ABSTRACT
The interaction of cyclodextrins (CDs) with structure-controlled polymers is expected to provide significant insights into macromolecular recognition. However, the interaction of CDs with structure-controlled polymers has been an underexamined issue of investigation. Herein, alternating amphiphilic cooligomers (oligoCnAH, where n denotes the carbon number of alkyl groups; n = 4, 8, and 12) were synthesized by copper(I)-catalyzed azide-alkyne cycloaddition polymerization of heterodimers of 4-azido-5-hexynoic acid (AH) derivatives carrying N-alkylamide and t-butyl (tBu) ester side chains, followed by hydrolysis of the tBu ester, to study the interaction of CDs with oligoCnAH by 1H NMR, nuclear Overhauser effect spectroscopy, and pulse-field-gradient spin-echo NMR. These NMR studies indicated that αCD interacted with oligoC4AH, αCD and ßCD interacted with oligoC8AH, and all CDs interacted with oligoC12AH. Based on the equilibrium models proposed, the binding constants were evaluated for the binary mixtures, which showed interaction. Comparing the interactions of the CDs/oligoC12AH binary mixtures with those of the binary mixtures of CDs and alternating copolymers of sodium maleate and dodecyl vinyl ether (polyC12M), it is concluded that oligoC12AH forms less stable micelles than does polyC12M presumably because of the lower molecular weight, the hydrophilic amide groups in the side chain, and the longer interval between neighboring C12 groups in oligoC12AH.
ABSTRACT
Compressed sensing (CS) has been used to improve image quality in single-photon emission tomography (SPECT) imaging. However, the effects of CS on image quality parameters in myocardial perfusion imaging (MPI) have not been investigated in detail. This preliminary study aimed to compare the performance of CS-iterative reconstruction (CS-IR) with filtered back-projection (FBP) and maximum likelihood expectation maximization (ML-EM) on their ability to reduce the acquisition time of MPI. A digital phantom that mimicked the left ventricular myocardium was created. Projection images with 120 and 30 directions (360°), and with 60 and 15 directions (180°) were generated. The SPECT images were reconstructed using FBP, ML-EM, and CS-IR. The coefficient of variation (CV) for the uniformity of myocardial accumulation, septal wall thickness, and contrast ratio (Contrast) of the defect/normal lateral wall were calculated for evaluation. The simulation was performed ten times. The CV of CS-IR was lower than that of FBP and ML-EM in both 360° and 180° acquisitions. The septal wall thickness of CS-IR at the 360° acquisition was inferior to that of ML-EM, with a difference of 2.5 mm. Contrast did not differ between ML-EM and CS-IR for the 360° and 180° acquisitions. The CV for the quarter-acquisition time in CS-IR was lower than that for the full-acquisition time in the other reconstruction methods. CS-IR has the potential to reduce the acquisition time of MPI.
Subject(s)
Image Processing, Computer-Assisted , Myocardial Perfusion Imaging , Image Processing, Computer-Assisted/methods , Tomography, X-Ray Computed/methods , Tomography, Emission-Computed, Single-Photon/methods , Myocardium , Phantoms, Imaging , Myocardial Perfusion Imaging/methods , Perfusion , AlgorithmsABSTRACT
This study aimed to evaluate the effects of dipotassium hydrogen phosphate (K2HPO4) solution density on single-photon emission computed tomography (SPECT) image quality and quantification. We used a JSP phantom containing six cylinders filled with K2HPO4 solutions of varying densities. Computed tomography (CT) was performed, and CT values and linear attenuation coefficients were measured. Subsequently, SPECT images of an SIM2 bone phantom filled with 99mTc with/without K2HPO4 solution were acquired using a SPECT/CT camera. The full width at half maximum (FWHM), percentage coefficient of variation (%CV), recovery coefficient, and standardized uptake value (SUV) were evaluated to investigate the impact of the K2HPO4 solution density. The CT values and linear attenuation coefficients increased with the K2HPO4 solution density. The CT values for cancellous and cortical bones were reflected by K2HPO4 solution densities of 0.15-0.20 and 1.50-1.70 g/cm3, respectively. FWHM values were significantly lower with the K2HPO4 solution than those with water alone (18.0 ± 0.9 mm with water alone, 15.6 ± 0.2 mm with 0.15 g/cm3 K2HPO4, and 16.1 ± 0.3 mm with 1.49 g/cm3 K2HPO4). Although the %CVs showed no significant differences, the recovery coefficients obtained with water alone tended to be slightly lower than those obtained with the K2HPO4 solution. The SUV obtained using the standard density of the K2HPO4 solution differed from that obtained using the optimized density. In conclusion, SPECT image quality and quantification depends on the presence and concentration of the bone-equivalent solution. The optimal bone-equivalent solution density should be used to evaluate the bone image phantoms.
