ABSTRACT
Precipitation during the viral inactivation, neutralization and depth filtration step of a monoclonal antibody (mAb) purification process can provide quantifiable and potentially significant impurity reduction. However, robust commercial implementation of this unit operation is limited due to the lack of a representative scale-down model to characterize the removal of impurities. The objective of this work is to compare isoelectric impurity precipitation behavior for a monoclonal antibody product across scales, from benchtop to pilot manufacturing. Scaling parameters such as agitation and vessel geometry were investigated, with the precipitate amount and particle size distribution (PSD) characterized via turbidity and flow imaging microscopy. Qualitative analysis of the data shows that maintaining a consistent energy dissipation rate (EDR) could be used for approximate scaling of vessel geometry and agitator speeds in the absence of more detailed simulation. For a more rigorous approach, however, agitation was simulated via computational fluid dynamics (CFD) and these results were applied alongside a population balance model to simulate the trajectory of the size distribution of precipitate. CFD results were analyzed within a framework of a two-compartment mixing model comprising regions of high- and low-energy agitation, with material exchange between the two. Rate terms accounting for particle formation, growth and breakage within each region were defined, accounting for dependence on turbulence. This bifurcated model was successful in capturing the variability in particle sizes over time across scales. Such an approach enhances the mechanistic understanding of impurity precipitation and provides additional tools for model-assisted prediction for process scaling.
ABSTRACT
Protein A chromatography is an enabling technology in current manufacturing processes of monoclonal antibodies (mAbs) and mAb derivatives, largely due to its ability to reduce the levels of process-related impurities by several orders of magnitude. Despite its widespread application, the use of mathematical modeling capable of accurately predicting the full protein A chromatographic process, including loading, post-loading wash and elution stages, has been limited. This work describes a mechanistic modeling approach utilizing the general rate model (GRM), the capabilities of which are explored and optimized using two isotherm models. Isotherm parameters were estimated by inverse-fitting simulated breakthrough curves to experimental data at various pH values. The parameter values so obtained were interpolated across the relevant pH range using a best-fit curve, thus enabling their use in predictive modeling, including of elution over a range of pH. The model provides accurate predictions (< 3% mean error in 10% dynamic binding capacity predictions and â¼ 5% mean error in elution mass and pool volume predictions, both on scale-up) for various residence times, buffer conditions and elution schemes and its effectiveness for use in scale-up and process development is shown by applying the same parameters to larger columns and a wider range of residence times.
Subject(s)
Chromatography , Staphylococcal Protein A , Staphylococcal Protein A/chemistry , Models, Theoretical , Antibodies, Monoclonal/chemistry , Chromatography, Ion Exchange/methodsABSTRACT
Recent work has shown that aggregates in monoclonal antibody (mAb) solutions may be made up not just of mAb oligomers but can also harbor hundreds of host-cell proteins (HCPs), suggesting that aggregate persistence through downstream purification operations may be related to HCP clearance. We have examined this in a primary analysis of aggregate persistence through processing steps that are typically implemented for HCP reduction, demonstrating that the phenomenon is relevant to depth filtration, protein A chromatography and flow-through anion-exchange (AEX) polishing. Confocal laser scanning microscopy observations show that aggregates compete with the mAb to adsorb specifically in protein A chromatography and that this competitive interaction is integral to the efficacy of protein A washes. Column chromatography reveals that the protein A elution tail can have a relatively high concentration of aggregates, which corroborates analogous observations from recent HCP studies. Similar measurements in flow-through AEX chromatography show that relatively large aggregates that harbor HCPs and that persist into the protein A eluate can be retained to an extent that appears to depend primarily on the resin surface chemistry. The total aggregate mass fraction of both protein A eluate pools (â¼ 2.4 - 3.6%) and AEX flow-through fractions (â¼ 1.5 - 3.2%) correlates generally with HCP concentrations measured using enzyme-linked immunosorbent assay (ELISA) as well as the number of HCPs that may be identified in proteomic analysis. This suggests that quantification of the aggregate mass fraction may serve as a convenient albeit imperfect surrogate for informing early process development decisions regarding HCP clearance strategies.
