ABSTRACT
Practical applications of photocatalysis in algae removal often involve the use of photoreactors, which can be of many different configurations. In this study, a fluidized bed photoreactor (FBPR) with an external magnetic field was designed and constructed to achieve algae inactivation continuously and stably. Magnetic photocatalyst ZnFe2O4/Ag3PO4/g-C3N4 attached to Fe3O4 aggregate, was dispersed and fixed at the bottom of the reactor to form a flower-like structure, which can not only increase the effective irradiation area of the photocatalyst, but also enhances mass transfer by inducing flow disturbance. Under the optimal operating conditions, i.e., 0.04 m/s flow rate, 200 mT magnetic field strength, and 0.025 g photocatalyst loading, the photoreactor can effectively remove algae cells within 6 h. During the continuous operation experiment, the quality of the magnetic photocatalyst and aggregate did not decrease significantly, and there was still a 90% removal efficiency after 18 h of continuous operation. Furthermore, in the experiment where humic acid was added to simulate actual water environment, certain advantages can still be observed with the FBPR. As a continuous reactor using a magnetic photocatalyst, the FBPR has the characteristics of high availability, low cost, and low energy consumption.
Subject(s)
Humic Substances , Magnetic Fields , CatalysisABSTRACT
Water eutrophication leads to increasingly serious harmful algal blooms (HABs), which poses tremendous threats on aquatic environment and human health. In this work, a novel magnetically separable ZnFe2O4/Ag3PO4/g-C3N4 (ZFO/AP/CN) photocatalyst with double Z-scheme was constructed for Microcystis aeruginosa (M. aeruginosa) inactivation and Microcystin-LR (MC-LR) degradation under visible light. The photocatalyst was characterized by XRD, SEM, EDS, TEM, XPS, FTIR, UV-vis, PL, and VSM. Approximately 96.33% of chlorophyll a was degraded by ZFO/AP/CN (100 mg/L) after 3 h of visible light irradiation. During the photocatalytic process, the malondialdehyde (MDA) of M. aeruginosa increased, the activities of superoxide dismutase (SOD) and catalase (CAT) increased initially and decreased afterwards. Furthermore, the photocatalytic removal efficiency of M. aeruginosa (OD680 ≈0.732) and MC-LR (0.2 mg/L) reached 94.31% and 76.92%, respectively, in the simultaneous removal of algae and algal toxin experiment. Reactive species scavenging experiments demonstrated that·O2- and·OH played key roles in inactivating M. aeruginosa and degrading MC-LR. The excellent recoverability and stability of ZFO/AP/CN were proved by cycling photocatalytic experiment which using magnetic recovery method. In summary, the synthesized magnetically separable ZFO/AP/CN photocatalyst has remarkable photocatalytic activity under visible light and shows promising potential for practical application of alleviating HABs.
Subject(s)
Microcystis , Catalysis , Chlorophyll A , Harmful Algal Bloom , LightABSTRACT
In this work, a novel Ag/AgCl@g-C3N4@UIO-66(NH2) heterojunction was constructed for photocatalytic inactivation of Microcystis aeruginosa (M. aeruginosa) under visible light. The photocatalyst was synthesized by a facile method and characterized by XRD, SEM, TEM, BET, XPS, FT-IR, UV-vis DRS, PL and EIS. The nanocomposite can not only provide lots of active sites, but also improve capacities to utilize visible-light energy and effectively transfer charge carriers, thus enhancing removal efficiencies of cyanobacteria (99.9% chlorophyll a was degraded within 180 min). Various factors in photodegradation of chlorophyll a were studied. Besides, changes on cellular morphologies, membrane permeability, physiological activities of M. aeruginosa during photocatalysis were investigated. Moreover, the cycle test indicated that Ag/AgCl@g-C3N4@UIO-66(NH2) exhibits excellent reusability and photocatalytic stability. Finally, a possible mechanism of M. aeruginosa inactivation was proposed. In a word, Ag/AgCl@g-C3N4@UIO-66(NH2) can efficiently inactivate cyanobacteria under visible light, thus providing useful references for further removal of harmful algae in real water bodies.
Subject(s)
Microcystis , Nanocomposites , Chlorophyll A , Light , Silver , Spectroscopy, Fourier Transform InfraredABSTRACT
The frequent harmful algae blooms (HABs) in eutrophic waters pose serious threats to the water environment and health of human beings and animals. In this study, a new type of photocatalytic coating was prepared by loading Ag2CO3-N:GO (AGON) on the polyurethane sponge modified by silica sol via a dip coating method for the photocatalytic inactivation of Microcystis aeruginosa (M. aeruginosa) and degradation of Microcystin-LR (MC-LR). The factors including photocatalyst loading dosage, natural organic matter (NOM), and alkalinity were studied. The effects on the physiological characteristics of M. aeruginosa and reactive oxygen species (ROS) were also investigated to reveal the photocatalytic inactivation mechanisms. The results showed that the AGON coating-4 (the initial concentration of AGON suspension used for loading is 4 g/L) exhibited the optimum photocatalytic performance under visible light, which can completely remove chlorophyll a after 5 h of irradiation. And the NOM and alkalinity in water have relatively negative effects on the photocatalytic inactivation of algae. The prepared AGON coating also exhibited excellent photocatalytic performance in the degradation of MC-LR under visible light. It only needed 20, 60 and 120 min to completely degrade 0.1, 0.3 and 0.5 mg/L MC-LR, respectively. However, the mixed systems of algae and MC-LR required a longer time to achieve photocatalytic degradation. The O2- were the predominant reactive oxygen species, causing the damage of cell membranes and walls and the leakage of cellular content, which eventually led to the irreversible damage to algal cells. What's more, the coating can be reused several times due to its good cyclability and stability. Therefore, the AGON coating has promising prospects for the treatment of algal blooms in eutrophic waters.