ABSTRACT
The helical edge states (ESs) protected by underlying Z2 topology in two-dimensional topological insulators (TIs) arouse upsurges in saturable absorptions thanks to the strong photon-electron coupling in ESs. However, limited TIs demonstrate clear signatures of topological ESs at liquid nitrogen temperatures, hindering the applications of such exotic quantum states. Here, we demonstrate the existence of one-dimensional (1D) ESs at the step edge of the quasi-1D material Ta2NiSe7 at 78 K by scanning tunneling microscopy. Such ESs are rather robust against the irregularity of the edges, suggesting a possible topological origin. The exfoliated Ta2NiSe7 flakes were used as saturable absorbers (SAs) in an Er-doped fiber laser, hosting a mode-locked pulse with a modulation depth of up to 52.6% and a short pulse duration of 225 fs, far outstripping existing TI-based SAs. This work demonstrates the existence of robust 1D ESs and the superior SA performance of Ta2NiSe7.
ABSTRACT
The exotic optoelectronic properties of antimonene, including strain-induced tunable bandgaps, broad nonlinear refractive response, etc., have evoked profound upsurges for decades. As the screw dislocations break the crystal symmetry and modify interlayer coupling, it is highly desirable to investigate the optical prospects of antimonene with screw dislocations. Herein, controllable epitaxy of spiral ß-antimonene is achieved on Fe3GaTe2 substrates. By fine-tuning growth temperatures, the evolutions of spiral ß-antimonene with non-centrosymmetric stacking are investigated via scanning tunneling microscopy. The effects of interfacial strain and dislocation motion during screw-dislocation-driven growth are also studied. Additionally, a modulation depth of 40.8% and mode locking at 1558 nm with a pulse width of 290 fs are observed in Er-doped pulsed fiber lasers generated with spiral Sb-based saturable absorbers, revealing superior performance that far outstrips reported Sb-based saturable absorbers to date. Our work sheds light on the preparation of Sb films with screw dislocations and demonstrates a promising approach toward fabricating ultrafast optical devices.
ABSTRACT
In the realm of ultrafast laser technology, the exploration of two-dimensional materials as saturable absorbers (SA) has garnered significant research interest. Our research investigates the characteristics of SnTe thin films, a topological crystalline insulator material, as a potential saturable absorber for ultrafast lasers. Using the molecular beam epitaxy (MBE) technique, we analyze the films' morphology and composition through atomic force microscopy (AFM) and successfully deposit SnTe epilayers on Au(111)/mica substrates. Through the utilization of SnTe-SA, an erbium-doped fiber laser is fabricated, demonstrating a pulse output with a width of 276â fs and a center wavelength of 1560â nm, highlighting the potential of SnTe films in manufacturing ultrafast optical devices. Additionally, tightly bound solitons with a soliton interval of 1.01â ps are observed, contributing to the exploration of soliton nonlinear dynamics.
ABSTRACT
BACKGROUND: Ankylosing spondylitis (AS) is a chronic autoimmune arthritis that mainly affects spine joints. To date, the pathogenesis of AS remains unclear, although immune cells and innate immune response cytokines have been suggested to be crucial players. METHODS: By adopting a single-cell RNA sequencing approach in the AS cynomolgus model, we profiled and characterized PBMC proportions along disease progression. RESULTS: Here, our primary focus was on the activation of an immune cascade-initiating lymphocyte subtype known as CD4+CXCR5+ T follicular helper (Tfh) cells. These Tfhs demonstrated a localized residence in AS bone lesion as an ectopic lymphoid structure. Moreover, Tfhs would serve as an upstream initiator for a pro-angiogenic cascade. Then, an expansion in CD14+ monocytes and DC cells subsets resulted in enhanced expression of angiogenesis genes in these AS cynomolgus monkeys. With a confirmed higher abundance of TNF-α accompanying H-type vascular invasion in the osteophytic region, pronounced expansion of Tfhs at such lesion site signaling for monocytes and DCs intrusion is considered as the prelude to the characteristic angiogenic bony outgrowth in AS known as syndesmophytes. CONCLUSIONS: We explored the intimate relationship between local inflammation and bone formation in AS from the perspective of nascent vascularisation. Hence, our study lays the foundation for elucidating a unified AS pathogenesis through the immune-angiogenesis-osteogenesis axis.