Subject(s)
Bone Density , Tomography, Emission-Computed, Single-Photon , Tomography, Emission-Computed, Single-Photon/methods , Tomography, X-Ray Computed/methods , Single Photon Emission Computed Tomography Computed Tomography , Phantoms, ImagingABSTRACT
PURPOSE: Adrenal venous sampling (AVS) is a reliable method for lateralization of adrenal hormone secretion, which is important for discriminating between aldosterone-producing adenoma and bilateral adrenal hyperplasia, both of which cause primary aldosteronism (PA). The aim of this study was to evaluate the diagnostic accuracy of the maximum and mean standardized uptake values (SUVmax and SUVmean, respectively) of 131I-6ß-iodomethyl-19-norcholesterol (NP-59) single-photon emission computed tomography (SPECT) for PA and its correspondence with AVS. METHODS: Adrenal NP-59 scintigraphy was performed in 14 patients with suspected PA, and AVS was also performed in 7 of them. SUVmax and SUVmean of the adrenal lesions on the dominant side and their ratios to the values on the non-dominant side (SUVRmax and SUVRmean, respectively) were calculated on SPECT images using ordered-subset conjugate gradient minimization (OSCGM) and three-dimensional ordered-subset expectation maximization (3D-OSEM) reconstruction algorithms. RESULTS: SUVmax and SUVmean on NP-59 SPECT images were significantly higher for aldosterone-producing adenoma than for bilateral adrenal hyperplasia or non-functioning adenoma and slightly superior to SUVRmax and SUVRmean (P = 0.0475 and P = 0.0447 vs. P = 0.124 and P = 0.132, respectively, with OSCGM). The respective areas under the receiver-operating characteristic curve for SUV and SUVR were 0.933 and 0.725 with OSCGM and 0.844 and 0.750 with 3D-OSEM, while SUVmax and SUVRmax had exactly the same diagnostic accuracy as SUVmean and SUVRmean. SUV and SUVR were associated with the diagnostic features on AVS and consistent with lateralization by AVS in most patients. CONCLUSION: In this study, SUV on NP-59 SPECT helped in the diagnosis of PA and was consistent with the results of AVS in nearly all cases.
Subject(s)
Adenoma , Hyperaldosteronism , Humans , Adrenal Glands/diagnostic imaging , Adrenal Glands/pathology , Hyperaldosteronism/diagnostic imaging , Hyperaldosteronism/etiology , Aldosterone , Adosterol , Hyperplasia , Radionuclide Imaging , Adenoma/diagnostic imaging , Adenoma/complications , Retrospective StudiesABSTRACT
Objectives: The purpose of this study was to validate undersampled single-photon emission computed tomography (SPECT) imaging using a combination of compressed sensing (CS) iterative reconstruction (CS-IR) and offset acquisition. Methods: Three types of numerical phantoms were used to evaluate image quality and quantification derived from CS with offset acquisition. SPECT images were reconstructed using filtered back-projection (FBP), maximum likelihood-expectation maximization (ML-EM), CS-IR, and CS-IR with offset acquisition. The efficacy of CS-IR with offset acquisition was examined in terms of spatial resolution, aspect ratio (ASR), activity concentration linearity, contrast, percent coefficient of variation (%CV), and specific binding ratio (SBR). Results: The full widths at half maximum remained unchanged as the number of projections decreased in CS-IR with offset acquisition. Changes in ASRs and linearities of count density were observed for ML-EM and CS-IR from undersampled projections. The %CV obtained by CS-IR with offset acquisition was substantially lower than that obtained by ML-EM and CS-IR. There were no significant differences between the %CVs obtained from 60 projections by CS-IR with offset acquisition and from 120 projections by FBP. Although the SBRs for CS-IR with offset acquisition tended to be slightly lower than for FBP, the SBRs for CS-IR with offset acquisition did not change with the number of projections. Conclusions: CS-IR with offset acquisition can provide good image quality and quantification compared with a commonly used SPECT reconstruction method, especially from undersampled projection data. Our proposed method could shorten overall SPECT acquisition times, which would benefit patients and enable quantification with dynamic SPECT acquisitions.
