Progress and challenges in nitrous oxide decomposition and valorization.

Nitrous oxide (N2O) decomposition is increasingly acknowledged as a viable strategy for mitigating greenhouse gas emissions and addressing ozone depletion, aligning significantly with the UN's sustainable development goals (SDGs) and carbon neutrality objectives. To enhance efficiency in treatment and explore potential valorization, recent developments have introduced novel N2O reduction catalysts and pathways. Despite these advancements, a comprehensive and comparative review is absent. In this review, we undertake a thorough evaluation of N2O treatment technologies from a holistic perspective. First, we summarize and update the recent progress in thermal decomposition, direct catalytic decomposition (deN2O), and selective catalytic reduction of N2O. The scope extends to the catalytic activity of emerging catalysts, including nanostructured materials and single-atom catalysts. Furthermore, we present a detailed account of the mechanisms and applications of room-temperature techniques characterized by low energy consumption and sustainable merits, including photocatalytic and electrocatalytic N2O reduction. This article also underscores the extensive and effective utilization of N2O resources in chemical synthesis scenarios, providing potential avenues for future resource reuse. This review provides an accessible theoretical foundation and a panoramic vision for practical N2O emission controls.

Protonated amine and pyrene co-functionalized sodium alginate templated on reduced graphene oxide for highly efficient removal of formaldehyde and acid pollutants.

Indoor formaldehyde pollution can cause inestimable harm to human health and even cancers, thus studies on the removal of formaldehyde attract extensive attentions. In this paper, an environmentally friendly and low-cost biomass material, sodium alginate (SA) was utilized to prepare pyrene functionalized amido-amine-alginic acid (AmAA-Py) by acidification and two-step amidation, which is subsequently self-assembled on reduced graphene oxide (rGO) by π-π stacking interaction, and the final composites were acidified to afford a highly porous composite material for chemical removal of formaldehyde. The formaldehyde chemical removal performance of composite is evaluated at different conditions and find that 1.0 g of acidified alginate derivatives and graphene composites (HCl·AmAA-Py-rGO) can adsorb 69.2 mg of HCHO. Simultaneously, amino groups in amido-amine derivative of acidified sodium alginate (AmAA) can react with acidic pollutants such as H2S and HCl via forming ionic bonding without generating any other by-products, which enables efficient and environment-friendly removal of acidic pollutants. The subtle design of the highly porous composite material utilizing low-cost SA and rGO with large specific surface area opens up a new methodology for fabricating highly porous materials for efficient removal of formaldehyde and other indoor hazardous pollutants.

Structural basis of negative regulation of CRISPR-Cas7-11 by TPR-CHAT.

CRISPR‒Cas7-11 is a Type III-E CRISPR-associated nuclease that functions as a potent RNA editing tool. Tetratrico-peptide repeat fused with Cas/HEF1-associated signal transducer (TPR-CHAT) acts as a regulatory protein that interacts with CRISPR RNA (crRNA)-bound Cas7-11 to form a CRISPR-guided caspase complex (Craspase). However, the precise modulation of Cas7-11's nuclease activity by TPR-CHAT to enhance its utility requires further study. Here, we report cryo-electron microscopy (cryo-EM) structures of Desulfonema ishimotonii (Di) Cas7-11-crRNA, complexed with or without the full length or the N-terminus of TPR-CHAT. These structures unveil the molecular features of the Craspase complex. Structural analysis, combined with in vitro nuclease assay and electrophoretic mobility shift assay, reveals that DiTPR-CHAT negatively regulates the activity of DiCas7-11 by preventing target RNA from binding through the N-terminal 65 amino acids of DiTPR-CHAT (DiTPR-CHATNTD). Our work demonstrates that DiTPR-CHATNTD can function as a small unit of DiCas7-11 regulator, potentially enabling safe applications to prevent overcutting and off-target effects of the CRISPR‒Cas7-11 system.

Identification of Direct Anchoring Sites for Monoatomic Dispersion of Precious Metals (Pt, Pd, Ag) on CeO2 Support.

Monoatomic dispersion of precious metals on the surface of CeO2 nanocrystals is a highly practical approach for dramatically reducing the usage of precious metals while exploiting the unique properties of single-atom catalysts. However, the specific atomic sites for anchoring precious metal atoms on the CeO2 support and underlying chemical mechanism remain partially unknown. Herein, we show that the terminal hydroxyls on the (100) surface are the most stable sites for anchoring Ag atoms on CeO2 , indicating that CeO2 nanocubes are the most efficient substrates to achieve monoatomic dispersion of Ag. Importantly, the newly identified chemical mechanism for single-metal-atom dispersion on CeO2 nanocubes appears to be generic and can thus be extended to other precious metals (Pt and Pd). In fact, our experiments also show that atomically dispersed Pt/Pd species exhibit morphology- and temperature-dependent CO selectivity in the catalytic CO2 hydrogenation reaction.

