Very Early Corona Treatment-Mediated Artificial Incubation of Silkworm Eggs and Germline Transformation of Diapause Silkworm Strains.

Diapause is an important biological characteristic for many insect species to adapt to adverse environmental conditions and maintain the continuity of the race. Compared with the traditional hydrochloric acid or/and cold storage treatment methods, the artificial corona incubation technology of silkworm (Bombyx mori) eggs has many advantages including, the absence of pollution, easy operation and safety. However, this technology has not yet been applied in sericulture. In this study, we developed a novel artificial corona instrument to successfully disrupt the diapause of newly laid and refrigerated eggs from various Chinese and Japanese lineage silkworm strains. Subsequently, we invented a very early corona treatment (VECT) strategy to prevent the diapause of newly laid silkworm eggs within 4 h of oviposition. The hatching rates of the larvae were more than 95% in all diapause silkworm strains, which was comparable to the effect of the traditional HCl treatment strategy. In addition, we developed a combination strategy of VECT and pre-blastoderm microinjection and successfully created transgenic silkworms in various diapause strains. The results of the current study can aid in improving the corona artificial incubation technology and promote its application in sericulture.

Clean production of porous-Al(OH)3 from fly ash.

Fly ash is one of the largest solid waste and causes serious environment problems. Extraction of Al(OH)3 from fly ash is beneficial to environment and economy. We developed a clean electrolysis method to generate hydroxyl groups in situ to extract Al(OH)3 from fly ash leachate without adding chemicals or using expensive membranes, avoiding the introduction of new impurities, secondary pollutants generation, and membrane limitations. Batch experiments yielded porous electrolytic products with BET surface areas from 11.7610 to 25.5267 m2/g, pore volumes from 0.1935 to 0.1643 cm3/g and pore sizes from 65.7960 to 25.7434 nm. The composition of the electrolytic products was 86.43 wt% Al(OH)3, 9.00 wt% SO3, 1.67 wt% Fe(OH)3, and 0.29 wt% Ca(OH)2. The current efficiency was 90.51 % under optimized conditions of c (Al3+) = 0.1 M, t =2 h, and J = 750 A/m2. Mean particle size was from 24.1-98.1 µm. Impurities mainly affected the composition of the electrolytic products. The OH- generated by H2O reduction reacted with Al3+, Fe3+, and Ca2+ to generate a hydroxide. Fe3+ preceded Ca2+ into the hydroxide. H2 released continuously from H2O reduction, resulting in a porous hydroxide. The wastewater was reused as a leaching reagent to promote zero-pollution discharge.

Correction: Characterization and Functional Analysis of 4-Coumarate:CoA Ligase Genes in Mulberry.

[This corrects the article DOI: 10.1371/journal.pone.0155814.].

Characterization and Functional Analysis of 4-Coumarate:CoA Ligase Genes in Mul-berry.

A small, multigene family encodes 4-coumarate:CoA ligases (4CLs) that catalyze the ligation of CoA to hydroxycinnamic acids, a branch point directing metabolites to flavonoid or monolignol pathways. In this study, we characterized four 4CL genes from M. notabilis Genome Database, and cloned four Ma4CL genes from M. atropurpurea cv. Jialing No.40. A tissue-specific expression analysis indicated that Ma4CL3 was expressed at higher levels than the other genes, and that Ma4CL3 was strongly expressed in root bark, stem bark, and old leaves. Additionally, the expression pattern of Ma4CL3 was similar to the trend of the total flavonoid content throughout fruit development. A phylogenetic analysis suggested that Mn4CL1, Mn4CL2, and Mn4CL4 belong to class I 4CLs, and Mn4CL3 belongs to class II 4CLs. Ma4CL genes responded differently to a series of stresses. Ma4CL3 expression was higher than that of the other Ma4CL genes following wounding, salicylic acid, and ultraviolet treatments. An in vitro enzyme assay indicated that 4-coumarate acid was the best substrate among cinnamic acid, 4-coumarate acid, and caffeate acid, but no catalytic activity to sinapate acid and ferulate acid. The results of subcellular localization experiments showed that Ma4CL3 localized to the cytomembrane, where it activated transcription. We used different vectors and strategies to fuse Ma4CL3 with stilbene synthase (STS) to construct four Ma4CL-MaSTS co-expression systems to generate resveratrol. The results indicated that only a transcriptional fusion vector, pET-Ma4CL3-T-MaSTS, which utilized a T7 promoter and lac operator for the expression of MaSTS, could synthesize resveratrol.