Subject(s)
Chromatography , Proteomics , Cricetinae , Animals , Cricetulus , Proteomics/methods , CHO Cells , Antibodies, Monoclonal/chemistry , Staphylococcal Protein A/chemistry , AnionsABSTRACT
Host-cell proteins (HCPs) and high molecular weight (HMW) species have historically been treated as independent classes of impurities in the downstream processing of monoclonal antibodies (mAbs), but recent indications suggest that they may be partially linked. We have explored this connection with a shotgun proteomic analysis of HMW impurities that were isolated from harvest cell culture fluid (HCCF) and protein A eluate using size-exclusion chromatography (SEC). As part of the proteomic analysis, a cross-digest study was performed in which samples were analyzed using both the standard and native digest techniques to enable a fair comparison between bioprocess pools. This comparison reveals that the HCP profiles of HCCF and protein A eluate overlap substantially more than previous work has suggested, because hundreds of HCPs are conserved in aggregates that may be up to ~50 nm in hydrodynamic radius and that persist through the protein A capture step. Quantitative SWATH proteomics suggests that the majority of the protein A eluate's HCP mass is found in such aggregates, and this is corroborated by ELISA measurements on SEC fractions. The SWATH data also show that intra-aggregate concentrations of individual HCPs are positively correlated between aggregates that were isolated from HCCF and protein A eluate, and species that have generally been considered difficult to remove tend to be more concentrated than their counterparts. These observations support prior hypotheses regarding aggregate-mediated HCP persistence through protein A chromatography and highlight the importance of this persistence mechanism.
Subject(s)
Antibodies, Monoclonal , Proteomics , Cricetinae , Animals , Antibodies, Monoclonal/chemistry , Cricetulus , Proteomics/methods , CHO Cells , Chromatography, Liquid/methods , Staphylococcal Protein A/chemistryABSTRACT
Protein A chromatography is a workhorse in monoclonal antibody (mAb) manufacture since it provides effective separation of mAbs from impurities such as host-cell proteins (HCPs) in a single capture step. HCP clearance can be aided by the inclusion of a wash step prior to low-pH elution. Although high-pH washes can be effective in removing additional HCPs from the loaded column, they may also contribute to a reduced mAb yield. In this work we show that this yield loss is reflected in a pH-dependent variation of the equilibrium binding capacity of the protein A resin, which is also observed for the capacity of the Fc fragments alone and therefore not a result of steric interactions involving the Fab fragments in the intact mAbs. We therefore hypothesized that the high-pH wash loss was due to protonation or deprotonation of ionizable residues on the protein A ligand. To evaluate this, we applied a rational protein engineering approach to the Z domain (the Fc-binding component of most commercial protein A ligands) and expressed engineered mutants in E. coli. Biolayer interferometry and affinity chromatography experiments showed that some of the Z domain mutants were able to mitigate wash loss at high pH while maintaining similar binding characteristics at neutral pH. These experiments enabled elucidation of the roles of specific interactions in the Z domain - Fc complex, but more importantly offer a route to ameliorating the disadvantages of high-pH washes in protein A chromatography.
Subject(s)
Escherichia coli , Staphylococcal Protein A , Cricetinae , Animals , Staphylococcal Protein A/chemistry , Ligands , Escherichia coli/metabolism , Cricetulus , CHO Cells , Antibodies, Monoclonal/chemistry , Chromatography, Affinity/methods , Hydrogen-Ion ConcentrationABSTRACT
A number of studies have demonstrated that depth filtration can provide significant adsorptive removal of host cell proteins (HCP), but there is still considerable uncertainty regarding the underlying factors controlling HCP binding. This study compared the binding characteristics of two fine grade depth filters, the X0SP (polyacrylic fiber with a synthetic silica filter aid) and X0HC (cellulose fibers with diatomaceous earth (DE) as a filter aid), using a series of model proteins with well-defined physical characteristics. Protein binding to the X0SP filter was dominated by electrostatic interactions with greatest capacity for positively-charged proteins. In contrast, the X0HC filter showed greater binding of more hydrophobic proteins although electrostatic interactions also played a role. In addition, ovotransferrin showed unusually high binding capacity to the X0HC, likely due to interactions with metals in the DE. Scanning Electron Microscopy with Energy Dispersive Spectroscopy was used to obtain additional understanding of the binding behavior. These results provide important insights into the physical phenomena governing HCP binding to both fully synthetic and natural (cellulose + DE) depth filters.