Bioinspired Hierarchical Self-Assembled Nanozyme for Efficient Antibacterial Treatment.

Along with the rapid development and ever-deepening understanding of nanoscience and nanotechnology, nanomaterials hold promise to mimic the highly evolved biological exquisite nanostructures and sophisticated functions. Here, inspired by the ubiquitous antibacterial nanostructures on the wing surfaces of some insects, a NiCo2 O4 nanozyme with self-adaptive hierarchical nanostructure is developed that can capture bacteria of various morphotypes via the physico-mechanical interaction between the nanostructure and bacteria. Moreover, the developed biomimetic nanostructure further exhibits superior peroxidase-like catalytic activity, which can catalytically generate highly toxic reactive oxygen species that disrupt bacterial membranes and induce bacterial apoptosis. Therefore, the mechano-catalytic coupling property of this NiCo2 O4 nanozyme allows for an extensive and efficient antibacterial application, with no concerns of antimicrobial resistance. This work suggests a promising strategy for the rational design of advanced antibacterial materials by mimicking biological antibiosis.

Defect-Confinement Strategy for Constructing CuO Clusters on Carbon Nanotubes for Catalytic Oxidation of AsH3 at Room Temperature.

The efficient removal of the highly toxic arsine gas (AsH3) from industrial tail gases under mild conditions remains a formidable challenge. In this study, we utilized the confinement effect of defective carbon nanotubes to fabricate a CuO cluster catalyst (CuO/ACNT), which exhibited a capacity much higher than that of CuO supported on pristine multiwalled carbon nanotubes (MWCNT) (CuO/PCNT) for catalytically oxidizing AsH3 under ambient conditions. The experimental and theoretical results show that nitric acid steam treatment could induce MWCNT surface structural defects, which facilitated more stable anchoring of CuO and then improved the oxygen activation ability, therefore leading to excellent catalytic performance. Density functional theory (DFT) calculations revealed that the catalytic oxidation of AsH3 proceeded through stepwise dehydrogenation and subsequent recombination with oxygen to form As2O3 as the final product.

Incorporation of Epoxy Carbon onto CeO2-Supported Pt to Tackle the CO Self-Poisoning Issue.

The catalytic oxidation of carbon monoxide (CO) under ambient conditions plays a crucial role in the abatement of indoor CO, which poses risks to human health. Despite the notable activity exhibited by Pt-based catalysts in CO oxidation, their efficacy is usually diminished by the CO self-poisoning issue. In this work, three different Pt/CeO2-based catalysts, which have distinct coordinative environments of Pt but an identical Pt/CeO2 substrate structure, were synthesized by activating the catalyst with CO using different temperatures and durations. Compared with clean and graphite-covered Pt on CeO2, the one modified by epoxy carbon showed higher activity and stability. The combination of characterizations and density functional theory modeling demonstrated that the clean Pt on CeO2 rapidly deactivated due to the CO self-poisoning albeit high initial activity, and conversely, low initial activity was observed for the more stable graphite-covered catalyst due to the obstruction of the Pt site. In contrast, epoxy carbon species on Pt shifted the d-band of Pt to lower energy, weakening the Pt-CO binding strength. Such a modification mitigated the self-poisoning effect while maintaining ample active sites and enabling the complete oxidative removal of CO under ambient conditions. This work may provide a general approach to tackling the self-poisoning issue.

Synergically regulated silver species and surface oxygen on manganese oxide for promoted activity of formaldehyde oxidation.

Formaldehyde (HCHO) is a common indoor pollutant that is detrimental to human health. Its efficient removal has become an urgent demand to reduce the public health risk. In this work, Ag-MnOx-based catalysts were prepared and activated under different atmosphere (i.e., air, hydrogen (H2) and carbon monoxide (CO)) for efficient oxidation of HCHO. The catalyst activated with CO (Ag/Mn-CO) displayed the highest activity among the tested samples with 90% conversion at 100°C under a gas space velocity of 75,000 mL/(gcat·hr). Complementary characterizations demonstrate that CO reduction treatment resulted in synergically regulated content of surface oxygen on support to adsorb/activate HCHO and size of Ag particle to dissociate oxygen to oxidize the adsorbed HCHO. In contrast, other catalysts lack for either abundant surface oxygen species or metallic silver with the appropriate particle size, so that the integrate activity is limited by one specific reaction step. This study contributes to elucidating the mechanisms regulating the oxidation activity of Ag-based catalysts.

