ABSTRACT
Materials with field-tunable polarization are of broad interest to condensed matter sciences and solid-state device technologies. Here, using hydrogen (H) donor doping, we modify the room temperature metallic phase of a perovskite nickelate NdNiO3 into an insulating phase with both metastable dipolar polarization and space-charge polarization. We then demonstrate transient negative differential capacitance in thin film capacitors. The space-charge polarization caused by long-range movement and trapping of protons dominates when the electric field exceeds the threshold value. First-principles calculations suggest the polarization originates from the polar structure created by H doping. We find that polarization decays within ~1 second which is an interesting temporal regime for neuromorphic computing hardware design, and we implement the transient characteristics in a neural network to demonstrate unsupervised learning. These discoveries open new avenues for designing ferroelectric materials and electrets using light-ion doping.
ABSTRACT
Superconducting-based electronic devices have shown great potential for future quantum computing applications. One key building block device is a superconducting field-effect transistor based on a superconductor-semiconductor-superconductor Josephson-junction (JJ) with a gate-tunable semiconducting channel. However, the performance of such devices is highly dependent on the quality of the superconductor to semiconductor interface. In this study, we present an alternative method to obtain a high-quality interface by using intimate contact. We investigate the proximity-induced superconductivity in chiral crystal tellurium (Te) and fabricate a PdxTe-Te-PdxTe JJ with an ambipolar supercurrent that is gate-tunable and exhibits multiple Andreev reflections. The semiconducting two-dimensional Te single crystal is grown hydrothermally and partially converted to superconducting PdxTe by controlled annealing. Our work demonstrates a promising path for realizing controllable superconducting electronic devices with high-quality superconducting interfaces; thus, we can continue to advance the field of quantum computing and other interface-based technologies.
ABSTRACT
Dynamic tuning of thermal transport in solids is scientifically intriguing with wide applications for thermal transport control in electronic devices. In this work, we demonstrate a thermal transistor, a device in which heat flow can be regulated using external control, realized in a topological insulator (TI) through the topological surface states. The tuning of thermal transport is achieved by using optical gating of a thin dielectric layer deposited on the TI film. The gate-dependent thermal conductivity is measured using micro-Raman thermometry. The transistor has a large ON/OFF ratio of 2.8 at room temperature and can be continuously and repetitively switched in tens of seconds by optical gating and potentially much faster by electrical gating. Such thermal transistors with a large ON/OFF ratio and fast switching times offer the possibilities of smart thermal devices for active thermal management and control in future electronic systems.
ABSTRACT
Amorphous oxide semiconductor transistors have been a mature technology in display panels for upward of a decade, and have recently been considered as promising back-end-of-line compatible channel materials for monolithic 3D applications. However, achieving high-mobility amorphous semiconductor materials with comparable performance to traditional crystalline semiconductors has been a long-standing problem. Recently it has been found that greatly reducing the thickness of indium oxide, enabled by an atomic layer deposition (ALD) process, can tune its material properties to achieve high mobility, high drive current, high on/off ratio, and enhancement-mode operation at the same time, beyond the capabilities of conventional oxide semiconductor materials. In this work, the history leading to the re-emergence of indium oxide, its fundamental material properties, growth techniques with a focus on ALD, state-of-the-art indium oxide device research, and the bias stability of the devices are reviewed.
ABSTRACT
Filamentary-type resistive switching devices, such as conductive bridge random-access memory and valence change memory, have diverse applications in memory and neuromorphic computing. However, the randomness in filament formation poses challenges to device reliability and uniformity. To overcome this issue, various defect engineering methods have been explored, including doping, metal nanoparticle embedding, and extended defect utilization. In this study, we present a simple and effective approach using self-assembled uniform Au nanoelectrodes to controll filament formation in HfO2 resistive switching devices. By concentrating the electric field near the Au nanoelectrodes within the BaTiO3 matrix, we significantly enhanced the device stability and reduced the threshold voltage by up to 45% in HfO2-based artificial neurons compared to the control devices. The threshold voltage reduction is attributed to the uniformly distributed Au nanoelectrodes in the insulating matrix, as confirmed by COMSOL simulation. Our findings highlight the potential of nanostructure design for precise control of filamentary-type resistive switching devices.
ABSTRACT
Tellurium (Te) is an elemental semiconductor with a simple chiral crystal structure. Te in a two-dimensional (2D) form synthesized by a solution-based method shows excellent electrical, optical, and thermal properties. In this work, the chirality of hydrothermally grown 2D Te is identified and analyzed by hot sulfuric acid etching and high-angle tilted high-resolution scanning transmission electron microscopy. The gate-tunable nonlinear electrical responses, including the nonreciprocal electrical transport in the longitudinal direction and the nonlinear planar Hall effect in the transverse direction, are observed in 2D Te under a magnetic field. Moreover, the nonlinear electrical responses have opposite signs in left- and right-handed 2D Te due to the opposite spin polarizations ensured by the chiral symmetry. The fundamental relationship between the spin-orbit coupling and the crystal symmetry in two enantiomers provides a viable platform for realizing chirality-based electronic devices by introducing the degree of freedom of chirality into electron transport.
