ABSTRACT
The acoustically actuated nanomechanical magnetoelectric (ME) antennas represent a promising new technology that can significantly reduce antenna size by 1-2 orders of magnitude compared to traditional antennas. However, current ME antennas face challenges such as low antenna gain and narrow operating bandwidth, limiting their engineering applications. In this paper, we enhance the bandwidth and radiation performance of ME antennas through structural optimization, leveraging theoretical analysis and numerical simulations. Our findings indicate that optimizing the inner diameter of the ring-shaped ME antenna can elevate the average stress of the magnetic layer, leading to improved radiation performance and bandwidth compared to circular ME antennas. We establish an optimization model for the radiation performance of the ME antenna and conduct shape optimization simulations using COMSOL Multiphysics. The results of the Multiphysics field optimization align with the stress concentration theory, demonstrating a strong correlation between the radiation performance and bandwidth of the ME antenna with the average stress of the magnetic film. The resonant frequency in the thickness vibration mode is determined to be 170 MHz. Furthermore, shape optimization can enhance the bandwidth by up to 104% compared to circular ME antenna structures of the same size.
ABSTRACT
Tuberculosis (TB), an airborne infectious disease caused by Mycobacterium tuberculosis, has become the leading cause of death. The subsequent emergence of multidrug-resistant, extensively drug-resistant and totally drug-resistant strains, brings an urgent need to discover novel anti-TB drugs. Among them, microbial-derived anti-mycobacterial peptides, including ribosomally synthesized and post-translationally modified peptides (RiPPs) and multimodular nonribosomal peptides (NRPs), now arise as promising candidates for TB treatment. This review presents 96 natural RiPP and NRP families from bacteria and fungi that have broad spectrum in vitro activities against non-resistant and drug-resistant mycobacteria. In addition, intracellular targets of 22 molecules are the subject of much attention. Meanwhile, chemical features of 38 families could be modified in order to improve properties. In final, structure-activity relationships suggest that the modifications of various groups, especially the peptide side chains, the amino acid moieties, the cyclic peptide skeletons, various special groups, stereochemistry and entire peptide chain length are important for increasing the potency.
Subject(s)
Antitubercular Agents , Mycobacterium tuberculosis , Antitubercular Agents/pharmacology , Antitubercular Agents/chemistry , Antitubercular Agents/chemical synthesis , Mycobacterium tuberculosis/drug effects , Humans , Microbial Sensitivity Tests , Structure-Activity Relationship , Peptides/pharmacology , Peptides/chemistry , Peptides/chemical synthesis , Molecular StructureABSTRACT
Developing superporous hemostatic sponges with simultaneously enhanced permeability and mechanical properties remains challenging but highly desirable to achieve rapid hemostasis for non-compressible hemorrhage. Typical approaches to improve the permeability of hemostatic sponges by increasing porosity sacrifice mechanical properties and yield limited pore interconnectivity, thereby undermining the hemostatic efficacy and subsequent tissue regeneration. Herein, we propose a temperature-assisted secondary network compaction strategy following the phase separation-induced primary compaction to fabricate the superporous chitosan sponge with highly-interconnected porous structure, enhanced blood absorption rate and capacity, and fatigue resistance. The superporous chitosan sponge exhibits rapid shape recovery after absorbing blood and maintains sufficient pressure on wounds to build a robust physical barrier to greatly improve hemostatic efficiency. Furthermore, the superporous chitosan sponge outperforms commercial gauze, gelatin sponges, and chitosan powder by enhancing hemostatic efficiency, cell infiltration, vascular regeneration, and in-situ tissue regeneration in non-compressible organ injury models, respectively. We believe the proposed secondary network compaction strategy provides a simple yet effective method to fabricate superporous hemostatic sponges for diverse clinical applications.
