Wearable EMI Shielding Composite Films with Integrated Optimization of Electrical Safety, Biosafety and Thermal Safety.

Biomaterial-based flexible electromagnetic interference (EMI) shielding composite films are desirable in many applications of wearable electronic devices. However, much research focuses on improving the EMI shielding performance of materials, while optimizing the comprehensive safety of wearable EMI shielding materials has been neglected. Herein, wearable cellulose nanofiber@boron nitride nanosheet/silver nanowire/bacterial cellulose (CNF@BNNS/AgNW/BC) EMI shielding composite films with sandwich structure are fabricated via a simple sequential vacuum filtration method. For the first time, the electrical safety, biosafety, and thermal safety of EMI shielding materials are optimized integratedly. Since both sides of the sandwich structure contain CNF and BC electrical insulation layers, the CNF@BNNS/AgNW/BC composite films exhibit excellent electrical safety. Furthermore, benefiting from the AgNW conductive networks in the middle layer, the CNF@BNNS/AgNW/BC exhibit excellent EMI shielding effectiveness of 49.95 dB and ultra-fast response Joule heating performance. More importantly, the antibacterial property of AgNW ensures the biosafety of the composite films. Meanwhile, the AgNW and the CNF@BNNS layers synergistically enhance the thermal conductivity of the CNF@BNNS/AgNW/BC composite film, reaching a high value of 8.85 W m‒1 K‒1, which significantly enhances its thermal safety when used in miniaturized electronic device. This work offers new ideas for fabricating biomaterial-based EMI shielding composite films with high comprehensive safety.

Multi-interfaced Ni/C@RGO/PTFE composites for electromagnetic protection applications with high environmental stability and durability.

To efficiently address the growing electromagnetic pollution problem, it is urgently required to research high-performance electromagnetic materials that can effectively absorb or shield electromagnetic waves. In addition, the stability and durability of electromagnetic materials in complex practical environments is also an issue that needs to be noticed. Therefore, the starting point for our problem-solving is how to endow magnetic/dielectric multi-interfaced composite materials with excellent electromagnetic protection capability and environmental stability. In this study, magnetic/dielectric multi-interfaced Ni/carbon@reduced graphene oxide/polytetrafluoroethylene (Ni/C@RGO/PTFE) composites were developed to utilize as excellent EWA (electromagnetic wave absorption) and EMI (electromagnetic interference) shielding materials. Due to their diverse heterogeneous interfaces, rich conductive networks, and multiple loss mechanisms, the Ni/C@RGO/PTFE composite exhibits an optimal reflection loss of -61.48 dB and an effective absorption bandwidth of 7.20 GHz, with a filler loading of 5 wt%. Furthermore, Ni/C@RGO/PTFE composite films have an optimal absorption effectiveness value of 9.50 dB and an absorption coefficient of 0.49. Moreover, Ni/C@RGO/PTFE can hold high EWA performance in various corrosive media and maintain more than 90% of EMI shielding effectiveness, which can be attributed to the carbon coating and PTFE matrix acting as dual protective barriers for the susceptible metal Ni, thus obviously improving the stability and durability of composites. Overall, this work presents an effective strategy for the growth of high-performance EWA and EMI shielding materials with outstanding environmental stability and durability, which have wide application prospects in the future.

Dual (pH- and ROS-) Responsive Antibacterial MXene-Based Nanocarrier for Drug Delivery.

