ABSTRACT
Chickpea (Cicer arietinum L.) is a significant dietary source of flavonoids and the hypoglycemic activity were investigated in this study. Firstly, total twenty nine chickpea flavonoids were identified by UPLC-MS/MS with ononin, cyanidin-3-O-glucoside, astragalin, cynaroside, kaempferol-3-O-rutinoside, biochanin A, and daidzin being the most abundant among them. Our results demonstrated that chickpea flavonoids regulated glucose metabolism and lipid metabolism, and reduced oxidative stress in insulin resistance HepG2 cells. Furthermore, insulin resistance was ameliorated by chickpea flavonoids through the activation of insulin receptor substrate1 (IRS1), phosphoinositide 3-kinase (PI3K), and phosphorylated protein kinase B (Akt) in HepG2 cells. More importantly, key differential metabolites include L-tryptophan, L-tyrosine, l-glutamine and linoleic acid were reserved by chickpea flavonoids and correlated with glucolipid metabolism and oxidative stress in IR-HepG2 cells. In conclusion, these results indicated that chickpea flavonoids might act as potential natural products regulating insulin resistance in HepG2 cells.
ABSTRACT
Microplastics (MPs), discovered in oceans, lakes, and rivers, can infiltrate the food chain through ingestion by organisms, potentially posing health risks. Our research is the first to study the composition and distribution of MPs in Bosten Lake's sediment. In May, the average abundance of MPs was 0.95±0.72 particles per 10 gs, and in October, it was 0.90±0.61 particles per 10 gs. Bohu Town had the highest MP abundance, with 1.75±0.35 particles per 10 gs in spring and 2 ± 0 particles per 10 gs in autumn. In May, 53 % of the MPs were transparent, while in October, black MPs constituted 58 %. The predominant morphology was fibrous, accounting for 61 % of the total. MPs in the size range of 0.2-1 mm made up 91 % and 66 % of the total in May and October, respectively. The most common types of MPs in May were polyethylene terephthalate (PET) at 40 % and polyethylene (PE) at 26 %. In October, PET was the most prevalent at 71 %, followed by poly(ether-ether-ketone)(PEEK) at 11 %. Certain microbial taxa, such as Actinobacteriota, Pseudomonas, and Vicinamibacteraceae, associated with MP degradation or complex carbon chain breakdown, were notably enriched in sediment areas with high MP concentrations. A significant positive correlation was observed between the abundance of MPs in sediments and Actinobacteriota. Additionally, the abundance of Thiobacillus, Ca.competibacter, and other bacteria involved in soil element cycling showed a significant positive correlation with the organic matter content in the sediments. Anaerobic bacteria like Thermoanaerobacterium displayed a significant positive correlation with water depth. Our study reveals the presence, composition, and distribution of MPs in Bosten Lake's sediments, shedding light on their potential ecological impact.
Subject(s)
Geologic Sediments , Microbiota , Microplastics , Geologic Sediments/chemistry , Geologic Sediments/microbiology , Microplastics/metabolism , Lakes/chemistry , Lakes/microbiology , Boston , Spectroscopy, Fourier Transform Infrared , Spectrum Analysis, Raman , Color , Water Pollutants/metabolism , Environmental MonitoringABSTRACT
Drying, as a critical step in the production of air-dried beef, has a direct impact on the quality of the final product. Innovatively, a composite system incorporating contact ultrasound (CU) and infrared radiation (IR) as auxiliary measures within a hot air drying (HAD) framework was built in this research, and the effects of these techniques on the drying kinetics, protein denaturation, and moisture transformation of air-dried beef were investigated. In comparison to HAD treatment, the integrated CU and IR (CU-IRD) system displayed marked enhancements in heat and moisture transport efficiency, thereby saving 36.84% of time expenditure and contributing favorably to the improved moisture distribution of the end-product. This was mainly ascribed to the denaturation of myosin induced by IR thermal effect and the micro-channel produced by CU sponge effect, thus increasing T2 relaxation time and the proportion of free water. In conclusion, the composite system solved the problem of surface hardening and reduces hardness and chewiness of air-dried beef by 40.42% and 45.25% respectively, but inevitably increased the energy burden by 41.60%.
