ABSTRACT
PURPOSE: The purpose of this study was to evaluate the long-term incidence, risk factors, and the management of corneal melt following Boston type I keratoprosthesis (B-KPro I) implantation. METHODS: This is a retrospective observational case series. Data were collected regarding demographics, preoperative characteristics, incidence, and outcomes of corneal melt in 102 patients who underwent B-KPro I in the Chinese PLA General Hospital between 2011 and 2018, with a follow-up period ranging from 4 to 11 years. RESULTS: Chemical burn was the most common indication for B-KPro I (n = 56; 53.8%), followed by ocular trauma (n = 26; 25.0%). During the follow-up period (107 ± 25.7 months), corneal melt occurred in 60 cases among 37 eyes (35.6%), with an incidence of 20.2% at 1 year after surgery. Fourteen cases presented with recurrent corneal melt. Patients with multiple corneal allograft failures had a higher risk of corneal melt. Thermal burns, compared with alkali burns, significantly elevated the odds ratio (OR) of corneal melt (OR, 5.11; 95% confidence interval, 1.05-24.86; P = 0.043). CONCLUSIONS: Corneal melt significantly reduced the retention time of KPro ( P < 0.01), and its coexistence with other complications further shortened the retention time. A specific pattern of corneal melt occurrence was identified, with a peak incidence at 1 year postoperatively. Our findings suggest variations in the risk of corneal melt among different indications, with thermal burns carrying the highest OR. Moreover, each previous failed keratoplasty doubled the risk of corneal melt after B-KPro I.
Subject(s)
Corneal Diseases , Humans , Male , Female , Retrospective Studies , Middle Aged , Adult , Corneal Diseases/surgery , Incidence , Aged , Risk Factors , Cornea , Visual Acuity/physiology , China/epidemiology , Follow-Up Studies , Postoperative Complications , Artificial Organs , Hospitals, General , Prosthesis Implantation , Eye Burns/surgery , Young Adult , Prostheses and Implants , Adolescent , Hospitals, Military , East Asian PeopleABSTRACT
Vestibular compensation is a physiological response of the vestibular organs within the inner ear. This adaptation manifests during consistent exposure to acceleration or deceleration, with the vestibular organs incrementally adjusting to such changes. The molecular underpinnings of vestibular compensation remain to be fully elucidated, yet emerging studies implicate associations with neuroplasticity and signal transduction pathways. Throughout the compensation process, the vestibular sensory neurons maintain signal transmission to the central equilibrium system, facilitating adaptability through alterations in synaptic transmission and neuronal excitability. Notable molecular candidates implicated in this process include variations in ion channels and neurotransmitter profiles, as well as neuronal and synaptic plasticity, metabolic processes, and electrophysiological modifications. This study consolidates the current understanding of the molecular events in vestibular compensation, augments the existing research landscape, and evaluates contemporary therapeutic strategies. Furthermore, this review posits potential avenues for future research that could enhance our comprehension of vestibular compensation mechanisms.
ABSTRACT
The AlGaN-based deep ultraviolet light-emitting diode (DUV LED) has advantages of environmentally friendly materials, tunable emission wavelength, and easy miniaturization. However, an increase in Al composition leads to a decline in the lattice quality, thereby reducing the internal quantum efficiency (IQE). In addition, the light extraction efficiency (LEE) is limited due to the strong transverse magnetization polarization emission from the multiple quantum wells. Here, we designed the topological corner structure in AlGaN-MQWs, and the high electric field intensity in a tiny space at the corner results in an extremely high local density of optical states (LDOS), which could shorten the luminescence decay time of the emitter and increase the radiative rate by 26 times. Meanwhile, because the excited topological corner state resonance mode is a transverse-electric mode, enhancing only the transverse-electric luminescence without any gain for transverse-magnetic luminescence, thereby significantly improving the light extraction efficiency. Finally, according to theoretical calculations, the IQE could reach 68.75% at room temperature.
