Enhanced Chromium (VI) Removal by Micron-Scale Zero-Valent Iron Pretreated with Aluminum Chloride under Aerobic Conditions.

Micron-scale zero-valent iron (ZVI)-based material has been applied for hexavalent chromium (Cr(VI)) decontamination in wastewater treatment and groundwater remediation, but the passivation problem has limited its field application. In this study, we combined aluminum chloride solution with ZVI (pcZVI-AlCl3) to enhance Cr(VI) removal behavior under aerobic conditions. The optimal pre-corrosion conditions were found to be 2.5 g/L ZVI, 0.5 mM AlCl3, and a 4 h preconditioning period. Different kinds of techniques were applied to detect the properties of preconditioned ZVI and corrosion products. The 57Fe Mössbauer spectra showed that proportions of ZVI, Fe3O4, and FeOOH in pcZVI-AlCl3 were 49.22%, 34.03%, and 16.76%, respectively. The formation of Al(OH)3 in the corrosion products improved its pHpzc (point of zero charge) for Cr(VI) adsorption. Continuous-flow experiments showed its great potential for Cr(VI) removal in field applications. The ZVI and corrosion products showed a synergistic effect in enhancing electron transfer for Cr(VI) removal. The mechanisms underlying Cr(VI) removal by pcZVI-AlCl3 included adsorption, reduction, and precipitation, and the contribution of adsorption was less. This work provides a new strategy for ZVI pre-corrosion to improve its longevity and enhance Cr(VI) removal.

64 picosecond time resolved time-correlated single photon counting imaging.

High-speed imaging of dynamic scenes is a challenging and important task in many applications. However, conventional imaging methods based on charge coupled devices or complementary metal oxide semiconductors have limitations in temporal resolution and photon sensitivity. To address this problem, we propose a novel high-speed imaging scheme that combines single-pixel imaging with single photon detection and time-correlated single photon counting. Our scheme can achieve high-speed imaging with 64 ps resolution by repeating the motion scenes and using binary outputs from single photon detectors. We demonstrate our scheme by reconstructing the switching process of a digital micro-mirror device and a liquid crystal spatial light modulator. Our scheme can be further improved to 1 ps resolution by using a more accurate time-correlated single photon counting system. Moreover, our scheme can adapt to different speed scenes by adjusting the temporal resolution and reducing the sampling time. Our high temporal resolution imaging scheme further expands the application areas of single-pixel imaging and provides solutions for scenes requiring single photon detection and higher temporal resolution, such as reproducible chemical reaction processes imaging, cellular or sub-cellular bio imaging, single-molecule imaging of rotary motors, high-speed equipment inspection, and other periodic high-speed scenes imaging.

Community composition of phytopathogenic fungi significantly influences ectomycorrhizal fungal communities during subtropical forest succession.

Ectomycorrhizal fungi (EMF) can form symbiotic relationships with plants, aiding in plant growth by providing access to nutrients and defense against phytopathogenic fungi. In this context, factors such as plant assemblages and soil properties can impact the interaction between EMF and phytopathogenic fungi in forest soil. However, there is little understanding of how these fungal interactions evolve as forests move through succession stages. In this study, we used high-throughput sequencing to investigate fungal communities in young, intermediate, and old subtropical forests. At the genus level, EMF communities were dominated by Sebacina, Russula, and Lactarius, while Mycena was the most abundant genus in pathogenic fungal communities. The relative abundances of EMF and phytopathogenic fungi in different stages showed no significant difference with the regulation of different factors. We discovered that interactions between phytopathogenic fungi and EMF maintained a dynamic balance under the influence of the differences in soil quality attributed to each forest successional stage. The community composition of phytopathogenic fungi is one of the strong drivers in shaping EMF communities over successions. In addition, the EMF diversity was significantly related to plant diversity, and these relationships varied among successional stages. Despite the regulation of various factors, the positive relationship between the diversity of phytopathogenic fungi and EMF remained unchanged. However, there is no significant difference in the ratio of the abundance of EMF and phytopathogenic fungi over the course of successions. These results will advance our understanding of the biodiversity-ecosystem functioning during forest succession. KEY POINTS: •Community composition of both EMF and phytopathogenic fungi changed significantly over forest succession. •Phytopathogenic fungi is a key driver in shaping EMF community. •The effect of plant Shannon's diversity on EMF communities changed during the forest aging process.

