A sustainable zein-based adhesive for various substrates with improved adhesion and stability.

Biomass-based adhesives are gaining attention as environmentally friendly alternatives to toxic petroleum-based adhesives. However, biomass-based adhesives exhibit poor adhesive properties and are highly susceptible to failure in humid environments. In this study, a zein-based adhesive with high adhesive strength and good water resistance was prepared by optimizing the solvent composition and adding tannic acid. Adding 10 wt% acetic acid to an aqueous ethanol solvent increased the shear strength by 45.4 % to 3.09 MPa. Moreover, the addition of 6 wt% tannic acid improved the shear strength of the zein-based adhesive in humid environments from 0.63 to 1.58 MPa. The tannic acid-reinforced zein-based adhesive exhibited good adhesive strength in both humid and dry environments, which was maintained for 30 days on glass, and could be applied to a wide range of substrates. Moreover, the adhesive showed an antioxidant activity >94 %, excellent thermal stability, biocompatibility, and antibacterial effect. Therefore, this adhesive has great application prospects in medical, packaging, and other fields.

Combined role of stearic acid and maleic anhydride in the development of thermoplastic starch-based materials with ultrahigh ductility and durability.

The diverse properties reported for starch-based materials indicate their potential for use in the preparation of biodegradable flexible actuators. However, their natural brittleness and lack of durability after modification limit their practical application. Therefore, we propose a strategy for preparing flexible starch-based composites. The results of macro/micro property characterizations and molecular dynamics simulations indicated that using starch, maleic anhydride, and stearic acid (SA), the mobility of the starch chains was enhanced and retrogradation was inhibited through the synergistic effects induced by chain breaking, complex formation with SA, and esterification of the starch molecules. In addition, the elongation at break of the modified starch (MS) reached 2070 %, and considerable ductility (>1000 %) as well as well-complexed structure were maintained after six months. Furthermore, the MS was able to undergo self-healing after fracture or a temperature-controlled stiffness transition. Moreover, it underwent complete degradation in soil within 30 d. Finally, an actuator was prepared by doping the MS with nano-Fe3O4 particles to realize a dual magnetic and optical response. Dynamic monitoring was also achieved based on the electrical signal, thereby demonstrating the broad application scope of this material in the development of biodegradable flexible actuators.

Observation of Momentum Space Josephson Effects in Weakly Coupled Bose-Einstein Condensates.

The momentum space Josephson effect describes the supercurrent flow between weakly coupled Bose-Einstein condensates (BECs) at two discrete momentum states. Here, we experimentally observe this exotic phenomenon using a BEC with Raman-induced spin-orbit coupling, where the tunneling between two local band minima is implemented by the momentum kick of an additional optical lattice. A sudden quench of the Raman detuning induces coherent spin-momentum oscillations of the BEC, which is analogous to the ac Josephson effect. We observe both plasma and regular Josephson oscillations in different parameter regimes. The experimental results agree well with the theoretical model and numerical simulation and showcase the important role of nonlinear interactions. We also show that the measurement of the Josephson plasma frequency gives the Bogoliubov zero quasimomentum gap, which determines the mass of the corresponding pseudo-Goldstone mode, a long-sought phenomenon in particle physics. The observation of momentum space Josephson physics offers an exciting platform for quantum simulation and sensing utilizing momentum states as a synthetic degree.

Effects of artificial light with different spectral compositions on refractive development and matrix metalloproteinase 2 and tissue inhibitor of metalloproteinases 2 expression in the sclerae of juvenile guinea pigs.