ABSTRACT
BACKGROUND: Natural orifice specimen extraction surgery (NOSES) is currently widely used in left-sided colorectal cancer. Some clinical comparative studies have been conducted, providing evidence of its safety and oncological benefits. However, these studies are typically characterized by small sample sizes and short postoperative follow-up periods. Consequently, in this research, the authors adopt the propensity score matching method to undertake a large-scale retrospective comparative study on NOSES colectomy for left-sided colorectal cancer, with the goal of further augmenting the body of evidence-based medical support for NOSES. METHODS: This retrospective study involved patients who underwent NOSES colectomy and conventional laparoscopic (CL) colectomy for left-sided colorectal cancer between January 2014 and April 2021. In the NOSES group, specimens were extracted through the anus with the help of a Cai tube (homemade invention: ZL201410168748.2). The patients were matched at a ratio of 1:1 according to age, sex, BMI, tumor diameter, tumor location (descending and splenic flexure colon/ sigmoid colon/ middle and upper rectum), tumor height from anal verge, ASA grade, previous abdominal surgery, clinical pathologic stage, preoperative CEA. After matching, 132 patients in the NOSES group and 132 patients in the CL group were eligible for analysis. RESULTS: Compared with CL group, NOSES group was associated with decreased postoperative maximum pain score (2.6±0.7 vs. 4.7±1.7, P=0.000), less additional analgesia required (6.8 vs. 34.8%, P=0.000), faster time to passage of flatus (2.3±0.6 days vs. 3.3±0.7 days, P=0.000), less wound infection (0.0 vs. 6.1%, P=0.007), and longer operative time (212.5±45.8 min vs. 178.0±43.4 min, P=0.000). No significant differences were observed in estimated blood loss, time to resume regular diet, postoperative hospital stay, conversion to open surgery or conventional minilaparotomy, total morbidity, readmission, mortality, pathologic outcomes, and Wexner incontinence score between groups. After a median follow-up of 63.0 months, the 5-year overall survival rates were 88.3 versus 85.0% (P=0.487), disease-free survival rates were 82.9 versus 83.6% (P=0.824), and the local recurrence rates were 4.4 versus 4.0% (P=0.667) in the NOSES and CL groups, respectively. CONCLUSIONS: This study suggests that NOSES colectomy using a Cai tube for left-sided colorectal cancer is a safe and feasible option with better cosmetic results, less pain, faster recovery of gastrointestinal function, and comparable long-term clinical and oncologic outcomes to CL colectomy.
Subject(s)
Colorectal Neoplasms , Laparoscopy , Humans , Retrospective Studies , Propensity Score , Laparoscopy/adverse effects , Laparoscopy/methods , Pain, Postoperative , Colorectal Neoplasms/surgery , Colectomy/adverse effects , Colectomy/methods , Treatment OutcomeABSTRACT
The wood industry faces challenges in producing eco-friendly, high-performance, and formaldehyde-free adhesives. In this study, carboxylated styrene-butadiene rubber (XSBR) was blended with polyamidoamine-epichlorohydrin (PAE) resin, and a controlled amount of CaCO3 powder was incorporated to create an adhesive with exceptional strength. The resulting three-layer plywood demonstrated remarkable dry and wet shear strengths of 3.09 and 2.36 MPa, respectively, and of 2.27 MPa after boiling water tests, comparable to that of phenolic resins. Additionally, the adhesive exhibited strong adhesion across various materials including glass, metal, etc. This exceptional performance was due to two primary factors: (1) the high-density chemical cross-linking reaction and the physical entanglement between XSBR and PAE; (2) the organic-inorganic hybrid involving metal ion complexation developed by CaCO3, which fostered molecular chain connections and enhanced the adhesive-material interface. These findings offer valuable references for further research in the field of wood adhesives.
ABSTRACT
During oil and gas well construction, lost circulation caused substantial nonoperation time and extra costs, and hydrogel, resilient and environmentally friendly, was one of the major types of material for lost circulation treatment. To migrate the weak bonding and hydrothermal degradation of conventional single network hydrogels, dual network (DN) hydrogel was prepared and immersed in solvents of polyethylene glycol (PEG), ethylene glycol, and glycerol. The swelling of DN gels at different temperatures was studied with water content and swelling rate tests, and the gel structural and morphology was characterized with attenuated total reflectance infrared spectroscopy (ATR-IR) and scanning electron microscopy test. Then, the compression test and fracture plugging performance test were conducted to study the strength of the gel. The results show that compared to those in ethylene glycol and glycerin, DN gel after immersion in PEG (DN-PEG) exhibits greater compression strength and better plugging performance even at high temperatures. The compression strength of DN-PEG was twice that of DN hydrogel before immersion, and its fracture plug breaking pressure can reach over 10.0 MPa. After undergoing hydrothermal treatment at 90 °C, the compression strength of the DN-PEG was nearly 20 times that of the DN hydrogel, and the fracture plug breaking pressure was still 2.81 MPa. According to ATR-IR spectroscopy, as the molecular weight of the solvent increases, more hydroxyl groups in the PEG have better ability to bind with hydrogen bonds, which greatly inhibits the swelling and polymer chain breakage, thereby reducing hydrothermal degradation in the strength of the dual-network hydrogel. Our work proposed an effective method to reduce the degradation of hydrogel in water at high temperature, and the prepared DN-PEG hydrogel was a promising material for lost circulation treatments in fractured formation.