ABSTRACT
PURPOSE: The purposes of this study were to estimate the eye lens dose during the handling of radiopharmaceuticals and to validate the requirement of X-ray protective goggles in nuclear medicine. METHOD: Simulated eye lens radiation exposure (3-mm dose equivalent rate) was measured using a radiophotoluminescent glass dosimeter (RPLD) positioned at distances of 30 and 60 cm from 99mTc, 111In, and 123I radiation sources. Reduction rates were evaluated for the following means of radiation protection: X-ray protective goggles (0.07-, 0.50-, and 0.75-mm lead equivalent), a syringe shield, and a lead glass plate. RESULT: 3-mm dose equivalent rates without protection were obtained at 6.13±0.13 µSv/min/GBq for 99mTc, 23.08±0.19 µSv/min/GBq for 111In, and 11.07±0.11 µSv/min/GBq for 123I. Reduction rates for each source were over 90% for the syringe shield and the lead glass plate. The 0.75-mm lead equivalent X-ray protective goggles decreased the 3-mm dose equivalent rate by 68.8% for 99mTc, 60.6% for 111In, and 68.1% for 123I. CONCLUSION: Although the estimated eye lens equivalent dose during the handling of radiopharmaceuticals did not exceed the threshold dose, our results suggest that 0.75-mm lead equivalent X-ray protective goggles are needed to reduce the exposure of the lens while handling 99mTc, 111In, and 123I radiation sources.
Subject(s)
Lens, Crystalline , Nuclear Medicine , Occupational Exposure , Drug Tapering , Eye Protective Devices , Occupational Exposure/prevention & control , Radiation Dosage , Radiopharmaceuticals , X-RaysABSTRACT
The aim of this study was to optimize the number of iterations in bone SPECT imaging using a novel thoracic spine phantom (ISMM phantom). Methods: The quality and quantitative accuracy of bone SPECT images were evaluated by changing the number of iterations and the size of the hot spot in the phantom. True SUVs in the vertebra, tumor, and background parts were 9.8, 52.2, and 1.0, respectively. The phantom image was reconstructed using the ordered-subset expectation-maximization algorithm with CT-based attenuation correction, scatter correction, and resolution recovery; the number of ordered-subset expectation-maximization subsets was fixed at 10, with iterations ranging from 1 to 40. Full width at half maximum, percentage coefficient of variation, contrast ratio for the sphere and background (contrast), and recovery coefficient were evaluated as a function of the number of iterations for a given number of subsets (10) using the reconstructed images. In addition, SUVmax, SUVpeak, and SUVmean were calculated with various numbers of iterations for each sphere (13, 17, 22, and 28 mm) simulating a tumor. Results: Full width at half maximum decreased as the number of iterations was increased, and full width at half maximum converged uniformly when the number of iterations exceeded 10. The percentage coefficient of variation increased as the number of iterations was increased. Recovery coefficient decreased with decreasing sphere size. Contrast and all SUVs increased as the number of iterations was increased, and contrast and all SUVs converged uniformly when the number of iterations exceeded 5 and 10, respectively, for all sphere sizes. When the SUV was defined as the converged value for 10 iterations in the 28-mm sphere, the converged values of SUVmax, SUVpeak, and SUVmean were 75.1, 66.5, and 55.6, respectively. The relative error in the converged values for SUVmax, SUVpeak, and SUVmean were 43.8%, 27.3%, and 7.2% of the true value (52.2); all SUVs were overestimated. Conclusion: Using a thoracic spine phantom to evaluate the optimal reconstruction parameters in bone SPECT imaging, we determined the optimal number of iterations for 10 subsets to be 10.