Artificial light can affect eyeball development and increase myopia rate. Matrix metalloproteinase 2 (MMP-2) degrades the extracellular matrix, and induces its remodeling, while tissue inhibitor of matrix MMP-2 (TIMP-2) inhibits active MMP-2. The present study aimed to look into how refractive development and the expression of MMP-2 and TIMP-2 in the guinea pigs' remodeled sclerae are affected by artificial light with varying spectral compositions. Three weeks old guinea pigs were randomly assigned to groups exposed to five different types of light: natural light, LED light with a low color temperature, three full spectrum artificial lights, i.e. E light (continuous spectrum in the range of ~390-780 nm), G light (a blue peak at 450 nm and a small valley 480 nm) and F light (continuous spectrum and wavelength of 400 nm below filtered). A-scan ultrasonography was used to measure the axial lengths of their eyes, every two weeks throughout the experiment. Following twelve weeks of exposure to light, the sclerae were observed by optical and transmission electron microscopy. Immunohistochemistry, Western blot and RT-qPCR were used to detect the MMP-2 and TIMP-2 protein and mRNA expression levels in the sclerae. After four, six, eight, ten, and twelve weeks of illumination, the guinea pigs in the LED and G light groups had axial lengths that were considerably longer than the animals in the natural light group while the guinea pigs in the E and F light groups had considerably shorter axial lengths than those in the LED group. Following twelve weeks of exposure to light, the expression of the scleral MMP-2 protein and mRNA were, from low to high, N group, E group, F group, G group, LED group; however, the expression of the scleral TIMP-2 protein and mRNA were, from high to low, N group, E group, F group, G group, LED group. The comparison between groups was statistically significant (p<0.01). Continuous, peaks-free or valleys-free artificial light with full-spectrum preserves remodeling of scleral extracellular matrix in guinea pigs by downregulating MMP-2 and upregulating TIMP-2, controlling eye axis elongation, and inhibiting the onset and progression of myopia.

Optical, Structural, and Synchrotron X-ray Absorption Studies for GaN Thin Films Grown on Si by Molecular Beam Epitaxy.

GaN on Si plays an important role in the integration and promotion of GaN-based wide-gap materials with Si-based integrated circuits (IC) technology. A series of GaN film materials were grown on Si (111) substrate using a unique plasma assistant molecular beam epitaxy (PA-MBE) technology and investigated using multiple characterization techniques of Nomarski microscopy (NM), high-resolution X-ray diffraction (HR-XRD), variable angular spectroscopic ellipsometry (VASE), Raman scattering, photoluminescence (PL), and synchrotron radiation (SR) near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. NM confirmed crack-free wurtzite (w-) GaN thin films in a large range of 180-1500 nm. XRD identified the w- single crystalline structure for these GaN films with the orientation along the c-axis in the normal growth direction. An optimized 700 °C growth temperature, plus other corresponding parameters, was obtained for the PA-MBE growth of GaN on Si, exhibiting strong PL emission, narrow/strong Raman phonon modes, XRD w-GaN peaks, and high crystalline perfection. VASE studies identified this set of MBE-grown GaN/Si as having very low Urbach energy of about 18 meV. UV (325 nm)-excited Raman spectra of GaN/Si samples exhibited the GaN E2(low) and E2(high) phonon modes clearly without Raman features from the Si substrate, overcoming the difficulties from visible (532 nm) Raman measurements with strong Si Raman features overwhelming the GaN signals. The combined UV excitation Raman-PL spectra revealed multiple LO phonons spread over the GaN fundamental band edge emission PL band due to the outgoing resonance effect. Calculation of the UV Raman spectra determined the carrier concentrations with excellent values. Angular-dependent NEXAFS on Ga K-edge revealed the significant anisotropy of the conduction band of w-GaN and identified the NEXAFS resonances corresponding to different final states in the hexagonal GaN films on Si. Comparative GaN material properties are investigated in depth.

Starch-fiber foaming biodegradable composites with polylactic acid hydrophobic surface.

Starch and plant fibers are abundant natural polymers that offer biodegradability, making them potential substitutes for plastics in certain applications, but are usually limited by its high hydrophilicity, and low mechanical performance. To address this issue, polylactic acid (PLA) is blended with cellulose and chitosan to create a waterproof film that can be applied to starch-fiber foaming biodegradable composites to enhance their water resistance properties. Here, plant fibers as a reinforcement is incorporated to the modified starch by foaming mold at 260 °C, and PLA based hydrophobic film is coated onto the surface to prepare the novel hydrophobic bio-composites. The developed bio-composite exhibits comprehensive water barrier properties, which is significantly better than that of traditional starch and cellulose based materials. Introducing PLA films decreases water vapor permeability from 766.83 g/m2·24h to 664.89 g/m2·24h, and reduce hysteresis angles from 15.57° to 8.59° within the first five minutes after exposure to moisture. The water absorption rate of PLA films also decreases significantly from 12.3 % to 7.9 %. Additionally, incorporating hydrophobic films not only enhances overall waterproof performance but also improves mechanical properties of the bio-composites. The fabricated bio-composite demonstrates improved tensile strength from 2.09 MPa to 3.53 MPa.

