High voltage spinel LiMn1.5Ni0.5O4 (LMNO) is a promising energy storage material for the next generation lithium batteries with high energy densities. However, due to the major controversies in synthesis, structure, and interfacial properties of LMNO, its unsatisfactory performance is still a challenge hindering the technology's practical applications. Herein, this paper provides general characteristics of LiMn1.5Ni0.5O4 such as spinel structure, electrochemical properties, and phase transition. In addition, factors such as electrolyte decomposition and morphology of LMNO that influence the electrochemical performances of LMNO are introduced. The strategies that enhance the electrochemical performances including coating, doping, electrolytes, and oxygen deficiency are comprehensively discussed. Through the discussion of the present research status and presentation of our perspectives on future development, we provide the rational design of LMNO in realizing lithium-ion batteries with improved electrochemical performances.
Commonly-used ether and carbonate electrolytes show distinct advantages in active lithium-metal anode and high-voltage cathode, respectively. While these complementary characteristics hold promise for energy-dense lithium metal batteries, such synergy cannot be realized solely through physical blending. Herein, a linear functionalized solvent, bis(2-methoxyethyl) carbonate (BMC), is conceived by intramolecularly hybridizing ethers and carbonates. The integration of the electron-donating ether group with the electron-withdrawing carbonate group can rationalizes the charge distribution, imparting BMC with notable oxidative/reductive stability and relatively weak solvation ability. Furthermore, BMC also offers advantages including the ability to slightly dissolve LiNO3, excellent thermostability and nonflammability. Consequently, the optimized BMC-based electrolyte, even with typical concentrations in the single solvent, demonstrates high-voltage tolerance (4.4 V) and impressive Li plating/stripping Coulombic efficiency (99.4%). Moreover, it fulfills practical lithium metal batteries with satisfactory cycling performance and exceptional tolerance towards thermal/mechanical abuse, showcasing its suitability for safe high-energy lithium metal batteries.
The practical application of microsized anodes is hindered by severe volume changes and fast capacity fading. Herein, we propose a gradient composite strategy and fabricate a silicon suboxide-based composite anode (d-SiO@SiOx/C@C) consisting of a disproportionated microsized SiO inner core, a homogeneous composite SiOx/C interlayer (x ≈ 1.5), and a highly graphitized carbon outer layer. The robust SiOx/C interlayer can realize a gradient abatement of stress and simultaneously connect the inner SiO core and carbon outer layer through covalent bonds. As a result, d-SiO@SiOx/C@C delivers a specific capacity of 1023 mAh/g after 300 cycles at 1 A/g with a retention of >90% and an average Coulombic efficiency of >99.7%. A full cell assembled with a LiNi0.8Co0.15Al0.05O2 cathode displays a remarkable specific energy density of 569 Wh/kg based on total active materials as well as excellent cycling stability. Our strategy provides a promising alternative for designing structurally and electrochemically stable microsized anodes with high capacity.
Biomass-derived porous carbon materials are meaningful to employ as a hard carbon precursor for anode materials of sodium-ion batteries (SIBs) from a sustainability perspective. Here, a straightforward approach is proposed to develop rich closed pores in pinenut-derived carbon, with the aim of improving Na+ plateau storage by adjusting the pyrolysis temperature. The optimized sample, namely the pinenut-derived carbon at 1300 °C, demonstrates remarkable reversible specific capacity of 278 mAh g-1, along with a high initial Coulomb efficiency of 85% and robust cycling stability (with a capacity retention of 89% after 800 cycles at 0.2 A g-1). In situ and ex situ analyses unveil that the developed closed pores play a significant role in enhancing the plateau capacity, providing compelling evidence for the "adsorption-filling" mechanism. Moreover, the corresponding full-cell achieves a high energy density of 245.7 Wh kg-1 (based on the total weight of both electrode active materials) and exhibits outstanding rate capability (191.4 mAh g-1 at 3 A g-1).