Subject(s)
Air , Desiccation , Infrared Rays , Water , Water/chemistry , Kinetics , Desiccation/methods , Cattle , Animals , Ultrasonic Waves , Hot Temperature , Red Meat , Physical PhenomenaABSTRACT
With the internationalization of Chinese culture, ready-to-cook Chinese food has become popular. Vegetables in Chinese preparations are usually cut into slices, cubes, and shreds. Carrots, as a typical Chinese side dish, were selected as the model in this work. The polyphenol content, antioxidant capacity, O2-, hydrogen peroxide, malondialdehyde, lignin, antioxidant enzymes, and other enzymes activities were analyzed. The results indicated that these parameters were insignificantly different between three cutting styles. Therefore, metabolomics is further employed. Pathway enrichment indicated that glyceollin II and 6â³-malonylgenistin were metabolites particularly expressed in the isoflavonoid biosynthesis pathway; (+)-gallocatechin, trans-chlorogenic acid, and (-)-epiafzelechin were specifically identified in the flavonoid biosynthesis pathway after slicing; and shredding caused the expression of coniferyl aldehyde and eugenol, which were specifically expressed in the phenylpropanoid biosynthesis pathway. These results indicate that different cutting styles do not change the physiological indicators of carrots but induce the expression of specific metabolites.
ABSTRACT
Low-cost, reliable, and efficient biosensors are crucial in detecting residual heavy metal ions (HMIs) in food products. At present, based on distance-induced localized surface plasmon resonance of noble metal nanoparticles, enzyme-mimetic reaction of nanozymes, and chelation reaction of metal chelators, the constructed optical sensors have attracted wide attention in HMIs detection. Besides, based on the enrichment and signal amplification strategy of nanomaterials on HMIs and the construction of electrochemical aptamer sensing platforms, the developed electrochemical biosensors have overcome the plague of low sensitivity, poor selectivity, and the inability of multiplexed detection in the optical strategy. Moreover, along with an in-depth discussion of these different types of biosensors, a detailed overview of the design and application of innovative devices based on these sensing principles was provided, including microfluidic systems, hydrogel-based platforms, and test strip technologies. Finally, the challenges that hinder commercial application have also been mentioned. Overall, this review aims to establish a theoretical foundation for developing accurate and reliable sensing technologies and devices for HMIs, thereby promoting the widespread application of biosensors in the detection of HMIs in food.
Subject(s)
Biosensing Techniques , Food Contamination , Metals, Heavy , Biosensing Techniques/methods , Biosensing Techniques/instrumentation , Metals, Heavy/analysis , Food Contamination/analysis , Food Analysis/methods , Food Analysis/instrumentationABSTRACT
Polysaccharide-functionalized gold nanoparticles (Polysaccharide-Au NPs) with high stability were successfully prepared by a straightforward method. Notably, the Au (III) ion acts as a strong Lewis acid to facilitate glycosidic bond breaking. Subsequently, the polysaccharide conformation was transformed to an open-chain form, exposing highly reduced aldehyde or ketone groups that reduce Au (III) to Au (0) crystal species, further growing into Au NPs. As-prepared Au NPs displayed excellent stability over a longer storage period (more than 70 days), a wide range of temperatures (25-60 °C), and pH range (3-11), varying concentrations (0-200 mM) and types of salt ions (Na+, K+, Ca2+, Mg2+), and glutathione solutions (5 mM). More interestingly, polysaccharide-Au NPs retained the antioxidant activity of polysaccharides and reduced oxidative damage at the cellular level through decreased reactive oxygen species (ROS) production. The intracellular levels of ROS pretreated with polysaccharide and polysaccharide-Au NPs were decreased 53.12-75.85 % compared to the H2O2 group, respectively. Therefore, the green synthesized Au NPs from natural active polysaccharides exhibit potential applications in biomedical fields.
