg/ml). And Propyl ferulate (FC3) and FC6 showed the best antibacterial activities S. aureus and B. subtilis (MIC for S. aureus was 0.4 mg/ml, The MIC of B. subtilis was 1.1 mg/ml). In addition, the growth, AKP activity, bacterial biofilm, bacterial cell morphology, membrane potential and cell contents leakage of P. aeruginosa after different FCs were investigated, which found that FCs could damage the cell wall of P. aeruginosa and showed different effects on the P. aeruginosa cell biofilm. FC6 showed the best inhibition on the biofilm formation of P. aeruginosa cells, which caused the surface of P. aeruginosa cells to be rough and wrinkled. Some P. aeruginosa cells showed aggregation and adhesion, even rupture. The membrane hyperpolarization was obvious, which appeared as holes, leading to cell contents leakage (protein and nucleic acid). All these results concluded that the antibacterial activities FCs against foodborne pathogens depended on different fatty alcohol esterification of FA. FC6 showed the best inhibition on P. aeruginosa due to its effect on P. aeruginosa cell walls and biofilms and the leak of the cell contents. This study provides more practical methods and a theoretical basis for giving full play to the bacteriostatic effect of plant FA.
ABSTRACT
In this study, the mechanism of ultrasound combined with corn starch granules (CSG) treatment improved the foam properties of whey protein isolates (WPI) and was systematically investigated. The results showed that ultrasound combined with corn starch granules treatment increased foam capacity and stability by 15.38% and 41.40%, respectively. Compared with the control group, corn starch granules enhanced the surface charge (52.38%) and system turbidity (51.43%), which certainly provided the necessary conditions for the improvement of foam stabilization stability. In addition, corn starch granules as microgel particles increased the mechanical properties of the interfacial protein film, thus delaying the instability of foam. This research would provide new insights into the design of new protein-based foam foods in the future food industry.
ABSTRACT
Manganese-catalyzed C-H bond functionalization of aryl amidines for the synthesis of 1-aminoisoquinolines in the presence of vinylene carbonate has been developed. The reaction features a broad substrate scope and proceeds under mild reaction conditions with only the carbonate anion as the byproduct.
ABSTRACT
An asymmetric transfer hydrogenation (ATH) of quinolines in water or biphasic systems was developed. This ATH reaction proceeds smoothly without the need for inert atmosphere protection in the presence of a water-soluble iridium catalyst, which bears an easily available aminobenzimidazole ligand. This ATH system can work at a catalyst loading of 0.001 mol % (S/C = 100â¯000, turnover number (TON) of up to 33â¯000) under mild reaction conditions. The turnover frequency (TOF) value can reach as high as 90â¯000 h-1. A variety of quinoline and N-heteroaryl compounds are transformed into the desired products in high yield and up to 99% enantiomeric excess (ee).
ABSTRACT
The carbonylation reaction is an effective way to introduce CO or other carbonyl groups into organic compounds, and widely used in the preparation of aldehydes, ketones, amides, and esters. The replacement of conventional reaction approaches by greener electrochemical methods is appealing with great synthetic potential as well as inherent safety, owing to the avoidance of external oxidants or reductants and a more facile control in product selectivity. In this minireview, we give a summary of the recent development of carbonylation reactions via the electrochemical approach.
ABSTRACT
Polyoxymethylene diethyl ethers (PODEEn) are oxygenated fuel additives with high performance due to their advantageous fuel properties. PODEEn can alleviate carbon debt as the production can utilize bioethanol and biomass syngas. Heterogeneous solid acid catalysts are desirable for an efficient PODEEn synthesis. In this study, well-defined sulfonated phthalocyanine-containing polymers were prepared, and the physicochemical properties were analyzed, exhibiting a 2D π-π stacking structure with crystalline-amorphous mixed phases. Owing to the tuning defects of the COF framework by mixing polymerization, the accessibility of the network and the capacity of strong acid were improved for the polymeric catalyst, showing an excellent activity with trioxane (TOX) conversion of 89% and PODEE2-8 selectivity of 87% at 80 °C under atmospheric pressure.
ABSTRACT
Central-to-axial chirality transfer via C-N single bond oxidation was first achieved as a versatile and conceptually distinct strategy to prepare a new family of axially chiral heteroaromatic biaryl backbones and P,N-ligands (named as Quinoxalinaps) in gram scale. Two atropisomers of Quinoxalinaps (ee >99%) were readily accessed from the same precursor enantiomer by a simple dehydrogenative oxidation with MnO2 and t-BuOOH under mild conditions. Phosphine could be introduced into the ligands before or after the chirality control process. Moreover, these Quinoxalinap P,N-ligands performed well for both asymmetric reactions of the CuBr-catalyzed alkyne conjugate addition with up to -94% ee and AgOAc-catalyzed glycinate imine [3 + 2] annulation with 90% ee, respectively.
