Highly Stable Amide-Functionalized Zirconium-Organic Frameworks: Synthesis, Structure, and Methane Storage Capacity.

With the development of crystalline porous materials toward methane storage, the stability issue of metal-organic framework (MOF) materials has caused great concern despite high working capacity. Considering the high stability of zirconium-based MOFs and effective functions of amide groups toward gas adsorption, herein, a series of UiO-66 type of Zr-MOFs, namely, Zr-fcu-H/F/CH3/OH, were successfully designed and synthesized by virtue of amide-functionalized dicarboxylate ligands bearing distinct side groups (i.e., -H, -F, -CH3, and -OH) and ZrCl4 in the presence of trifluoroacetic acid as the modulator. Single-crystal X-ray diffraction and topology analyses reveal that these compounds are archetypal fcu MOFs encompassing octahedral and tetrahedral cages, respectively. The N2 sorption isotherms and acid-base stability tests demonstrate that the materials possess not only relatively high surface areas, pore volumes, and appropriate pore sizes but also great hydrolytic stabilities ranging pH = 3-11. Furthermore, the volumetric methane storage working capacities of Zr-fcu-H, Zr-fcu-F, Zr-fcu-CH3, and Zr-fcu-OH at 298/273 K and 80 bar are 187/217, 175/193, 167/187, and 154/171 cm3 (STP) cm-3, respectively, which indicate that the zirconium-based crystalline porous materials are capable of storing relatively high amounts of methane.

Darinaparsin (ZIO-101) enhances the sensitivity of small-cell lung cancer to PARP inhibitors.

Small-cell lung cancer (SCLC) is an aggressive high-grade neuroendocrine carcinoma of the lung associated with early metastasis and an exceptionally poor prognosis. Little progress has been made in developing efficacious targeted therapy for this recalcitrant disease. Herein, we showed that H3.3, encoded by two genes (H3F3A and H3F3B), was prominently overexpressed in SCLC. Darinaparsin (ZIO-101), a derivative of arsenic trioxide, dose- and time-dependently inhibited the viability of SCLC cells in an H3.3-dependent manner. More importantly, ZIO-101 treatment resulted in substantial accumulation of H3.3 and PARP1 besides induction of G2/M cell cycle arrest and apoptosis in SCLC cells. Through integrative analysis of the RNA-seq data from Cancer Cell Line Encyclopedia dataset, JNCI and Genomics of Drug Sensitivity in Cancer 2 datasets, we found that H3F3A expression was negatively correlated with the IC50 values of PARP inhibitors (PARPi). Furthermore, co-targeting H3.3 and PARP1 by ZIO-101 and BMN673/olaparib achieved synergistic growth inhibition against SCLC in vitro and in vivo. In conclusion, it is feasible to target H3.3 by ZIO-101 to potentiate the response rate of PARPi in SCLC patients.

Desolvation-Degree-Induced Structural Dynamics in a Rigid Cerium-Organic Framework Exhibiting Tandem Purification of Ethylene from Acetylene and Ethane.

Due to the industrial requirements for high production and high quality of ethylene, efficient purification of ethylene from acetylene and ethane is of prime importance but challenging. Dynamic metal-organic frameworks (MOFs) have demonstrated intriguing structural dynamics and diverse applications recently. Among them, although a few flexible ones have exhibited interesting ethylene purification capability, rigid ones were yet barely investigated for such purpose. In this regard, a cerium(III)-based MOF was solvothermally synthesized, which is rigid and assembled from rod molecular building blocks associated with coordinative N,N-dimethylformamide (DMF) molecules. After liberating different degrees of DMF ligands via heating under vacuum or acetone exchange, both partially desolvated compounds of Ce-MOF-1 and Ce-MOF-2 were concertedly isolated in a fashion of single-crystal to single-crystal transformation. Although both newly generated materials crystallize in the same space group, they exhibit dissimilar unit cell parameters and slightly distinct ultramicropore sizes and pore microenvironments, thanks to the discrepancy in the desolvation degree. Consequently, Ce-MOF-1 and Ce-MOF-2 individually demonstrate C2H2- and C2H6-selective adsorption behavior, resulting in the potential tandem separation of C2H4 from C2H2 and C2H6 mixtures. The above results were successfully supported by not only single gas adsorption isotherms but also grand canonical Monte Carlo (GCMC) calculation studies and dynamic breakthrough experiments. The present work may pave the way for rigid MOFs aiming at advancing applications via solid-state structural dynamics.