Subject(s)
Tomography, Emission-Computed, Single-Photon , Algorithms , Phantoms, Imaging , Spine/diagnostic imagingABSTRACT
OBJECTIVE: The aim of this study was to validate the optimal scatter correction method and scatter estimation window setting in terms of image quality and quantitative accuracy for quantitative indium-111 (111In)-pentetreotide SPECT imaging. MATERIALS AND METHODS: We used a positron emission tomography/computed tomography (PET/CT) phantom to validate image quality and quantitative accuracy, and the SPECT images were acquired by the multi-energy window (MEW) method. The scatter estimation was performed using four kinds of energy windows (MEW1, MEW2, MEW3, and MEW4). Scatter correction was also performed using a dual-energy window (DEW) for comparison with MEWs. Image quality was assessed using percent contrast (% contrast) and background variability, and quantitative accuracy was assessed using the mean standardized uptake value (SUVmean) with hot spheres. RESULTS: In the quantification, all MEW settings approached the theoretical SUVmean (MEW1, 0.99±0.06; MEW2, 0.99±0.05; MEW3, 1.00±0.08; MEW4, 0.97±0.12) in contrast to DEW (0.88±0.05). The SUVmean value for scatter correction of both photopeaks for a 28 mm sphere showed the smallest difference from the theoretical value. CONCLUSION: The scatter correction method that gave optimal image quality and quantitative accuracy was MEW3 with two 20% energy windows (one over each photopeak) and four adjacent 3% scatter estimation windows (one on each side of the two photopeaks).
Subject(s)
Image Processing, Computer-Assisted/methods , Scattering, Radiation , Somatostatin/analogs & derivatives , Tomography, Emission-Computed, Single-Photon , Humans , Quality ControlABSTRACT
Metabolic bone volume (MBV), standardized uptake value (SUV), and total bone uptake (TBU) are new imaging biomarkers for quantitative bone single-photon emission computed tomography/computed tomography. The purpose of this study was to validate the quantitative accuracy and utility of MBV, SUVmean, and TBU for the assessment of bone metastases in prostate cancer. We used a bone-specific phantom with four hot spheres (φ = 13, 17, 22, 28 mm) filled with different Tc-99 m activities to simulate uptake ratios of 3 and 7, corresponding to normal and metastatic values. We calculated the error ratio (%Error) by comparing MBV, SUVmean, and TBU with true values for various parameters, including bone lesion size, uptake ratio, and SUV cut-off level. Differences for MBV, SUVmean, TBU, and bone scan index (BSI) were calculated to verify their utility in assessing bone metastases. Receiver-operating characteristic curve (ROC) analysis was performed to calculate the area under the curve (AUC) for each biomarker. MBV, SUVmean, and TBU were affected by lesion size, uptake ratio, and SUV cut-off level; however, TBU demonstrated the most stable %Error. The TBU %Error was within 15% in spheres 17 mm or larger when the SUV cut-off level was 7, regardless of the uptake ratio. The ROC analyses revealed the AUCs of BSI (0.977) and TBU (0.968). Additionally, TBU was able to assess bone metastasis when BSI provided false-negative results, but TBU also provided false-positive results by degenerative changes. The synergy between TBU and BSI could potentially improve diagnostic accuracy.