Application of digital guide plate with drill-hole sharing technique in the mandible reconstruction.

Background/purpose: With the development of computer-assisted surgery, digital guide plate was widely used in vascularized bone flap grafts for mandibular reconstruction. The purpose of this study was to design and manufacture a digital guide plate with drill-hole sharing for mandibular reconstruction and assess for surgical accuracy. Materials and methods: 17 patients that required mandibular reconstruction using fibula free flap or iliac crest free flap were included in the study. The computed tomography (CT) data of the patient's mandible and pelvis or fibula were acquired preoperatively. A surgical simulation was then performed using computer-aided surgical simulation (CASS) technology based on above date, which allowed the design of two cutting guide and a repositioning guide for mandibular reconstruction. After surgery, the accuracy of reconstruction was evaluated by superimposing the postoperative image onto the preoperative image of mandible, recording the linear and angular deviation of landmarks, measuring the differences between the planned and actual outcomes. Results: The osteotomy and repositioning of fibula or iliac crest segments were successfully performed as planned using surgical guides. The digital guide plate with drill-hole sharing showed excellent accuracy, When the iliac crest or the fibula free flap were used for mandibular reconstruction, the largest mean differences between the preoperative and postoperative were 1.11 mm and 2.8° or 1.3 mm and 3.87°. Conclusion: The digital guide plate with drill-hole sharing designed preoperatively provides a reliable method of for the mandibular reconstruction. This can assist surgeons in accurately performing osteotomy and repositioning fibula or iliac crest segments during the mandibular reconstruction.

MiR-3529-3p from PDGF-BB-induced cancer-associated fibroblast-derived exosomes promotes the malignancy of oral squamous cell carcinoma.

AIMS: This study aims to explore the role of exosomes from cancer-associated fibroblasts (CAFs) induced by PDGF-BB in promoting the malignancy of oral squamous cell carcinoma (OSCC) and provide new insight into the mechanism of OSCC progression and its treatment. MAIN METHODS: Exosomes were extracted from human oral mucosa fibroblasts (hOMFs) and CAFs. Differentially expressed miRNAs of exosomes between hOMFs and CAFs were analysed using high-throughput sequencing and self-programmed R software. Cal-27, a human tongue squamous carcinoma cell line, was treated with exosomes. Differentially expressed miRNAs between clinical cancer tissues and adjacent tissues and between hOMF and CAF exosomes were verified by qRT‒PCR. The effect of miR-3529-3p on Cal-27 cells was clarified by overexpressing or knocking down miR-3529-3p in Cal-27 cells. Sample expression and differentially expressed miRNA expression were compared between cancer and paracarcinoma tissues. KEY FINDINGS: We found that exosomes from CAFs (CAF-Exos) were internalized by tongue squamous carcinoma cells and promoted their proliferation, migration, invasion, and antiapoptotic effects. MiR-3529-3p was a significant differentially expressed miRNA between CAF-Exos and exosomes from hOMFs (hOMF-Exos). The overexpression of miR-3529-3p promoted proliferation, migration, and invasion and inhibited apoptosis of Cal-27 cells. SIGNIFICANCE: This study explores the role of PDGF-BB-induced CAFs in promoting malignancy in OSCC. This study will provide new insight into the mechanism of OSCC progression and its treatment.

Enhancing oxidation reaction over Pt-MnO2 catalyst by activation of surface oxygen.

Formaldehyde (HCHO) and carbon monoxide (CO) are both common air pollutants and hazardous to human body. It is imperative to develop the catalyst that is able to efficiently remove these pollutants. In this work, we activated Pt-MnO2 under different conditions for highly active oxidation of HCHO and CO, and the catalyst activated under CO displayed superior performance. A suite of complementary characterizations revealed that the catalyst activated with CO created the highly dispersed Pt nanoparticles to maintain a more positively charged state of Pt, which appropriately weakens the Mn-O bonding strength in the adjacent region of Pt for efficient supply of active oxygen during the reaction. Compared with other catalysts activated under different conditions, the CO-activated Pt-MnO2 displays much higher activity for oxidation of HCHO and CO. This research contributes to elucidating the mechanism for regulating the oxidation activity of Pt-based catalyst.