Subject(s)
Macaca fascicularis , Neovascularization, Pathologic , Spondylitis, Ankylosing , Spondylitis, Ankylosing/immunology , Spondylitis, Ankylosing/genetics , Animals , Neovascularization, Pathologic/immunology , Humans , Monocytes/immunology , Disease Models, Animal , T Follicular Helper Cells/immunology , Osteogenesis/immunology , Male , Dendritic Cells/immunology , AngiogenesisABSTRACT
OBJECTIVES: This study aims to identify circulating proteins that are causally associated with osteoarthritis (OA)-related traits through Mendelian randomisation (MR)-based analytical framework. METHODS: Large-scale two-sample MR was employed to estimate the effects of thousands of plasma proteins on 12 OA-related traits. Additional analyses including Bayesian colocalisation, Steiger filtering analysis, assessment of protein-altering variants and mapping expression quantitative trait loci to protein quantitative trait loci were performed to investigate the reliability of the MR findings; protein-protein interaction, pathway enrichment analysis and evaluation of drug targets were conducted to deepen the understanding and identify potential therapeutic targets of OA. RESULTS: Dozens of circulating proteins were identified to have putatively causal effects on OA-related traits, and a majority of these proteins were either drug targets or considered druggable. CONCLUSIONS: Through MR analysis, we have identified numerous plasma proteins associated with OA-related traits, shedding light on protein-mediated mechanisms and offering promising therapeutic targets for OA.
Subject(s)
Osteoarthritis , Proteome , Humans , Bayes Theorem , Reproducibility of Results , Osteoarthritis/genetics , Blood Proteins/geneticsABSTRACT
Patients with a spinal cord injury (SCI) usually suffer lifelong disability as a result. Considering this, SCI treatment and pathology study are urgently needed. Metformin, a widely used hypoglycemic drug, has been indicated for its important role in central nervous system diseases. This study aimed to investigate the potential effect of metformin on remyelination after SCI. In the present study, we established a cervical contusion SCI model and metformin treatment was applied after SCI. Biomechanical parameters and behavioral assessment were used to evaluate the severity of injury and the improvement of functional recovery after SCI, respectively. The immunofluorescence and western blot were performed at the terminal time point. Our results showed that treating with metformin after SCI improved functional recovery by reducing the white matter loss and promoting Schwann cell remyelination, and the Nrg1/ErbB signaling pathway may be involved in promoting remyelination mediated by oligodendrocytes and Schwann cells. In addition, the area of spared tissues was significantly increased in the metformin group. However, metformin had no significant effects on the glial scar and inflammation after SCI. In summary, these findings indicated that the role of metformin in Schwann cell remyelination after SCI was probably related to the regulation of the Nrg1/ErbB pathway. It is, therefore, possible to suggest that metformin may be a potential therapy for SCI.
Subject(s)
Metformin , Remyelination , Spinal Cord Injuries , Humans , Remyelination/physiology , Metformin/therapeutic use , Metformin/metabolism , Metformin/pharmacology , Spinal Cord Injuries/drug therapy , Spinal Cord Injuries/pathology , Schwann Cells/metabolism , Schwann Cells/pathology , Oligodendroglia/pathology , Spinal Cord/metabolism , Recovery of Function/physiologyABSTRACT
Enhanced second-harmonic generation (SHG) responses are reported in monolayer transition metal dichalcogenides (e.g., MX2 , M: Mo, W; X: S, Se) due to the broken symmetries. The 3R-like stacked MX2 spiral structures possessing the similar broken inversion symmetry should present dramatically enhanced SHG responses, thus providing great flexibility in designing miniaturized on-chip nonlinear optical devices. To achieve this, the first direct synthesis of twisted 3R-stacked chiral molybdenum diselenide (MoSe2 ) spiral structures with specific screw dislocations (SD) arms is reported, via designing a water-assisted chemical vapor transport (CVT) approach. The study also clarifies the formation mechanism of the MoSe2 spiral structures, by precisely regulating the precursor supply accompanying with multiscale characterizations. Significantly, an up to three orders of magnitude enhancement of the SHG responses in twisted 3R stacked MoSe2 spirals is demonstrated, which is proposed to arise from the synergistic effects of broken inversion symmetry, strong light-matter interaction, and band nesting effects. Briefly, the work provides an efficient synthetic route for achieving the 3R-stacked TMDCs spirals, which can serve as perfect platforms for promoting their applications in on-chip nonlinear optical devices.