Subject(s)
Diatomaceous Earth , Silicon Dioxide , Diatomaceous Earth/chemistry , Filtration/methods , Adsorption , Proteins/chemistryABSTRACT
Protein PEGylation, i.e. functionalization with poly(ethylene glycol) chains, has been demonstrated an efficient way to improve the therapeutic index of these biopharmaceuticals. We demonstrated that Multicolumn Countercurrent Solvent Gradient Purification (MCSGP) is an efficient process for the separation of PEGylated proteins (Kim et al., Ind. and Eng. Chem. Res. 2021, 60, 29, 10764-10776), thanks to the internal recycling of product-containing side fractions. This recycling phase plays a critical role in the economy of MCSGP as it avoids wasting valuable product, but at the same time impacts its productivity extending the overall process duration. In this study, our aim is to elucidate the role of the gradient slope within this recycling stage on the yield and productivity of MCSGP for two case-studies: PEGylated lysozyme and an industrially relevant PEGylated protein. While all the examples of MCSGP in the literature refer to a single gradient slope in the elution phase, for the first time we systematically investigate three different gradient configurations: i) a single gradient slope throughout the entire elution, ii) recycling with an increased gradient slope, to shed light on the competition between volume of the recycled fraction and required inline dilution and iii) an isocratic elution during the recycling phase. The dual gradient elution proved to be a valuable solution for boosting the recovery of high-value products, with the potential for alleviating the pressure on the upstream processing.
Subject(s)
Antibodies, Monoclonal , Countercurrent Distribution , Solvents , Polyethylene GlycolsABSTRACT
Recent development in Protein A chromatography has adopted wash buffers with a wide range of pH to improve the removal of process-related impurities, e.g., host cell proteins (HCPs), from Fc-based target biological products. Thus, it is important to investigate the pH effect on the binding behaviors of target products of various properties on Protein A resins. Here we performed column breakthrough experiments for two monoclonal antibodies (mAbs) and one Fc-fusion protein on two Protein A resins from pH 4 to pH 10, and the experimental data was analyzed using a mechanistic model to obtain isotherm and mass transfer parameters. The two mAbs exhibited relatively high dynamic binding capacity (DBC) at 10% breakthrough of 43 - 67 g/L at pH 6-9 followed by a â¼30% decrease from pH 9 to pH 10; while the Fc-fusion protein reached the highest DBC at 10% breakthrough of 10 - 17 g/L at pH 5 and thereafter the capacity gradually reduced. Model analyses revealed that the two mAbs had higher maximum binding capacity by 2 - 5 fold but weaker binding affinity (12 - 64%) than the Fc-fusion protein from pH 5 to pH 9. For the three molecules, similar patterns of the pH impact were observed on the two Protein A resins with the Jetted A50 resin showing generally higher DBC and stronger binding affinity than the MabSelect SuRe LX resin. Additionally, an inverse relationship between the binding affinity and surface diffusivity was observed for both resins. Besides obtaining the isotherm parameters from the column breakthrough data, a direct batch equilibrium measurement showed comparable trend in these parameters with relatively more scattered values due to the inherent uncertainties to accurately determine the initial slope of the isotherm in highly favorable adsorption conditions. Finally, isothermal titration calorimetry (ITC) results revealed that the measured binding affinity using free Protein A ligand was stronger than that obtained from the breakthrough and isotherm results for the resin, possibly due to the reduced accessibility of the immobilized ligand on resin surface. Overall, this work can facilitate future Protein A ligand design and affinity chromatography process optimization for biomanufacturing.