Tuning Open Metal Site-Free ncb Type of Metal-Organic Frameworks for Simultaneously High Gravimetric and Volumetric Methane Storage Working Capacities.

The design and synthesis of a single metal-organic framework (MOF) material with simultaneously high gravimetric and volumetric methane storage working capacities are still a great challenge. The open metal site (OMS) in MOFs is generally regarded as an advantage to enhance host-guest affinity. However, it is detrimental to the methane storage working capacity to some extent due to the resulting high low-pressure uptake. Moreover, the reported methane storage MOFs are predominately focusing on edge-transitive or low-connected mixed-linker networks. In contrast, high-connected mixed-linker MOFs have been less investigated for methane storage. Herein, three isoreticular nine-connected trinuclear iron-based Fe-ncb-MOFs without OMSs have been judiciously designed and successfully constructed by means of the mixed-linker approach associated with the fixing amide-functionalized pyridyl-carboxylate ligand LP (4-(pyridin-4-ylcarbamoyl)benzoate) and three differing sized dicarboxylate ligands. High-pressure methane adsorption measurements show that, with the isoreticular extension from BDC (1,4-benzenedicarboxylate) to BPDC (4,4'-biphenyldicarboxylate) and ABDC (azobenzene-4,4'-dicarboxylate), three Fe-ncb-MOFs exhibit gradually increasing not only gravimetric but also volumetric storage capacities because of their balancing gravimetric surface area and volumetric surface area, hierarchical pore system, and modest CH4 heats of adsorption. Among them, the Fe-ncb-ABDC demonstrates a rare combination of simultaneously high gravimetric and volumetric CH4 storage working capacities of 0.302/0.37 g g-1 and 196/240 cm3 (STP) cm-3 at 298/273 K and between 80 and 5 bar, respectively, which outperform the 8-c Fe-8T18-ABDC assembled from a shorter pyridyl-carboxylate ligand IN (isonicotinate) and ABDC, due to its limited pore volume, the presence of OMSs, and more confined pore spaces, and place Fe-ncb-ABDC among the best performing MOFs.

New Reticular Chemistry of the Rod Secondary Building Unit: Synthesis, Structure, and Natural Gas Storage of a Series of Three-Way Rod Amide-Functionalized Metal-Organic Frameworks.

Reticular chemistry and methane storage materials have been predominately focused on finite metal-cluster-based metal-organic frameworks (MOFs). In contrast, MOFs constructed from infinite rod secondary building units (SBUs), i.e., rod MOFs, are less developed, and the existing ones are typically built from simple one-way helical, zigzag, or (mixed)polyhedron SBUs. Herein, inspired by a recent unveiled structure of Zn6(H2O)3(BTP)4 and by means of an amide-functionalized preliminary single tricarboxylate, a subsequent mixed tricarboxylate, and dicarboxylate linkers, an intricate three-way rod MOF and the next three isoreticular three-way rod MOFs have been successfully realized, namely, 3W-ROD-1 and 3W-ROD-2-X (X = -OH, -F, and -CH3), respectively. The structural analyses disclosed that the four compounds were constructed from unprecedented three-way invariant nonintersecting trigonal rod-packing SBUs cross-linked via the noncovalent-interaction-driven self-assembly of pseudo hexacarboxylates with the original tricarboxylate or different functional ditopic linkers, resulting in cage-like pore geometries accessible via ultramicroporous apertures concomitant with the complex topology transitivity, namely, 18 42 and 18 44. Sorption studies show that the apparent surface areas of these materials are among the most highly porous materials for rod MOFs. Due to the presence of favorable pocket sites created by X, ketone, and proximal amide groups as revealed by Monte Carlo molecular dynamics (MCMD) computational calculations, the MOFs exhibit impressive methane storage working capacities, outperforming the well-known rod Ni-MOF-74 and representing the highest values among rigid rod MOFs.

Ligand-Conformer-Induced Formation of Zirconium-Organic Framework for Methane Storage and MTO Product Separation.

