ABSTRACT
Herein we designed, optimized, and characterized the Metformin Hydrochloride Transethosomes (MTF-TES) and incorporate them into Chitosan gel to develop Metformin Hydrochloride loaded Transethosomal gel (MTF-TES gel) that provides a sustained release, improved transdermal flux and improved antidiabetic response of MTF. Design Expert® software (Ver. 12, Stat-Ease, USA) was applied for the statistical optimization of MTF-TES. The formulation with Mean Particle Size Distribution (MPSD) of 165.4 ± 2.3 nm, Zeta Potential (ZP) of -21.2 ± 1.9 mV, Polydispersity Index (PDI) of 0.169 ± 0.033, and MTF percent Entrapment Efficiency (%EE) of 89.76 ± 4.12 was considered to be optimized. To check the chemical incompatibility among the MTF and other formulation components, Fourier Transform Infrared (FTIR) spectroscopy was performed and demonstrated with no chemical interaction. Surface morphology, uniformity, and segregation were evaluated through Transmission Electron Microscopy (TEM). It was revealed that the nanoparticles were spherical and round in form with intact borders. The fabricated MTF-TES has shown sustained release followed by a more pronounced effect in MTF-TES gel as compared to the plain MTF solution (MTFS) at a pH of 7.4. The MTF-TES has shown enhanced permeation followed by MTF-TES gel as compared to the MTFS at a pH of 7.4. In vivo antidiabetic assay was performed and results have shown improved antidiabetic potential of the MTF-TES gel, in contrast to MTF-gel. Conclusively, MTF-TES is a promising anti-diabetic candidate for transdermal drug delivery that can provide sustained MTF release and enhanced antidiabetic effect.
Subject(s)
Diabetes Mellitus , Animals , Mice , Rats , Metformin/chemistry , Metformin/pharmacology , Metformin/therapeutic use , Hypoglycemic Agents/chemistry , Hypoglycemic Agents/pharmacology , Hypoglycemic Agents/therapeutic use , Gels , Spectroscopy, Fourier Transform Infrared , Software , Diabetes Mellitus/drug therapy , Delayed-Action PreparationsABSTRACT
AIM: This work aims to formulate topical hybrid gel containing chitosan-coated moxifloxacin (MXF) HCl nanoparticles (NPs) with enhanced antibacterial and healing activity. METHODS: MXF HCl NPs prepared by the ionic gelation method were loaded onto a hybrid chitosan carbomer gel. Size analysis of the prepared NPs was performed using SEM and Zeta-sizer. Further characterisation was done using Fourier transforms infra-red spectroscopy (FTIR), X-ray diffraction (XRD), and Thermogravimetric analysis (TGA). Prepared gel was evaluated for its in vitro drug release, biocompatibility, antibacterial activity, and stability studies under storage conditions. In-vivo wound healing was measured by observing percentage reduction in wound. RESULTS: NPs have 359 ± 79 nm mean particle size, 31.01 mV zeta potential with 0.008 polydispersity index (PD1), 63.5% drug entrapment and 83 ± 3.5% drug release at pH 5.5. Hybrid chitosan carbomer gel showed good biocompatibility, antibacterial, in-vivo wound healing properties and stable properties. CONCLUSIONS: NP-loaded hybrid gel can be an effective treatment for acute and challenged topical wounds.
Subject(s)
Chitosan , Nanoparticles , Anti-Bacterial Agents/pharmacology , Drug Carriers , Drug Liberation , Moxifloxacin , Particle Size , Wound HealingABSTRACT
The markedly low oral bioavailability of domperidone (anti-emetic drug) is associated with rapid first-pass metabolism in the intestine and liver. To counteract such affects, there is a need to devise a strategy to enhance absorption and subsequently bioavailability. Thus, the current study was aimed at synthesizing phytosomes consisting of phosphatidylcholine and piperine (a P-glycoprotein inhibitor). Phytosomes were prepared by salting-out method. The developed phytosomes were extensively characterized for size, zeta potential, polydispersity index, entrapment efficiency (EE %), infra-red spectroscopy, X-ray diffraction, in vitro drug release, ex vivo permeation, in vivo pharmacokinetic and toxicity. The engineered formulations of phytosomes with piperine exhibited a significant improvement in oral bioavailability of domperidone (79.5%) in comparison with the pure drug suspension under the same conditions. Pharmacokinetic parameters such as maximal plasma concentration (Cmax) and the plasma concentration (estimated from area under the curve; AUC) of domperidone have been greatly increased relative to drug alone. The improved drug absorption was attributed to inhibition of P-glycoprotein transporter. The findings of current research work suggest that the optimized phytosomes based drug delivery containing phytochemicals as bioenhancers have the potential to improve bioavailability of poorly bioavailable drugs that are substrate to P-glycoprotein.