In this study, a novel MXene (Ti3C2Tx)-based nanocarrier was developed for drug delivery. MXene nanosheets were functionalized with 3, 3'-diselanediyldipropionic acid (DSeDPA), followed by grafting doxorubicin (DOX) as a model drug to the surface of functionalized MXene nanosheets (MXene-Se-DOX). The nanosheets were characterized using scanning electron microscopy, atomic force microscopy (AFM), transmission electron microscopy, energy-dispersive X-ray spectroscopy (EDX), nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and zeta potential techniques. The drug-loading capacity (17.95%) and encapsulation efficiency (41.66%) were determined using ultraviolet-visible spectroscopy. The lateral size and thickness of the MXene nanosheets measured using AFM were 200 nm and 1.5 nm, respectively. The drug release behavior of the MXene-Se-DOX nanosheets was evaluated under different medium conditions, and the nanosheets demonstrated outstanding dual (reactive oxygen species (ROS)- and pH-) responsive properties. Furthermore, the MXene-Se-DOX nanosheets exhibited excellent antibacterial activity against both Gram-negative E. coli and Gram-positive B. subtilis.

A Novel Diamine Containing Ester and Diphenylethane Groups for Colorless Polyimide with a Low Dielectric Constant and Low Water Absorption.

In this study, a novel diamine monomer containing ester and phenyl moieties, 1,2-diphenylethane-1,2-diyl bis(4-aminobenzoate) (1,2-DPEDBA), was synthesized through a three-step reaction. Using this diamine, a novel polyimide (PI) film was prepared with 4,4'-(hexafluoroisopropylidene)diphthalic anhydride (6-FDA) as a counter dianhydride through a typical two-step chemical imidization. For comparison, poly(pyromellitic dianhydride-co-4,4'-oxydianiline) (PMDA-ODA PI) was also synthesized via thermal imidization. The resulting 6-FDA-DPEDBA PI film was not only soluble in common polar solvents with high boiling points, such as N,N-dimethylacetamide (DMAc) and N,N-dimethylformamide (DMF), but also soluble in common low-boiling-point polar solvents, such as chloroform (CHCl3) and dichloromethane (CH2Cl2), at room temperature. The resulting novel PI showed a 5% weight loss temperature (T5d) at 360 °C under a nitrogen atmosphere. The resulting PI film was colorless and transparent with a transmittance of 87.1% in the visible light region ranging from 400 to 760 nm. The water absorption of the novel PI film was of 1.78%. The PI film also possessed a good moisture barrier and hydrophobicity. Furthermore, the resulting PI film displayed a low dielectric constant of 2.17 at 106 Hz at room temperature. In conclusion, the novel PI film exhibited much better optical transparency, lower moisture absorption, and a lower dielectric constant as well as better solubility than the PMDA-ODA PI film, which is insoluble in any solvent, although its thermal stability is not better than that of PMDA-ODA PI.

Crown-Ether-Modified SBA-15 for the Adsorption of Cr(VI) and Zn(II) from Water.

Recently, the release of some metal ions to the environment has been observed to cause serious damages to human health and the environment. Herein, a chromium(VI)- and zinc(II)-selective adsorbent (CB18crown6/SBA-15) was successfully fabricated through the covalent attachment of 4'-carboxybenzo-18-crown-6 (CB18crown6) as a ligand on mesoporous silica support (SBA-15). The CB18crown6/SBA-15 adsorbent was characterized by Fourier-transform infrared (FTIR) spectrometry, X-ray diffraction (XRD), N2 adsorption-desorption, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). To evaluate its ability to selectively capture Cr(VI) and Zn(II), adsorption experiments were conducted. The influences of pH, initial concentration of metal ions, and coexisting metal ions on the adsorption process were examined. The CB18crown6/SBA-15 selectively adsorbed Cr(VI) at pH 2 and Zn(II) at pH 5, respectively, from the mixed aqueous solutions of chromium, zinc, lithium, cadmium, cobalt, strontium, and cesium ions. The data for the adsorption of Cr(VI) onto the CB18crown6/SBA-15 were well explained by the Langmuir adsorption isotherm. In addition, the recycling and reuse of CB18crown6/SBA-15 was successfully achieved, and 71 and 76% reuse efficiency of Cr(VI) and Zn(II), respectively, was obtained after five cycles. This study suggests that the use of the CB18crown6/SBA-15 can be a feasible approach for the selective remediation of Cr(VI) and Zn(II) contamination.