Subject(s)
Antioxidants , Metal Nanoparticles , Antioxidants/pharmacology , Reactive Oxygen Species , Hydrogen Peroxide , Gold/chemistry , Metal Nanoparticles/chemistry , Polysaccharides/pharmacologyABSTRACT
Existing research of non-unidirectional cleanrooms generally suggests that lower-side return air outlets provide better control effect on indoor particle concentration. As a result, there has been relatively less focus on return air outlets. However, installing return air outlets oriented towards operators as particle emission sources can reduce the impact on process layout and improve space utilization, while also provide less impact from upper particle emission sources on the workbench area. To investigate the characteristics of return air outlet for operators (abbreviated as H), this study compared the particle concentration distribution, non-uniformity, and purification efficiency of return air oultet H and the traditional lower-side (abbreviated as L) return air outlets by experiments and CFD simulations. Based on the theory of mass conservation, the expression of required air supply volume under equivalent cleanroom conditions was derived. Under corresponding experimental and simulation conditions, the particle concentration differences range from 2.0% to 12.7% for return air outlet H and from 12.4% to 33.2% for return air outlet L, and these differences gradually decrease with the air exchange rate (ACH) increases. The results show that ACH = 20 is sufficient for cleanliness requirements with return air outlet H when there is one person in the cleanroom, while a higher rate of ACH = 35 is needed when there are two persons. Although lower-side return air outlets have certain potential for reducing particle concentration in the cleanroom, increasing the air exchange rate remains the most effective method to control indoor particle concentration. Compared to the traditional lower-side return air outlet L, the ranges of the non-uniformity coefficients for return air outlet H and L are 0.50 to 0.67 and 0.45 to 0.53, respectively. The average non-uniformity coefficient differs by 11.9%, and there is not a significant difference in uniformity with more than 20 air changes per hour. The use of return air outlets H only requires an additional 11% of air supply volume to achieve the same cleanliness, demonstrating its effectiveness in controlling particle concentration. It is suitable for cleanrooms with higher requirements for workbenches and for cleanrooms with restricted floor usage or requiring flexible layouts. The study also explores the impact of width of return air outlet oriented towards operators as particle emission sources, the results show that the larger-sized outlets facilitate the particle discharge and control the particle distribution inside the room.
Subject(s)
Body Fluids , Respiratory Physiological Phenomena , Humans , Computer Simulation , Patient Discharge , Particle SizeABSTRACT
For individuals with celiac disease (CD), the current clinical therapy option available is a lifelong gluten-free diet. Therefore, it is essential to swiftly and efficiently detect gluten in foods. A colorimetric sensor has been developed, which operates by regulating the aggregation and dispersion state of AuNPs induced by high concentration NaCl through the specific binding of gliadin and aptamer, thereby achieving rapid detection of gliadin in flour. It is found that the sensor exhibits good linearity in the concentration range of 0.67-10 µM and the LOD (3σ/S) is 12 nM. And it can accurately distinguish various types of free-gliadin samples, with a spiked recovery rate of 85%-122.3%. To make the detection process more convenient, the colorimetric results of the biosensor were translated into RGB color-gamut parameters by a smartphone color-picking program for further analysis. Gliadin can still be accurately quantified with the established smartphone platform, and a correlation coefficient of 0.988 was found. The proposed portable smartphone aptamer colorimetric sensing device has achieved satisfactory results in the rapid detection of gliadin in food.
ABSTRACT
In this study, a rapid, inexpensive, and accurate colorimetric sensor for detecting psychrophilic bacteria was designed, comprising gold (Au) nanoparticles (NPs) modified by d-amino acid (D-AA) as color-metric probes. Based on the aggregation of Au NPs induced by psychrophilic bacteria, a noticeable color shift occurred within 6 h. Depending on the various metabolic behaviors of bacteria to different D-AA, four primary psychrophilic bacteria in raw milk were successfully distinguished by learning the response patterns. Furthermore, the quantification of single bacteria and the practical application in milk samples could be realized. Notably, a rapid colorimetric method was constructed by combining Au/D-AA with antibiotics for the minimum inhibitory concentration of psychrophilic bacteria, which relied on differences in bacteria metabolic activity in response to diverse antibiotic treatments. Therefore, the method enables the rapid detection and susceptibility evaluation of psychrophilic bacteria, promoting clinical practicability and antibiotic management.
ABSTRACT
To improve the delightful flavor of mulberry wine through semi-artificial inoculation fermentation with Saccharomyces cerevisiae, we studied the dynamics change of microbiota, along with the physicochemical properties and metabolite profiles and their interaction relationship during the fermentation process. The abundance of lactic acid bacteria (Weissella, Lactobacillus, Fructobacillus, and Pediococcus) increased significantly during fermentation, while yeasts gradually established dominance. The inter-kingdom network of the dominant genera analysis further identified the following as core microbiota: Alternaria, Botrytis, Kazachstania, Acremonium, Mycosphaerella, Pediococcus, Gardnerella, and Schizothecium. Additionally, pH, alcohol, and total acid were significantly affected by microbiota variation. Fourteen of all identified volatile compounds with key different aromas were screened using PCA, OPLS-DA, and rOAV. The network of interconnected core microbiota with key different aromas revealed that Kazachstania and Pediococcus had stronger correlations with 1-butanol, 3-methyl-, propanoic acid, and 2-methyl-ethyl ester.