ABSTRACT
The bulk-boundary correspondence is a critical concept in topological quantum materials. For instance, a quantum spin Hall insulator features a bulk insulating gap with gapless helical boundary states protected by the underlying Z2 topology. However, the bulk-boundary dichotomy and distinction are rarely explored in optical experiments, which can provide unique information about topological charge carriers beyond transport and electronic spectroscopy techniques. Here, we utilize mid-infrared absorption micro-spectroscopy and pump-probe micro-spectroscopy to elucidate the bulk-boundary optical responses of Bi4Br4, a recently discovered room-temperature quantum spin Hall insulator. Benefiting from the low energy of infrared photons and the high spatial resolution, we unambiguously resolve a strong absorption from the boundary states while the bulk absorption is suppressed by its insulating gap. Moreover, the boundary absorption exhibits strong polarization anisotropy, consistent with the one-dimensional nature of the topological boundary states. Our infrared pump-probe microscopy further measures a substantially increased carrier lifetime for the boundary states, which reaches one nanosecond scale. The nanosecond lifetime is about one to two orders longer than that of most topological materials and can be attributed to the linear dispersion nature of the helical boundary states. Our findings demonstrate the optical bulk-boundary dichotomy in a topological material and provide a proof-of-principal methodology for studying topological optoelectronics.
ABSTRACT
The development of sorbents for flue gas desulfurization in a dry mode is essential to control emission of sulfur dioxide. Based on the novel concept of "treating waste with waste", a low-cost and highly activated calcium-based sorbent (ACS) was prepared using coal fly ash, CaO and waste gypsum as the raw materials via the one-step incipient wetness impregnation method. Based on characterization using scanning electron microscopy and nitrogen adsorption-desorption, the ACS possessed a fibrous and netted structure with high porosity, which improved SO2 adsorption greatly. The SO2 adsorption capacity of ACS with coal fly ash/CaO/CaSO4 = 1/2/1 was high, up to 44.26 mg g-1, with 100% removal efficiency at 150 °C. In the absence of O2, SO2 was rapidly adsorbed on the sorbent to form CaSO3 according to in situ DRIFTS analysis, while when O2 was present in the flue gas, SO2/SO3 2- tended to be oxidized into SO4 2- species. Moreover, the presence of NO can further enhance the SO2 adsorption capacity of the ACS due to the formation of adsorbed NO2 or nitrate species with strong oxidizing properties. Therefore, the ACS can be considered as a sustainable sorbent with the advantage of employing fly ash for the removal of sulfur dioxide.