Subject(s)
Domperidone , Liposomes , ATP Binding Cassette Transporter, Subfamily B, Member 1 , Administration, Oral , Alkaloids , Benzodioxoles , Biological Availability , Domperidone/pharmacokinetics , Particle Size , Piperidines , Polyunsaturated AlkamidesABSTRACT
This study was aimed at synthesizing liposomes for the topical delivery of chlorpheneramine maleate using three-level factorial design. Each experiment consisted of a varying proportion of cholesterol, lecithin and a permeation enhancer mixture of Tween80 and polyethylene glycol (PEG1000), and resultant liposomes were extensively characterized. The drug release study was conducted at 6.0 pH, 37±1ºC temperature and 100 rpm rotation speed utilizing a cellophane membrane pouch in a USP type II dissolution apparatus. Among formulations, L5 was considered as the optimal formulation because of high drug loading (99.05%), 87.71% drug release within 4 hours, high drug loading and the optimized formulation was found to be stable during stability testing. This high drug loading and release was achieved at low level of cholesterol and lecithin (0.1: 0.3g) and high level of permeation enhancer mixture (0.2g) as revealed by the surface plots. The drug release from the optimized formulation followed Fickian diffusion as revealed by Korsmeyers-Peppas kinetic model. In summary, combination of PEG1000 and Tween80 with lecithin and cholesterol can be successfully used to develop liposomes that efficiently incorporated chlorpheneramine. This formulation therefore has the potential to be used as a topical anti-allergic product.
Subject(s)
Chlorpheniramine/chemistry , Drug Compounding/methods , Histamine Antagonists/chemistry , Liposomes/chemistry , Administration, Topical , Chlorpheniramine/administration & dosage , Drug Liberation , Histamine Antagonists/administration & dosage , Molecular StructureABSTRACT
BACKGROUND/OBJECTIVE: Periodontitis is a widely spread oral infection and various antibiotics are utilized for its treatment, but high oral doses and development of antibiotic resistance limit their use. This study was aimed at development of natural polymer-based mucoadhesive bilayer films loaded with moxifloxacin hydrochloride (Mox) and clove essential oil (CEO) to potentially combat bacterial infection associated with periodontitis. METHODS: Films were synthesized by double solvent casting technique having an antibiotic in the gellan gum-based primary layer with clove oil in a hydroxyethyl cellulose-based secondary layer. RESULTS: Prepared films were transparent, flexible, and showed high antibacterial response against both gram-positive and gram-negative bacteria. The films showed excellent pharmaceutical attributes in terms of drug content, folding endurance, swelling index, and mucoadhesive strength. Solid state characterization of formulation showed successful incorporation of drug and oil in separate layers of hydrogel structure. An in-vitro release study showed an initial burst release of drug followed by sustained release for up to 48 hours. CONCLUSION: The prepared mucoadhesive bilayer buccal films could be used as a potential therapeutic option for the management of periodontitis.