Subject(s)
Biological Products , Staphylococcal Protein A , Antibodies, Monoclonal , Ligands , Chromatography, Affinity , Resins, PlantABSTRACT
Background: Bispecific antibodies (BsAb) belong to a novel antibody category with advantages over traditional mono-specific therapeutic antibodies. However, product variants are also commonly seen during the production of BsAb, which poses significant challenges to downstream processing. In this study, the adsorptive characteristics of a BsAb product and its variants were investigated for a set of depth filters during primary recovery of the cell culture fluid. Methods: The retention of the BsAb product and its variants on a set of Millistak+® D0HC and X0HC depth filters were first investigated, followed by studying the mechanism of their adsorption on the depth filters. The chemical and structural properties of depth filters along with the molecular properties of the product and its variants were studied subsequently. Results: The X0HC filter was found to be able to retain a significant amount of low molecular weight (LMW) variants along with a low amount of main product retained. Different levels of retention, observed for these variants, were correlated to their different hydrophobic and charge characteristics in relation with the adsorptive properties of the depth filters used. Electrostatic, hydrophobic, and hydrogen bonding interactions were found to be the key forces to keep product variants retained on the depth filter where the higher hydrophobicity of the LMW variants may cause them to be preferentially retained. Conclusion: Harvest depth filters potentially can be utilized for retaining the BsAb variants, which depends on relative molecular properties of the product and its variants and adsorptive properties of the depth filters used.
ABSTRACT
Conjugation of biopharmaceuticals to polyethylene glycol chains, known as PEGylation, is nowadays an efficient and widely exploited strategy to improve critical properties of the active molecule, including stability, biodistribution profile, and reduced clearance. A crucial step in the manufacturing of PEGylated drugs is the purification. The reference process in industrial settings is single-column chromatography, which can meet the stringent purity requisites only at the expenses of poor product recoveries. A valuable solution to this trade-off is the Multicolumn Countercurrent Solvent Gradient Purification (MCSGP), which allows the internal and automated recycling of product-containing side fractions that are typically discarded in the batch processes. In this study, an ad hoc design procedure was applied to the single-column batch purification of an industrially relevant PEGylated protein, with the aim of defining optimal collection window, elution duration and elution buffer ionic strength to be then transferred to the MCSGP. This significantly alleviates the design of the continuous operation, subjected to manifold process parameters. The MCSGP designed by directly transferring the optimal parameters allowed to improve the yield and productivity by 8.2% and 17.8%, respectively, when compared to the corresponding optimized batch process, ensuring a purity specification of 98.0%. Once the efficacy of MCSGP was demonstrated, a detailed analysis of its cost of goods was performed and compared to the case of single-column purification. To the best of our knowledge, this is the first example of a detailed economic investigation of the MCSGP across different manufacturing scenarios and process cadences of industrial relevance, which demonstrated not only the viability of this continuous technology but also its flexibility.
Subject(s)
Biological Products , Countercurrent Distribution , Countercurrent Distribution/methods , Polyethylene Glycols , Solvents/chemistry , Tissue DistributionABSTRACT
Flow-through ion-exchange chromatography is frequently used in polishing biotherapeutics, but the factors that contribute to impurity persistence are incompletely understood. A large number of dilute impurities may be encountered that exhibit physicochemical diversity, making the flow-through separation performance highly sensitive to process conditions. The analysis presented in this work develops two novel correlations that offer transferable insights into the chromatographic behavior of weakly adsorbing impurities. The first, based on column simulations and validated experimentally, delineates the relative contributions of thermodynamic, transport, and geometric properties in dictating the initial breakthrough volumes of dilute species. The Graetz number for mass transfer was found to generalize the transport contributions, enabling estimation of a threshold in the equilibrium constant below which impurity persistence is expected. Impurity adsorption equilibria are needed to use this correlation, but such data are not typically available. The second relationship presented in this work may be used to reduce the experimental burden of estimating adsorption equilibria as a function of ionic strength. A correlation between stoichiometric displacement model parameters was found by consolidating isocratic retention data for over 200 protein-pH-resin combinations from the extant literature. Coupled with Yamamoto's analysis of linear gradient elution data, this correlation may be used to estimate retentivity approximately from a single experimental measurement, which could prove useful in predicting host-cell protein chromatographic behavior.
