ABSTRACT
In this work, a three-dimensional bimetallic metal-organic framework (BMOF), BUC-101 (Co/Mn-H6chhc, H6chhc = cis-1,2,3,4,5,6-cyclohexane-hexacarboxylic acid, BUC = Beijing University of Civil Engineering and Architecture) was synthesized by a one-pot solvothermal method and characterized in detail by single crystal X-ray diffraction (SCXRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) element mapping analysis. BUC-101 showed excellent catalytic peroxymonosulfate (PMS) activation performance to degrade rhodamine B (RhB) without energy input. In addition, BUC-101 can maintain good stability and recyclability during the PMS activation processes, in which 99.9% RhB degradation efficiencies could be accomplished in 5 operational runs. The possible PMS activation and RhB degradation mechanisms of the BUC-101/PMS system were proposed and affirmed.
ABSTRACT
Constructing Fe-Cu bimetal catalysts is an efficient strategy to promote Fe(III)/Fe(II) cycle, whereas there is still a long way to go before fully understanding the role of the Cu in the catalysts. Herein, a new Fe-MOF namely BUC-96(Fe) was fabricated from FeSO4·7H2O, 4,4'-bipyridine (bpy) and 2,5-dihydroxyterephthalic acid (H4dhtp) by both hydrothermal reaction and microwave-assisted method. Also, bimetal BUC-96(FeCu-x) were obtained when the CuSO4 was added into the system identical to the synthesis process of BUC-96(Fe). Series BUC-96 MOFs showed good organics elimination performance via Fenton-like process, where 88.1% (k = 0.0672 min-1) of chloroquine phosphate (CQ, 20 mg/L) was decomposed over pristine BUC-96(Fe) within 30 min. Interestingly, nearly 100% CQ was degraded over BUC-96(FeCu-5) as catalyst under the identical conditions within 5 min, whose reaction rate (1.3527 min-1) was 20.1-fold higher than that of BUC-96. Additionally, BUC-96(FeCu-5) exhibited excellent Fenton-like oxidation degradation performance for 10 selected emerging organic pollutants. The reaction mechanism was studied in detail by experiments, and density functional theory (DFT) calculation. The results revealed that the introduced Cu not only accelerated Fe(III)/Fe(II) cycles, hydroxyl radical (·OH) generation, electron transfer, but also lowered H2O2 dissociated energy barrier. This work advanced the bimetal MOFs construction and application in wastewater treatment via Fenton-like process.
ABSTRACT
Coordination polymers (CPs) are organo-inorganic porous materials consisting of metal ions or clusters and organic linkers. These compounds have attracted attention for use in the fluorescence detection of pollutants. Here, two Zn-based mixed-ligand-bearing CPs, [Zn2(DIN)2(HBTC2-)2] (CP-1) and [Zn(DIN)(HBTC2-)]·ACN·H2O (CP-2) (DIN = 1,4-di(imidazole-1-yl)naphthalene, H3BTC = 1,3,5-benzenetricarboxylic acid, and ACN = acetonitrile), were synthesized under solvothermal conditions. CP-1 and CP-2 were characterized by single-crystal X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric analysis, elemental analysis, and powder X-ray diffraction analysis. Solid-state fluorescence analysis revealed an emission peak at 350 nm upon excitation at 225 and 290 nm. Fluorescence sensing tests showed that CP-1 was highly efficient, sensitive, and selective for detecting Cr2O72- at 225 and 290 nm, whereas I- was only detected well at an excitation of 225 nm. CP-1 detected pesticides differently at excitation wavelengths of 225 and 290 nm; the highest quenching rates were for nitenpyram at 225 nm and imidacloprid at 290 nm. The quenching process may occur via the inner filter effect and fluorescence resonance energy transfer.