Subject(s)
Anti-Bacterial Agents/pharmacology , Clove Oil/pharmacology , Moxifloxacin/pharmacology , Polysaccharides, Bacterial/chemistry , Adhesiveness , Administration, Buccal , Anti-Bacterial Agents/administration & dosage , Anti-Bacterial Agents/chemistry , Chemistry, Pharmaceutical/methods , Clove Oil/administration & dosage , Delayed-Action Preparations , Drug Liberation , Gram-Negative Bacteria/drug effects , Gram-Positive Bacteria/drug effects , Moxifloxacin/administration & dosage , Moxifloxacin/chemistry , Oils, Volatile/administration & dosage , Oils, Volatile/pharmacology , Periodontitis/drug therapy , Periodontitis/microbiologyABSTRACT
Development of dimenhydrinate (DMN) emulgel formulation has been described in this work with enhanced permeation for transdermal delivery of DMN for effective management of motion sickness. Various DMN emulgel formulations were prepared using central composite design in response surface methodology. Propylene glycol and olive oil were used in varying ratios as permeation enhancers along-with carbopol-934 as gelling agent. Prepared formulations were evaluated by physico-chemical properties, stability and Fourier transform infrared spectroscopy (FTIR) studies. In-vitro drug release was studied using cellophane membrane. Formulation F2 showed maximum drug permeation following diffusion-based release mechanism and was used in further studies. Rat skin was used in Franz cell for ex-vivo studies to determine various permeation kinetic parameters. FTIR studies provided no evidence of chemical interaction between DMN and polymers used, whereas molecular docking revealed formation of a stable complex in the presence of aqueous environment with stable intermolecular binding and the complex was well hydrated. No evidence of skin irritation was observed in human volunteers following application of the optimized formulation. Histopathology data of the rat skin showed a decreased proliferation of the lymphocytes whereas monocytes were induced. In conclusion, combination of propylene glycol and olive oil was successfully employed for delivery of DMN through transdermal route with good permeability and prolonged release time that can be highly beneficial in treating motion sickness in unusual circumstances.
Subject(s)
Antiemetics/administration & dosage , Dimenhydrinate/administration & dosage , Emulsions , Gels , Olive Oil , Propylene Glycol , Skin/metabolism , Administration, Cutaneous , Animals , Antiemetics/pharmacokinetics , Dimenhydrinate/pharmacokinetics , Drug Delivery Systems , Molecular Docking Simulation , Motion Sickness/drug therapy , Rats , Skin Absorption , Spectroscopy, Fourier Transform InfraredABSTRACT
Overactive bladder syndrome (OAB) is characterised by urgency symptoms, with or without urgency incontinence, usually with frequency and nocturia and severely affects the quality of life. This systematic review evaluates the various drug delivery strategies used in practice to manage OAB. Advanced drug delivery strategies alongside traditional strategies were comprehensively analysed and comparatively evaluated. The present review was conducted according to the preferred reporting items for systematic reviews and meta-analyses guidelines. A total of 24 studies reporting the development of novel formulations for the treatment of OAB were considered eligible and were further categorised according to the route of drug administration. The review found that various drug delivery routes (transdermal, intravesicular, oral, vaginal and intramuscular) are used for the administration of drugs for managing OAB, however, the outcomes illustrated the marked potential of transdermal drug delivery route. The findings of the current review are expected to be helpful for pharmaceutical scientists to better comprehend the existing literature and challenges and is anticipated to provide a basis for designing and fabricating novel drug delivery systems to manage OAB.
ABSTRACT
BACKGROUND: In recent era, pH sensitive polymeric carriers that combines the materials engineering and medicine is gaining researcher's attention as they maximizes drug concentration at site of absorption and reduces side effects for e.g. orally administered cetirizine HCl (CTZ HCl) upsets the stomach and furthermore shows high intestinal absorption. Thus, development of pH sensitive hydrogels with sufficient mechanical strength will be good candidate to address this issue. METHODS: Here, we developed pH sensitive itaconic acid-g-poly(acrylamide)/sterculia gum (IA-g-poly(AM)/sterculia gum) semi-interpenetrating network (semi-IPN) by free radical polymerization technique for intestinal delivery of CTZ HCL. RESULTS: Optimized formulation (I5) with 6% w/w IA showed negligible swelling at pH 1.2, and maximum swelling at pH 7.4. Solid state characterization of optimized formulation showed successful development of semi-IPN structure and incorporation of drug without any noticeable drug-carrier interaction. In vitro release study showed biphasic pH dependent release of CTZ HCl, where initial burst release was observed at acidic pH followed by sustained release at basic pH. Acute oral toxicity and histopathological studies confirmed the non-toxic nature of IA-g-poly(AM)/sterculia gum. CONCLUSION: Conclusively, developed biocompatible semi-IPN hydrogels with sufficient pH sensitivity and mechanical strength could serve as a potential carrier for intestinal delivery of CTZ HCL to maximize its absorption and reduce side effects.