Subject(s)
Proteins , Adsorption , Chromatography, Ion Exchange , Osmolar Concentration , ThermodynamicsABSTRACT
BACKGROUND: Virus inactivation is a critical operation in therapeutic protein manufacturing. Low pH buffers are a widely used strategy to ensure robust enveloped virus clearance. However, the choice of model virus can give varying results in viral clearance studies. Pseudorabies virus (SuHV) or herpes simplex virus-1 (HSV-1) are frequently chosen as model viruses to demonstrate the inactivation for the herpes family. RESULTS: In this study, SuHV, HSV-1, and equine arteritis virus (EAV) were used to compare the inactivation susceptibility at pH 4.0 and 4°C. SuHV and HSV-1 are from the same family, and EAV was chosen as a small, enveloped virus. Glycine, acetate, and citrate buffers at pH 4.0 and varying buffer strengths were studied. The inactivation susceptibility was found to be in the order of SuHV > HSV > EAV. The buffer effectiveness was found to be in the order of citrate > acetate > glycine. The smaller virus, EAV, remained stable and infectious in all the buffer types and compositions studied. CONCLUSION: The variation in inactivation susceptibility of herpes viruses indicated that SuHV and HSV cannot be interchangeably used as a virus model for inactivation studies. Smaller viruses might remain adventitiously infective at moderately low pH.
Subject(s)
Herpesvirus 1, Human , Viruses , Animals , Horses , Hydrogen-Ion Concentration , Virus InactivationABSTRACT
Monoclonal antibody (mAb) interchain disulfide bond reduction can cause a loss of function and negatively impact the therapeutic's efficacy and safety. Disulfide bond reduction has been observed at various stages during the manufacturing process, including processing of the harvested material. The factors and mechanisms driving this phenomenon are not fully understood. In this study, we examined the host cell proteome as a potential factor affecting the susceptibility of a mAb to disulfide bond reduction in the harvested cell culture fluid (HCCF). We used untargeted liquid-chromatography-mass spectrometry-based proteomics experiments in conjunction with a semi-automated protein identification workflow to systematically compare Chinese hamster ovary (CHO) cell protein abundances between bioreactor conditions that result in reduction-susceptible and reduction-free HCCF. Although the growth profiles and antibody titers of these two bioreactor conditions were indistinguishable, we observed broad differences in host cell protein (HCP) expression. We found significant differences in the abundance of glycolytic enzymes, key protein reductases, and antioxidant defense enzymes. Multivariate analysis of the proteomics data determined that upregulation of stress-inducible endoplasmic reticulum (ER) and other chaperone proteins is a discriminatory characteristic of reduction-susceptible HCP profiles. Overall, these results suggest that stress response pathways activated during bioreactor culture increase the reduction-susceptibility of HCCF. Consequently, these pathways could be valuable targets for optimizing culture conditions to improve protein quality.
Subject(s)
Antibodies, Monoclonal/biosynthesis , Disulfides/metabolism , Proteome , Proteomics , Stress, Physiological , Animals , Antibodies, Monoclonal/genetics , Bioreactors , CHO Cells , Cricetulus , Endoplasmic Reticulum Stress , Glycolysis , Heat-Shock Proteins/metabolism , Oxidative Stress , Protein Interaction MapsABSTRACT
BACKGROUND: Therapeutic protein manufacturing would benefit by having an arsenal of ways to inactivate viruses. There have been many publications on the virus inactivation ability of arginine at pH 4.0, but the mechanism of this inactivation is unknown. This study explored how virus structure and solution conditions enhance virus inactivation by arginine and leads to a better understanding of the mechanism of virus inactivation by arginine. RESULTS: Large diameter viruses from the Herpesviridae family (SuHV-1, HSV-1) with loosely packed lipids were highly inactivated by arginine, whereas small diameter, enveloped viruses (equine arteritis virus (EAV) and bovine viral diarrhea virus (BVDV)) with tightly packed lipids were negligibly inactivated by arginine. To increase the inactivation of viruses resistant to arginine, arginine-derivatives and arginine peptides were tested. Derivates and peptides demonstrated that a greater capacity for clustering and added hydrophobicity enhanced virus inactivation. Dynamic light scattering (DLS) and transmission electron microscopy (TEM) detected increases in virus size after arginine exposure, supporting the mechanism of lipid expansion. CONCLUSIONS: Arginine most likely interacts with the lipid membrane to cause inactivation. This is shown by larger viruses being more sensitive to inactivation and expansion of the viral size. The enhancement of arginine inactivation when increased hydrophobic molecules are present or arginine is clustered demonstrates a potential mechanism of how arginine interacts with the lipid membrane.