Stark Effects of Rydberg Excitons in a Monolayer WSe2 P-N Junction.

The enhanced Coulomb interaction in two-dimensional semiconductors leads to tightly bound electron-hole pairs known as excitons. The large binding energy of excitons enables the formation of Rydberg excitons with high principal quantum numbers (n), analogous to Rydberg atoms. Rydberg excitons possess strong interactions among themselves as well as sensitive responses to external stimuli. Here, we probe Rydberg exciton resonances through photocurrent spectroscopy in a monolayer WSe2 p-n junction formed by a split-gate geometry. We show that an external in-plane electric field not only induces a large Stark shift of Rydberg excitons up to quantum principal number 3 but also mixes different orbitals and brightens otherwise dark states such as 3p and 3d. Our study provides an exciting platform for engineering Rydberg excitons for new quantum states and quantum sensing.

Simulating the effects of optimizing sowing date and variety shift on maize production at finer scale in northeast China under future climate.

BACKGROUND: Global warming and the rising occurrences of climate extremes have become formidable challenges for maize production in northeast China. The optimization of sowing date and variety choice stand out as two economic approaches for maize to enhance its resilience to climate change. Nevertheless, assessment of the potential of optimizing sowing date and variety shift on maize yield at finer scale remains underexamined. This study investigated the implications of optimizing sowing date and implementing variety shift on maize yield from a regional perspective. RESULTS: Compared to the reference period (1986-2005), climate change would decrease by 11.5-34.6% (the range describes the differences among climate scenarios and agro-ecological regions) maize yield in the 2050s (2040-2059) if no adaption measure were to be implemented. The combined adaption (optimizing sowing date and variety shift) can improve maize yield by 38.8 ± 11.3%, 42.7 ± 9.7% and 33.9 ± 7.6% under the SSP1-2.6, SSP2-4.5 and SSP5-8.5 scenarios, respectively. The current sowing window typically falls within the projected optimal sowing window, defined as the period capable of achieving 90% of the maximum yield within the potential sowing window under future climate conditions. Consequently, the potential of the effect of optimizing sowing window on maize yield is limited. In contrast, variety shift results in higher yield improvement, as temperature rise creates favorable conditions for transplanting varieties with an extended growth period, particularly in high latitudes and mountainous regions. Under future climate, cumulative precipitation and compound drought and hot days during maize growing seasons are two key factors influencing maize production. CONCLUSIONS: The optimization of sowing date and variety choice can improve maize yield in northeast China. In addition, maize production should consider varieties with longer growth period and drought and heat tolerance to adapt to climate change. © 2023 Society of Chemical Industry.

Insight into modified CeMn based catalysts for efficient degradation of toluene by in situ infrared.

Trace activated carbon (AC) and diatomaceous earth (DE) were used as structural promoters to be incorporated into Ce-Mn-based solid-solution catalysts by the redox precipitation method. The modified catalysts exhibit superior reducibility, with abundant Ce3+, Mn3+and reactive oxygen species, which are facilitated to the migration of oxygen and the generation of oxygen vacancies. In particular, the catalytic combustion temperatures of 90 % toluene (3000 ppm) on Ce1Mn3Ox-AC/DE were 84 °C (dry) and 123 °C (10 vol% H2O), respectively. The role of lattice oxygen and adsorbed oxygen was revealed by in situ DRIFTS. Additionally, in situ DRIFTS was employed to verify that the degradation of toluene by Ce1Mn3Ox-AC/DE satisfied the Langmuir-Hinshelwood (L-H) mechanism and the Mars-Van Krevelen (MvK) mechanism. The possible reaction pathway was elucidated (toluene → benzyl alcohol → benzoic acid → maleic anhydride → CO2 + H2O). Furthermore, final products attributed to toluene oxidation were detected by in situ DRIFTS at 50 °C in the absence of oxygen, confirming that the catalyst possessed outstanding performance at low temperatures beyond mere adsorption.