Subject(s)
Acrylic Resins , Drug Carriers , Hydrogels , Plant Gums , Sterculia , Succinates , Acrylic Resins/chemistry , Acrylic Resins/toxicity , Animals , Drug Carriers/chemistry , Drug Carriers/toxicity , Drug Compounding , Drug Liberation , Hydrogels/chemistry , Hydrogels/toxicity , Hydrogen-Ion Concentration , Plant Gums/chemistry , Plant Gums/toxicity , Polymerization , Rabbits , Succinates/chemistry , Succinates/toxicity , Toxicity Tests, AcuteABSTRACT
The study was aimed to improve the aqueous solubility of atorvastatin (AT) and ameliorate permeability of metformin (MT) in a combination formulation, improving their oral bioavailability. Several AT-MT loaded polyvinylpyrrolidone (PVP) and hyaluronic acid (HA) based nanoparticles were prepared through electrospraying method (ES-NPs), and tested for physicochemical, in vitro, and in vivo parameters. Among the trialed formulations, a sample consisting of AT, MT, PVP, and HA at the weight ratio of 1/6.25/3.75/15 furnished the most satisfying solubility and release rate results. It enhanced approximately 10.3-fold and 3.6-fold solubility of AT as compared with AT powder and marketed product (Lipilow) in phosphate buffer pH = 6.8, respectively. Whereas, permeation of MT was 1.60-fold and 1.47-fold improved as compared with MT powder and marketed product (Glucophage), respectively. As compared with Lipilow, AUC (0-∞) and Cmax of AT with ES-NPs in rats were improved to 3.6-fold and 3.2-fold, respectively. Similarly, as compared with Glucophage, AUC (0-∞) and Cmax of MT were improved to 2.3-fold and 1.8-fold, respectively. Thus, ES-NPs significantly enhanced the solubility of AT (a BCS class II drug) and permeability of MT (a BCS class III drug) and might be a promising drug delivery system for co-delivery of these drugs.
Subject(s)
Biological Products , Metformin , Nanoparticles , Administration, Oral , Animals , Atorvastatin , Biological Availability , Hyaluronic Acid , Povidone , Rats , SolubilityABSTRACT
BACKGROUND: Onychomycosis is by far the most common finger or toe nail fungal infectious disease caused by dermatophytes, non-dermatophytic molds or yeast. It accounts for 50% of the total nail disorders, and affects patients physically, socially, and psychologically and can seriously influence their quality of life. OBJECTIVES: Oral antifungals are routinely used to treat the nail fungal disease; however oral therapy is associated with severe side effects and longer treatment times. In recent years, drug delivery directly into the nail or nail bed has gained attention and various topical products have been tested that can cure the disease when applied topically or transungually. Nevertheless, drug penetration into and through the nail is not straightforward and requires chemicals to improve its permeability or by applying physical stress to promote drug penetration into and through the nail. This lucid review presents an overview of various causes of onychomycosis, current therapeutic approaches, and efforts aimed at increasing the permeability of nails through various strategies such as chemical, physical and mechanical methods for permeation enhancement. CONCLUSION: Various strategies have been proposed for the treatment of onychomycosis, however, much research into a more precise and effective therapy is still required.
Subject(s)
Antifungal Agents/administration & dosage , Drug Delivery Systems , Onychomycosis/drug therapy , Administration, Topical , Antifungal Agents/pharmacokinetics , Chemistry, Pharmaceutical/methods , Foot Dermatoses/drug therapy , Foot Dermatoses/microbiology , Hand Dermatoses/drug therapy , Hand Dermatoses/microbiology , Humans , Nails/metabolism , Nails/microbiology , PermeabilityABSTRACT
Herein, we report co-encapsulation of ofloxacin with tea tree or lavender oil in gellan gum based hydrogel films by solvent casting ionotropic gelation method as wound dressing. Prepared films were transparent, flexible, and displayed antioxidant activity with superior antibacterial response against common inhabitants of wound i.e. gram positive and negative bacteria. Solid-state characterization of optimized formulation (OL3 and OT3) revealed successful incorporation of drug and oils in hydrogel structure without any noticeable interaction. In vitro release studies showed an initial burst release but remaining portion released in controlled manner over 48 h from the films and furthermore, presence of oils did not affected the ofloxacin release. Optimized formulation containing ofloxacin and 25% w/w lavender/tea tree oil showed 98% wound contraction in rats after ten days of treatment. Histological images displayed completely healed epidermis. Taken together, our prepared hydrogel films demonstrated favorable features with appreciable antibacterial, wound healing activity and could be useful for the treatment of full thickness wounds.