Subject(s)
Bone Neoplasms/diagnostic imaging , Bone Neoplasms/secondary , Phantoms, Imaging , Prostatic Neoplasms/pathology , Single Photon Emission Computed Tomography Computed Tomography , Tumor Burden , Aged , Aged, 80 and over , Bone Neoplasms/pathology , Humans , Male , Middle Aged , Retrospective Studies , Survival AnalysisABSTRACT
OBJECTIVE: The purpose of this study was to develop a novel myocardial phantom insert model that attaches to commercially available myocardial phantoms and simulates an ischemic area, using three-dimensional printing technology. METHODS: Ischemic inserts were designed to give four levels of absolute percent contrast (Low; 10%, Medium; 20%, High; 35%, and Defect; 100%) using CT images and computer-aided design software. The ischemic insert was composed of multiple slit structures to replicate myocardial ischemia. Myocardial phantom images with developed ischemic inserts were acquired using a SPECT/CT system and were then reconstructed using filtered back projection (FBP) and iterative reconstruction (IR) with various cutoff frequencies of a Butterworth filter. The performance and utility of ischemic inserts were evaluated according to percent contrast and 5-point scoring. RESULTS: The percent contrast and scoring results changed according to the ischemic insert type, cutoff frequency, and reconstruction method. The percent contrast of each insert obtained by FBP with 0.4 cycles/cm was 4.1% (Low), 15.7% (Medium), 17.4% (High), and 36.1% (Defect). Similarly, the percent contrast of each insert obtained by IR with 0.4 cycles/cm was 5.0% (Low), 17.0% (Medium), 21.9% (High), and 47.7% (Defect). CONCLUSIONS: We successfully developed an ischemic insert that attaches to a commercially available myocardial phantom by using CT imaging and 3D printing technology. Our proposed ischemic insert provided several abnormal perfusion patterns on myocardial SPECT images and may be useful for evaluating SPECT image quality.
Subject(s)
Tomography, Emission-Computed, Single-Photon , Tomography, X-Ray Computed , Algorithms , Image Processing, Computer-Assisted , Phantoms, Imaging , Printing, Three-Dimensional , SoftwareABSTRACT
The aim of this study was to evaluate the effects of the acquisition rotation speed and the rotation time for continuous repetitive rotation acquisition (CRRA) on image quality and quantification in 123I-FP-CIT SPECT. Methods: An anthropomorphic striatal phantom filled with 123I solution was acquired with CRRA and the step-and-shoot (SS) mode. The following combinations of acquisition rotation speed and rotation time for CRRA were used: 0.50 rpm by 30 frames, 0.17 rpm by 10 frames, 0.10 rpm by 6 frames, and 0.05 rpm by 3 frames. SPECT images were reconstructed using ordered-subset expectation maximization with resolution recovery, scatter, and CT-based attenuation correction. Two kinds of image processing patterns-image reconstruction after the addition of projection data (the added-projection-data process) and image addition after data reconstruction (the added-reconstructed-image process)-were investigated in this study. The effects of the acquisition parameters and the image processes were evaluated by the full width at half maximum, percentage coefficient of variation (%CV), and specific binding ratio (SBR). Results: With full width at half maximum, there were no clear differences between CRRA images obtained with the various rotation speeds before rotation and the SS mode. Although the combination of a slow rotation speed and a short rotation time improved image uniformity compared with the SS mode, the %CV obtained by CRRA increased as the rotation speed increased. The %CVs were 11.9% ± 0.9% for 0.50 rpm by 30 frames, 6.9% ± 0.9% for 0.05 rpm by 3 frames, and 9.6% ± 0.5% for SS mode. SBRs obtained by CRRA with the added-projection-data process were equal to those obtained by SS mode. However, SBRs obtained with the added-reconstructed-image process were clearly decreased compared with the SS mode. Conclusion: The combination of rotation speed and rotation times affects the image quality and quantification of 123I-FP-CIT SPECT using CRRA. When CRRA is applied in 123I-FP-CIT SPECT, it is necessary to use added-projection-data processes and proper rotation speeds (e.g., 0.10-0.17 rpm rotation speed).