Subject(s)
Diarrhea Viruses, Bovine Viral , Viruses , Animals , Arginine , Horses , Virus InactivationABSTRACT
The goal of cell culture process intensification is to improve productivity while maintaining acceptable quality attributes. In this report, four processes, namely a conventional manufacturing Process A, and processes intensified by enriched N-1 seed (Process B), by perfusion N-1 seed (Process C), and by perfusion production (Process D) were developed for the production of a monoclonal antibody. The three intensified processes substantially improved productivity, however, the product either failed to meet the specification for charge variant species (main peak) for Process D or the production process required early harvest to meet the specification for charge variant species, Day 10 or Day 6 for Processes B and C, respectively. The lower main peak for the intensified processes was due to higher basic species resulting from higher C-terminal lysine. To resolve this product quality issue, we developed an enzyme treatment method by introducing carboxypeptidase B (CpB) to clip the C-terminal lysine, leading to significantly increased main peak and an acceptable and more homogenous product quality for all the intensified processes. Additionally, Processes B and C with CpB treatment extended bioreactor durations to Day 14 increasing titer by 38% and 108%, respectively. This simple yet effective enzyme treatment strategy could be applicable to other processes that have similar product quality issues.
Subject(s)
Antibodies, Monoclonal/biosynthesis , Batch Cell Culture Techniques , Bioreactors , Carboxypeptidase B/pharmacology , Animals , CHO Cells , CricetulusABSTRACT
Multi-column capture chromatography (MCC) has gained increased attention lately due to the significant economic and process-related advantages it offers compared to traditional batch mode chromatography. However, for wide adoption of this technology in the clinical and commercial space, it requires scalable models for viral validation. In this study, additional viral validation studies were conducted under cGLP guidelines to assess retro-(X-MuLV) and parvo-virus (minute virus of mice) clearance across twin-column continuous capture chromatography (CaptureSMB) to supplement work previously performed. A surrogate model was validated using standard batch mode chromatography equipment based on flow path modifications to mimic the loading strategy employed in CaptureSMB. In addition, aged resin was used in this surrogate format to assess the impact of resin lifetime on viral clearance during continuous capture operation. The impact of column loading was also explored to shed light on the viral clearance mechanisms of protein A chromatography in overloading conditions. The proposed approach greatly simplifies MCC virus validation studies, and provides a robust strategy for regulatory filing of continuous biomanufacturing processes.
Subject(s)
Antibodies, Monoclonal , Leukemia Virus, Murine/chemistry , Minute Virus of Mice/chemistry , Animals , Antibodies, Monoclonal/chemistry , Antibodies, Monoclonal/isolation & purification , CHO Cells , Chromatography , Cricetulus , MiceABSTRACT
Manufacturability of immunoglobulin G4 (IgG4) antibodies from the Chemistry, Manufacture, and Controls (CMC) perspective has received little attention during early drug discovery. Despite the success of protein engineering in improving antibody biophysical properties, a clear gap still exists between rational design of IgG4 candidates and their manufacturing suitability. Here, we illustrate that undesirable two-peak elution profiles in cation-exchange chromatography are attributed to the S228P mutation (in IgG4 core-hinge region) intentionally designed to prevent Fab-arm exchange. A new scaffolding platform for engineering IgG4 antibodies amenable to bioprocessing and bioanalysis is proposed by introducing an "IgG1-like" single-point mutation in the hinge or CH1 region of IgG4S228P. This work offers insight into the design, discovery, and development of innovative therapeutic antibodies that are well suited for robust biomanufacturing and quality control.