Subject(s)
Chitosan , Hemostasis , Hemostatics , Permeability , Animals , Porosity , Chitosan/chemistry , Hemostatics/chemistry , Hemostatics/pharmacology , Swine , Hemostasis/physiology , Hemorrhage/therapy , MaleABSTRACT
Extracellular matrix (ECM) undergoes dynamic inflation that dynamically changes ligand nanospacing but has not been explored. Here we utilize ECM-mimicking photocontrolled supramolecular ligand-tunable Azo+ self-assembly composed of azobenzene derivatives (Azo+) stacked via cation-π interactions and stabilized with RGD ligand-bearing poly(acrylic acid). Near-infrared-upconverted-ultraviolet light induces cis-Azo+-mediated inflation that suppresses cation-π interactions, thereby inflating liganded self-assembly. This inflation increases nanospacing of "closely nanospaced" ligands from 1.8 nm to 2.6 nm and the surface area of liganded self-assembly that facilitate stem cell adhesion, mechanosensing, and differentiation both in vitro and in vivo, including the release of loaded molecules by destabilizing water bridges and hydrogen bonds between the Azo+ molecules and loaded molecules. Conversely, visible light induces trans-Azo+ formation that facilitates cation-π interactions, thereby deflating self-assembly with "closely nanospaced" ligands that inhibits stem cell adhesion, mechanosensing, and differentiation. In stark contrast, when ligand nanospacing increases from 8.7 nm to 12.2 nm via the inflation of self-assembly, the surface area of "distantly nanospaced" ligands increases, thereby suppressing stem cell adhesion, mechanosensing, and differentiation. Long-term in vivo stability of self-assembly via real-time tracking and upconversion are verified. This tuning of ligand nanospacing can unravel dynamic ligand-cell interactions for stem cell-regulated tissue regeneration.
ABSTRACT
Effective and easy regulation of hydrogel surface properties without changing the overall chemical composition is important for their diverse applications but remains challenging to achieve. We report a generalizable strategy to reconfigure hydrogel surface networks based on hydrogel-substrate interface dynamics for manipulation of hydrogel surface wettability and bioadhesion. We show that the grafting of hydrophobic yet flexible polymeric chains on mold substrates can significantly elevate the content of hydrophobic polymer backbones and reduce the presence of polar groups in hydrogel surface networks, thereby transforming the otherwise hydrophilic hydrogel surface into a hydrophobic surface. Experimental results show that the grafted highly dynamic hydrophobic chains achieved with optimal grafting density, chain length, and chain structure are critical for such substantial hydrogel surface network reconfiguration. Molecular dynamics simulations further reveal the atomistic details of the hydrogel network reconfiguration induced by the dynamic interface interactions. The hydrogels prepared using our strategy show substantially enhanced bioadhesion and transdermal delivery compared with the hydrogels of the same chemical composition but fabricated via the conventional method. Our findings provide important insights into the dynamic hydrogel-substrate interactions and are instrumental to the preparation of hydrogels with custom surface properties.
ABSTRACT
Cellular energetics plays an important role in tissue regeneration, and the enhanced metabolic activity of delivered stem cells can accelerate tissue repair and regeneration. However, conventional hydrogels with limited network cell adaptability restrict cell-cell interactions and cell metabolic activities. In this work, it is shown that a cell-adaptable hydrogel with high network dynamics enhances the glucose uptake and fatty acid ß-oxidation of encapsulated human mesenchymal stem cells (hMSCs) compared with a hydrogel with low network dynamics. It is further shown that the hMSCs encapsulated in the high dynamic hydrogels exhibit increased tricarboxylic acid (TCA) cycle activity, oxidative phosphorylation (OXPHOS), and adenosine triphosphate (ATP) biosynthesis via an E-cadherin- and AMP-activated protein kinase (AMPK)-dependent mechanism. The in vivo evaluation further showed that the delivery of MSCs by the dynamic hydrogel enhanced in situ bone regeneration in an animal model. It is believed that the findings provide critical insights into the impact of stem cell-biomaterial interactions on cellular metabolic energetics and the underlying mechanisms.