Subject(s)
Methylgalactosides/chemistry , Ofloxacin/pharmacology , Oils, Volatile/pharmacology , Plant Oils/pharmacology , Polysaccharides, Bacterial/chemistry , Tea Tree Oil/pharmacology , Wound Healing/drug effects , Animals , Antioxidants/pharmacology , Calorimetry, Differential Scanning , Drug Liberation , Escherichia coli/drug effects , Kinetics , Lavandula , Microbial Sensitivity Tests , Rats , Spectroscopy, Fourier Transform Infrared , Staphylococcus aureus/drug effects , Thermogravimetry , X-Ray DiffractionABSTRACT
BACKGROUND: Piroxicam exhibits low oral bioavailability, due to its meager solubility in water. The intent of this study was to ameliorate the bioavailability of the drug by employing a solubility-enhancing encapsulation technique. METHODS: Seven samples were formulated with piroxicam and gelatin using both solvent evaporation and electrospraying together. Evaluation of solubility and release rate in water and assessment of bioavailability in rats were carried out in comparison with piroxicam plain drug powder (PPDP). Other in vitro explorations were accomplished using powder X-ray diffraction analysis, differential scanning calorimetry, thermogravimetric analysis, scanning electron microscopy, and Fourier-transform infrared spectroscopy. RESULTS: All piroxicam-loaded gelatinnanocontainers (PLGNs) enhanced solubility and release of the payload in water. In particular, a PLGN formulation consisting of piroxicam and gelatin at a 1:8 (w:w) ratio presented about 600-fold the drug solubility of that shown by PPDP. Moreover, 85.12%±10.96% of the payload was released from this formulation in 10 minutes which was significantly higher than that dissolved from PPDP in 10 minutes (11.81%±5.34%). Drug content, drug loading, and encapsulation efficiency of this formulation were 93.41%±0.56%, 10.45%±0.06%, and 66.74%±6.87%, respectively. The drug loaded in PLGNs existed in the amorphous state, as confirmed by X-ray diffraction and differential scanning-calorimetry analyses, and was more stable when analyzed by thermogravimetric analysis. Moreover, Fourier-transform infrared spectroscopy analysis suggested nonexistence of any piroxicam-gelatin interaction in the formulation. In the scanning electron-microscopy image, PLGNs appeared as round, smooth particles, with particle size of <1,000 nm. Amelioration in bioavailability of piroxicam with the aforementioned PLGN formulation was fourfold that of PPDP. CONCLUSION: The PLGN formulation fabricated with piroxicam and gelatin at 1:8 (w:w) might be a promising system for enhanced biopharmaceutical performance of the drug.
Subject(s)
Drug Carriers/chemistry , Electricity , Gelatin/chemistry , Nanostructures/chemistry , Piroxicam/chemistry , Animals , Biological Availability , Male , Particle Size , Piroxicam/pharmacokinetics , Piroxicam/pharmacology , Rats , SolubilityABSTRACT
Rheumatoid arthritis (RA) is an autoimmune disease associated with severe joint pain. Herein, we report lornoxicam loaded cellulosic microsponge gel formulation with sustained anti-inflammatory effects that are required to manage arthritic pain. The microsponges were formulated using quasi emulsion-solvent diffusion method employing four different surfactant systems, namely polyvinyl alcohol (PVA), Tween80, Gelucire 48/16 and Gelucire 50/13. All the lornoxicam loaded microsponge formulations were extensively characterized with a variety of analytical tools. The optimized microsponge formulation was then converted into gel formulation. The lornoxicam loaded microsponge gel formulation had adequate viscosity and sufficient pharmaceutical properties as confirmed by the texture analysis and the drug release followed Super case II transport. It is noteworthy that we described the preparation of a new cellulosic polymers based microsponge system for delivery of lornoxicam to provide quick as well as lasting (sustained) anti-inflammatory effects in rats using carrageenan induced rat paw edema model. We were able to demonstrate a 72% reduction in inflammation within 4 h using the optimize transdermal gel formulation utilizing Transcutol P as permeation enhancer and with the aid of skin micro-piercing by microneedles, hence, demonstrating the potential of this microsponge gel formulation in arthritis management.