Due to their uncontrollable assembly and crystallization process, the synthesis of mesoporous metal oxide single crystals remains a formidable challenge. Herein, we report the synthesis of single-crystal-like mesoporous Li2TiSiO5 by using soft micelles as templates. The key lies in the atomic-scale self-assembly and step-crystallization processes, which ensure the formation of single-crystal-like mesoporous Li2TiSiO5 microparticles via an oriented attachment growth mechanism under the confinement of an in-situ formed carbon matrix. The mesoporous Li2TiSiO5 anode achieves a superior rate capability (148 mAh g-1 at 5.0 A g-1) and outstanding long-term cycling stability (138 mAh g-1 after 3000 cycles at 2.0 A g-1) for lithium storage as a result of the ultrafast Li+ diffusion caused by penetrating mesochannels and nanosized crystal frameworks (5-10 nm). In comparison, bulk Li2TiSiO5 exhibits poor rate capability and cycle performance due to micron-scale diffusion lengths. This method is very simple and reproducible, heralding a new way of designing and synthesizing mesoporous single crystals with controllable frameworks and chemical functionalities.
Calcium-oxygen (Ca-O2) batteries can theoretically afford high capacity by the reduction of O2 to calcium oxide compounds (CaOx) at low cost1-5. Yet, a rechargeable Ca-O2 battery that operates at room temperature has not been achieved because the CaOx/O2 chemistry typically involves inert discharge products and few electrolytes can accommodate both a highly reductive Ca metal anode and O2. Here we report a Ca-O2 battery that is rechargeable for 700 cycles at room temperature. Our battery relies on a highly reversible two-electron redox to form chemically reactive calcium peroxide (CaO2) as the discharge product. Using a durable ionic liquid-based electrolyte, this two-electron reaction is enabled by the facilitated Ca plating-stripping in the Ca metal anode at room temperature and improved CaO2/O2 redox in the air cathode. We show the proposed Ca-O2 battery is stable in air and can be made into flexible fibres that are weaved into textile batteries for next-generation wearable systems.
Sodium-ion batteries (SIBs) have been regarded as promising candidates for large-scale energy storage system, and their electrochemical performance is determined by the cathode materials. Recently, the polyanion-type cathode Na4 Fe3 (PO4 )2 P2 O7 (NFPP) demonstrates decent performance, while there exists promotion space with respect to its cycle stability and rate capability. Herein, an entropy-enhanced Na4 Fe2.95 (NiCoMnMgZn)0.01 (PO4 )2 P2 O7 (HE-NFPP) cathode is proposed with improved rate performance (67.1 mAh g-1 at 50 C) and cycle performance (retention of 92.0% after 1000 cycles at 1 C). The enhancement of configuration entropy improves the structural stability of NFPP thermodynamically. In-situ XRD illustrates the sodium storage mechanism of HE-NFPP as an imperfect solid solution reaction driven by Fe2+ /Fe3+ redox with a low volume change of 4.0% (90.9% of NFPP). Through doping, the structure distortion and abrupt rearrangement are inhibited. Additionally, HE-NFPP and hard carbon (HC) are utilized to fabricate pouch cell that demonstrates an average working voltage of 3.0 V and a maximum energy density of 165 Wh kg-1 (based on the total mass of active materials). These results highlight the potential for enhancing the high-rate and long-cycle performance of NFPP as a promising cathode for SIBs through an entropy-enhanced multi-doping strategy.
Polymer-in-ceramic composite solid electrolytes (PIC-CSEs) provide important advantages over individual organic or inorganic solid electrolytes. In conventional PIC-CSEs, the ion conduction pathway is primarily confined to the ceramics, while the faster routes associated with the ceramic-polymer interface remain blocked. This challenge is associated with two key factors: (i) the difficulty in establishing extensive and uninterrupted ceramic-polymer interfaces due to ceramic aggregation; (ii) the ceramic-polymer interfaces are unresponsive to conducting ions because of their inherent incompatibility. Here, we propose a strategy by introducing polymer-compatible ionic liquids (PCILs) to mediate between ceramics and the polymer matrix. This mediation involves the polar groups of PCILs interacting with Li+ ions on the ceramic surfaces as well as the interactions between the polar components of PCILs and the polymer chains. This strategy addresses the ceramic aggregation issue, resulting in uniform PIC-CSEs. Simultaneously, it activates the ceramic-polymer interfaces by establishing interpenetrating channels that promote the efficient transport of Li+ ions across the ceramic phase, the ceramic-polymer interfaces, and the intervening pathways. Consequently, the obtained PIC-CSEs exhibit high ionic conductivity, exceptional flexibility, and robust mechanical strength. A PIC-CSE comprising poly(vinylidene fluoride) (PVDF) and 60 wt % PCIL-coated Li3Zr2Si2PO12 (LZSP) fillers showcasing an ionic conductivity of 0.83 mS cm-1, a superior Li+ ion transference number of 0.81, and an elongation of â¼300% at 25 °C could be produced on meter-scale. Its lithium metal pouch cells show high energy densities of 424.9 Wh kg-1 (excluding packing films) and puncture safety. This work paves the way for designing PIC-CSEs with commercial viability.