ABSTRACT
Radiation-induced damage to the blood-brain barrier (BBB) is the recognized pathological basis of radiation-induced brain injury (RBI), a side effect of head and neck cancer treatments. There is currently a lack of therapeutic approaches for RBI due to the ambiguity of its underlying mechanisms. Therefore, it is essential to identify these mechanisms in order to prevent RBI or provide early interventions. One crucial factor contributing to BBB disruption is the radiation-induced activation of astrocytes and oversecretion of vascular endothelial growth factor (VEGF). Mechanistically, the PI3K-AKT pathway can inhibit cellular autophagy, leading to pathological cell aggregation. Moreover, it acts as an upstream pathway of VEGF. In this study, we observed the upregulation of the PI3K-AKT pathway in irradiated cultured astrocytes through bioinformatics analysis, we then validated these findings in animal brains and in vitro astrocytes following radiation exposure. Additionally, we also found the inhibition of autophagy and the oversecretion of VEGF in irradiated astrocytes. By inhibiting the PI3K-AKT pathway or promoting cellular autophagy, we observed a significant amelioration of the inhibitory effect on autophagy, leading to reductions in VEGF oversecretion and BBB disruption. In conclusion, our study suggests that radiation can inhibit autophagy and promote VEGF oversecretion by upregulating the PI3K-AKT pathway in astrocytes. Blocking the PI3K pathway can alleviate both of these effects, thereby mitigating damage to the BBB in patients undergoing radiation treatment.
Subject(s)
Astrocytes , Blood-Brain Barrier , Animals , Humans , Blood-Brain Barrier/pathology , Astrocytes/metabolism , Vascular Endothelial Growth Factor A/metabolism , Proto-Oncogene Proteins c-akt/metabolism , Phosphatidylinositol 3-Kinases/metabolism , AutophagyABSTRACT
Radiation-induced brain injury (RBI) poses a significant challenge in the context of radiotherapy for intracranial tumors, necessitating a comprehensive understanding of the cellular and molecular mechanisms involved. While prior investigations have underscored the role of astrocyte activation and excessive vascular endothelial growth factor production in microvascular damage associated with RBI, there remains a scarcity of studies examining the impact of radiation on astrocytes, particularly regarding organelles such as mitochondria. Thus, our study aimed to elucidate alterations in astrocyte and mitochondrial functionality following radiation exposure, with a specific focus on evaluating the potential ameliorative effects of translocator protein 18 kDa(TSPO) ligands. In this study, cultured astrocytes were subjected to X-ray irradiation, and their cellular states and mitochondrial functions were examined and compared to control cells. Our findings revealed that radiation-induced astrocytic hyperactivation, transforming them into the neurotoxic A1-type, concomitant with reduced cell proliferation. Additionally, radiation triggered mitochondrial hyperfunction, heightened the mitochondrial membrane potential, and increased oxidative metabolite production. However, following treatment with FGIN-1-27, a TSPO ligand, we observed a restoration of mitochondrial function and a reduction in oxidative metabolite production. Moreover, this intervention mitigated astrocyte hyperactivity, decreased the number of A1-type astrocytes, and restored cell proliferative capacity. In conclusion, our study has unveiled additional manifestations of radiation-induced astrocyte dysfunction and validated that TSPO ligands may serve as a promising therapeutic strategy to mitigate this dysfunction. It has potential clinical implications for the treatment of RBI.