Delving Into the Devils of Bird's-Eye-View Perception: A Review, Evaluation and Recipe.

Learning powerful representations in bird's-eye-view (BEV) for perception tasks is trending and drawing extensive attention both from industry and academia. Conventional approaches for most autonomous driving algorithms perform detection, segmentation, tracking, etc., in a front or perspective view. As sensor configurations get more complex, integrating multi-source information from different sensors and representing features in a unified view come of vital importance. BEV perception inherits several advantages, as representing surrounding scenes in BEV is intuitive and fusion-friendly; and representing objects in BEV is most desirable for subsequent modules as in planning and/or control. The core problems for BEV perception lie in (a) how to reconstruct the lost 3D information via view transformation from perspective view to BEV; (b) how to acquire ground truth annotations in BEV grid; (c) how to formulate the pipeline to incorporate features from different sources and views; and (d) how to adapt and generalize algorithms as sensor configurations vary across different scenarios. In this survey, we review the most recent works on BEV perception and provide an in-depth analysis of different solutions. Moreover, several systematic designs of BEV approach from the industry are depicted as well. Furthermore, we introduce a full suite of practical guidebook to improve the performance of BEV perception tasks, including camera, LiDAR and fusion inputs. At last, we point out the future research directions in this area. We hope this report will shed some light on the community and encourage more research effort on BEV perception.

Multiple interaction networks reveal that Lepidoptera larvae and adults prefer various host plants for diet and pollination.

Plant-Lepidoptera interactions are often studied using the pollination or herbivore networks only. Lepidoptera species are involved in two types of plant-insect interactions because they are herbivores as larvae and pollinators as adults. The study of entangled networks is critical, since the interaction of different networks can affect the overall network and community stability. Here, we studied the interaction of plants and Lepidoptera on the Yongxing Island, South China Sea. A plant-lepidopteran pollination network and a plant-lepidopteran herbivore network were built by using data from flower-pollinator and leaf-herbivore interactions. We then combined the two networks into a single network. We measured plant composition similarity within each sub-network and across sub-networks for Lepidoptera species. Our findings indicate that the plant-Lepidoptera pollination network and the herbivory network share significant proportions of Lepidoptera but small proportions of plant assemblages. The pollination network had higher nestedness and connectance than the herbivore network. Agrius convolvuli was the most specialized species, while Zizina otis had the highest species strength in the pollination network. Most Lepidoptera species were highly specialized in the herbivore network and their importance positively correlated across the two networks. Furthermore, there was no dietary composition similarity between the two networks for most Lepidoptera species. Our findings highlight the visible structural difference between the pollination and the herbivore networks. Adult Lepidoptera selects different plants for oviposition and feeding, a strategy that may benefit their reproduction and survival by sustaining adequate resources for their two life stages and the diversity of both plants and insects in oceanic island communities.

A novel calcium peroxide/attapulgite-Fe(II) process for high concentration phosphate removal and recovery: Efficiency and mechanism.

Phosphorus (P) has been overused in livestock farming, which inevitably results in high-concentration P-containing wastewater. Managing total phosphorus discharge is important to prevent eutrophication in aquatic environments, thus it is critical to develop new technologies for the removal and recovery of high-concentration phosphate. In this study, a novel calcium peroxide/attapulgite (CP/ATP) composite was developed and coupled with Fe(II) for high-concentration phosphate removal and recovery. The results demonstrated that the optimal dosage of the CP/ATP-Fe(II) process was CP/ATP = 0.25 g/L and Fe(II) = 2 mM. The pH effect on phosphate removal was minimal, while phosphate removal efficiency rose by 16.7% with the temperature increased from 10 °C to 25 °C. The co-existing ions exhibited little effect on phosphate removal, and the CP/ATP-Fe(II) process showed effective phosphate removal from the real piggery wastewater. The P content of the precipitates after phosphate removal by this process was as high as 25.82%, indicating its good potential for P recycling. A significant synergistic effect existed in CP/ATP and Fe(II) for phosphate removal, and the SEM-EDS, XRD, Raman and XPS characterization exhibited that the phosphate removal mainly relied on the in-situ-formed Fe(III) and the participation of calcium (Ca) species. Co-precipitation was the predominant mechanism for phosphate removal, and the proportions of Fe(III)-P, Ca-P and Ca-Fe(III)-P in the precipitates were 51.5%, 31.2% and 17.3%, respectively. This study provides a highly efficient process for phosphate removal and recovery from wastewater, and insights into interactions among phosphorus, iron and calcium.