Solid-state electrolytes (SSEs) have attracted extensive interests due to the advantages in developing secondary batteries with high energy density and outstanding safety. Possessing high ionic conductivity and the lowest reduction potential among the state-of-the-art SSEs, the garnet type SSE is one of the most promising candidates to achieve high performance solid-state lithium batteries (SSLBs). However, the elastic modulus of the garnet electrolyte leads to deteriorated interfacial contacts, and the increasing in electronic conduction at either anode/garnet interface or grain boundary results in Li dendrite growth. Here, recent developments of the solid interfaces for the garnet electrolytes, including the strategies of Li dendrite suppression and interfacial chemical/electrochemical/mechanical stabilizations are presented. A new viewpoint of the double edges of interfacial lithiophobicity is proposed, and the rational design of the interphases, as well as effective stacking methods of the garnet-based SSLBs are summarized. Moreover, practical roles of the garnet electrolyte in SSLB industry are also discussed. This work delivers insights into the solid interfaces for the garnet electrolytes, which provides not only the promotion of the garnet-based SSLBs, but also a comprehensive understanding of the interfacial stabilization for the whole SSE family.
Direct use of metals as battery anodes could significantly boost the energy density, but suffers from limited cycling. To make the batteries more sustainable, one strategy is mitigating the propensity for metals to form random morphology during plating through orientation regulation, e.g., hexagonal Zn platelets locked horizontally by epitaxial electrodeposition or vertically aligned through Zn/electrolyte interface modulation. Current strategies center around obtaining (002) faceted deposition due to its minimum surface energy. Here, benefiting from the capability of preparing a library of faceted monocrystalline Zn anodes and controlling the orientation of Zn platelet deposits, we challenge this conventional belief. We show that while monocrystalline (002) faceted Zn electrode with horizontal epitaxy indeed promises the highest critical current density, the (100) faceted electrode with vertically aligned deposits is the most important one in suppressing Zn metal corrosion and promising the best reversibility. Such uniqueness results from the lowest electrochemical surface area of (100) faceted electrode, which intrinsically builds upon the surface atom diffusion barrier and the orientation of the pallets. These new findings based on monocrystalline anodes advance the fundamental understanding of electrodeposition process for sustainable metal batteries and provide a paradigm to explore the processing-structure-property relationships of metal electrodes.
Probing the chemistry and materials science of electrochemical energy materials is a central topic in both chemical physics and energy chemistry due to the increasingly important role of energy devices in the current and future energy system and industry. Especially, understanding the chemical physics of electrochemical energy materials is the key to enhance the performance of energy storage and conversion devices such as batteries, fuel cells, electrolyzers, and supercapacitors. This special topic focuses on the fundamental understanding of electrochemical energy applications, including electrochemistry fundamentals, structural dynamics and degradation mechanism of materials, optimization strategies for improving electrochemical performance of energy devices, and emerging simulation and characterization methods applied to advanced energy materials.
Problems of zinc anode including dendrite and hydrogen evolution seriously degrade the performance of zinc batteries. Solid electrolyte interphase (SEI), which plays a key role in achieving high reversibility of lithium anode in aprotic organic solvent, is also beneficial to performance improvement of zinc anode in aqueous electrolyte. However, various studies about interphase for zinc electrode is quite fragmented, and lack of deep understanding on root causes or general design rules for SEI construction. And water molecules with high reactivity brings serious challenge to the effective SEI construction. Here, we reviewed the brief development history of zinc batteries firstly, then summarized the approaches to construct SEI in aqueous electrolyte. Furthermore, the formation mechanisms behind approaches are systematically analyzed, together with discussion on the SEI components and evaluation on electrochemical performance of zinc anode with various types of SEI. Meanwhile, the challenge between lab and industrialization are also discussed.