ABSTRACT
The limited aqueous solubility of many active pharmaceutical ingredients (APIs) is responsible for their poor performance and low drug levels in blood and at target sites. Various approaches have been adopted to tackle this issue. Most recently, mesoporous silica nanoparticles (MSN) have gained attention of pharmaceutical scientists for bio-imaging, bio-sensing, gene delivery, drug solubility enhancement, and controlled and targeted drug release. Here, we have successfully incorporated the poorly water soluble antiviral drug velpatasvir (VLP) in MSN. These spherical particles were 186 nm in diameter with polydispersity index of 0.244. Blank MSN have specific surface area and pore diameter of 602.5 ± 0.7 m2/g and 5.9 nm, respectively, which reduced after successful incorporation of drug. Drug was in amorphous form in synthesized VLP-loaded silica particles (VLP-MSN) with no significant interaction with carrier. Pure VLP showed poor dissolution with progressive increment in pH of dissolution media which could limit its availability in systemic circulation after oral administration. After VLP loading in silica carriers, drug released rapidly over a wide range of pH values, i.e., 1.2 to 6.8, thus indicating an improvement in the solubility profile of VLP. These particles were biocompatible, with an LD50 of 448 µg/mL, and in-vivo pharmacokinetic results demonstrated that VLP-MSN significantly enhanced the bioavailability as compared to pure drug. The above results clearly demonstrate satisfactory in-vitro performance, biocompatibility, non-toxicity and in-vivo bioavailability enhancement with VLP-MSN.
ABSTRACT
BACKGROUND: Bezafibrate is a BCS class II drug as it presents very low solubility in water; therefore, its bioavailability after oral administration is very poor. The aim of this work was to enhance solubility and dissolution rate of bezafibrate in water in order to enhance its oral bioavailability. METHODS: Several formulations were prepared using PVP K30 and Cremophor ELP employing the solvent-evaporation method and the electrospraying technique. Solubility, release rate, bioavailability in male Sprague Dawley rats, and lipid profile attributes in Wistar rats were assessed in comparison with bezafibrate plain powder. Solid-state characterization was carried out using X-ray diffraction (XRD) analysis, differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). RESULTS: All the formulations exerted positive effect towards the desired goal. In particular, the optimized formulation furnished about 14-fold enhanced solubility and 85.48 ± 10.16% drug was released in 10 min as compared with bezafibrate alone (4.06 ± 2.59%). The drug existed in the amorphous state in the prepared sample as confirmed by XRD and DSC, whilst no drug-excipient interactions were observed through FTIR analysis. Moreover, SEM revealed smooth-surfaced spherical particles of the optimized formulation. A 5.5-fold higher oral bioavailability was achieved with the optimized formulation in comparison with bezafibrate plain powder. Also, TG, LDL and TC were decreased, and HDL was increased considerably in HFD-treated rats. CONCLUSION: The optimized formulation consisting of bezafibrate, PVP K30 and cremophor ELP (1/12/1.5, w/w/w) might be a capable drug delivery system for orally administering poorly water-soluble bezafibrate with improved bioavailability and antihyperlipidemic effects.