In pursuit of novel adsorbents with efficient adsorptive gas storage and separation capabilities remains highly desired and challenging. Although the documented zirconium-tricarboxylate-based metal-organic frameworks (MOFs) have displayed a variety of topologies encompassing underlying and geometry mismatch ones, the employed organic linkers are exclusively rigid and poorly presenting one type of conformation in the resultant structures. Herein, a used and semirigid tricarboxylate ligand of H3 TATAB was judiciously selected to isolate a zirconium-based spe-MOF after the preliminary discovery of srl-MOF. Single-crystal X-ray diffraction reveals that the fully deprotonated TATAB linker in spe-MOF exhibits two distinct conformers, concomitant with popular Oh and rare S6 symmetrical Zr6 molecular building blocks, generating an unprecedented (3,3,12,12)-c nondefault topology. Specifically, the spe-MOF exhibits structurally higher complexity, hierarchical micropores, open metal sites free and rich electronegative groups on the pore surfaces, leading to relatively high methane storage capacity without considering the missing-linker defects and efficient MTO product separation performance.

High-throughput determination of fungicides in grapes using thin-film microextraction coupled with liquid chromatography-tandem mass spectrometry.

A high-throughput and environmentally friendly method based on 96-well plate thin-film microextraction was established to determine 14 fungicides in grapes and grape juice using liquid chromatography-tandem mass spectrometry. The thin-film microextraction optimized method consisted of 60 min of extraction at pH 6.0 with the addition of sodium chloride (2-5%). Acetonitrile/water in the ratio of 8:2 was used for desorption analytes for 60 min. Evaluation of different extractive phases showed that polyacrylonitrile-polystyrene-divinylbenzene was the optimum coating. The linearity of the method was good in the range of 0.01-0.5 µg/mL for 14 fungicides with determination coefficients (R2 ) from 0.990 to 0.999, which indicated good linearity for both the grape juice and grape matrixes. The limit of detection was in the range of 0.002-0.01 µg/mL. The limit of quantitation was in the range of 0.01 mg/kg according to the minimum fortified level. The average absolute recoveries of the 14 fungicides ranged from 75.0 to 118.3%. The intraday relative standard deviation (n = 4) and interday relative standard deviation (n = 4) were 5.6-13.0% and 1.6-6.4%, respectively. This study showed that this method can be used for analyzing 96 samples in parallel, and the sample preparation time was approximately 2.0 min per sample. In addition, this approach offers a green and low-cost sample pretreatment technique for future analyses.

Syntheses, Structures and Sorption Properties of Three Isoreticular Trinuclear Indium-Based Amide-Functionalized Metal-Organic Frameworks.

Amide-functionalized metal-organic frameworks (AFMOFs) as a subclass of MOF materials have received great interest recently because of their intriguing structures and diverse potential applications. In this work, solvothermal reactions between indium nitrate and two mixed-linkers afforded two new isoreticular 8-connected trinuclear indium-based AFMOFs of [(In3 O)(OH)(L2)2 (IN)2 ]⋅(solv)x (2-In) and [(In3 O)(OH)(L2)2 (AIN)2 ]⋅(solv)x (NH2 -2-In) (H2 L2=4,4'-(carbonylimino)dibenzoic acid and HIN=isonicotinic acid or HAIN=3-aminoisonicotinic acid), respectively. Moreover, by means of reticular chemistry, an extended network of [(In3 O)(OH)(L3)2 (PB)2 ]⋅(solv)x (3-In) (H2 L3=4,4'-(terephthaloylbis(azanediyl))dibenzoic acid, HPB=4-(4-pyridyl)benzoic acid) was also successfully realized after prolongation of the former dicarboxylate linker and HIN, resulting in a truly 8-connected isoreticular AFMOF platform. These frameworks were structurally determined by single-crystal X-ray diffraction (SCXRD). Sorption studies further demonstrate that 2-In and NH2 -2-In exhibit not only high surface areas and pore volumes but also relatively high carbon capture capabilities (the CO2 uptakes reach 60.0 and 75.5 cm3 g-1 at 298 K and 760 torr, respectively) due to the presences of amide and/or amine functional groups. The selectivity of CO2 /N2 and CO2 /CH4 calculated by IAST are 10.18 and 12.43, 4.20 and 4.23 for 2-In and NH2 -2-In, respectively, which were additionally evaluated by mixed-gases dynamic breakthrough experiments. In addition, high-pressure gas sorption measurements show that both materials could take up moderate amounts of natural gas.