ABSTRACT
Chirality arises from the asymmetry of materials, where two counterparts are the mirror image of each other. The interaction between circular-polarized light and quantum materials is enhanced in chiral space groups due to the structural chirality. Tellurium (Te) possesses the simplest chiral crystal structure, with Te atoms covalently bonded into a spiral atomic chain (left- or right-handed) with a periodicity of 3. Here, we investigate the tunable circular photoelectric responses in 2D Te field-effect transistors with different chirality, including the longitudinal circular photogalvanic effect induced by the radial spin texture (electron-spin polarization parallel to the electron momentum direction) and the circular photovoltaic effect induced by the chiral crystal structure (helical Te atomic chains). Our work demonstrates the controllable manipulation of the chirality degree of freedom in materials.
ABSTRACT
High drive current is a critical performance parameter in semiconductor devices for high-speed, low-power logic applications or high-efficiency, high-power, high-speed radio frequency (RF) analogue applications. In this work, we demonstrate an In2O3 transistor grown by atomic layer deposition (ALD) at back-end-of-line (BEOL) compatible temperatures with a record high drain current in planar FET, exceeding 10 A/mm, the performance of which is 2-3 times better than all known transistors with semiconductor channels. A high transconductance reaches 4 S/mm, recorded among all transistors with a planar structure. Planar FETs working ballistically or quasi-ballistically are exploited as one of the simplest platforms to investigate the intrinsic transport properties. It is found experimentally and theoretically that a high carrier density and high electron velocity both contribute to this high on-state performance in ALD In2O3 transistors, which is made possible by the high-quality oxide/oxide interface, the metal-like charge-neutrality-level (CNL) alignment, and the high band velocities induced by the low density-of-state (DOS). Experimental Hall, I-V, and split C-V measurements at room temperature confirm a high carrier density of up to 6-7 × 1013 /cm2 and a high velocity of about 107 cm/s, well-supported by density functional theory (DFT) calculations. The simultaneous demonstration of such high carrier concentration and average band velocity is enabled by the exploitation of the ultrafast pulse scheme and heat dissipation engineering.
ABSTRACT
The van der Waals layered material CuInP2S6 features interesting functional behavior, including the existence of four uniaxial polarization states, polarization reversal against the electric field through Cu ion migration, a negative-capacitance regime, and reversible extraction of Cu ions. At the heart of these characteristics lies the high mobility of Cu ions, which also determines the spontaneous polarization. Therefore, Cu migration across the lattice results in unusual ferroelectric behavior. Here, we demonstrate how the interplay of polar and ionic properties provides a path to ionically controlled ferroelectric behavior, achieved by applying selected DC voltage pulses and subsequently probing ferroelectric switching during fast triangular voltage sweeps. Using current measurements and theoretical calculations, we observe that increasing DC pulse duration results in higher ionic currents, the buildup of an internal electric field that shifts polarization loops, and an increase in total switchable polarization by â¼50% due to the existence of a high polarization phase which is stabilized by the internal electric field. Apart from tuning ferroelectric behavior by selected square pulses, hysteretic polarization switching can even be entirely deactivated and reactivated, resulting in three-state systems where polarization switching is either inhibited or can be performed in two different directions.
ABSTRACT
Magnetoacoustic waves generated in piezoelectric and ferromagnetic coupled nanocomposite films through magnetically driven surface acoustic waves present great promise of loss-less data transmission. In this work, ferromagnetic metals of Ni, Co and Co x Ni1-x are coupled with a piezoelectric ZnO matrix in a vertically-aligned nanocomposite (VAN) thin film platform. Oxidation was found to occur in the cases of ZnO-Co, forming a ZnO-CoO VAN, while only very minor oxidation was found in the case of ZnO-Ni VAN. An alloy approach of Co x Ni1-x has been explored to overcome the oxidation during growth. Detailed microstructural analysis reveals limited oxidation of both metals and distinct phase separation between the ZnO and the metallic phases. Highly anisotropic properties including anisotropic ferromagnetic properties and hyperbolic dielectric functions are found in the ZnO-Ni and ZnO-Co x Ni1-x systems. The magnetic metal-ZnO-based hybrid metamaterials in this report present great potential in coupling of optical, magnetic, and piezoelectric properties towards future magnetoacoustic wave devices.