Effect of Culture Conditions on Cellulose Production by a Komagataeibacter xylinus Strain.

Bacterial cellulose (BC) is an abundant biopolymer with a wide range of potential industrial applications. However, the industrial application of BC has been hampered by inefficient production. This study aims to investigate the influence of a spontaneous mutation that results in decreased cellulose production by a Komagataeibacter xylinus strain. The yields of cellulose are significantly different under different culture conditions, which imply that the shearing force is responsible for the selection of spontaneous mutants. Fermenter culture conditions under shake-flask culture conditions are further simulated. The shearing force activates the conversion of microbial cells to Cel- mutants, and the accumulation of water-soluble exopolysaccharides is observed. The Cel+ cells under agitated culture are not easily converted into Cel- mutants upon the addition of water-soluble exopolysaccharides synthesized by K. xylinus and a viscous polysaccharide, such as xanthan gum. The conversion ratio of Cel+ cells to Cel- mutants is strongly related to the shearing force and viscosity of the fermentation broth. The synthetic pathways of bacterial cellulose and water-soluble polysaccharides are independent of each other at the genetic level. However, a substrate competitive relationship between these two polysaccharides is found, which is significant in terms of the optimization of cellulose production in commercial processes.

Bacterial cellulose-based biomaterials: From fabrication to application.

Driven by its excellent physical and chemical properties, BC (bacterial cellulose) has achieved significant progress in the last decade, rendering with many novel applications. Due to its resemblance to the structure of extracellular matrix, BC-based biomaterials have been widely explored for biomedical applications such as tissue engineering and drug delivery. The recent advances in nanotechnology endow further modifications on BC and generate BC-based composites for different applications. This article presents a review on the research advancement on BC-based biomaterials from fabrication methods to biomedical applications, including wound dressing, artificial skin, vascular tissue engineering, bone tissue regeneration, drug delivery, and other applications. The preparation of these materials and their potential applications are reviewed and summarized. Important factors for the applications of BC in biomedical applications including degradation and pore structure characteristic are discussed in detail. Finally, the challenges in future development and potential advances of these materials are also discussed.

Wnt/ß-catenin signalling promotes more effective fracture healing in aged mice than in adult mice by inducing angiogenesis and cell differentiation.

To investigate whether activating the Wnt/ß-catenin signalling pathway differentially promotes fracture healing in aged and adult individuals. CatnbTM2Kem, Catnblox(ex3) and wild-type adult and aged mice were used in this study. The femur was electroporated through a hole with a diameter of 0.6 mm. On the 7th, 14th and 21st days after fracture establishment, repair of the femoral diaphyseal bone was examined using X-ray and CT, the levels of mRNAs related to Wnt/ß-catenin signalling were detected using real-time polymerase chain reaction (RT-PCR), and angiogenesis and cell differentiation were observed using immunohistochemistry. The numbers of osteoclasts were determined by TRAP staining. Wnt/ß-catenin activation accelerated fracture healing in adult mice, with more pronounced effects on aged mice. Compared with wild-type mice at the corresponding ages, Wnt/ß-catenin signalling activation induced higher levels of angiogenesis and cell differentiation in aged mice than in adult mice and promoted fracture healing. The administration of medications targeting Wnt/ß-catenin signalling to aged patients may accelerate fracture healing to a greater extent.

One-pot green synthesis of I@CNDs-Fe3O4 hybrid nanoparticles from kelp for multi-modal imaging in vivo.