ABSTRACT
Background: Bone nonunion is a special fracture complication that occurs in about 5% to 10% of cases. This type of fracture is difficult to heal, and causes great pain to patients and affects their quality of life. The mechanism of bone nonunion is not clear. In our study, we investigated the influence of Toll-like receptor (TLR)-3, TLR-4, and Wnt signaling pathways on the occurrence of bone nonunion. Methods: Firstly, we established a Sprague Dawley (SD) rat model of femoral nonunion, and detected the expression levels of TLR-3, TLR-4, ß-catenin, nemo-like kinase (NLK), c-Jun N-terminal kinase (JNK), and other proteins during model construction. For in vitro experiments, primary cultured bone mesenchymal stem cells (BMSCs) were divided into 4 groups: lipopolysaccharide (LPS, agonist of TLR-4) group, LPS + CLI095 (inhibitor of TLR-4) group, control group, and LPS + substance P (SP) group. The expression of ß-catenin, NLK, JNK, and ALP and the osteogenic differentiation ability of cells were detected during culture. Results: X-ray and hematoxylin and eosin (HE) staining results confirmed the successful modeling of bone nonunion. During the formation of the bone nonunion model, the expression of TLR-4 showed an upward trend. In vitro experiment results showed that inhibition of TLR-4 expression could enhance the proliferation and differentiation ability of BMSCs. The expression of ß-catenin, the core protein of the canonical Wnt signaling pathway, increased rapidly in the first 2 weeks of bone nonunion construction, and decreased after 2 weeks. Non-canonical Wnt signaling pathway proteins NLK and JNK had no change in the first 2 weeks, and showed an upward trend after 2 weeks. In vitro experiment results showed that the expression of ß-catenin was dominant in BMSCs with strong proliferation and differentiation ability, while the expression of NLK and JNK was dominant in BMSCs with weak proliferation and differentiation ability. These results suggest that the Wnt signaling pathway may regulate the occurrence of bone nonunion. Conclusions: TLR-4 inhibits the proliferation and differentiation of BMSCs, and the transformation of the canonical Wnt signaling pathway to the non-canonical Wnt signaling pathway may lead to bone nonunion. Our study may provide new insights into the treatment of bone nonunion.
ABSTRACT
In this work, we reported a sensitive, label-free electrochemical biosensor based on the intrinsic topological insulator (TI) BiSbTeSe2 for potential application in the determination of the HIV gene. With strong spin-obit coupling, TIs could have robust surface states with low electronic noise, which might be beneficial for the stable and sensitive electron transport between the electrode and electrolyte interface. Under optimized conditions of the biosensors using BiSbTeSe2, the differential pulse voltammetry (DPV) peak currents showed a linear relationship with the logarithm of target DNA concentrations ranging from 1.0 × 10-13 to 1.0 × 10-7 M, with a detection limit of 1.07 × 10-15 M. The sensing assay also displayed good selectivity and stability after storage at 4 °C for 7 days. This work provides an effective way to develop biosensors with topological materials, which have a potential application in the clinical determination and monitoring field.
Subject(s)
Biosensing Techniques , HIV Infections , DNA , Electrochemical Techniques , Electrodes , HumansABSTRACT
Iatrogenic glucocorticoid (GC)-induced osteoporosis (GIO) is an idiosyncratic form of secondary osteoporosis. Genetic predisposition among individuals may give rise to variant degree of phenotypic changes but there has yet been a documented unified pathway to explain the idiosyncrasy. In this study, we argue that the susceptibility to epigenetic changes governing molecular cross talks along the BMP and PI3K/Akt pathway may underline how genetic background dictate GC-induced bone loss. Concordantly, osteoblasts from BALB/c or C57BL/6 neonatal mice were treated with dexamethasone for transcriptome profiling. Furthermore, we also confirmed that GC-pre-conditioned mesenchymal stem cells (MSCs) would give rise to defective osteogenesis by instigating epigenetic changes which affected the accessibility of enhancer marks. In line with these epigenetic changes, we propose that GC modulates a key regulatory network involving the scavenger receptor Cd36 in osteoblasts pre-conditioning pharmacological idiosyncrasy in GIO.
ABSTRACT
A time-reversal invariant two-dimensional (2D) topological insulator (TI) is characterized by the gapless helical edge states propagating along the perimeter of the system. However, the small band gap in the 2D TIs discovered so far hinders their applications. Recently, we predicted that single-layer Bi4Br4 is a 2D TI with a remarkable band gap and that α-Bi4Br4 crystals can host topological edge states at the step edges. Here we report the growth of α-Bi4Br4 nanowires with (102)-oriented top surfaces on the TiSe2 substrates and the direct observation of the predicted topological edge states at the step edges of the nanowires using scanning tunneling microscopy. The coupling between the edge states leads to the formation of surface states at the (102) top surfaces of the nanowires. Our work demonstrates the existence of topological edge states in α-Bi4Br4 and paves the way for developing α-Bi4Br4-based devices for a high-temperature quantum spin Hall effect.