[Introduction trial of medicine mulberry (Morus nigra) in Chongqing].

Medicine mulberry (Morus nigra) mainly distributed in southern areas of Xinjiang Uighur Autonomous Region and introduced by grafting, is a unique Morus species, whose plant number is little. As a traditional herbal medicine, medicine mulberry with high levels of secondary metabolites has important values of scientific research and utilization. In order to solve the introduction problems for medicine mulberry, we have established its rapid propagation system through tissue culture since 2011. The shoots of medicine mulberry through tissue culture were transplanted into the field to carry out an introduction experiment. Here, we firstly reported that the growth status and pest and disease occurrence of medicine mulberry in the field of Chongqing and found that the medicine mulberry through tissue culture had well-developed root system, it showed better growth than medicine mulberry by grafting technique, and Pseudodendrothrips moil was a major pest of medicine mulberry. The introduction technique for medicine mulberry established successfully in this study could lay the foundation for large-scale cultivation and high efficiency utilization of medicine mulberry.

Mulberry Transcription Factor MnDREB4A Confers Tolerance to Multiple Abiotic Stresses in Transgenic Tobacco.

The dehydration responsive element binding (DREB) transcription factors have been reported to be involved in stress responses. Most studies have focused on DREB genes in subgroups A-1 and A-2 in herbaceous plants, but there have been few reports on the functions of DREBs from the A-3-A-6 subgroups and in woody plants. Moreover, mulberry trees are ecologically and economically important perennial woody plants, but there has been little research on its stress physiology, biochemistry and molecular biology. In this study, a DREB gene from the mulberry tree, designated as MnDREB4A, classified into the A-4 subgroup by our previous study, was selected for further characterization. Our results showed that the MnDREB4A protein was localized to the nucleus where it activated transcription. The promoter of MnDREB4A can direct prominent expression downstream of the ß-glucuronidase (GUS) gene under heat, cold, drought and salt stress, and GUS staining was deepest after 12 h of stress treatment. The MnDREB4A-overexpression transgenic tobacco showed the improved growth phenotype under untreated conditions, such as greener leaves, longer roots, and lower water loss and senescence rates. Overexpression of MnDREB4A in tobacco can significantly enhance tolerance to heat, cold, drought, and salt stresses in transgenic plants. The leaf discs and seedlings of transgenic plants reduced leaf wilting and senescence rates compared to the wild type plants under the different stress conditions. Further investigation showed that transgenic plants also had higher water contents and proline contents, and lower malondialdehyde contents under untreated condition and stress conditions. Our results indicate that the MnDREB4A protein plays an important role in plant stress tolerance.

Characterization and expression profiles of MaACS and MaACO genes from mulberry (Morus alba L.).

1-Aminocyclopropane-1-carboxylic acid synthase (ACS) and 1-aminocyclopropane-1-carboxylic acid oxidase (ACO) are encoded by multigene families and are involved in fruit ripening by catalyzing the production of ethylene throughout the development of fruit. However, there are no reports on ACS or ACO genes in mulberry, partly because of the limited molecular research background. In this study, we have obtained five ACS gene sequences and two ACO gene sequences from Morus Genome Database. Sequence alignment and phylogenetic analysis of MaACO1 and MaACO2 showed that their amino acids are conserved compared with ACO proteins from other species. MaACS1 and MaACS2 are type I, MaACS3 and MaACS4 are type II, and MaACS5 is type III, with different C-terminal sequences. Quantitative reverse transcriptase polymerase chain reaction (qRT-PCR) expression analysis showed that the transcripts of MaACS genes were strongly expressed in fruit, and more weakly in other tissues. The expression of MaACO1 and MaACO2 showed different patterns in various mulberry tissues. MaACS and MaACO genes demonstrated two patterns throughout the development of mulberry fruit, and both of them were strongly up-regulated by abscisic acid (ABA) and ethephon.

The molecular structures of major ampullate silk proteins of the wasp spider, Argiope bruennichi: a second blueprint for synthesizing de novo silk.