ABSTRACT
Nano-membrane tri-gateß-gallium oxide (ß-Ga2O3) field-effect transistors (FETs) on SiO2/Si substrate fabricated via exfoliation have been demonstrated for the first time. By employing electron beam lithography, the minimum-sized features can be defined with the footprint channel width of 50 nm. For high-quality interface betweenß-Ga2O3and gate dielectric, atomic layer-deposited 15 nm thick aluminum oxide (Al2O3) was utilized with tri-methyl-aluminum (TMA) self-cleaning surface treatment. The fabricated devices demonstrate extremely low subthreshold slope (SS) of 61 mV dec-1, high drain current (IDS) ON/OFF ratio of 1.5 × 109, and negligible transfer characteristic hysteresis. We also experimentally demonstrated robustness of these devices with current-voltage (I-V) characteristics measured at temperatures up to 400 °C.
ABSTRACT
Tellurium (Te) is a narrow bandgap semiconductor with a unique chiral crystal structure. The topological nature of electrons in the Te conduction band can be studied by realizing n-type doping using atomic layer deposition (ALD) technique on two-dimensional (2D) Te film. In this work, we fabricated and measured the double-gated n-type Te Hall-bar devices, which can operate as two separate or coupled electron layers controlled by the top gate and back gate. Profound Shubnikov-de Haas (SdH) oscillations are observed in both top and bottom electron layers. Landau level hybridization between two layers, compound and charge-transferable bilayer quantum Hall states at filling factor ν = 4, 6, and 8, are analyzed. Our work opens the door for the study of Weyl physics in coupled bilayer systems of 2D materials.
ABSTRACT
Two-dimensional (2D) trigonal selenium (t-Se) has become a new member in 2D semiconducting nanomaterial families. It is composed of well-aligned one-dimensional Se atomic chains bonded via van der Waals (vdW) interaction. The contribution of this unique anisotropic nanostructure to its mechanical properties has not been explored. Here, for the first time, we combine experimental and theoretical analyses to study the anisotropic mechanical properties of individual 2D t-Se nanosheets. It was found that its fracture strength and Young's modulus parallel to the atomic chain direction are much higher than along the transverse direction, which was attributed to the weak vdW interaction between Se atomic chains as compared to the covalent bonding within individual chains. Additionally, two distinctive fracture modes along two orthogonal loading directions were identified. This work provides important insights into the understanding of anisotropic mechanical behaviors of 2D semiconducting t-Se and opens new possibilities for future applications.
Subject(s)
Nanostructures , Selenium , Anisotropy , Elastic Modulus , HumansABSTRACT
A ferroelectric semiconductor junction is a promising two-terminal ferroelectric device for nonvolatile memory and neuromorphic computing applications. In this work, we propose and report the experimental demonstration of asymmetric metal/α-In2Se3/Si crossbar ferroelectric semiconductor junctions (c-FSJs). The depletion in doped Si is used to enhance the modulation of the effective Schottky barrier height through the ferroelectric polarization. A high-performance α-In2Se3 c-FSJ is achieved with a high on/off ratio > 104 at room temperature, on/off ratio > 103 at an elevated temperature of 140 °C, retention > 104 s, and endurance > 106 cycles. The on/off ratio of the α-In2Se3 asymmetric FSJs can be further enhanced to >108 by introducing a metal/α-In2Se3/insulator/metal structure.
ABSTRACT
In this work, we demonstrate enhancement-mode field-effect transistors by an atomic-layer-deposited (ALD) amorphous In2O3 channel with thickness down to 0.7 nm. Thickness is found to be critical on the materials and electron transport of In2O3. Controllable thickness of In2O3 at atomic scale enables the design of sufficient 2D carrier density in the In2O3 channel integrated with the conventional dielectric. The threshold voltage and channel carrier density are found to be considerably tuned by channel thickness. Such a phenomenon is understood by the trap neutral level (TNL) model, where the Fermi-level tends to align deeply inside the conduction band of In2O3 and can be modulated to the bandgap in atomic layer thin In2O3 due to the quantum confinement effect, which is confirmed by density function theory (DFT) calculation. The demonstration of enhancement-mode amorphous In2O3 transistors suggests In2O3 is a competitive channel material for back-end-of-line (BEOL) compatible transistors and monolithic 3D integration applications.
ABSTRACT
In this work, we demonstrate high-performance indium-tin-oxide (ITO) transistors with a channel thickness down to 1 nm and ferroelectric Hf0.5Zr0.5O2 as gate dielectric. An on-current of 0.243 A/mm is achieved on submicron gate-length ITO transistors with a channel thickness of 1 nm, while it increases to as high as 1.06 A/mm when the channel thickness increases to 2 nm. A raised source/drain structure with a thickness of 10 nm is employed, contributing to a low contact resistance of 0.15 Ω·mm and a low contact resistivity of 1.1 × 10-7 Ω·cm2. The ITO transistor with a recessed channel and ferroelectric gating demonstrates several advantages over 2D semiconductor transistors and other thin-film transistors, including large-area wafer-size nanometer thin-film formation, low contact resistance and contact resistivity, an atomic thin channel being immune to short channel effects, large gate modulation of high carrier density by ferroelectric gating, high-quality gate dielectric and passivation formation, and a large bandgap for the low-power back-end-of-line complementary metal-oxide-semiconductor application.