Subject(s)
Astrocytes , Vascular Endothelial Growth Factor A , Astrocytes/metabolism , Vascular Endothelial Growth Factor A/metabolism , Mitochondria/metabolism , Indoleacetic Acids/metabolism , Indoleacetic Acids/pharmacology , Cells, Cultured , Carrier Proteins/metabolismABSTRACT
The nanocomposite gel system has been successfully applied as a water shutoff agent to enhance oil recovery (EOR) or for plugging to control lost circulation events. In this study, the silica/polyacrylamide nanocomposite was synthesized via in situ free radical polymerization of acrylamide (AM) monomers in the presence of silica nanoparticles. The composite was cross-linked with polyethylenimine to prepare a high-strength hydrogel. The viscosity test was conducted to determine the gelation time of the gel. Rheological measurements and sand pack breakthrough pressure tests were carried out to measure the gel strength. Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) and scanning electron microscopy (SEM) tests were adopted to characterize the structure and morphology of the gel. The results show that compared to polyacrylamide (PAM) gel, the gelation time of the nanocomposite gel will decrease with increasing gel elasticity modulus, and the breakthrough pressure of the nanocomposite gel is 29.82 MPa, which increased by 65%. As shown in the ATR-FTIR test, this can be attributed to the presence of multiple hydrogen bonds for the PAM molecule with both silica and quartz sand particles. In the composite gel, hydrogen bonding mainly forms between the O atoms of PAM and the H atom on the surface of silica, enhancing gel strength and elasticity modulus with more cross-linking density and less porosity. Moreover, H bonding between additional -NH2 of PAM and quartz sand particles helps improve gel plugging pressure. However, in the silica and PAM mixture gel, the H bonding of silica occupies -NH2 of PAM, which became unavailable to attach on the sand surface, reducing the breakthrough pressure by 30%, although it can enhance the rheological strength. This study suggests that in situ composite of silica in PAM can not only greatly improve gel rheological strength but also help maintain the strong adhesion of PAM molecules onto quartz sand, resulting in better plugging performance in the sand reservoir.
ABSTRACT
Virus-related infectious diseases are serious threats to humans, which makes virus detection of great importance. Traditional virus-detection methods usually suffer from low sensitivity and specificity, are time-consuming, have a high cost, etc. Recently, DNA biosensors based on DNA nanotechnology have shown great potential in virus detection. DNA nanotechnology, specifically DNA tiles and DNA aptamers, has achieved atomic precision in nanostructure construction. Exploiting the programmable nature of DNA nanostructures, researchers have developed DNA nanobiosensors that outperform traditional virus-detection methods. This paper reviews the history of DNA tiles and DNA aptamers, and it briefly describes the Baltimore classification of virology. Moreover, the advance of virus detection by using DNA nanobiosensors is discussed in detail and compared with traditional virus-detection methods. Finally, challenges faced by DNA nanobiosensors in virus detection are summarized, and a perspective on the future development of DNA nanobiosensors in virus detection is also provided.
Subject(s)
Aptamers, Nucleotide , Nanostructures , Humans , Nanotechnology , DNAABSTRACT
Background: The graft bending angle created by the graft and the tibial tunnel has inevitably occurred during the transtibial posterior cruciate ligament (PCL) reconstruction. However, few studies quantitively analyzed this angle. This study aimed to (I) explore the optimal tibial tunnel placement to maximize the graft bending angle in the PCL reconstruction; (II) reveal the effect of the tibial tunnel placement on the graft bending angle. Methods: This was an in-vitro surgical simulation study based on the three-dimensional (3D) computed tomography (CT). A total of 55 patients who took CT scanning for knee injuries were selected (April 2020 to January 2022) from the local hospital database for review. The 3D knee models were established on the Mimics software based on the knees' CT data. Using the Rhinoceros software to simulate the transtibial PCL reconstruction on the 3D CT knee model. The anteromedial and anterolateral tibial tunnel approaches were simulated with different tibial tunnel angle. The graft bending angle and tibial tunnel length (TTL) with different tibial tunnel angles were quantitively analyzed. Results: The graft bending angle in anterolateral approach with a 50° tibial tunnel angle was significantly greater than it in anteromedial approach with a 60° tibial tunnel angle (P<0.001). There was no difference of the graft bending angle between the anterolateral approach with a 40° tibial tunnel angle and the anteromedial approach with a 60° tibial tunnel angle (P>0.05). The graft bending angle showed a strong correlation with the tibial tunnel angle (for anteromedial approach: r=0.759, P<0.001; for anterolateral approach: r=0.702, P<0.001). The best-fit equation to calculate the graft bending angle based on the tibial tunnel angle was Y = 0.89*X + 59.05 in anteromedial tibial tunnel approach (r2=0.576), and was Y = 0.78*X + 80.21 anterolateral tibial tunnel approach (r2=0.493). Conclusions: The graft bending angle and TTL will significantly increase as the tibial tunnel angle becomes greater. Maximizing the tibial tunnel angle (50° tibial tunnel angle) in the anterolateral approach could provide the greatest graft bending angle in the PCL reconstruction. No matter how the tibial tunnel angle is changed in the anteromedial approach, using anterolateral approach might reduce the killer turn effect more effectively than using anteromedial approach.