Multi-modal imaging technologies are playing an increasingly important role in biomedical research. However, there remains a demanding challenge to develop biocompatible contrast agents via a simple, green synthetic route for multi-modal imaging. Here we report the synthesis and applications of a new contrast agent for triple-modal imaging, that is, iodine-containing N-doping carbon nano-dots hybridized with Fe3O4 nanoparticles (I@CNDs-Fe3O4). We develop a one-pot, environment friendly hydrothermal method to synthesize the hybrid nanoparticles, primarily using kelp as the bioresource. I@CNDs-Fe3O4 nanoparticles have been demonstrated to exhibit excellent multi-modal imaging capabilities, including wavelength-tunable fluorescent imaging, X-ray attenuation for CT imaging enhancement, and T2-Weighted MR imaging. Importantly, the formulation of the hybrid nanoparticle provides an optimal solution to address the disequilibrium of osmotic pressure caused by the conventional CT imaging contrast agents of iodine compounds. The I@CNDs-Fe3O4 nanoparticles promise important applications in multi-modal imaging technologies in vivo as a versatile and biocompatible contrast agent.

Linear-Organic-Polymer-Supported Iridium Complex as a Recyclable Auto-Tandem Catalyst for the Synthesis of Quinazolinones via Selective Hydration/Acceptorless Dehydrogenative Coupling from o-Aminobenzonitriles.

A linear-organic-polymer-supported iridium complex Cp*Ir@P4VP, which is designed and synthesized by the coordinative immobilization of [Cp*IrCl2]2 on poly(4-vinylpyridine), was proven to be an efficient heterogeneous autotandem catalyst for synthesizing quinazolinones via selective hydration/acceptorless dehydrogenative coupling from o-aminobenzonitriles. Furthermore, the synthesized catalyst was recycled five times without an obvious decrease in the catalytic activity.

N-Methylation of Amines with Methanol in the Presence of Carbonate Salt Catalyzed by a Metal-Ligand Bifunctional Ruthenium Catalyst [(p-cymene)Ru(2,2'-bpyO)(H2O)].

A ruthenium complex [(p-cymene)Ru(2,2'-bpyO)(H2O)] was found to be a general and efficient catalyst for the N-methylation of amines with methanol in the presence of carbonate salt. Moreover, a series of sensitive substituents, such as nitro, ester, cyano, and vinyl groups, were tolerated under present conditions. It was confirmed that OH units in the ligand are crucial for the catalytic activity. Notably, this research exhibited the potential of metal-ligand bifunctional ruthenium catalysts for the hydrogen autotransfer process.

Toxicity assessment of synthesized titanium dioxide nanoparticles in fresh water algae Chlorella pyrenoidosa and a zebrafish liver cell line.

This study aims to assess the toxicity of the commonly-spread titanium dioxide nanoparticles (TiO2 NPs) by evaluating the exposure impact of the particles on both freshwater algae Chlorella pyrenoidosa and zebrafish liver cell line (ZFL), the two common in vitro models in toxicological studies. To compare the toxic effects of TiO2 NPs with different physiochemical properties, three types of manufactured TiO2 were used: bulk TiO2, Degussa P25 TiO2, and ultrafine TiO2 NPs. Both short and long-term biological responses of green algae, such as the effect on the cell growth rate, pigment autofluorescence, and esterase activity were investigated. The dosage, physical property of TiO2 particles, and their interactions with algal cells affect cellular growth, especially after short-term exposure. The hydrodynamic size plays a critical role in determining the acute toxicity to C. pyrenoidosa in terms of autofluorescence and esterase activity, while all types of TiO2 NPs show toxic effects after exposure for 14 days. However, this observation is not seen when studying the effect of introduced particles in ZFL, for the precipitated Degussa P25 TiO2 showed the highest cellular inhibition. Interestingly, despite the obvious overall toxicity toward C. pyrenoidosa, the photocatalytical properties of TiO2 NPs may contribute to the enhanced photosynthesis in the low concentration range (<40 µg mL-1). Overall, we found that the physical interactions between TiO2 particles and the cells, particles' size and dispersibility play critical role in the cytotoxic effect for both algal and ZFL cells, while the photocatalytical properties of TiO2 particles may produce mixed effects on the cytotoxicity of green algae.

The increase in bone resorption in early-stage type I diabetic mice is induced by RANKL secreted by increased bone marrow adipocytes.