ABSTRACT
Hardware implementation of an artificial neural network requires neuromorphic devices to process information with low energy consumption and high heterogeneity. Here we demonstrate an electrolyte-gated synaptic transistor (EGT) based on a trigonal selenium (t-Se) nanosheet. Due to the intrinsic low conductivity of the Se channel, the t-Se synaptic transistor exhibits ultralow energy consumption, less than 0.1 pJ per spike. More importantly, the intrinsic low symmetry of t-Se offers a strong anisotropy along its c- and a-axis in electrical conductance with a ratio of up to 8.6. The multiterminal EGT device exhibits an anisotropic response of filtering behavior to the same external stimulus, which enables it to mimic the heterogeneous signal transmission process of the axon-multisynapse biostructure in the human brain. The proof-of-concept device in this work represents an important step to develop neuromorphic electronics for processing complex signals.
Subject(s)
Selenium , Transistors, Electronic , Anisotropy , Electrolytes , Humans , Neural Networks, ComputerABSTRACT
Trigonal tellurium (Te) is a chiral semiconductor that lacks both mirror and inversion symmetries, resulting in complex band structures with Weyl crossings and unique spin textures. Detailed time-resolved polarized reflectance spectroscopy is used to investigate its band structure and carrier dynamics. The polarized transient spectra reveal optical transitions between the uppermost spin-split H4 and H5 and the degenerate H6 valence bands (VB) and the lowest degenerate H6 conduction band (CB) as well as a higher energy transition at the L-point. Surprisingly, the degeneracy of the H6 CB (a proposed Weyl node) is lifted and the spin-split VB gap is reduced upon photoexcitation before relaxing to equilibrium as the carriers decay. Using ab initio density functional theory (DFT) calculations, we conclude that the dynamic band structure is caused by a photoinduced shear strain in the Te film that breaks the screw symmetry of the crystal. The band-edge anisotropy is also reflected in the hot carrier decay rate, which is a factor of two slower along the c-axis than perpendicular to it. The majority of photoexcited carriers near the band-edge are seen to recombine within 30 ps while higher lying transitions observed near 1.2 eV appear to have substantially longer lifetimes, potentially due to contributions of intervalley processes in the recombination rate. These new findings shed light on the strong correlation between photoinduced carriers and electronic structure in anisotropic crystals, which opens a potential pathway for designing novel Te-based devices that take advantage of the topological structures as well as strong spin-related properties.
ABSTRACT
Dirac and Weyl nodal materials can host low-energy relativistic quasiparticles. Under strong magnetic fields, the topological properties of Dirac/Weyl materials can directly be observed through quantum Hall states. However, most Dirac/Weyl nodes generically exist in semimetals without exploitable band gaps due to their accidental band-crossing origin. Here, we report the first experimental observation of Weyl fermions in a semiconductor. Tellurene, the two-dimensional form of tellurium, possesses a chiral crystal structure which induces unconventional Weyl nodes with a hedgehog-like radial spin texture near the conduction band edge. We synthesize high-quality n-type tellurene by a hydrothermal method with subsequent dielectric doping and detect a topologically non-trivial π Berry phase in quantum Hall sequences. Our work expands the spectrum of Weyl matter into semiconductors and offers a new platform to design novel quantum devices by marrying the advantages of topological materials to versatile semiconductors.
ABSTRACT
Herein, we present a solar-blind ultraviolet photodetector realized using atomic layer-deposited p-type cuprous oxide (Cu2O) underneath a mechanically exfoliated n-type ß-gallium oxide (ß-Ga2O3) nanomembrane. The atomic layer deposition process of the Cu2O film applies bis(N,N'-di-secbutylacetamidinato)dicopper(I) [Cu(5Bu-Me-amd)]2 as a novel Cu precursor and water vapor as an oxidant. The exfoliated ß-Ga2O3 nanomembrane was transferred to the top of the Cu2O layer surface to realize a unique oxide pn heterojunction, which is not easy to realize by conventional oxide epitaxy techniques. The current-voltage (I-V) characteristics of the fabricated pn heterojunction diode show the typical rectifying behavior. The fabricated Cu2O/ß-Ga2O3 photodetector achieves sensitive detection of current at the picoampere scale in the reverse mode. This work provides a new approach to integrate all oxide heterojunctions using membrane transfer and bonding techniques, which goes beyond the limitation of conventional heteroepitaxy.