Chemically bonded multi-nanolayer inorganic aerogel with a record-low thermal conductivity in a vacuum.

Inorganic aerogels have exhibited many superior characteristics with extensive applications, but are still plagued by a nearly century-old tradeoff between their mechanical and thermal properties. When reducing thermal conductivity by ultralow density, inorganic aerogels generally suffer from large fragility due to their brittle nature or weak joint crosslinking, while enhancing the mechanical robustness by material design and structural engineering, they easily sacrifice thermal insulation and stability. Here, we report a chemically bonded multi-nanolayer design and synthesis of a graphene/amorphous boron nitride aerogel to address this typical tradeoff to further enhance mechanical and thermal properties. Attributed to the chemically bonded interface and coupled toughening effect, our aerogels display a low density of 0.8 mg cm-3 with ultrahigh flexibility (elastic compressive strain up to 99% and bending strain up to 90%), and exceptional thermostability (strength degradation <3% after sharp thermal shocks), as well as the lowest thermal conductivities in a vacuum (only 1.57 mW m-1 K-1 at room temperature and 10.39 mW m-1 K-1 at 500°C) among solid materials to date. This unique combination of mechanical and thermal properties offers an attractive material system for thermal superinsulation at extreme conditions.

Quadrupolar excitons and hybridized interlayer Mott insulator in a trilayer moiré superlattice.

Transition metal dichalcogenide (TMDC) moiré superlattices, owing to the moiré flatbands and strong correlation, can host periodic electron crystals and fascinating correlated physics. The TMDC heterojunctions in the type-II alignment also enable long-lived interlayer excitons that are promising for correlated bosonic states, while the interaction is dictated by the asymmetry of the heterojunction. Here we demonstrate a new excitonic state, quadrupolar exciton, in a symmetric WSe2-WS2-WSe2 trilayer moiré superlattice. The quadrupolar excitons exhibit a quadratic dependence on the electric field, distinctively different from the linear Stark shift of the dipolar excitons in heterobilayers. This quadrupolar exciton stems from the hybridization of WSe2 valence moiré flatbands. The same mechanism also gives rise to an interlayer Mott insulator state, in which the two WSe2 layers share one hole laterally confined in one moiré unit cell. In contrast, the hole occupation probability in each layer can be continuously tuned via an out-of-plane electric field, reaching 100% in the top or bottom WSe2 under a large electric field, accompanying the transition from quadrupolar excitons to dipolar excitons. Our work demonstrates a trilayer moiré system as a new exciting playground for realizing novel correlated states and engineering quantum phase transitions.

Exciton Superposition across Moiré States in a Semiconducting Moiré Superlattice.

Moiré superlattices of semiconducting transition metal dichalcogenides enable unprecedented spatial control of electron wavefunctions, leading to emerging quantum states. The breaking of translational symmetry further introduces a new degree of freedom: high symmetry moiré sites of energy minima behaving as spatially separated quantum dots. We demonstrate the superposition between two moiré sites by constructing a trilayer WSe2/monolayer WS2 moiré heterojunction. The two moiré sites in the first layer WSe2 interfacing WS2 allow the formation of two different interlayer excitons, with the hole residing in either moiré site of the first layer WSe2 and the electron in the third layer WSe2. An electric field can drive the hybridization of either of the interlayer excitons with the intralayer excitons in the third WSe2 layer, realizing the continuous tuning of interlayer exciton hopping between two moiré sites and a superposition of the two interlayer excitons, distinctively different from the natural trilayer WSe2.

Topological Microlaser with a Non-Hermitian Topological Bulk.