Bone marrow adipose tissue (BMAT) has recently been found to induce osteoclastogenesis by secreting RANKL. Although Type 1 diabetes mellitus (T1DM) has been reported to be associated with increased BMAT and bone loss, little is known about the relationship between BMAT and osteoclasts in T1DM. We studied the role of BMAT in the alterations of osteoclast activities in early-stage T1DM, by using a streptozotocin-induced T1DM mouse model. Our results showed that osteoclast activity was enhanced in the long bones of T1DM mice, accompanied by increased protein expression of RANKL. However, RANKL mRNA levels in bone tissues of T1DM mice remained unchanged. Meanwhile, we found that BMAT was significantly increased in the long bones of T1DM mice, and both mRNA and protein levels of RANKL were elevated in the diabetic BMAT. More importantly, RANKL protein was mainly expressed on the cell membranes of the increased adipocytes, most of which were located next to the metaphyseal region. These results suggest that the enhanced bone resorption in early-stage diabetic mice is induced by RANKL derived from BMAT rather than the bone tissue itself.

Different effects of Wnt/ß-catenin activation and PTH activation in adult and aged male mice metaphyseal fracture healing.

BACKGROUND: Fractures in older men are not uncommon and need to be healed as soon as possible to avoid related complications. Anti-osteoporotic drugs targeting Wnt/ß-catenin and PTH (parathyroid hormone) to promote fracture healing have become an important direction in recent years. The study is to observe whether there is a difference in adult and aged situations by activating two signal paths. METHODS: A single cortical hole with a diameter of 0.6 mm was made in the femoral metaphysis of Catnblox(ex3) mice and wild-type mice. The fracture healing effects of CA (Wnt/ß-catenin activation) and PTH (activated by PTH (1-34) injections) were assessed by X-ray and CT imaging on days 7, 14, and 21 after fracture. The mRNA levels of ß-catenin, PTH1R(Parathyroid hormone 1 receptor), and RUNX2(Runt-related transcription factor 2) in the fracture defect area were detected using RT-PCR. Angiogenesis and osteoblasts were observed by immunohistochemistry and osteoclasts were observed by TRAP (Tartrate-resistant Acid Phosphatase). RESULT: Adult CA mice and adult PTH mice showed slightly better fracture healing than adult wild-type (WT) mice, but there was no statistical difference. Aged CA mice showed better promotion of angiogenesis and osteoblasts and better fracture healing than aged PTH mice. CONCLUSION: The application of Wnt/ß-catenin signaling pathway drugs for fracture healing in elderly patients may bring better early effects than PTH signaling pathway drugs, but the long-term effects need to be observed.

Preactivation of ß-catenin in osteoblasts improves the osteoanabolic effect of PTH in type 1 diabetic mice.

Type 1 diabetes (T1D) is correlated with osteopenia primarily due to low bone formation. Parathyroid hormone (PTH) is a known anabolic agent for bone, the anabolic effects of which are partially mediated through the Wnt/ß-catenin signaling pathway. In the present study, we first determined the utility of intermittent PTH treatment in a streptozotocin-induced T1D mouse model. It was shown that the PTH-induced anabolic effects on bone mass and bone formation were attenuated in T1D mice compared with nondiabetic mice. Further, PTH treatment failed to activate ß-catenin signaling in osteoblasts of T1D mice and was unable to improve osteoblast proliferation and differentiation. Next, the Col1-3.2 kb-CreERTM; ß-cateninfx(ex3) mice were used to conditionally activate ß-catenin in osteoblasts by injecting tamoxifen, and we addressed whether or not preactivation of ß-catenin boosted the anabolic action of PTH on T1D-related bone loss. The results demonstrated that pretreatment with activation of osteoblastic ß-catenin followed by PTH treatment outperformed PTH or ß-catenin activation monotherapy and led to greatly improved bone structure, bone mass, and bone strength in this preclinical model of T1DM. Further analysis demonstrated that osteoblast proliferation and differentiation, as well as osteoprogenitors in the marrow, were all improved in the combination treatment group. These findings indicated a clear advantage of developing ß-catenin as a target to improve the efficacy of PTH in the treatment of T1D-related osteopenia.

Progress on combat damage control resuscitation/surgery and its application in the Chinese People's Liberation Army.