The dragline silk of orb-weaving spiders possesses extremely high tensile strength and elasticity. To date, full-length sequences of only two genes encoding major ampullate silk protein (MaSp) in Latrodectus hesperus have been determined. In order to further understand this gene family, we utilized in this study a variety of strategies to isolate full-length MaSp1 and MaSp2 cDNAs in the wasp spider Argiope bruennichi. A. bruennichi MaSp1 and MaSp2 are primarily composed of remarkably homogeneous ensemble repeats containing several complex motifs, and both have highly conserved C-termini and N-termini. Two novel amino acid motifs, GGF and SGR, were found in MaSp1 and MaSp2, respectively. Amino acid composition analysis of silk, luminal contents and predicted sequences indicates that MaSp1 and MaSp2 are two major components of major ampullate glands and that the ratio of MaSp1 to MaSp2 is approximately 3:2 in dragline silk. Furthermore, both the MaSp1:MaSp2 ratio and the conserved termini are closely linked with the production of high quality synthetic fibers. Our results make an important contribution to our understanding of major ampullate silk protein structure and provide a second blueprint for creating new composite silk which mimics natural spider dragline silk.

FLP recombinase-mediated site-specific recombination in silkworm, Bombyx mori.

A comprehensive understanding of gene function and the production of site-specific genetically modified mutants are two major goals of genetic engineering in the post-genomic era. Although site-specific recombination systems have been powerful tools for genome manipulation of many organisms, they have not yet been established for use in the manipulation of the silkworm Bombyx mori genome. In this study, we achieved site-specific excision of a target gene at predefined chromosomal sites in the silkworm using a FLP/FRT site-specific recombination system. We first constructed two stable transgenic target silkworm strains that both contain a single copy of the transgene construct comprising a target gene expression cassette flanked by FRT sites. Using pre-blastoderm microinjection of a FLP recombinase helper expression vector, 32 G3 site-specific recombinant transgenic individuals were isolated from five of 143 broods. The average frequency of FLP recombinase-mediated site-specific excision in the two target strains genome was approximately 3.5%. This study shows that it is feasible to achieve site-specific recombination in silkworms using the FLP/FRT system. We conclude that the FLP/FRT system is a useful tool for genome manipulation in the silkworm. Furthermore, this is the first reported use of the FLP/FRT system for the genetic manipulation of a lepidopteran genome and thus provides a useful reference for the establishment of genome manipulation technologies in other lepidopteran species.

[Progress in Cre/lox site-specific recombination system in higher eukaryotes].

Cre/lox system derived from P1 bacteriaphage can quickly and effectively achieve gene insertion, deletion, replacement, and inversion by means of site-specific recombination. As one of the most important tools for gene targeting at present, Cre/lox system has been widely used in Arabidopsis thaliana, Oryza sativa L., Mus musculus, Drosophila melanogaster, Danio rerio, and other higher eukaryotic organisms. This review roundly described the basic profile of Cre/lox system, and its application in higher eukaryotes. In addition, we also discussed the main problems and developmental trend of the Cre/lox system in this review, which can be a good reference for using Cre/lox system to realize the gene manipulations of the different high eukaryotic organisms.

Novel molecular and mechanical properties of egg case silk from wasp spider, Argiope bruennichi.

Araneoid spiders use specialized abdominal glands to produce up to seven different protein-based silks/glues that have various mechanical properties. To date, the fibroin sequences encoding egg case fibers have not been fully determined. To gain further understanding of a recently reported spider silk protein gene family, several novel strategies were utilized in this study to isolate two full-length cDNAs of egg case silk proteins, cylindrical silk protein 1 (CySp1, 9.1 kb) and cylindrical silk protein 2 (CySp2, 9.8 kb), from the wasp spider, Argiope bruennichi. Northern blotting analysis demonstrated that CySp1 and CySp2 are selectively expressed in the cylindrical glands. The amino acid composition of raw egg case silk was closely consistent with the deduced amino acid composition based on the sequences of CySp1 and CySp2, which supports the assertion that CySp1 and CySp2 represent two major components of egg case silk. CySp1 and CySp2 are primarily composed of remarkable homogeneous assemble repeats that are 180 residues in length and consist of several complex subrepeats, and they contain highly homologous C-termini and markedly different N-termini. Our results suggest a possible link between CySp1 and CySp2. In addition, comparisons of stress/strain curves for dragline and egg case silk from Argiope bruennichi showed obvious differences in ultimate strength and extensibility, and similarities in toughness.