Subject(s)
Bezafibrate/pharmacology , Drug Delivery Systems/methods , Hypolipidemic Agents/pharmacology , Nanospheres/chemistry , Polymers/chemistry , Administration, Oral , Animals , Bezafibrate/administration & dosage , Bezafibrate/blood , Bezafibrate/pharmacokinetics , Biological Availability , Calorimetry, Differential Scanning , Hydrophobic and Hydrophilic Interactions , Hypolipidemic Agents/administration & dosage , Hypolipidemic Agents/blood , Hypolipidemic Agents/pharmacokinetics , Lipids/chemistry , Male , Nanospheres/ultrastructure , Polyethylene Glycols/chemistry , Povidone/chemistry , Powders , Rats, Sprague-Dawley , Solubility , Spectroscopy, Fourier Transform Infrared , X-Ray DiffractionABSTRACT
The present study describes synthesis of amino-decorated mesoporous silica nanoparticles (MSNs) for sustained delivery and enhanced bioavailability of sofosbuvir. Sofosbuvir is active against hepatitis C virus and pharmaceutically classified as class III drug according to biopharmaceutics classification system (BCS). MSNs were synthesized using modified sol-gel method and the surface was decorated with amino functionalization. Drug loaded MSNs were also grafted with polyvinyl alcohol in order to compare it with the amino-decorated MSNs for sustained drug release. The prepared MSNs were extensively characterized and the optimized formulation was toxicologically and pharmacokinetically evaluated. The functionalized MSNs of 196 nm size entrapped 29.13% sofosbuvir in the pores, which was also confirmed by the decrease in surface area, pore volume and pore size. The drug-loaded amino-decorated MSNs revealed an improved thermal stability as confirmed by thermal analysis. Amino-decorated MSNs exhibited Fickian diffusion controlled sofosbuvir release as compared with non-functionalized and PVA grafted MSNs. Amino-decorated MSNs were deemed safe to use in Sprague-Dawley rats after 14-days exposure as confirmed by the toxicological studies. More interestingly, we achieved a 2-fold higher bioavailability of sofosbuvir in Sprague-Dawley rats in comparison with sofosbuvir alone, and the Tmax was delayed 3-times indicating a sustained release of sofosbuvir.
Subject(s)
Antiviral Agents , Drug Carriers , Nanoparticles , Propylamines , Silanes , Silicon Dioxide , Sofosbuvir , Animals , Antiviral Agents/administration & dosage , Antiviral Agents/chemistry , Antiviral Agents/pharmacokinetics , Antiviral Agents/toxicity , Cell Survival/drug effects , Delayed-Action Preparations/administration & dosage , Delayed-Action Preparations/chemistry , Delayed-Action Preparations/pharmacokinetics , Delayed-Action Preparations/toxicity , Drug Carriers/administration & dosage , Drug Carriers/chemistry , Drug Carriers/pharmacokinetics , Drug Carriers/toxicity , Drug Liberation , Hep G2 Cells , Humans , Male , Nanoparticles/administration & dosage , Nanoparticles/chemistry , Nanoparticles/toxicity , Polyvinyl Alcohol/chemistry , Porosity , Propylamines/administration & dosage , Propylamines/chemistry , Propylamines/pharmacokinetics , Propylamines/toxicity , Rats, Sprague-Dawley , Silanes/administration & dosage , Silanes/chemistry , Silanes/pharmacokinetics , Silanes/toxicity , Silicon Dioxide/administration & dosage , Silicon Dioxide/chemistry , Silicon Dioxide/toxicity , Sofosbuvir/administration & dosage , Sofosbuvir/chemistry , Sofosbuvir/pharmacokinetics , Sofosbuvir/toxicityABSTRACT
This study was aimed at developing orodispersible films of citalopram using combination of natural and semisynthetic polymers for patients with swallowing problem. Okra biopolymer and moringa gum were utilized in combination with hydroxypropyl methylcellulose (HPMC) and pullulan. The disintegration time was less than 30 seconds and the drug content uniformity was 97.89-102.05% for all film formulations. Films formulated with HPMC (K15 and K4M) combination (F1) and combination of okra and HPMC K15 (F2) had superior mechanical properties as compared with F3 (okra and pullulan) and F4 (moringa gum and HPMC). Thermal analysis revealed stable formulations over the studied temperature range and the crystalline citalopram was completely or partially transformed into amorphous form as revealed by the differential thermal analysis, X-ray diffraction and scanning electron microscopy images. In conclusion, okra biopolymer could be used in combination with HPMC for the development of orodispersible films.
Subject(s)
Citalopram/chemical synthesis , Polymers/chemistry , Abelmoschus/chemistry , Administration, Oral , Citalopram/administration & dosage , Humans , Hypromellose Derivatives/chemistry , Selective Serotonin Reuptake Inhibitors/administration & dosage , Selective Serotonin Reuptake Inhibitors/chemical synthesis , Solubility , Tensile Strength , X-Ray DiffractionABSTRACT
The present study describes the synthesis of mesoporous silica nanoparticles using a modified sol-gel method. Various proportions of acetonitrile-water mixtures were utilized so as to optimize the reaction mixture for facile synthesis of mesoporous silica nanoparticles with controlled particle size for the very first time. After carefully adjusting the water and acetonitrile contents i.e. to 1:1 v/v ratio, a more uniform and small sized nanoparticles were achieved. The resultant particles were 140 nm in size having pore size of approximately 5.9 nm and were safe to be used in the cellular system, as confirmed by the in vitro cytotoxicity studies.