ABSTRACT
When a topological insulator (TI) is brought to the proximity of a ferromagnetic insulator (FMI), the breaking of the time-reversal symmetry may give rise to quantum anomalous Hall effect (QAHE). The physical properties of such TI-FMI systems are greatly affected by the interfacial structures of the components. Here, we report the growth and structural properties of Bi(110) and Bi2Se3thin films on a FMI of Cr2Ge2Te6(CGT) substrate by scanning tunneling microscopy. We observed various defects and impurities on the CGT surfaces, which serve as the preferential sites for initial nucleation and epitaxial growth of Bi(110) thin films. The exposure of the as-grown Bi(110) thin films to Se vapor leads to the formation of polycrystalline Bi2Se3thin films with randomly distributed holes. The structure and composition of the as-prepared Bi2Se3thin films were further confirmed by Raman spectroscopy and x-ray photoelectron spectroscopy. Our work shows that the quality of the CGT crystals is vital for the growth of high-quality TIs on CGT substrates for QAHE.
ABSTRACT
The evolution of single-stranded DNA (ssDNA) assembly on octadecylamine (ODA) modified highly oriented pyrolytic graphite (HOPG) surface by heating and ultrasonic treatment has been studied for the first time. We have observed that DNA on the ODA coated HOPG surface underwent dramatic morphological changes as a function of heating and ultrasonic treatment. Ordered DNA firstly changed to random aggregates by heating and then changed to three-dimensional (3D) networks by ultrasonic treatment. This finding points to previously unknown factors that impact graphite-DNA interaction and opens new opportunities to control the deposition of DNA onto graphitic substrates. In this way, we built a cost-effective method to produce large-scale 3D ssDNA networks. All of these studies pave the way to understand the properties of DNA-solid interface, design novel nanomaterials, and improve the sensitivity of DNA biosensors.
Subject(s)
Amines/chemistry , DNA, Single-Stranded/chemistry , Graphite/chemistry , Adsorption , Biosensing Techniques , Heating , Nanostructures , Nucleic Acid Conformation , Surface Properties , UltrasonicsABSTRACT
The aim of this study was to inhibit adipogenic differentiation by transfecting two growth factors, platelet-derived growth factor (PDGF-BB) and bone morphogenic protein 2 (BMP-2), into modified rat bone marrow mesenchymal stem cells (rBMSCs) and then compounded with platelet-rich plasma (PRP). To achieve rBMSCs, the osteoporosis model of rats was established, and then the rBMSCs from the rats were isolated and identified. Co-transfection of rBMSCs with PDGF-BB-GFP and BMP-2 and detection of PDGF-BB/BMP-2 expression in transfected BMSCs was assessed by qRT-PCR and western blot, respectively. Moreover, the effect of the two growth factors transfection of rBMSCs on adipogenic differentiation was evaluated by oil red O staining and western blot, respectively. Finally, construction of the two growth factors transfection of rBMSCs compounded with PRP and detection of adipogenic differentiation were assessed by oil red O staining, CCK-8, and western blot, respectively. In vitro studies revealed that the two growth factors transfection of rBMSCs compounded with PRP promoted cell viability and inhibited adipogenic differentiation and could be promising for inhibiting adipogenic differentiation.