[Study on location of QTLs controlling cocoon traits in silkworm].

On the basis of the molecular linkage map, mapmaker software QTLMapper 2.0 was used to analyze the QTLs effect of the whole cocoon weight,cocoon shell weight, ratio of cocoon shell and pupa weight of domestic silkworm. For these four cocoon quantitative traits, 7, 6, 2 and 8 effective QTLs were detected and mapped to 7, 5, 2 and 7 linkage groups, respectively. Complicated epistatic effects were found involved in the genetic variation of the whole cocoon weight and cocoon shell weight. For the whole cocoon weight, there were three pairs of QTLs with significant additive by additive interactions, in which, one pair had significant additive by dominance and dominance by dominance interactions. Whereas significant dominance were detected for three QTLs and significant additive effects one QTL had. For the cocoon shell weight, significant genetic effects, including epistatic effects were found for one pair of QTLs, significant dominance by dominance interaction for another pair of QTLs; one QTL had significant dominance and another QTL had additive by additive interaction. The ratio of cocoon shell and the pupa weight were controlled mainly by additive or dominance effects. No interaction between QTL was found for the ratio of cocoon. Most QTLs, associated with the pupa weight, had negative dominance effects. Only significant additive by additive interaction was found between one pair of QTLs. The 2nd, 3rd, 4th, 11th, 13th, 24th, 34th, 37th, and 40th linkage groups are the common chromosomal regions harboring QTLs of two or more cocoon quantitative traits. There are identical QTL or chromosomal region for the whole cocoon weight and cocoon shell weight, indicating they can be simultaneously improved by utilizing epistatic effects in breeding.

[Pridiction of the Sex-effects of the Cocoon Quality Characters in Silkworm.].

In this paper , the sex-effects of the cocoon quality characters in silkworm was predicted with Mixed linear model úThe fact that the probability of effect variance and predictability of random gender of whole cocoon weight, cocoon shell weight, ratio of cocoon shell and pupa weight reached a level of extreme significance showed that the gender effect of the four traits was extremely significant, which matched with the reality completely. The predictive values of gender effect of the four traits of female(male) were 0.248g (-0.247g), 2.423cg(-2.394)cg, -1.976%(1.992%) and 0.224g(-0.223g) respectively. Each trait showed single peak distribution after adjusting by sex-effects, which fitted for the request that quantitative traits should show continuously normal standard distribution if QTL analysis was taken.

[Construction of AFLP molecular markers linkage map and localization of green cocoon gene in silkworm (Bombyx mori)].

Based on an improved method of AFLP, AFLP markers were employed for construction of a linkage map and localization of Gc gene used a set of 44 backcross lines( BC1) of silkworm ( Bombyx mori) as a mapping population. In this work, all together 3 956 bands were obtained by 28 pairs of primers and 141.3 bands each primer pair on average. Among them 2 836 bands were in good agreement with the segregation pattern. A total of 1 018 (25.7%) polymorphic AFLP markers were detected. The 693 (68.1%) of polymorphic markers with 1:1 segregation ratio ( P < or = 0.05) were obtained. Furthermore,The analytical model was based on the backcross type and the parameters were set as following: LOD = 3.0, maximum recombination value of 0. 20 and use the command ' group', 'compare', 'try', 'map' and 'ripple' to construct the linkage maps. 407 of the 693 loci were chi2 tested in agreement with 1:1 segregation were divided into 33 linkages by Mapmaker/Exp(Version 3.0), with a total map distance of 3 676.7 cM and a mean distance of 9.1 cM between markers. The morphological gene Gc was located between L-P4T6-107 and L-PT6T4-84 on linkage group 22. In addition, 286 markers were not included in the linkage groups. The efficiency of loci mapping was 58.7%. Among the 33 linkage groups, the morphological marker Gc classically localized on linkage group 15 was relocated on linkage group 22 on the map, suggesting that this molecular linkage group corresponds to linkage group 15 on the linkage map based on morphological characters. All these have laid an important base for the marker assisted breeding of the silkworm.