Damage control resuscitation (DCR) and damage control surgery (DCS) has now been developed as a well-established standard of care for severely injured civilian patients worldwide. On the other hand, the application of combat DCR/DCS has saved the lives of thousands of severely injured casualties in several wars during the last two decades. This article describes the great progress on DCR/DCS in the last two decades and its application in the Chinese People's Liberation Army (PLA). The main development of the advanced theories of combat DCR/DCS including the global integration of DCR/DCS, application of remote battlefield DCR, balanced hemostatic resuscitation in combat hospitals and enhancement of en route DCR. There are two key factors that determine the feasibility of combat DCR: one is the availability of resources and supplies to implement the advanced theories of combat DCR/DCS, the other is the availability of qualified personnel who master the skills needed for the implementation of DCR/DCS. In the PLA, the advanced theories of combat DCR/DCS have now been widely accepted, and some of related advanced products, such as fresh-frozen plasma, packed red blood cells, and platelets, have been available in Level III medical facilities. In conclusion, great progress in combat DCR/DCS has been achieved in recent years, and the Chinese PLA is keeping good pace with this development, although there is still room for improvement.

Different effects of Wnt/ß-catenin activation and parathyroid hormone on diaphyseal and metaphyseal in the early phase of femur bone healing of mice.

Parathyroid hormone (PTH) and agents related to the manipulation of Wnt/ß-catenin signalling are two promising anabolic anti-osteoporotic therapies that have been shown to promote the healing of bone fractures. Now, it is widely accepted that cortical bone and trabecular bone are two different compartments, and should be treated as separate compartments in pathological processes, such as fracture healing. It is currently unknown whether PTH and the activation of ß-catenin signalling would demonstrate different effects on cortical bone and trabecular bone healing. In the current study, single 0.6-mm cortex holes were made in the femur metaphysis and diaphysis of mice, and then, PTH application and ß-catenin activation were used to observe the promoting effect on bone healing. The effects of ß-catenin and PTH signalling on fracture healing were observed by X-ray and CT at 3, 6, and 14 days after fracture, and the levels of ß-catenin were detected by RT-PCR assay, and the number of specific antigen-positive cells of BRDU, OCN, RUNX2 was counted by immunohistochemical staining. While ß-catenin activation and PTH were found to demonstrate similar effects on accelerating metaphyseal bone healing, activation of ß-catenin showed a more striking effect than PTH on promoting diaphyseal bone healing. These findings might be helpful for selecting proper medication to accelerate fracture healing of different bone compartments.

Chinese expert consensus on the treatment of modern combat-related spinal injuries.

The battlefield treatments of spinal and spinal cord injury vary from civilian settings. However, there is no unified battlefield treatment guidelines for spine trauma in PLA. An expert consensus is reached, based on spine trauma epidemiology and the concepts of battlefield treatment combined with the existing levels of military medical care in modern warfare. Since the specialized treatment for spine trauma are no significant difference between civilian settings and modern war, the first aid, emergency treatment and early treatment of spine trauma are introduced separately in three levels in this consensus. In Level I facilities, the fast and accurate evaluation of spine trauma followed by fixation and stabilization are recommended during the first-aid stage. Re-evaluation, further treatment for possible hemorrhagic shock, dyspnea and infection are recommended at Level II facilities. At Level III facilities, it is recommended to strengthen the intensive care and the prevention of urinary system and lung infection for the wounded with severe spinal injury, however, spinal surgery is not recommended in a battlefield hospital. The grading standard for evidence evaluation and recommendation was used to reach this expert consensus.

Doping Nanoscale Graphene Domains Improves Magnetism in Hexagonal Boron Nitride.

Carbon doping can induce unique and interesting physical properties in hexagonal boron nitride (h-BN). Typically, isolated carbon atoms are doped into h-BN. Herein, however, the insertion of nanometer-scale graphene quantum dots (GQDs) is demonstrated as whole units into h-BN sheets to form h-CBN. The h-CBN is prepared by using GQDs as seed nucleations for the epitaxial growth of h-BN along the edges of GQDs without the assistance of metal catalysts. The resulting h-CBN sheets possess a uniform distrubution of GQDs in plane and a high porosity macroscopically. The h-CBN tends to form in small triangular sheets which suggests an enhanced crystallinity compared to the h-BN synthesized under the same conditions without GQDs. An enhanced ferromagnetism in the h-CBN emerges due to the spin polarization and charge asymmetry resulting from the high density of CN and CB bonds at the boundary between the GQDs and the h-BN domains. The saturation magnetic moment of h-CBN reaches 0.033 emu g-1 at 300 K, which is three times that of as-prepared single carbon-doped h-BN.