Subject(s)
Animals , Rats , Cell Differentiation , Adipose Tissue/cytology , Platelet-Rich Plasma , Bone Morphogenetic Protein 2/genetics , Mesenchymal Stem Cells/cytology , Becaplermin/genetics , Transfection , Cells, CulturedABSTRACT
The aim of this study was to inhibit adipogenic differentiation by transfecting two growth factors, platelet-derived growth factor (PDGF-BB) and bone morphogenic protein 2 (BMP-2), into modified rat bone marrow mesenchymal stem cells (rBMSCs) and then compounded with platelet-rich plasma (PRP). To achieve rBMSCs, the osteoporosis model of rats was established, and then the rBMSCs from the rats were isolated and identified. Co-transfection of rBMSCs with PDGF-BB-GFP and BMP-2 and detection of PDGF-BB/BMP-2 expression in transfected BMSCs was assessed by qRT-PCR and western blot, respectively. Moreover, the effect of the two growth factors transfection of rBMSCs on adipogenic differentiation was evaluated by oil red O staining and western blot, respectively. Finally, construction of the two growth factors transfection of rBMSCs compounded with PRP and detection of adipogenic differentiation were assessed by oil red O staining, CCK-8, and western blot, respectively. In vitro studies revealed that the two growth factors transfection of rBMSCs compounded with PRP promoted cell viability and inhibited adipogenic differentiation and could be promising for inhibiting adipogenic differentiation.
Subject(s)
Adipose Tissue/cytology , Becaplermin/genetics , Bone Morphogenetic Protein 2/genetics , Cell Differentiation , Mesenchymal Stem Cells/cytology , Platelet-Rich Plasma , Animals , Cells, Cultured , Rats , TransfectionABSTRACT
In order to improve the efficiency of disease diagnosis and environmental monitoring, it is desirable to detect the concentration of proteins and metal ions simultaneously, since the current popular diagnostic platform can only detect proteins or metal ions independently. In this work, we developed a colorimetric microfluidic paper-based analytical device (µPAD) for simultaneous determination of protein (bovine serum albumin, BSA) and metal ions [Fe(III) and Ni(II)]. The µPAD consisted of one central zone, ten reaction zones and ten detection zones in one device, in which reaction solutions were effectively optimized for different types of chromogenic reactions. Fe(III), Ni(II) and BSA can be easily identified by the colored products, and their concentrations are in good accordance with color depth based on the established standard curves. The detection limits are 0.1 mM for Fe(III), 0.5 mM for Ni(II) and 1µM for BSA, respectively. Best of all, we demonstrated the efficiency of the µPAD with accurate detection of Fe(III), Ni (II) and BSA from river water samples within 15 minutes. The µPAD detection is efficient, instrument-free, and easy-to-use, holding great potential for simultaneous detection of cross type analytes in numerous diagnostic fields.
ABSTRACT
The thermally induced cyclodehydrofluorization of iron tetrakis(pentafluorophenyl)porphyrin proceeded highly stereoselectively to give a prochiral product on a gold surface in an ultrahigh vacuum, whereas dehydrocyclization of the respective iron tetrakisphenylporphyrin did not show such selectivity. Stereoselectivity was predominantly observed for closely packed layers, which is an indication of intermolecular cooperativity and steric constraints induced by adjacent species. Density functional theory identified intermolecular packing constraints as the origin of such selectivity during the reaction. Scanning tunneling microscopy revealed the formation of an enantiomerically pure two-dimensional self-assembly as a conglomerate of mirror domains. On-surface two-dimensional topochemistry, as reported herein, may open new routes for stereoselective synthesis.
ABSTRACT
Multiferroic materials endowed with both dielectric and magnetic orders, are ideal candidates for a wide range of applications. In this work, we reported two phase transitions of MnI2 at 3.45 K and 4 K by systemically measuring the magnetic-field and temperature-dependent magnetization of the MnI2 thin flakes. Furthermore, we observed similar temperature and field-dependent behaviours for the magnetic susceptibility of MnI2 and electronic capacitance of the Ag/MnI2/Ag devices below 3.5 K. Considering the related theory work, we discussed the relationship between the antiferromagnetic and ferroelectric orders in MnI2. Our work reveals the in-plane magnetic and electric properties of MnI2 materials, which might be helpful for the further investigation and application of MnI2 multiferroics in the future.