Expression, purification, crystallization and preliminary X-ray diffraction analysis of swine leukocyte antigen 2 complexed with a CTL epitope AS64 derived from Asia1 serotype of foot-and-mouth disease virus.

BACKGROUND: Currently, the structural characteristics of the swine major histocompatibility complex (MHC) class I molecule, also named swine leukocyte antigen class I (SLA-I) molecule need to be further clarified. RESULTS: A complex of SLA-I constituted by an SLA-2*HB01 molecule with swine ß2-microglobulin and a cytotoxic T lymphocyte (CTL) epitope FMDV-AS64 (ALLRSATYY) derived from VP1 protein (residues 64-72) of Asia 1 serotype of foot-and-mouth disease virus (FMDV) was expressed, refolded, purified and crystallized. By preliminary X-ray diffraction analysis, it was shown that the diffraction resolution of the crystal was 2.4 Å and the space group belonged to P212121 with unit cell parameters a = 48.37, b = 97.75, c = 166.163 Å. CONCLUSION: This research will be in favor of illuminating the structural characteristics of an SLA-2 molecule associated with a CTL epitope derived from Asia1 serotype of FMDV.

Purification, crystallization and preliminary X-ray crystallographic studies of swine MHC class I complexed with an FMDV CTL epitope Hu64.

Up to now, no crystal structure of swine leukocyte antigen 2 (SLA-2) molecules was reported. In order to elucidate the structure of SLA-2 and to study the cytotoxic T lymphocyte (CTL) epitopes derived from foot-and-mouth disease virus (FMDV), a complex of swine major histocompatibility complex (MHC) class I molecule (SLA-2 haplotype, Hebao allele) with swine ß2-microglobulin and the CTL epitope FMDV-Hu64 (ALLRTATYY) derived from O serotype of FMDV VP1 protein (residues 64-72) was refolded and crystallized. The crystal, which belonged to space group P212121, diffracted to 2.5 Šresolution and had unit cell parameters a = 48.37, b = 97.75, c = 166.163 Å. These results will help to determine the first structure of a SLA-2 molecule in the context of an FMDV CTL epitope.

Identification of two novel foot-and-mouth disease virus cytotoxic T lymphocyte epitopes that can bind six SLA-I proteins.

Currently available vaccines from inactivated foot-and-mouth disease virus (FMDV) only protect animals by inducing neutralizing antibodies. A vaccine that contains cytotoxic T lymphocytes (CTL) epitopes to induce strong CTL responses might protect animals more effectively. Herein, we used swine leukocyte antigen class I (SLAI) proteins derived from six different strains of domestic pigs to screen and identify shared FMDV CTL epitopes. Four potential FMDV CTL epitopes (Q01, Q02, AS3, and QA4) were confirmed by mass spectrometry. We also determined the antigenicity of these epitopes to elicit cell-mediated immunoresponse by the ELISPOT and CTL assays. Among the four peptides, Q01 and QA4 were found to bind all six SLA-I proteins with strong affinity and elicit significant activity of CTL (P < 0.01). We conclude that Q01 and QA4 peptides are novel shared epitopes that can be recognized by all six SLA-I molecules on representative CTLs.

Combination effect of ionic liquid components on the structure and properties in 1,4-benzenedicarboxylate based zinc metal-organic frameworks.

Two types of 2D [RMI]2[Zn3(BDC)3X2] (Type A) and 3D [Zn(BDC)(H2O)] (Type B) (H2BDC = 1,4-benzenedicarboxylate acid) compounds were synthesized with three kinds of 1-alkyl-3-methyl imidazolium halide ([RMI]X) ionic liquids. Type A is the primary structure model showing a (3,6) network. Type B can be obtained from [BMI]Cl, [AMI]Cl and [AMI]Br media, showing a 4,4-connected {4(2)·8(4)} network. The structure, TG, and fluorescence analyses demonstrate the combination effect of the RMI(+) templating effect and X(-) controlling the structure types. The boundary between Types A and B is from [PMI]Cl, via [BMI]Br, to [AMI]I as the reaction media. The decomposition temperatures of the compounds in Type A decrease with increased RMI(+), while X(-) anions exert the influence that compounds containing Br(-) supply the highest thermal stability. Similarly, with increased RMI(+), or X = I(-), the compounds show red shifts compared to the emissions of the ligand.