Subject(s)
Image Processing, Computer-Assisted/methods , Rotation , Single Photon Emission Computed Tomography Computed Tomography , Tropanes , Phantoms, Imaging , Time FactorsABSTRACT
OBJECTIVE: The aim of this study was to investigate the efficacy of compressed sensing (CS)-based iterative reconstruction (CS-IR) from undersampled projection data in I-N-ω-fluoropropyl-2ß-carbomethoxy-3ß-(4-iodophenyl)nortropane single-photon emission computed tomography (SPECT). MATERIALS AND METHODS: We used the cylinder/sphere and the striatal digital phantom models. The number of projections was set at 120, 90, 60, 40, and 30 projections. SPECT images were reconstructed using filtered back-projection (FBP), maximum likelihood-expectation maximization (ML-EM), and CS-IR. The total-variation transform with local image gradient in L1-norm was adopted in our CS algorithm. The efficacy of CS-IR was examined in terms of the spatial resolution, recovery coefficient, aspect ratio (ASR), activity concentration linearity, percent coefficient of variation (%CV), and specific binding ratio. RESULTS: As the number of projections decreased, the following results were observed. No differences of the spatial resolution and activity concentration linearity were observed between reconstruction methods. However, ASR for FBP slightly increased in contrast to ML-EM and CS-IR for which ASR remained constant. There were not any clear differences between recovery coefficients obtained from each reconstruction. The %CV obtained by CS-IR was significantly superior to that obtained by other reconstructions at all number of projections: for example, the %CV obtained by 60 projection CS-IR was equivalent to that obtained by 120 projection FBP and ML-EM. The specific binding ratio did not change with the number of projections, and there were no significant differences between FBP, ML-EM, and CS-IR. CONCLUSION: We have demonstrated that CS-IR with decreased number of projections can provide a good image quality compared with commonly used SPECT reconstruction methods. This CS could help to reduce overall acquisition time in I-N-ω-fluoropropyl-2ß-carbomethoxy-3ß-(4-iodophenyl)nortropane SPECT, particularly.
Subject(s)
Image Processing, Computer-Assisted/methods , Phantoms, Imaging , Tomography, Emission-Computed, Single-Photon/instrumentation , TropanesABSTRACT
PURPOSE: Non-uniformity of a scintillation camera can result in artifacts on planar, projection, and single-photon emission computed tomography (SPECT) images. The purpose of this study was to evaluate the effect of field uniformity on artifact generation. METHODS: Using a simulation phantom, we investigated the relationship between non-uniformity of the image and artifacts on planar, projection, and SPECT images. All the non-uniformity images were generated by decreasing the photomultiplier tube sensitivity ranging from 0% to 10%. Quantitative analysis was performed using integral and differential uniformity. We also visually assessed artifact magnitude. RESULTS: Integral and differential uniformity increased with decreasing the photomultiplier tube sensitivity and tended to be higher in SPECT images compared with planar and projection images. For visual assessment, mean scores in SPECT images were higher than in planar and projection images for artifact detection. CONCLUSIONS: Our results indicated that decreasing field uniformity is expected to produce artifacts in planar and SPECT images. Also, SPECT images require very high-field uniformity.
Subject(s)
Artifacts , Gamma Cameras , Tomography, Emission-Computed, Single-Photon , Phantoms, ImagingABSTRACT
PURPOSE: The aim of this study was to evaluate the effect of misregistration between single-photon emission computed tomography (SPECT) and computed tomography (CT) images on bone SPECT. METHODS: We acquired SPECT and CT images of a body phantom filled with bone-equivalent solution and 99mTc for evaluation of bone SPECT. SPECT images were reconstructed using attenuation correction maps obtained by shifting the attenuation coefficients from non-shifted values (reference). Activity concentrations, SPECT standardized uptake values (SPECT-SUVs), and tumor background ratios (TBRs) were evaluated. RESULTS: Activity concentrations and SPECT-SUVs decreased with decreasing attenuation coefficient. The difference in attenuation coefficient was especially large between the shifted-to-lung (0.085 cm-1) and reference (0.249 cm-1) values. Non-shifted and shifted-to-lung SPECT-SUVs were 11.5±1.0 and 2.3±0.2, respectively. TBR also decreased with decreasing attenuation coefficient. The maximum percentage change in TBR was 86% in the shifted-to-lung value. CONCLUSIONS: Our results indicate that the accuracy of activity concentration and lesion detectability was commonly affected by misalignment between SPECT and CT images. Although the impact of SPECT/CT misregistration on bone SPECT is case-specific and difficult to predict, it is important to reduce the incidence of misregistration errors for quantitative bone SPECT imaging.