ABSTRACT
Two organometallic complexes with two and three-dimensional architectures were constructed by using multiple ligands and Zn(ii) ions: [Zn3(BTC)2(DTP)4(H2O)2]·(H2O)4 (Zn-1) (BTC = benzene-1,3,5-tricarboxylic acid and DTP = 3,5-di(1,2,4-triazol-1-yl)pyridine) and [Zn2(NTD)2(DTP)] (Zn-2) (NTD = 1,4-naphthalenedicarboxylic acid). The as-prepared complexes were characterized by single-crystal X-ray diffraction (SCXRD), elemental analysis, powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA) and fluorescence analysis. Fluorescence sensing tests revealed that the two complexes are effective, sensitive and selective toward cationic Fe3+ and anionic MnO4 - and Cr2O7 2-. During the antibiotic sensing process, cefixime (CFX) for Zn-1 and nitrofurantoin (NFT) for Zn-2 exhibited the highest quenching efficiencies. For sensing pesticides, the highest quenching efficiencies were exhibited by imidacloprid (IMI) toward Zn-1 and Zn-2. The fluorescence quenching of the complexes that was induced by antibiotics, pesticides and MnO4 - was attributed to both the inner filter effect (IFE) and the fluorescence resonance energy transfer (FRET) effect.
ABSTRACT
In order to investigate the effect of Mg2Si formation on the microstructure and properties of an Al-Si alloy, the critical point of a hypereutectic Al-17Si-4Cu-Mg alloy was calculated by Pandat software. The calculation results of the equilibrium phase diagram show that the critical point for Mg2Si phase formation for the alloy was obtained when the Mg content was 2.2%. The contents of 0.5 wt.% Mg and 2.5 wt.% Mg were selected as the research object. The content of Mg increased from 0.5 wt.% to 2.5 wt.%, the eutectic Si in the matrix was reduced, and the Chinese character-like Mg2Si phase appeared in the microstructure. In the peak ageing state, in addition to θⳠand Q' phases that were mainly precipitated, there was also needle-like ßâ³ precipitation in the 2.5 wt.% Mg content alloy. Larger precipitates were found in 2.5 wt.% content alloys, mainly due to the promotion of the solid solution having the aggregation and segregation of more solute elements in the matrix. The tensile strength, elongation, and hardness of hypereutectic Al-17Si-4Cu-0.5Mg alloy under peak ageing were 331 MPa, 3.11%, and 152.1 HB, respectively. The tensile strength and the elongation decreased while the hardness increased with the 2.5 wt.% Mg content, which is due to the formation of hard and brittle Mg2Si and Al8FeMg3Si, which has a splitting effect on the matrix.
ABSTRACT
Herein, a metal-free and solvent-free protocol was developed for the C-N coupling of heteroaryl halides and amines, which afforded numerous heteroaryl amines or their hydrochlorides without any external base. Further investigations elucidated that the basicity of amines and specific interactions derived from the X-ray crystallography analysis of 3j'·HCl played pivotal roles in the reactions. Moreover, this protocol was scalable to gram scales and applicable to drug molecules, which demonstrated its practical value for further applications.
Subject(s)
Amines , Metals , SolventsABSTRACT
2-Aminobenzimidazoles are widely present in a number of bioactive molecules. Generally, the preparation of these molecules could be realized by the mono-substitution of 2-halobenzimidazoles with amines. However, rare examples were reported for the di-substituted products and the selectivity of mono- vs. di-substitution was relatively low. Considering the potential values of the di-substituted products, we accomplished the first selective diheteroarylation of amines with 2-halobenzimidazoles. Notably, this Pd-catalyzed transformation was realized under ligand-free conditions. Accordingly, numerous target products were efficiently produced from various aromatic or aliphatic amines and 2-halobenzimidazoles. It was worth noting that two representative products were further confirmed by X-ray crystallography. More significantly, this catalytic process could be applied to the synthesis and discovery of new bioactive compounds, which demonstrated the synthetic usefulness of this newly developed approach.