ABSTRACT
As an important forestry biomass resource, rosin has a wide range of applications in medicine, adhesives, surfactants and other fields. Using natural dehydroabietic acid as a raw material, dehydroabietic acid-based phosphorus monoester (DPM) and diester (DPD) surfactants were designed and synthesized. The chemical structures and self-assembly properties were characterized by FT-IR, NMR and TEM, and the effects of pH on critical micelle concentration, γCMC, emulsifying properties, foam properties and micelle morphology were studied. The results showed that the CMC, γCMC value and aggregate morphology had certain pH responsiveness. The γCMC value under acidic conditions was smaller than γCMC under alkaline conditions, and the foaming performance and foam stability under acidic conditions were better than those under alkaline conditions. TEM micelle morphology studies have shown that DPM and DPD surfactants can self-assemble into rod-shaped and spherical micelle morphologies with a pH change in an aqueous solution. At the same pH, the foaming and emulsification properties of DPD were better than those of DPM. The best foaming and emulsification ability of DPD were 11.8 mL and 175 s, respectively. At the same time, the foaming ability of DPD is also affected by pH. DPD has excellent foaming properties in acidic conditions, but these disappeared in neutral conditions.
ABSTRACT
BACKGROUND: The role of laparoscopic-assisted natural orifice specimen extraction (LA-NOSE) colectomy in the treatment of left-sided colon cancer has not been well defined, and there remains confusion about how to conveniently exteriorize specimens through natural orifices. Therefore, we introduced a homemade invention, the Cai tube, to facilitate the extraction of specimens and compared the clinical outcomes of LA-NOSE with conventional laparoscopic (CL) colectomy for left-sided colon cancer. METHODS: From March 2015 to August 2017, patients with left-sided colon cancer were randomly divided into LA-NOSE and CL groups. Specimens were extracted through the anus with the help of a Cai tube (Patent Number: ZL201410168748.2) in the LA-NOSE group. The primary outcome measure was postoperative pain. Secondary outcomes were the duration of operation, postoperative recovery, surgical morbidity, pathological quality of the specimen, and long-term outcomes, including 3-year overall survival, disease-free survival, local recurrence, and overall recurrence. RESULTS: A total of 60 patients (30 per group) were recruited for this study. None of the patients required emergency conversion to conventional laparoscopic or open surgery during the operation. The postoperative maximum pain score was significantly lower in the LA-NOSE group (mean 2.5 vs. 5.1, P = 0.001), as was the additional analgesia requirement (mean 2/30 vs. 10/30, P = 0.021). Patients in the LA-NOSE group experienced a shorter first time to passage of flatus (mean 2.2 vs. 3.1 days, P = 0.026). All patients could control their defecation at 6 months after surgery. The comparison between the two groups showed no significant differences in the operative time, bleeding volume, postoperative hospital stay, surgical morbidity rates, number of lymph nodes harvested, or resection margin status. The mean follow-up was 48 months (range 7-59) and was similar in both groups. The results showed no differences in long-term outcomes between the two groups. CONCLUSION: In the treatment of left-sided colon cancer, compared with conventional laparoscopic colectomy, LA-NOSE colectomy using the Cai tube exhibited lower postoperative pain, shorter recovery of gastrointestinal function, and similar long-term outcomes. REGISTRATION NUMBER: ChiCTR-OOR-15007060 ( http://www.chictr.org.cn/ ).