ABSTRACT
An unprecedented and general titanium-catalyzed boration of alkyl (pseudo)halides (alkyl-X, X=I, Br, Cl, OMs) with borane (HBpin, HBcat) is reported. The use of titanium catalyst can successfully suppress the undesired hydrodehalogenation products that prevail using other transition-metal catalysts. A series of synthetically useful alkyl boronate esters are readily obtained from various (primary, secondary, and tertiary) alkyl electrophiles, including unactivated alkyl chlorides, with tolerance of other reducing functional groups such as ester, alkene, and carbamate. Preliminary studies on the mechanism revealed a possible radical reaction pathway. Further extension of our strategy to aryl bromides is also demonstrated.
ABSTRACT
A novel intramolecular Smiles rearrangement of α-fluoro-ß-keto-pyrimidylsulfones (usually used as a carbon nucleophile) was developed, providing a versatile avenue for synthesis of tri/tetra-substituted monofluorinated pyrimidyl enol ethers. Among these, diverse (Z)-monofluorovinylsulfones and sulfinates were efficiently assembled by adding extra electrophile and fine-tuning reaction conditions. The process is triggered by a keto-enol tautomerism from enol oxyanion to pyrimidine 2-carbon, completely different from the classical carbon nucleophilic addition reaction approach.
ABSTRACT
Herein, by applying visible-light photoredox catalysis, we have now achieved the first example of catalytic dehydrogenative coupling of phosphines and thiophenols that proceeds at room temperature. Key to our success is the use of benzaldehyde as a soft oxidant, which avoids the issue of phosphine oxidation. Furthermore, we observed the unexpected dealkylative coupling of secondary and tertiary alkylphosphine with thiophenols.
ABSTRACT
Amides are versatile synthetic building blocks and their selective transformations into highly valuable functionalities are much desirable in the chemical world. However, the diverse structure and generally high stability of amides make their selective transformations challenging. Here we disclose a chemodivergent transformation of primary, secondary and tertiary amides by using 1,1-diborylalkanes as pro-nucleophiles. In general, selective B-O elimination occurs for primary, secondary amides and tertiary lactams to generate enamine intermediate, while tertiary amides undergo B-N elimination to generate enolate intermediate. Various in situ electrophilic trapping of those intermediates allows the chemoselective synthesis of α-functionalized ketones, ß-aminoketones, enamides, ß-ketoamides, γ-aminoketones, and cyclic amines from primary, secondary, tertiary amides and lactams. The key for these transformations is the enolization effect after the addition of α-boryl carbanion to amides.
ABSTRACT
Ortho-selective aromatic C-H functionalization is frequently used in organic synthesis and chemical/pharmaceutical industries. However, this reaction relies heavily on the use of directing groups suffering from limited substrate scope and extra steps to put on and remove the directing/protecting groups. Herein we present the previously neglected concept that enables good to nearly complete selective ortho position. Proton transfer was utilized to tune the electron density on the aryl ring and determine the positional selectivity of electrophilic substitution. Consistently with deuteration experiments and DFT studies, this work demonstrates that acid-promoted proton transfer directs accelerated ortho-selective halogenation of NH/OH contained aromatic amines/phenols with excellent selectivity (>40 examples; up to 98:2 ortho/para selectivity). The application potential of this Fe-catalyzed method is demonstrated by the convenient synthesis of three alkaloids and tizanidine. This report raises the possibility that proton transfer could serve as the basis of developing new selective C-H functionalization reactions.
ABSTRACT
A general and atom-economical synthesis of 1,1-diborylalkanes from alkenes and a borane without the need for an additional H2 acceptor is reported for the first time. The key to our success is the use of an earth-abundant zirconium-based catalyst, which allows a balance of self-contradictory reactivities (dehydrogenative boration and hydroboration) to be achieved. Our method avoids using an excess amount of another alkene as an H2 acceptor, which was required in other reported systems. Furthermore, substrates such as simple long-chain aliphatic alkenes that did not react before also underwent 1,1-diboration in our system. Significantly, the unprecedented 1,1-diboration of internal alkenes enabled the preparation of 1,1-diborylalkanes.