ABSTRACT
This study employed mixed bacterial strains to ferment seabuckthorn seed meal into peptides, and conducted a comprehensive evaluation of the growth adaptive conditions, molecular weight distribution, volatile compounds, and in vitro hypoglycemic activity required for fermentation. Results showed that when the amount of maltose was 1.1% and MgSO4·7H2O was added at 0.15 g/L, the peptide yield reached 43.85% with a mixed fermentation of Lactobacillus fermentum, Bacillus subtilis, Lactobacillus casei, Lactobacillus rhamnosus, and Lactobacillus acidophilus. Components with a molecular weight below 1 kDa were found to be more effective in inhibiting the activity of α-amylase and α-glucosidase, with the identified sequence being FYLPKM. Finally, SPME/GC-MS results showed that 86 volatile components were detected during the fermentation of seabuckthorn seed meal, including 22 alcohols, 9 acids, 7 ketones, 14 alkanes, 20 esters, and 14 other compounds. With prolonged fermentation time, the content of acids and esters increased significantly.
ABSTRACT
Spectral remote sensing reflectance, Rrs(λ) (sr-1), is the fundamental quantity used to derive a host of bio-optical and biogeochemical properties of the water column from satellite ocean color measurements. Estimation of uncertainty in those derived geophysical products is therefore dependent on knowledge of the uncertainty in satellite-retrieved Rrs. Furthermore, since the associated algorithms require Rrs at multiple spectral bands, the spectral (i.e., band-to-band) error covariance in Rrs is needed to accurately estimate the uncertainty in those derived properties. This study establishes a derivative-based approach for propagating instrument random noise, instrument systematic uncertainty, and forward model uncertainty into Rrs, as retrieved using NASA's multiple-scattering epsilon (MSEPS) atmospheric correction algorithm, to generate pixel-level error covariance in Rrs. The approach is applied to measurements from Moderate Resolution Imaging Spectroradiometer (MODIS) on the Aqua satellite and verified using Monte Carlo (MC) analysis. We also make use of this full spectral error covariance in Rrs to calculate uncertainty in phytoplankton pigment chlorophyll-a concentration (chla, mg/m3) and diffuse attenuation coefficient of downwelling irradiance at 490â nm (Kd(490), m-1). Accounting for the error covariance in Rrs generally reduces the estimated relative uncertainty in chla by â¼1-2% (absolute value) in waters with chla < 0.25â mg/m3 where the color index (CI) algorithm is used. The reduction is â¼5-10% in waters with chla > 0.35â mg/m3 where the blue-green ratio (OCX) algorithm is used. Such reduction can be higher than 30% in some regions. For Kd(490), the reduction by error covariance is generally â¼2%, but can be higher than 20% in some regions. The error covariance in Rrs is further verified through forward-calculating chla from MODIS-retrieved and in situ Rrs and comparing estimated uncertainty with observed differences. An 8-day global composite of propagated uncertainty shows that the goal of 35% uncertainty in chla can be achieved over deep ocean waters (chla ≤ 0.1â mg/m3). While the derivative-based approach generates reasonable error covariance in Rrs, some assumptions should be updated as our knowledge improves. These include the inter-band error correlation in top-of-atmosphere reflectance, and uncertainties in the calibration of MODIS 869â nm band, in ancillary data, and in the in situ data used for system vicarious calibration.