Subject(s)
Colonic Neoplasms , Laparoscopy , Natural Orifice Endoscopic Surgery , Humans , Prospective Studies , Colonic Neoplasms/surgery , Pain, Postoperative/etiology , Colectomy/methods , Laparoscopy/methods , Treatment Outcome , Natural Orifice Endoscopic Surgery/methodsABSTRACT
Background: Patellar dislocation is attracting considerable research interest. Purpose: To assess studies on patellar dislocation using a scientometric method to better understand the current status of research and explore future study directions. Study Design: Scoping review. Methods: The Web of Science Core Collection database was selected to retrieve publications on patellar dislocation. Articles and reviews written in English with patellar dislocation as the main topic were included. Conference abstracts, notes, letters, expert opinions, and animal studies were excluded. A total of 4632 articles were identified in our initial search. In addition, Excel 2019, CiteSpace 6.1.R1, and VOSviewer 1.6.9 were used to analyze the h-index, the most highly cited publication, publication essentials, and research themes. Results: A total of 1485 articles were included in our analysis, with 36,608 citations and an h-index of 93. Overall, 1494 institutions and 195 journals were identified from these studies. The United States (n = 531) was the most productive country. The institution and journal with the largest number of articles were the Hospital for Special Surgery (n = 59) and Knee Surgery, Sports Traumatology, Arthroscopy (n = 212), respectively. The article "Scoring of Patellofemoral Disorders" by Kujala et al in 1993 was the most highly cited reference. The most commonly found terms used were patellar dislocation, patellar instability, medial patellofemoral ligament, knee, recurrent patellar dislocation, and soft tissue restraints. Four topics were identified after clustering analysis of key terms: risk factors, medial patellofemoral ligament reconstruction, patellar dislocation in skeletally immature patients, and lateral retinacular release. Conclusion: This scientometric review of articles on patellar dislocation summarized the current status of research (countries, institutions, and authors) and identified potential research directions.
ABSTRACT
Objective: To investigate the effects of vagus nerve stimulation(VNS) on hippocampal neuro-inflammatory and α7 nicotinic acetylcholine receptor (α7nAChR) expression in rats with intractable epilepsy (IE). Methods: Eighty adult male SD rats (SPF) were randomly divided into control group, model group, VNS group and MLA+VNS group. There were respectively 20 rats in the control group and MLA+VNS group, and because of model failure and animal death, 15 rats and 14 rats in the model group and VNS group were left respectively . Except the control group, the IE model was established in other groups. Only the vagus nerve was isolated in the control group without electrical stimulation; the model group did not take any intervention measures; the VNS group was treated for 4 weeks with VNS after the model was successful; the MLA(3.4 µg/µl, 5 µl) was given to the lateral ventricle in the MLA+VNS group, and then VNS for 4 weeks. Seizure frequency and duration in each group were observed and recorded. And then the rats were decapitated, the hippocampus were quickly separated and 10% tissue homogenate was prepared. The homogenate was centrifuged and the supernatant was extracted. The activities of AChE and ChAT in the supernatant were measured by spectrophotometry, and the levels of TNF-É, IL-6 and IL-1ß were detected by ELISA. The expression of α7nAChR in rat hippocampals was detected by Western blot. The expression of α7nAChR on microglias in rat hippocampals was assesed by double-labeled immunofluorescence. Results: â After VNS for 4 weeks, the frequency and duration of seizures in rats were decreased significantly, which were lower than those of the model group (P<0.01); After treated with MLA +VNS, the frequency and duration of seizures in rats were also reduced significantly, which were lower than those of the model group, but higher than those of the VNS group (P<0.01).â¡Compared with the control group, the expression of ChAT in the hippocampus of rats in the model group was decreased significantly and the expression of AChE was increased significantly (P<0.01); Compared with the model group, the expressions of ChAT in the hippocampus of rats in the VNS group and MLA+VNS group were increased significantly and the expressions of AChE were decreased significantly (P<0.01); Compared with the VNS group, in the hippocampus of rats in the MLA+VNS group, the expressions of ChAT and AChE had no significant changes (P>0.05). â¢Compared with the control group, the expressions of TNF-É, IL-6 and IL-1ß in the hippocampus of rats in the model group were increased significantly (P<0.01). Compared with the model group, the expressions of TNF-É, IL-6 and IL-1ß in the hippocampus of rats in the VNS group were decreased significantly (P<0.01). Compared with the VNS group, the expressions of TNF-É, IL-6 and IL-1ß in the hippocampus of rats in the MLA+VNS group were increased significantly(P<0.01). â£Compared with the control group, the expression of α7nAChR in hippocampus and microglia of rats in the model group was decreased significantly(P<0.01); Compared with the model group, the expression of α7nAChR in hippocampus and microglia of rats in the VNS group was up-regulated significantly (P<0.01); Compared with the VNS group, coexpression of α7nAChR on microglia wasreduced significantly in the MLA+VNS group (P<0.01). Conclusion: VNS has obvious therapeutic effect on IE rats, and its mechanism may be related to activating hippocampal microglia cholinergic anti-inflammatory pathway directly and inhibiting hippocampal neuro-inflammatory response.