ABSTRACT
Eight bidentate NHC/Ru complexes, namely [Ru]-1-[Ru]-8, were designed and prepared. In particular, [Ru]-2 displayed extraordinary performance even in open air for the dehydrogenative coupling of alcohols and hydroxides. Notably, an unprecedentedly low catalyst loading of 250 ppm and the highest TON of 32 800 and TOF of 3200 until now were obtained.
ABSTRACT
Structural diversities are presented in four new Co-MOFs containing 1,5-bi(imidazolyl)anthracene and different dibenzobarrelene skeletons based on dicarboxylic acid, in which MOFs 1-3 exhibit 2D networks in a 4-connected node sql topology with the point symbol of {44·62}, while MOF 4 forms a 1D chain structure. It is clearly observed that the 2D-1D structural transformation of 2-4 has been realized by temperature modulated hydrothermal synthesis procedures from 120-160 °C, suggesting the key role of temperature for constructing MOFs. In addition, obvious π-π interactions between anthracene rings can be observed in the architectures of 1-3, which may favorably stabilize their 2D supramolecular networks. More importantly, fluorescence behaviors of 1-4 have been investigated in water among various nitro-aromatic compounds (NACs) and the results show that all samples exhibit high selectivity and fine sensitivity to nitrobenzene (NB) with fluorescence quenching, which is confirmed to be the result of electron transfer from the excited state of ligands to that of NB by density functional theory. Furthermore, MOFs 1-4 have been directly employed as electrocatalysts for the oxygen evolution reaction (OER), in which MOF 4 gives the best activity towards the OER among all as-synthesized samples with an overpotential of 398 mV at a current density of 10 mA cm-2 and a low Tafel slope of 59 mV dec-1.
ABSTRACT
Herein, two Wells -Dawson-type arsenomolybdates, formulated as [Cu(pyr)2]6[As2Mo18O62] (1) and [Ag(pyr)2]6[As2Mo18O62] (2) (pyr = pyrazole), were hydrothermally synthesized and structurally characterized via single-crystal X-ray diffraction, elemental analysis, IR and UV-vis-NIR spectroscopies, XPS, XRD, and TG analysis. The structural analysis indicated that compounds 1 and 2 were isomorphic. They are the first reported 3D honeycomb structures of Wells-Dawson-type arsenomolybdates. The [M(pyr)2] (M = Cu and Ag) connected with [As2Mo18O62]6- polyoxoanions to form the {812·123}{8}3 topological structure. The contributions of organic ligands, pH value, reaction temperature, and transition-metal (TM) to the construction of 3D networks were elucidated. Furthermore, compounds 1 and 2 exhibited fluorescence properties in the solid state at room temperature, highly efficient catalytic ability for the degradation of five organic dyes (MB, RhB, MO, AP, and CR) under UV irradiation, and obvious electrocatalytic activities for the reduction of H2O2. The mechanisms of photocatalysis and electrocatalysis have also been discussed in detail.
ABSTRACT
A 3D 4-coordinated self-catenated metal-organic framework {[Co(bibp)(1,4-chdc)]·2H2O}n (1) (bibp = 4,4'-bis(1-imidazolyl)biphenyl, 1,4-H2chdc = 1,4-cyclohexanedicarboxylic acid) has been synthesized by hydrothermal reaction and its structure has been determined. This framework buries an unprecedented 4-coordinated self-catenated net that can be represented as an array of honeycomb-like units catenated in an inclined mode, with the highest topological density among the 4-coordinated nets that occur in crystal structures. Additionally, the thermogravimetric, photo-catalytic and electrochemical behaviors have been investigated.