Sodium (Na)-ion batteries (SIBs) have been considered as a potential device for large-scale energy storage. To date, some start-up companies have released their first-generation SIBs cathode materials. Among them, phosphate compounds, particularly iron (Fe)-based mixed phosphate compounds, present great potential for commercial SIBs owing to its low cost, environment friendly. In this perspective, a brief historical retrospect is first introduce to the development of Fe-based mixed phosphate cathodes in SIBs. Then, the recent development about this kind of cathode has been summarized. One of the iron-based phosphate materials, Na3 Fe2 (PO4 )P2 O7 , is used as an example to roughly calculate the energy density and estimate the cost at the cell level to highlight their advantages. Finally, some strategies are put up to further increase the energy density of SIBs. This timely perspective aims to educate the community on the critical benefits of the Fe-based mixed phosphate cathode and provide an up-to-date overview of this emerging field.
Ultrathin and super-toughness gel polymer electrolytes (GPEs) are the key enabling technology for durable, safe, and high-energy density solid-state lithium metal batteries (SSLMBs) but extremely challenging. However, GPEs with limited uniformity and continuity exhibit an uneven Li+ flux distribution, leading to nonuniform deposition. Herein, a fiber patterning strategy for developing and engineering ultrathin (16 µm) fibrous GPEs with high ionic conductivity (≈0.4 mS cm-1 ) and superior mechanical toughness (≈613%) for durable and safe SSLMBs is proposed. The special patterned structure provides fast Li+ transport channels and tailoring solvation structure of traditional LiPF6 -based carbonate electrolyte, enabling rapid ionic transfer kinetics and uniform Li+ flux, and boosting stability against Li anodes, thus realizing ultralong Li plating/stripping in the symmetrical cell over 3000 h at 1.0 mA cm-2 , 1.0 mAh cm-2 . Moreover, the SSLMBs with high LiFePO4 loading of 10.58 mg cm-2 deliver ultralong stable cycling life over 1570 cycles at 1.0 C with 92.5% capacity retention and excellent rate capacity of 129.8 mAh g-1 at 5.0 C with a cut-off voltage of 4.2 V (100% depth-of-discharge). Patterned GPEs systems are powerful strategies for producing durable and safe SSLMBs.
Stacking order plays a key role in defining the electrochemical behavior and structural stability of layer-structured cathode materials. However, the detailed effects of stacking order on anionic redox in layer-structured cathode materials have not been investigated specifically and are still unrevealed. Herein, two layered cathodes with the same chemical formula but different stacking orders: P2-Na0.75 Li0.2 Mn0.7 Cu0.1 O2 (P2-LMC) and P3-Na0.75 Li0.2 Mn0.7 Cu0.1 O2 (P3-LMC) are compared. It is found that P3 stacking order is beneficial to improve the oxygen redox reversibility compared with P2 stacking order. By using synchrotron hard and soft X-ray absorption spectroscopies, three redox couples of Cu2+ /Cu3+ , Mn3.5+ /Mn4+ , and O2- /O- are revealed to contribute charge compensation in P3 structure simultaneously, and two redox couples of Cu2+ /Cu3+ and O2- /O- are more reversible than those in P2-LMC due to the higher electronic densities in Cu 3d and O 2p orbitals in P3-LMC. In situ X-ray diffraction reveals that P3-LMC exhibits higher structural reversibility during charge and discharge than P2-LMC, even at 5C rate. As a result, P3-LMC delivers a high reversible capacity of 190.3 mAh g-1 and capacity retention of 125.7 mAh g-1 over 100 cycles. These findings provide new insight into oxygen-redox-involved layered cathode materials for SIBs.
Implantable devices on the tumor tissue as a local treatment are able to work in situ, which minimizes systemic toxicities and adverse effects. Here, we demonstrated an implantable self-charging battery that can regulate tumor microenvironment persistently by the well-designed electrode redox reaction. The battery consists of biocompatible polyimide electrode and zinc electrode, which can consume oxygen sustainably during battery discharge/self-charge cycle, thus modulating hypoxia level in tumor microenvironment. The oxygen reduction in battery leads to the formation of reactive oxygen species, showing 100% prevention on tumor formation. Sustainable consumption of oxygen causes adequate intratumoral hypoxic conditions over the course of 14 days, which is helpful for the hypoxia-activated prodrugs (HAPs) to kill tumor cells. The synergistic effect of the battery/HAPs can deliver more than 90% antitumor rate. Using redox reactions in electrochemical battery provides a potential approach for the tumor inhibition and regulation of tumor microenvironment.