Bulk-edge correspondence, with quantized bulk topology leading to protected edge states, is a hallmark of topological states of matter and has been experimentally observed in electronic, atomic, photonic, and many other systems. While bulk-edge correspondence has been extensively studied in Hermitian systems, a non-Hermitian bulk could drastically modify the Hermitian topological band theory due to the interplay between non-Hermiticity and topology, and its effect on bulk-edge correspondence is still an ongoing pursuit. Importantly, including non-Hermicity can significantly expand the horizon of topological states of matter and lead to a plethora of unique properties and device applications, an example of which is a topological laser. However, the bulk topology, and thereby the bulk-edge correspondence, in existing topological edge-mode lasers is not well defined. Here, we propose and experimentally probe topological edge-mode lasing with a well-defined non-Hermitian bulk topology in a one-dimensional (1D) array of coupled ring resonators. By modeling the Hamiltonian with an additional degree of freedom (referred to as synthetic dimension), our 1D structure is equivalent to a 2D non-Hermitian Chern insulator with precise mapping. Our Letter may open a new pathway for probing non-Hermitian topological effects and exploring non-Hermitian topological device applications.

[PACS and Photoshop assisted isosceles triangle osteotomy and Kirschner wire tension buckle fixation in the treatment of cubitus varus in children].

OBJECTIVE: To investigate the clinical efficacy of picture archiving and communication system (PACS) and Photoshop assisted isosceles triangle osteotomy and Kirschner wire fixation with tension band in the treatment of cubitus varus in children. METHODS: The clinic data of 20 children with cubitus varus treated with isosceles triangle osteotomy of distal humerus and Kirschner wire fixation with tension band from October 2014 to October 2019, were retrospectively analyzed. There were 13 males and 7 females, aged from 3.2 to 13.5 years old, the median age was 6.65 years old. PACS system was applied for the osteotomy design preoperatively, simulating and measuring the side length of isosceles triangle osteotomy. Then, Photoshop system was used to simulate the preoperative and postoperative osteotomy graphics, which could guide precise osteotomy during operation. RESULTS: All the 20 patients were followed up for 20 to 24 months, with a median of 22.5 months. At the last follow-up, the carrying angle of the affected limb was 5 ° to 13 °, with a median of 8.3 °. The clinical efficacy was evaluated according to the Flynn elbow function score:excellent in 16 cases, good in 2 cases, and fair in 2 cases. CONCLUSION: The treatment of cubitus varus in children by isosceles triangle osteotomy and Kirschner wire fixation with tension band assisted by PACS and Photoshop system has shown good clinical outcome.

Effects of artificial light with different spectral composition on eye axial growth in juvenile guinea pigs.

The purpose of the study was to investigate the effect of artificial light with different spectral composition and distribution on axial growth in guinea pigs. Three-week-old guinea pigs were randomly assigned to groups exposed to natural light, low color temperature light-emitting diode (LED) light, two full spectrum artificial lights (E light and Julia light) and blue light filtered light with the same intensity. Axial lengths of guinea pigs' eyes were measured by A-scan ultrasonography prior to the experiment and every 2 weeks during the experiment. After light exposure for 12 weeks, retinal dopamine (DA), dihydroxy-phenylacetic acid (DOPAC) levels and DOPAC/DA ratio were analyzed by high-pressure liquid chromatography electrochemical detection and retinal histological structure was observed. Retinal melanopsin expression was detected using Western blot and immunohistochemistry. After exposed to different kinds of light with different spectrum for 4 weeks, the axial lengths of guinea pigs' eyes in LED group and Julia light group were significantly longer than those of natural light group. After 6 weeks, the axial lengths in LED light group were significantly longer than those of E light group and blue light filtered group. The difference between axial lengths in E light group and Julia light group showed statistical significance after 8 weeks (p<0.05). After 12 weeks of light exposure, the comparison of retinal DOPAC/DA ratio and melanopsin expression in each group was consistent with that of axial length. In guinea pigs, continuous full spectrum artificial light with no peak or valley can inhibit axial elongation via retinal dopaminergic and melanopsin system.

A unified model for large-scale thickness measurement of lubricating film based on ultrasonic lag phase slope.