ABSTRACT
We report on the synthesis and characterization of second generation ruthenium indenylidene catalysts bearing unsymmetrical N-heterocyclic carbene (NHC) ligands denoted as RuCl2(3-phenyl-1-indenylidene)(1-mesityl-3-R-4,5-dihydroimidazol-2-ylidene)(PCy3), in which R is methyl 8a, octyl 8b or cyclohexyl 8c. The characterization of 8a-c was performed by NMR spectroscopy, elemental analysis, IR, HRMS and single-crystal X-ray diffraction analysis. In addition, the catalytic activity of the obtained initiators was evaluated in various representative metathesis reactions. The results reveal that the complexes 8a-c, bearing an N-alkyl side on the NHC, show a faster catalytic initiation than the reference complex 2. Complex 8a, which performs the best among the investigated indenylidene complexes, exhibits slower initiation but better overall efficiency than its benzylidene analogue 1c, especially in a low catalyst loading.
ABSTRACT
Three metal-organic coordination polymers containing rigid bis(triazole) ligand, namely, [Zn1.5(btb)(nbta)(H2O)]n (1), {[Zn(btb)(3-nph)]·(H2O)}n (2) and [Zn(btb)(4-nph)]n (3) (btb=4,4'-bis(1,2,4-triazolyl-1-yl)-biphenyl, 3-H2nph=3-nitrophthalic acid, H3nbta=5-nitro-1,2,3-benzenetricarboxylic acid, and 4-H2nph=4-nitrophthalic acid) were synthesized under hydrothermal conditions and structurally characterized by X-ray single-crystal diffraction. Complex 1 possesses an interesting 3D coordination framework with a rarely binodal (4,4)-connected frl topological structure. Complexes 2 and 3 exhibit similiar 2D (4,4) grid layers with different point symbol (4(4)·6(4)) in 2 and (4(4)·6(2)) in 3. Furthermore, thermal stability of these compounds has been discussed. Complexes 1-3 exhibit strong solid-state fluorescence at room temperature in solid state.
ABSTRACT
Two new coordination polymers [Cd(bmb)(hmph)]n (1), {[Ag(bmb)]·H2btc}n (2) (bmb=1,4-bis(2-methylbenzimidazol-1-ylmethyl)benzene, H2hmph=homophthalic acid, H3btc=1,3,5-benzenetetracarboxylic acid) were synthesized under hydrothermal conditions and characterized by single-crystal X-ray diffraction methods, IR spectroscopy, TGA, XRPD and elemental analysis. Complex 1 features a 3D threefold interpenetrating dia array with a 4-connected 6(6) topology. Complex 2 shows a 1D helix chain structure connected by L1 ligands, which is finally extended into a rarely 2D 4L2 supramolecular network via C-Hâ¯O hydrogen bond interactions. In addition, the luminescence and catalytic properties of the two complexes for the degradation of the methyl orange azo dye in a Fenton-like process were presented. The degradation efficiency of the methyl orange azo dye for 1 and 2 are 56% and 96%, respectively.
Subject(s)
Coordination Complexes/chemical synthesis , Luminescence , Metals/chemistry , Polymers/chemical synthesis , Azo Compounds/chemistry , Catalysis , Coordination Complexes/chemistry , Crystallography, X-Ray , Hydrogen Bonding , Ligands , Models, Molecular , Molecular Conformation , Polymers/chemistry , Powders , Spectrometry, Fluorescence , Spectrophotometry, Infrared , Thermogravimetry , X-Ray DiffractionABSTRACT
In this article the suitability of FT Raman spectroscopy for monitoring kinetics of ring-closing metathesis promoted by the Grubbs' 1st generation precatalyst was demonstrated for the first time. Reactions at room temperature and under low catalyst loadings were carried out on a series of representative diene substrates. The time evolution of the characteristic Raman stretching vibrations unequivocally described the reaction progress allowing for precise calculation of the substrate conversion and of the yield in the expected cyclic product, based on the corresponding peak heights. The responsive Raman technique demonstrated clean RCM pathways for diethyl diallylmalonate and diallyl ether whereas a minor olefinic side-product was detected in the case of diallyl phthalate. The study provides essential underpinnings for future utilization of Raman spectroscopy, concurrently with NMR or supplementing it, for the evaluation of RCM reactions.