ABSTRACT
During surgery, the use of a high-frequency electric knife produces smoke, which can be harmful to the health of indoor medical staff and patients. The quantity and particle size distribution of smoke particles produced by different tissues may vary. Understanding the release characteristics of these smoke particles is necessary to clarify their impact on the surgical environment and to seek effective smoke control methods. A previous comparative analysis of human and pig tissues revealed that they share similar water and fat compositions in certain anatomical regions. In this study, we investigated the emission characteristics of smoke particles from various tissues of pigs (skeletal muscle, liver, kidney, skin, and subcutaneous fat) under different operating powers of an electric knife. We measured the indoor particle number concentration (particle concentration), and estimated the PM2.5 mass concentration (PM2.5 concentration), particle size distribution, and emission rate of the smoke particles. The study obtained the particle emission rates of different tissues under different electric knife operating powers, results of which showed that (1) during the operation of the electric knife, mainly small particles below 1 µm are produced. Among them, particles of 0.3 µm were the most abundant, with a particle concentration level of up to 109 particles/m3, accounting for 85.17-97.64% of the total particle number, and as the particle size increased, the particle concentration and percentage decreased significantly. (2) The water and fat compositions of different tissues influenced the indoor particle concentration and emission rate of the smoke emitted by the electric knife. Among different tissues, subcutaneous fat tissue had the lowest particle concentration and emission rate. (3) The electric knife operating power mainly affected particles below 1 µm, and except for kidney tissue, the indoor concentration and emission rate of these particle sizes were positively correlated with the power. The experimental results can provide data reference for the use of high-frequency electric knives in surgeries involving different human tissues in the operating room.
Subject(s)
Air Pollutants , Air Pollution, Indoor , Humans , Animals , Swine , Smoke/adverse effects , Smoke/analysis , Particulate Matter/analysis , Particle Size , Electricity , Water/analysis , Air Pollution, Indoor/analysis , Air Pollutants/analysisABSTRACT
Real-time monitoring of health conditions is an emerging strong issue in health care, internet information, and other strongly evolving areas. Wearable electronics are versatile platforms for non-invasive sensing. Among a variety of wearable device principles, fiber electronics represent cutting-edge development of flexible electronics. Enabled by electrochemical sensing, fiber electronics have found a wide range of applications, providing new opportunities for real-time monitoring of health conditions by daily wearing, and electrochemical fiber sensors as explored in the present report are a promising emerging field. In consideration of the key challenges and corresponding solutions for electrochemical sensing fibers, we offer here a timely and comprehensive review. We discuss the principles and advantages of electrochemical sensing fibers and fabrics. Our review also highlights the importance of electrochemical sensing fibers in the fabrication of "smart" fabric designs, focusing on strategies to address key issues in fiber-based electrochemical sensors, and we provide an overview of smart clothing systems and their cutting-edge applications in therapeutic care. Our report offers a comprehensive overview of current developments in electrochemical sensing fibers to researchers in the fields of wearables, flexible electronics, and electrochemical sensing, stimulating forthcoming development of next-generation "smart" fabrics-based electrochemical sensing.
Subject(s)
Biosensing Techniques , Wearable Electronic Devices , ElectronicsABSTRACT
In this study, we explored the use of plasma-activated water (PAW) in combination with ultrasound (US) for food disinfection. Our research introduces a novel approach that utilizes a pulsed-control (PC) method to modify the PAW. The resulting PCPAW exhibits significantly higher concentrations of key reactive oxygen and nitrogen species (RONS) compared to conventional PAW. The disinfection efficacy of US-PCPAW against fresh-cut lettuce was compared to that of US-PAW, US, and PCPAW. The combination of US and PCPAW was highly effective in reducing food-borne pathogens, surpassing single treatments in count reduction and minimizing cross-contamination. Furthermore, our study demonstrates that US-PCPAW effectively controls browning appearance without compromising sensory attributes. These findings suggest that PCPAW, as a novel disinfectant, can be a valuable addition to US to enhance the quality and safety of fresh-cut produce.
Subject(s)
Escherichia coli O157 , Water , Food Contamination/analysis , Food Microbiology , Food Handling/methods , Colony Count, Microbial , TechnologyABSTRACT
Raw camel milk is generally contaminated with varied microbiota, including antibiotic-resistant bacteria (ARB), that can act as a potential pathway for the spread of antibiotic resistance genes (ARGs). In this study, high-throughput quantitative PCR and 16S rRNA gene-based Illumine sequencing data were used to establish a comprehensive understanding of the antibiotic resistome and its relationship with the bacterial community in Bactrian camel milk from Xinjiang. A total of 136 ARGs and up to 1.33 × 108 total ARG copies per gram were identified, which predominantly encode resistance to ß-lactamas and multidrugs. The ARGs' profiles were mainly explained by interactions between the bacteria community and physicochemical indicators (77.9%). Network analysis suggested that most ARGs exhibited co-occurrence with Corynebacterium, Leuconostoc and MGEs. Overall, raw camel milk serves as a reservoir for ARGs, which may aggravate the spread of ARGs through vertical and horizontal gene transfer in the food chain.