Electrocatalytic oxidation of gaseous toluene in an all-solid cell using a foam Ti/Sb-SnO2/ß-PbO2 anode.

Mineralization of benzene, toluene, and xylene (BTX) with high efficiency at room temperature is still a challenge for the purification of indoor air. In this work, a foam Ti/Sb-SnO2/ß-PbO2 anode catalyst was prepared for electrocatalytically oxidizing gaseous toluene in an all-solid cell at ambient temperature. The complex Ti/Sb-SnO2/ß-PbO2 anode, which was prepared by sequentially deposing Sb-SnO2 and ß-PbO2 on a foam Ti substrate, shows high electrocatalytic oxidation efficiency of toluene (80%) at 7 hr of reaction and high CO2 selectivity (94.9%) under an optimized condition, i.e., a cell voltage of 2.0 V, relative humidity of 60% and a flow rate of 100 mL/min. The better catalytic performance can be ascribed to the high production rate of ⋅OH radicals from discharging adsorbed water and the inhibition of oxygen evolution on the surface of foam Ti/Sb-SnO2/ß-PbO2 anode when compared with the foam Ti/Sb-SnO2 anode. Our results demonstrate that prepared complex electrodes can be potentially used for electrocatalytic removal of gaseous toluene at room temperature with a good performance.

Cryo-EM structures of human GPR34 enable the identification of selective antagonists.

GPR34 is a functional G-protein-coupled receptor of Lysophosphatidylserine (LysoPS), and has pathogenic roles in numerous diseases, yet remains poorly targeted. We herein report a cryo-electron microscopy (cryo-EM) structure of GPR34 bound with LysoPS (18:1) and Gi protein, revealing a unique ligand recognition mode with the negatively charged head group of LysoPS occupying a polar cavity formed by TM3, 6 and 7, and the hydrophobic tail of LysoPS residing in a lateral open hydrophobic groove formed by TM3-5. Virtual screening and subsequent structural optimization led to the identification of a highly potent and selective antagonist (YL-365). Design of fusion proteins allowed successful determination of the challenging cryo-EM structure of the inactive GPR34 complexed with YL-365, which revealed the competitive binding of YL-365 in a portion of the orthosteric binding pocket of GPR34 and the antagonist-binding-induced allostery in the receptor, implicating the inhibition mechanism of YL-365. Moreover, YL-365 displayed excellent activity in a neuropathic pain model without obvious toxicity. Collectively, this study offers mechanistic insights into the endogenous agonist recognition and antagonist inhibition of GPR34, and provides proof of concept that targeting GPR34 represents a promising strategy for disease treatment.

Tuning hydrogenation chemistry of Pd-based heterogeneous catalysts by introducing homogeneous-like ligands.

Noble metals have been extensively employed in a variety of hydrotreating catalyst systems for their featured functionality of hydrogen activation but may also bring side reactions such as undesired deep hydrogenation. It is crucial to develop a viable approach to selectively inhibit side reactions while preserving beneficial functionalities. Herein, we present modifying Pd with alkenyl-type ligands that forms homogeneous-like Pd-alkene metallacycle structure on the heterogeneous Pd catalyst to achieve the selective hydrogenolysis and hydrogenation. Particularly, a doped alkenyl-type carbon ligand on Pd-Fe catalyst is demonstrated to donate electrons to Pd, creating an electron-rich environment that elongates the distance and weakens the electronic interaction between Pd and unsaturated C of the reactants/products to control the hydrogenation chemistry. Moreover, high H2 activation capability is maintained over Pd and the activated H is transferred to Fe to facilitate C-O bond cleavage or directly participate in the reaction on Pd. The modified Pd-Fe catalyst displays comparable C-O bond cleavage rate but much higher selectivity (>90%) than the bare Pd-Fe (<50%) in hydrotreating of diphenyl ether (DPE, modelling the strongest C-O linkage in lignin) and enhanced ethene selectivity (>90%) in acetylene hydrogenation. This work sheds light on the controlled synthesis of selective hydrotreating catalysts via mimicking homogeneous analogues.

Catalytic Oxidation Mechanism of Toluene over CexMn1-xO2: The Role of Oxygen Vacancies in Adsorption and Activation of Toluene.