Subject(s)
Gels/chemistry , Nanoparticles/chemistry , Silicon Dioxide/chemistry , Drug Delivery Systems/methods , Particle Size , Porosity , Surface Properties , Water/chemistryABSTRACT
A simple, specific, sensitive, robust, accurate and precise reverse-phase high performance liquid chromatographic (RP-HPLC) method was developed and validated for simultaneous determination of sofosbuvir (SOF) and velpatasvir (VLP) in fixed dose combination tablets and plasma. Validation parameters, such as system suitability, accuracy, inter-day and intra-day variances, specificity, linearity, limit of detection (LOD), limit of quantification (LOQ), robustness and stability were assessed following the standards set by the International Conference on Harmonization (ICH). The isocratic elution of SOF and VLP was carried out under ambient conditions using ammonium acetate buffer (pH = 7.0), acetonitrile and methanol (20:40:40, v/v/v) as mobile phase flowing through a Promosil C18 column at a flow rate of 1.0 mL/min. The average retention time of SOF and VLP was 3.72 min and 7.09 min, respectively. The LOD and LOQ of SOF were 0.23µg/mL and 2.48µg/mL, respectively; while those of VLP were 0.70µg/mL and 7.52µg/mL, respectively. The regression coefficient (r2) was 0.998. The relative standard deviation (RSD) was less than 2% for precision. The recovery of both the analytes remained within 100±1%. All other validation parameters complied with ICH guidelines. The analytes remained stable throughout the analytical procedure. Moreover, this method was successfully applied to assess the in vitro dissolution of SOF and VLP loaded fixed dose combination tablets. Same method with same mobile phase was applied on rat plasma and there was no interference.
Subject(s)
Carbamates/chemistry , Chromatography, High Pressure Liquid/methods , Chromatography, Reverse-Phase/methods , Heterocyclic Compounds, 4 or More Rings/chemistry , Plasma/chemistry , Sofosbuvir/chemistry , Tablets/analysis , Animals , Drug Stability , Limit of Detection , Rats , Reproducibility of Results , Sensitivity and Specificity , Tandem Mass SpectrometryABSTRACT
BACKGROUND: Poorly water-soluble drugs do not dissolve well in aqueous-based gastrointestinal fluid; therefore, they are not well absorbed. Thus, employing a suitable solubility enhancing technique is necessary for such a drug. Drug/HPßCD complexation is a promising way to improve solubility and dissolution of a poorly water-soluble drug. Levodropropizine was used as a model drug in this study. OBJECTIVES: The purpose of this research was to enhance the aqueous solubility and dissolution rate of levodropropizine by employing the inclusion complexation technique. MATERIAL AND METHODS: A microparticle formulation was prepared from levodropropizine and hydroxypropyl-ß-cyclodextrin (HPßCD) in a 1:1 molar ratio through the spray-drying technique. The host-guest relationship between levodropropizine and HPßCD was also investigated using the molecular docking computational methodology. The aqueous solubility and dissolution rate of levodropropizine in formulations were assessed and compared with those of the drug alone. X-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR) were applied for the solid-state characterization of the prepared samples. RESULTS: According to the research outcomes, the levodropropizine/HPßCD formulation had enhanced the aqueous solubility (351.12 ±13.26 vs 92.76 ±5.00 mg/mL) and dissolution rate (97.83 ±3.36 vs 3.12 ±1.76% in 10 min) of levodropropizine, compared to the plain drug powder. The levodropropizine/ HPßCD formulation had converted the crystalline drug into its amorphous counterpart. Furthermore, no covalent interaction was found to exist between levodropropizine and HPßCD. The spray-dried particles were discrete. Each particle had a shriveled appearance. CONCLUSIONS: The levodropropizine/HPßCD formulation is, therefore, recommended for the more effective administration of levodropropizine through the oral route.