Subject(s)
Drug Resistant Epilepsy , Vagus Nerve Stimulation , Rats , Male , Animals , alpha7 Nicotinic Acetylcholine Receptor , Tumor Necrosis Factor-alpha , Interleukin-6 , Rats, Sprague-Dawley , Hippocampus , Seizures/therapyABSTRACT
Purpose: To summarize and discuss the treatment and timing of glaucoma in patients with MICOF keratoprosthesis implantation to guide follow-up clinical treatment. Methods: The data of 39 eyes (39 patients) with the Moscow Eye Microsurgery Complex in Russia (MICOF) keratoprosthesis implantation in our hospital from 1 January 2002 to 31 December 2017 were collected, including patients with preexisting glaucoma and those who developed glaucoma de novo after MICOF. The sex, age, preoperative diagnosis, glaucoma surgery, keratoplasty, times of keratoplasty, best corrected visual acuity (BCVA) and final follow-up corrected visual acuity, visual field (VF) defect, and cup-to-disk ratio (CDR) were statistically analyzed. Results: Among 16 eyes with preexisting glaucoma, eight eyes underwent glaucoma surgery before MICOF, 4 eyes underwent glaucoma surgery combined with MICOF, and four eyes were managed medically. Among 23 eyes with de novo glaucoma, seven eyes were treated with surgery and 16 eyes were treated with medication only. A total of 9 (56.3%) eyes had corneal transplants with preexisting glaucoma, which was a higher percentage than that in the patients with de novo glaucoma (n = 5, 21.7%, P = 0.043). In both the preexisting glaucoma group and the de novo glaucoma group, the most common causes were alkali burns (56.3% of preexisting glaucoma and 43.5% of de novo glaucoma). There was no significant difference between the operation and initial visual acuity, postoperative visual acuity, BCVA, CDR, or VF defect. In the de novo glaucoma group, the final follow-up visual acuity of the glaucoma surgery group (1.56 ± 1.07) was worse than that of the mediation group (0.44 ± 0.53) (P < 0.017). Among the complications, the incidence of cornea melting in the patients treated with medications only (n=10) was significantly higher than that in the patients treated with glaucoma surgery (n = 0, P = 0.007), but there was no significant difference in the other complications. Conclusion: Among patients with MICOF, those patients who have undergone keratoplasty are more likely to develop glaucoma before surgery and glaucoma needs to be prevented. Surgical treatment can be selected according to the ocular surface condition in the patients with de novo glaucoma to reduce the occurrence of complications.
ABSTRACT
In recent years, flexible strain sensors have attracted considerable attention for the great application potential in the emerging fields of wearable devices, electronic skin and health monitoring. However, most of flexible strain sensors are nondegradable, and the produced numerous electronic wastes after uselessness will seriously threaten environment and ecology. Herein, we propose a new strategy to fabricate degradable and stretchable bio-based strain sensor using candle soot (CS) particles to construct conductive pathways and chitosan, potato starch (PS), and polyvinyl alcohol (PVA) to form stretchable matrix in the presence of Fe3+ ions. Owing to the formation of multiple hydrogen bonding constructed by chitosan, PS and PVA as well as coordination bonding by Fe3+ ions, the obtained strain sensor showed high elongation at break up to 200% and good fatigue resistance. Furthermore, the firm embedding of the CS particles into the surface of the stretchable matrix endowed the strain sensor with steady sensitivity (gauge factors of 1.49 at 0-60% strain and 2.71 at 60-100% strain), fast response (0.22 s) and good repeatability even after 1000 stretching-releasing cycles. In addition, the strain sensor was successfully applied to detect various human motions including finger and wrist bending, swallowing and pronunciation. Interestingly, after connecting to an Arduino microcontroller circuit with a Bluetooth module, the strain sensor was able to wirelessly detect real-time movements of index finger joints. Different from most previously reported sensors, the prepared strain sensor in this work was completely degraded in 2 wt% CH3COOH solution at 90 °C only within 10 min, thus effectively avoiding the production of electrical waste after the updating and upgrading of the sensors. The findings conceivably stand out as a new methodology to prepare environmental-friendly sensors in the field of flexible electronics, which is very beneficial for the sustainable development of environment and society.