A unified model based on the ultrasonic lag phase slope is developed for measuring the lubricating film thickness at a large scale. The ultrasonic lag phase of adjacent waves instead of the phase of overlapped waves is calculated as a function of the ultrasonic frequency and film thickness. The slope of the ultrasonic lag phase is determined correspondingly, which is linearly proportional to the lubricating film thickness. Both the finite element analysis and tests on the lubricating film thickness are performed to verify the proposed method. The results show that despite the fluctuations of the lag phase, the lag phase slope can be used for measuring the lubricating film thickness at a large scale from 0.1 µm to 170 µm.

Recent advances and future challenges of the starch-based bio-composites for engineering applications.

Starch is regarded as one of the most promising sustainable materials due to its abundant yield and excellent biodegradability. From the perspective of practical engineering applications, this paper systematically describes the development of starch-based bio-composites in the past decade. Packaging properties, processing characteristics, and current challenges for the efficient processing of starch-based bio-composites are reviewed in industrial packaging. Green coatings, binders, adsorbents, flocculants, flame retardants, and emulsifiers are used as examples to illustrate the versatility of starch-based bio-composites in chemical agent applications. In addition, the work compares the application of starch-based bio-composites in conventional spinning with emerging spinning technologies and describes the challenges of electrostatic spinning for preparing nanoscale starch-based fibers. In terms of flexible electronics, the starch-based bio-composites are regard as a solid polymer electrolyte and easily modified porous material. Moreover, we describe the applications of the starch-based gels in tissue engineering, controlled drug release, and medical dressings. Finally, the theoretical input and technical guidance in the advanced sustainable engineering application of the starch-based bio-composites are provided in the work.

Experimental Study of Preheated Secondary Air on the Performance of an Updraft Coal Heating Stove.

Although the Chinese government encourages using clean fuels for heating, many households in remote areas still rely on coal as their energy, especially in the Qinghai Tibet Plateau. An updraft coal heating stove was modified to preheat secondary air. The performance of the modified stove was studied compared with a baseline stove. The temperatures in the combustion chamber and near the chimney exit are measured, and the undiluted exhaust concentrations of CO, NO x , and SO2 are obtained. The results indicated that the temperatures and exhaust gas concentrations varied periodically with the coal addition. The oxygen concentration in the flue gas for the modified stove is higher than that for the baseline stove, and the O2 concentration was decreased with the increase in fuel feed rate. The CO concentration peaked 5-15 min after fuel addition and descended quickly toward a baseline with the higher fuel feed rates. It remained almost unchanged at the beginning and then slightly increased when the combustion began to fade with a lower fuel feed rate for the modified stove. The NO x emission for the modified stove is generally lower than that for the baseline stove. The NO x formation during coal combustion mainly comes from prompt NO and fuel NO, while the SO2 emission is mainly related to the sulfur element in the raw coal in the present work. The modified stove is effective in reducing NO x and SO2 emissions. However, the CO emission of the modified stove is higher than that of the baseline stove, especially at the end of the batch.

Construction of photo-induced zinc-doped carbon dots based on drug-resistant bactericides and their application for local treatment.

In this project, we propose a highly effective photosensitizer that breaks through drug-resistant bacterial infections with zinc-doped carbon dots. By passing through the membrane of drug-resistant bacteria, the photosensitizers produce ROS in bacteria under the action of blue light to directly kill bacteria, so as to realize the antibacterial local treatment of drug-resistant bacteria. The experiment firstly uses an efficient one-step hydrothermal method to prepare zinc-doped red-light CDs as photosensitizers, in which zinc metal was doped to improve the optical properties of the CDs. Then we try first to use EDTA as a second-step attenuator for preparing CDs to obtain photosensitizers with high-efficiency and low toxicity. In vitro cytotoxicity tests, bacterial effect tests, and in vivo animal experiments have also demonstrated that this antibacterial method has great potential for clinical translation, with a bactericidal efficiency of up to 90%. More notably, we used this antibacterial regimen seven times repeatedly to simulate the bacterial resistance process, with a bactericidal efficiency of up to 90% every time. The result indicated that S. aureus did not develop resistance to our method, showing that our method has the potential to break through drug-resistant bacterial infections as an alternative to antibiotic candidates.