Catalytic oxidation has been extensively studied as a promising technology for the removal of toluene from industrial waste gases and indoor air. However, the debate regarding the oxidation mechanism is far from resolved. CexMn1-xO2 catalysts with different mixing ratios are prepared by the sol-gel method and found to exhibit better catalytic activities for toluene oxidation than a single oxide. Characterizations and theoretical calculations reveal that the doped Mn increases the number of oxygen vacancies and the ability of oxygen vacancies to activate aromatic rings, which promotes the rate-determining step of toluene oxidation, i.e., ring-opening reactions. The oxidation products detected by in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and Vocus proton transfer reaction mass spectrometry (Vocus-PTR-MS) show that the doped Mn significantly improves the ring-opening efficiency and subsequently yields more short-chain products, such as pyruvic acid and acetic acid. A comprehensive oxidation pathway of toluene is refined in this work.

Thermal Annealing Induced Surface Oxygen Vacancy Clusters in α-MnO2 Nanowires for Catalytic Ozonation of VOCs at Ambient Temperature.

Catalytic ozonation has gained considerable interest in volatile organic compound (VOC) elimination due to its mild reaction conditions. However, the low activity and mineralization rate of VOCs over catalysts hinder its practical application. Herein, a series of α-MnO2 nanowire catalysts were prepared via thermal annealing treatment at various temperatures to tailor defect species. Numerous characterization techniques were used and combined to investigate the relationship between activity and microstructure. PALS and XAFS indicated that more unsaturated manganese and oxygen vacancies, especially surface oxygen vacancy clusters, were produced in α-MnO2 under the optimal high calcination temperature. As a result, MnO2-600 was found to exhibit the best-ever performance in toluene conversion (95%) and mineralization rate (89.5%) at 20 °C, making it a promising candidate for practical use. The roles of these defects in manipulating the reactive oxygen species of α-MnO2 were clarified by quantifying the amounts of reactive oxygen species by quenching experiments and density functional theory calculations. 1O2 and ·OH species generated in the vicinity of oxygen vacancy clusters, especially the dimer oxygen vacancy cluster, were identified as key oxygen species in the abatement of toluene. This study provides a facile method to engineer the microstructure of MnO2 by means of the manipulation of oxygen vacancies and an in-depth understanding of their roles in the catalytic ozonation of VOC.

High capacity and fast removal of Cr(vi) by alkali lignin-based poly(tetraethylene pentamine-pyrogallol) sorbent.

In this work, a novel alkali lignin-based adsorption material, alkali lignin-based poly(tetraethylene pentamine-pyrogallol) (AL-PTAP), was prepared using a Mannich reaction and catechol-amine reaction for removal of Cr(vi). It was characterized by thermogravimetric analysis (TGA), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). The effects of tetraethylene pentamine (TEPA) dosage, pyrogallol (PL) dosage, contact time, pH, temperature and other factors on the adsorption behavior of the adsorbent were systematically investigated. These experimental data show that the adsorption behavior conforms to the pseudo-second-order kinetic model and the Langmuir isotherm model. The maximum adsorption capacity is 769.2 mg g-1 at 303 K, which is much higher than that of alkali lignin (AL). AL-PTAP can achieve a removal rate of almost 100% for Cr(vi) solutions with a concentration of less than 90 mg L-1 at 1 min. Furthermore, the toxic Cr(vi) is partly reduced to nontoxic Cr(iii) during the adsorption process. Therefore, AL-PTAP is a fast and efficient alkali lignin-based adsorbent, which is expected to improve the utilization value of alkali lignin in Cr(vi) wastewater treatment.

Synergistic Catalytic Oxidation of Typical Volatile Organic Compound Mixtures on Mn-Based Catalysts: Significant Promotion Effect and Reaction Mechanism.

The miscellaneous volatile organic compounds (VOCs) in industrial flue gas streams usually demonstrate significant mutual inhibition effects, and the behavior of a particular VOC in mixtures is not clear, which hinders the application of catalytic technology. This study examines the catalytic oxidation and mixing effects of representative VOCs in industrial exhausts, consisting of acetone (AC), ethyl acetate (EA), and toluene (Tol), on common Mn-based catalysts (e.g., MnO2, Mn2O3, LaMnO3, and Mn3O4) by means of intrinsic activity evaluation, coadsorption, VOC temperature-programmed oxidation, in situ diffuse reflectance infrared Fourier transform spectroscopy, and gas chromatography-mass spectrometry. The results showed no inhibiting effect on the conversion of these VOCs when combusted together; instead, a significant mutual promotion effect was found, especially on Tol destruction, with a sharp decrease in the Tol T50 from 214 to 158 °C on MnO2. It is proposed for the first time that the addition of AC/EA in Tol combustion leads to the generation of o/m-methyl phenol, which changes the rate-determining step of the ring-opening process, thus elevating the conversion of Tol together with AC and EA in the mixture at low temperatures.