Neoplasms , Prodrugs , Humans , Neoplasms/pathology , Hypoxia , Oxygen , Prodrugs/pharmacology , Prodrugs/therapeutic use , Water , Tumor Microenvironment
Lithium-rich antiperovskites (LiRAPs) solid electrolytes have attracted extensive interest due to their advantages of structural tunability, mechanical flexibility, and low cost. However, LiRAPs are instinctively hygroscopic and suffer from decomposition in air, which not only diversifies their electrochemical performances in present reports but also hinders their application in all-solid-state lithium batteries (ASSLBs). Herein, the origin of the hygroscopicity, and also the effect of the hygroscopicity on the electrochemical performances of Li3-x (OHx )Cl are systematically investigated. Li3-x (OHx )Cl is demonstrated to be unstable in the air and prone to decompose into LiOH and LiCl. Nevertheless, with fluorine doping on chlorine sites, the hygroscopicity of LiRAPs is suppressed by weakening the intermolecular hydrogen bond between LiRAPs and H2 O, forming a moisture-resistive Li3-x (OHx )Cl0.9 F0.1 . Taking advantage of its low melting point (274 °C), two prototypes of ASSLBs are assembled in the ambient air by means of co-coating sintering and melt-infiltration. With LiRAPs as the solder, low-temperature sintering of the ASSLBs with low interfacial resistance is demonstrated as feasible. The understanding of the hygroscopic behavior of LiRAPs and the integration of the moisture-resistive LiRAPs with ASSLBs provide an effective way toward the fabrication of the ASSLBs.
Nano and single-atom catalysis open new possibilities of producing green hydrogen (H2 ) by water electrolysis. However, for the hydrogen evolution reaction (HER) which occurs at a characteristic reaction rate proportional to the potential, the fast generation of H2 nanobubbles at atomic-scale interfaces often leads to the blockage of active sites. Herein, a nanoscale grade-separation strategy is proposed to tackle mass-transport problem by utilizing ordered three-dimensional (3d) interconnected sub-5â nm pores. The results reveal that 3d criss-crossing mesopores with grade separation allow efficient diffusion of H2 bubbles along the interconnected channels. After the support of ultrafine ruthenium (Ru), the 3d mesopores are on a superior level to two-dimensional system at maximizing the catalyst performance and the obtained Ru catalyst outperforms most of the other HER catalysts. This work provides a potential route to fine-tuning few-nanometer mass transport during water electrolysis.
Nowadays, electrolytes for commercial batteries are mostly liquid solutions composed of solvent and salt to migrate the ions. However, solvents of the electrolyte bring several inherent limitations, either the electrochemical window, working temperature, volatility or flammability. Herein, we report polyphosphoric acid as a solvent-free protic liquid electrolyte, which excludes the demerits of solvent and exhibits unprecedented superiorities, including nonflammability, wider electrochemical stability window (>2.5 V) than aqueous electrolyte, low volatility and wide working temperature range (>400 °C). The proton conductive electrolyte enables MoO3/LiVPO4F rocking-chair battery to operate well in a wide temperature range from 0 °C to 250 °C and deliver a high power density of 4975 W kg-1 at a high temperature of 100 °C. The solvent-free electrolyte could provide a viable route for the stable and safe batteries working under harsh conditions, opening up a route towards designing wide-temperature electrolytes.
The high interfacial resistance and lithium (Li) dendrite growth are two major challenges for solid-state Li batteries (SSLBs). The lack of understanding on the correlations between electronic conductivity and Li dendrite formation limits the success of SSLBs. Here, by diluting the electronic conductor from the interphase to bulk Li during annealing of the aluminium nitride (AlN) interlayer, we changed the interphase from mixed ionic/electronic conductive to solely ionic conductive, and from lithiophilic to lithiophobic to fundamentally understand the correlation among electronic conductivity, Li dendrite, and interfacial resistance. During the conversion-alloy reaction between AlN and Li, the lithiophilic and electronic conductive LixAl diffused into Li, forming a compact lithiophobic and ionic conductive Li3N, which achieved an ultrahigh critical current density of 2.6/14.0 mA/cm2 in the time/capacity-constant mode, respectively. The fundamental understanding on the effect of interphase nature on interfacial resistance and Li dendrite suppression will provide guidelines for designing high-performance SSLBs.