ABSTRACT
For a long time, food spoilage posed a severe impairment on food safety and public health. Although chemical preservatives are commonly used to inhibit spoilage/ pathogenic microbial growth, the disadvantages of a single target, potential toxicity and high dose of use limit the better use of preservatives. In this research, the combination of natural preservatives: Natamycin (Nat), ε-polylysine (ε-PL), and Chitosan (CS) could achieve an excellent antimicrobial effect including bacteria and fungi, and reduce the usage of a single preservative. Compound preservatives could destroy microbial morphology and damage the integrity of the cell wall/membrane by leakage of protein and alkaline phosphatase (AKP). Besides, high-throughput sequencing revealed that compound preservatives could decrease microbial diversity and richness, especially, Pseudomonas, Acinetobacter, Fusarium, and Aspergillus. Therefore, the combination of 1/8 × MIC CS, 1/4 × MIC ε-PL, and 1/2 × MIC Nat can achieve an excellent antibacterial effect, providing new ideas for food preservation.
ABSTRACT
Polysaccharide-based gold nanomaterials have attracted great interest in biomedical fields such as cancer therapy and immunomodulation due to their prolonged residence time in vivo and enhanced immune response. This review aims to provide an up-to-date and comprehensive summary of polysaccharide-based Au NMs synthesis, including mechanisms, polysaccharide structure-effects, and anticancer activity. Firstly, research progress on the synthesis mechanism of polysaccharide-based Au NMs was addressed, which included three types based on the variety of polysaccharides and reaction environment: breaking of glycosidic bonds via Au (III) or base-mediated production of highly reduced intermediates, reduction of free hydroxyl groups in polysaccharide molecules, and reduction of free amino groups in polysaccharide molecules. Then, the potential effects of polysaccharide structure characteristics (molecular weight, composition of monosaccharides, functional groups, glycosidic bonds, and chain conformation) and reaction conditions (the reaction temperature, reaction time, pH, concentration of gold precursor and polysaccharides) on the size and shape of Au NMs were explored. Finally, the current status of polysaccharide-based Au NMs cancer therapy was summarized before reaching our conclusions and perspectives.
Subject(s)
Glycosides , Neoplasms , Humans , Gold/pharmacology , Immunomodulation , Polysaccharides/pharmacology , Neoplasms/drug therapyABSTRACT
Because of the multi-pathway antibacterial mechanisms of nanomaterials, they have received widespread attention in wound therapy. However, owing to the complexities of bacterial responses toward nanomaterials, antibacterial molecular mechanisms remain unclear, making it difficult to rationally design highly efficient antibacterial nanomaterials. Fortunately, molecular dynamics simulations and omics techniques have been used as effective methods to further investigate the action targets of nanomaterials. Therefore, the review comprehensively analyzes the antibacterial mechanisms of nanomaterials from the morphology-dependent antibacterial activity and physicochemical/optical properties-dependent antibacterial activity, which provided guidance for constructing excellently efficient and broad-spectrum antibacterial nanomaterials for wound therapy. More importantly, the main molecular action targets of nanomaterials from the membranes, DNA, energy metabolism pathways, oxidative stress defense systems, ribosomes, and biofilms are elaborated in detail. Furthermore, nanomaterials used in wound therapy are reviewed and discussed. Finally, future directions of nanomaterials from mechanisms to nanomedicine are further proposed.
ABSTRACT
In this study, an efficient, sensitive, and convenient magnetic solid-phase extraction method combined with ultra-high performance liquid chromatography-tandem mass spectrometry (MSPE-UHPLC-MS/MS) was developed for the simultaneous determination of 19 succinate dehydrogenase inhibitor fungicide residues in six different food matrices The synthesized tetraethylenepentamine magnetic graphene oxide nanocomposite showed the advantages of good dispersibility, large specific surface area (113.93 m2 /g) and large pore volume (0.25 cm3 /g), making it an ideal succinate dehydrogenase inhibitor pretreatment adsorbent. The MSPE-UHPLC-MS/MS method showed linearity in the range of 5.0-800.0 µg/kg, with a correlation coefficient (R2 ) > 0.99, and a limit of quantification of 5 µg/kg. The recovery of succinate dehydrogenase inhibitor fungicides was in the range of 71.2%-119.4%. The MSPE method is simple, rapid, and efficient, making it an ideal alternative to sample pretreatment in the determination of trace succinate dehydrogenase inhibitor fungicides in complex matrices.