Subject(s)
Tomography, Emission-Computed, Single-Photon , Tomography, X-Ray Computed , Bone and Bones , Phantoms, ImagingABSTRACT
The present study aimed to validate the absolute quantitative accuracy of a calibration method for single-photon emission computed tomography (SPECT) using cross-calibration factor (CCF)- and system sensitivity-based calibration methods. The CCF obtained with different reconstruction parameters was evaluated using a cylindrical phantom (diameter 20 cm, height 20 cm). SPECT images were acquired with a positron emission tomography/computed tomography (CT) phantom. Subsequently, they were reconstructed by using ordered subset expectation maximization with resolution recovery, scatter, and CT-based attenuation correction. All reconstructed SPECT counts were converted to activity concentrations based on the CCF and system planar sensitivity. We placed 12 circular regions of interest, 37 mm in diameter, on the phantom background, and the converted activity concentration and relative measurement error were assessed. The CCF obtained using a cylindrical phantom was affected by the iterative update number and post-smoothing filter function. The activity concentration calibrated using the CCF showed over- and underestimation. However, the activity concentration obtained from the system planar sensitivity was similar to that gained using the phantom. The values obtained using the system planar sensitivity were within 10% of the activity concentrations obtained with the phantom. These findings demonstrated that the calibration method using system planar sensitivity provides accurate quantification within 10% of the true activity concentration. Further clinical examination is required to validate the present results.
Subject(s)
Algorithms , Image Processing, Computer-Assisted/methods , Phantoms, Imaging , Tomography, Emission-Computed, Single-Photon/methods , Tomography, Emission-Computed, Single-Photon/standards , Calibration , HumansABSTRACT
This study aimed to determine whether a bismuth-coated latex shield (B-shield) could protect the eyes during brain SPECT/CT. Methods: A shield containing the heavy metal bismuth (equivalent to a 0.15-mm-thick lead shield) was placed over a cylindric phantom and the eyes of a 3-dimensional brain phantom filled with 99mTc solution. Subsequently, phantoms with and without the B-shield were compared using SPECT/CT. The CT parameters were 30-200 mA and 130 kV. The dose reduction achieved by the B-shield was measured using a pencil-shaped ionization chamber. The protective effects of the B-shield were determined by evaluating relative radioactivity concentration as well as artifacts (changes in CT number), linear attenuation coefficients, and coefficients of variation on SPECT images. Results: The radiation doses with and without the B-shield were 0.14-0.77 and 0.36-1.93 mGy, respectively, and the B-shield decreased the average radiation dose by about 60%. The B-shield also increased the mean CT number, but only at locations just beneath the surface of the phantom. Streaks of higher density near the underside of the B-shield indicated beam hardening. Linear attenuation coefficients and the coefficients of variation did not significantly differ between phantoms with and without the B-shield, and the relative 99mTc radioactivity concentrations were not affected. Conclusion: The B-shield decreased the radiation dose without affecting estimated attenuation correction or radioactivity concentrations. Although surface artifacts increased with the B-shield, the quality of the SPECT images was acceptable. B-shields can help protect pediatric patients and patients with eye diseases who undergo SPECT imaging.