Subject(s)
Antibodies, Monoclonal , Immunoglobulin G , Mutation, Missense , Amino Acid Substitution , Animals , Antibodies, Monoclonal/chemistry , Antibodies, Monoclonal/genetics , Antibodies, Monoclonal/immunology , CHO Cells , Cricetulus , Humans , Immunoglobulin G/chemistry , Immunoglobulin G/genetics , Immunoglobulin G/immunologyABSTRACT
High molecular weight (HMW) aggregate formation of therapeutic monoclonal antibodies (mAbs) during cation-exchange chromatography (CEX) has been frequently observed, and can be a challenge for downstream purification. To gain mechanistic understanding of this phenomenon, aggregate formation in bind-elute CEX for two therapeutic mAbs (IgG1 and IgG4) was examined on three CEX resins (Capto SP ImpRes, Fractogel EMD SE Hicap, and POROS XS). First, mAb structural stability was studied in solutions under CEX load conditions. Using differential scanning fluorimetry (DSF), the measured melting temperature (Tm DSF (Unbound)) decreased from 60.7 to 52.4°C for mAb1 and 51.5 to 45.2°C for mAb2 when lowering pH from 6.0 to 4.5. Then, mAb structural stability was further investigated in the bound state on CEX surfaces. Using differential scanning calorimetry (DSC), the measured melting temperature of the bound mAbs (Tm DSC (Bound)) was 4.5 - 6.5°C lower than that for the unbound mAbs (Tm DSC (Unbound)) in the same solutions. The Tm differences (∆Tm DSC (Unbound minus Bound)) between the two states correlated with the severity of mAb aggregation in CEX operations, indicating the importance of both intrinsic mAb stability and resin properties. In particular, resin hydrophobicity was shown to have a critical impact. The interplay among these protein- and resin-related factors, together with solution conditions, ultimately dictates the aggregate formation observed. Finally, the hydrophobicity of the CEX resins (Capto SP ImpRes < Fractogel EMD SE Hicap < POROS XS) was measured using a fluorescence-based method to quantitatively characterize this resin property. Results suggest that the mAb-accessible hydrophobic regions of the CEX resins affect the structural stability of the bound mAbs to various degrees, leading to differences in aggregate formation upon mAb elution. In summary, this study offers insight into the mechanism of mAb aggregation in bind-elute CEX operations, and the in-depth understanding facilitates the development of robust CEX conditions for mAb purification.
Subject(s)
Antibodies, Monoclonal , Cation Exchange Resins , Cations , Chromatography, Ion Exchange , Hydrophobic and Hydrophilic InteractionsABSTRACT
The disulfide reduction of intact monoclonal antibodies (mAbs) and subsequent formation of low molecular weight (LMW) species pose a direct risk to product stability, potency, and patient safety. Although enzymatic mechanisms of reduction are well established, an understanding of the cellular mechanisms during the bioreactor process leading to increased risk of disulfide reduction after harvest remains elusive. In this study, we examined bench, pilot, and manufacturing-scale batches of two mAbs expressed in Chinese hamster ovary (CHO) cells, where harvested cell culture fluid (HCCF) occasionally demonstrated disulfide reduction. Comparative proteomics highlighted a significant elevation in glyceraldehyde-3-phosphate dehydrogenase (GAPDH) levels in a highly reducing batch of HCCF, compared to a non-reducing batch. Analysis during production cell culture showed that increased GAPDH gene and protein expression correlated to disulfide reduction risk in HCCF in every case examined. Additionally, glucose 6-phosphate dehydrogenase (G6PD) activity and an increased (≥ 300%) lactate/pyruvate molar ratio (lac/pyr) during production cell culture correlated to disulfide reduction risk, suggesting a metabolic shift to the pentose phosphate pathway (PPP). In all, these results suggest that metabolic alterations during cell culture lead to changes in protein expression and enzyme activity that in turn increase the risk of disulfide reduction in HCCF. KEY POINTS: ⢠Bioreactor conditions resulted in reduction susceptible harvest material. ⢠GAPDH expression, G6PD activity, and lac/pyr ratio correlated with mAb reduction. ⢠Demonstrated role for cell metabolic changes in post-harvest mAb reduction. Graphical abstract.
Subject(s)
Antibodies, Monoclonal , Antibody Formation , Animals , CHO Cells , Cricetinae , Cricetulus , Disulfides , HumansABSTRACT
The separation and purification of therapeutic proteins from their biological resources pose a great limitation for industrial manufacturing of biologics in an efficient and cost-effective manner. We report here a supramolecular polymeric system that can undergo multiple reversible processes for efficient capture, precipitation, and recovery of monoclonal antibodies (mAbs). These supramolecular polymers, namely immunofibers (IFs), are formed by coassembly of a mAb-binding peptide amphiphile with a rationally designed filler molecule of varying stoichiometric ratios. Under the optimized conditions, IFs can specifically capture mAbs with a precipitation yield greater than 99%, leading to an overall mAb recovery yield of 94%. We also demonstrated the feasibility of capturing and recovering two mAbs from clarified cell culture harvest. These results showcase the promising potential of peptide-based supramolecular polymers as reversible affinity precipitants for mAb purification.