Subject(s)
Chitosan , Wearable Electronic Devices , Humans , Ions , Motion , MovementABSTRACT
Highly sensitive ultraviolet (UV) photodetectors are highly desired for industrial and scientific applications. However, the responsivity of silicon photodiodes in the UV wavelength band is relatively low due to high-density Si/SiO2 interface states. In this paper, a coplanar avalanche photodiode (APD) was developed with a virtual guard ring design. When working in Geiger mode, it exhibited a strong UV response. The responsivity of 4 × 103 A/W (corresponding to a gain of 8 × 106) at 261 nm is measured under the incident power of 0.6 µW with an excess bias of 1.5 V. To the best of our knowledge, the maximum 3-dB bandwidth of 1.4 GHz is the first report ever for a Si APD when working in the Geiger mode in spite of the absence of an integrated CMOS read-out circuit.
ABSTRACT
Water pollution by heavy metal ions is a global concern due to detrimental effects on the ecological environment and human health. To solve the problem of the stability and recyclability of the traditional adsorbents, we proposed three-dimensional lamellar porous cellulose nanofiber/polyacrylamide composite aerogel with outstanding pollutants adsorption, easy regeneration, and multiple recycling. The aerogel adsorbent was prepared by a two-step method via facile in-situ physical/chemical double cross-linking and freeze-drying processes. The resulting aerogels showed good thermal stability, superior water stability and excellent adsorption properties, with a maximum Langmuir adsorption capacity for Cu(II) ions up to 240 mg g-1 due to the in-situ physical/chemical combination of anionic polyacrylamide and carbonylated cellulose nanofibers. The adsorption mechanism was the electrostatic attraction, chelating effect and complex formation driving forces for the fast and efficient adsorption of Cu(II) ions. The removal efficiency of the aerogels for Cu(II) remained above 80% after 10 adsorption/regeneration cycles, suggesting its outstanding recyclability. The proposed aerogel adsorbent shows noteworthy potential for the practical treatment of heavy metal ion wastewater.
Subject(s)
Metals, Heavy , Nanofibers , Water Pollutants, Chemical , Acrylic Resins , Adsorption , Cellulose/chemistry , Humans , Ions , Nanofibers/chemistry , Water Pollutants, Chemical/analysisABSTRACT
As a soybean oil extractive byproduct, high temperature defatted soy meal (HSM) presents great potential as a raw material for vegetable protein adhesives to replace aldehyde-based adhesives in the wood-based panel production. However, the application has been hindered by its poor cold-pressing adhesive performance. Herein, a novel HSM-based adhesive with excellent cold-pressing adhesion performance was developed based on mussel-inspired cation-π interactions. Highly reactive polyamidoamine-epichlorohydrin (PAE) and folic acid (FA) were added into an HSM-based adhesive to construct a dual-network system stabilized by strong cation-π interactions. The coacervate formed by PAE and FA served as an "internal adhesive" to bond HSM particles together, yielding high initial viscosity but easy sizing. As expected, the prepared adhesive exhibited an excellent cold-pressing bonding strength of 423 kPa, showing a 295% improvement compared to the soy protein (SP) adhesive. To improve the hot-pressing bonding strength of the adhesives, inorganic calcium carbonate (CaCO3) particles were introduced into the adhesive system to build an organic-inorganic hybrid adhesive system. The wet shear strength of the SPAE-FA-CaCO3 adhesive significantly improved from 0.63 MPa to 0.96 MPa, meeting the requirements for the practical application. This method provides a novel strategy to exploit high-performance vegetable protein-based wood adhesives.