Subject(s)
Bismuth/chemistry , Brain/diagnostic imaging , Corneal Injuries/prevention & control , Eye Protective Devices , Radiation Exposure/prevention & control , Radiation Injuries/prevention & control , Single Photon Emission Computed Tomography Computed Tomography/instrumentation , Corneal Injuries/etiology , Equipment Design , Equipment Failure Analysis , Humans , Latex/chemistry , Latex/radiation effects , Materials Testing , Phantoms, Imaging , Radiation Exposure/analysis , Radiation Injuries/etiology , Single Photon Emission Computed Tomography Computed Tomography/adverse effectsABSTRACT
BACKGROUND: Both inflammation and neoangiogenesis contribute to abdominal aortic aneurysm (AAA) disease. Arg-Gly-Asp-based molecular imaging has been shown to detect the integrin αvß3. We studied a clinical dimeric (18)F-labeled Arg-Gly-Asp positron-emission tomography (PET) agent ((18)F-FPPRGD2) for molecular imaging of experimental AAAs. METHODS AND RESULTS: Murine AAAs were induced in Apo-E-deficient mice by angiotensin II infusion, with monitoring of aortic diameter on ultrasound. AAA (n=10) and saline-infused control mice (n=7) were injected intravenously with (18)F-FPPRGD2, as well as an intravascular computed tomography contrast agent, then scanned using a small-animal PET/computed tomography scanner. Aortic uptake of (18)F-FPPRGD2 was quantified by percentage-injected dose per gram and target-to- BACKGROUND: =0.003; median target-to- BACKGROUND: =0.0008). Ex vivo autoradiography demonstrated high uptake of (18)F-FPPRGD2 into the AAA wall, with immunohistochemistry showing substantial cluster of differentiation (CD)-11b(+) macrophages and CD-31(+) neovessels. Target-to- BACKGROUND: =-0.29, P=0.41) but did strongly correlate with both mural macrophage density (r=0.79, P=0.007) and neovessel counts (r=0.87, P=0.001) on immunohistochemistry. CONCLUSIONS: PET imaging of experimental AAAs using (18)F-FPPRGD2 detects biologically active disease, correlating to the degree of vascular inflammation and neoangiogenesis. This may provide a clinically translatable molecular imaging approach to characterize AAA biology to predict risk beyond size alone.
Subject(s)
Aortic Aneurysm, Abdominal/diagnostic imaging , Fluorodeoxyglucose F18 , Integrin alphaVbeta3/metabolism , Molecular Imaging/methods , Oligopeptides , Positron-Emission Tomography/methods , Animals , Aortic Aneurysm, Abdominal/metabolism , Diagnosis, Differential , Disease Models, Animal , Immunohistochemistry , Male , Mice , Radiopharmaceuticals , Reproducibility of ResultsABSTRACT
Spatial statistics is widely used in fields where analysis of large-scale distributions is performed, such as synoptic meteorology and geostatistics. We constructed a smoothing function as part of a fundamental study aimed at introducing spatial statistics to the Z score map of cerebral blood flow-single photon emission tomography (CBF-SPET) and examined the applicability of spatial statistics to CBF-SPET imaging. The free statistical processing language R was chosen as the development language, and the smoothing function was constructed by use of a kernel function, a thin-plate spline function, and the Bayesian method. A Gaussian function was used as the kernel function, and three values for the smoothing parameters (0.25, 0.5, standard deviation (SD)) were used. Furthermore, the smoothing parameters of the thin-plate spline function were estimated by use of generalized cross validation (GCV), the Gibbs sampling method was adopted for the Bayesian method, and the number of iterations and the value for the burn-in were set to 500 and 250, respectively. In performing the visual assessment of the source image and the smoothed image, there were no differences caused by the smoothing process. However, there were discrepancies in the contour map at each step of the smoothing iteration. Comparing the residual sum of squares of the source image and the resulting image after each smoothing iteration, the minimum and maximum values for the image after processing with a kernel function were 1.329x10(-11) and 21.96 when the smoothing parameters were 0.25 and SD, respectively. The smoothing function, which was examined for the purpose of applying the spatial statistical method to CBF-SPET imaging, successfully performed a smoothing without generating visible discrepancies when compared with the source image. In conclusion, our research showed that spatial statistics as performed by us is applicable as an analytical method for better cerebral blood flow-SPET imaging.