Subject(s)
Hydrogels , Wound Healing , Animals , Humans , Bone Regeneration , Cell Communication , Cell Proliferation , Cell DifferentiationABSTRACT
Diabetes is associated with higher prevalence of cognitive dysfunction, while the underlying mechanism is still elusive. In this study, we aim to explore the potential mechanism of diabetes-induced cognitive dysfunction and assess the therapeutic effects of Gastrodin on cognitive dysfunction. Diabetes was induced by a single injection of streptozotocin. The Morris Water Maze Test was employed to assess the functions of spatial learning and memory. Transcriptome was used to identify the potential factors involved. Western blot and immunofluorescence were applied to detect the protein expression. Our results have shown that spatial learning was impaired in diabetic rats, coupled with damaged hippocampal pyramidal neurons. Gastrodin intervention ameliorated the spatial learning impairments and neuronal damages. Transcriptomics analysis identified differential expression genes critical for diabetes-induced hippocampal damage and Gastrodin treatment, which were further confirmed by qPCR and western blot. Moreover, p21 activated kinase 2 (PAK2) was found to be important for diabetes-induced hippocampal injury and its inhibitor could promote the survival of primary hippocampal neurons. It suggested that PAK2 pathway may be involved in cognitive dysfunction in diabetes and could be a therapeutic target for Gastrodin intervention.
Subject(s)
Cognitive Dysfunction , Diabetes Mellitus, Experimental , Animals , Rats , Phosphorylation , p21-Activated KinasesABSTRACT
Osteosarcoma is an aggressive malignant tumor that primarily develops in children and adolescents. The conventional treatments for osteosarcoma often exert negative effects on normal cells, and chemotherapeutic drugs, such as platinum, can lead to multidrug resistance in tumor cells. Herein, this work reports a new bioinspired tumor-targeting and enzyme-activatable cell-material interface system based on DDDEEK-pY-phenylboronic acid (SAP-pY-PBA) conjugates. Using this tandem-activation system, this work selectively regulates the alkaline phosphatase (ALP) triggered anchoring and aggregation of SAP-pY-PBA conjugates on the cancer cell surface and the subsequent formation of the supramolecular hydrogel. This hydrogel layer can efficiently kill osteosarcoma cells by enriching calcium ions from tumor cells and forming a dense hydroxyapatite layer. Owing to the novel antitumor mechanism, this strategy neither hurts normal cells nor causes multidrug resistance in tumor cells, thereby showing an enhanced tumor treatment effect than the classical antitumor drug, doxorubicin (DOX). The outcome of this research demonstrates a new antitumor strategy based on a bioinspired enzyme-responsive biointerface combining supramolecular hydrogels with biomineralization.
Subject(s)
Bone Neoplasms , Osteosarcoma , Child , Humans , Adolescent , Biomineralization , Osteosarcoma/drug therapy , Osteosarcoma/pathology , Hydrogels/pharmacology , Bone Neoplasms/drug therapy , BiomarkersABSTRACT
Coacervation driven liquid-liquid phase separation of biopolymers has aroused considerable attention for diverse applications, especially for the construction of microstructured polymeric materials. Herein, a coacervate-to-hydrogel transition strategy is developed to create macroporous hydrogels (MPH), which are formed via the coacervation process of supramolecular assemblies (SA) built by the host-guest complexation between γ-cyclodextrin and anthracene dimer. The weak and reversible supramolecular crosslinks endow the SA with liquid-like rheological properties, which facilitate the formation of SA-derived macroporous coacervates and the subsequent transition to MPH (pore size ≈ 100 µm). The excellent structural dynamics (derived from SA) and the cytocompatible void-forming process of MPH can better accommodate the dramatic volumetric expansion associated with colony growth of encapsulated multicellular spheroids compared with the non-porous static hydrogel with similar initial mechanical properties. The findings of this work not only provide valuable guidance to the design of biomaterials with self-evolving structures but also present a promising strategy for 3D multicellular spheroid culture and other diverse biomedical applications.
Subject(s)
Hydrogels , Spheroids, Cellular , Hydrogels/chemistry , Polymers/chemistry , Biocompatible MaterialsABSTRACT
Developing magnetic ultrasoft robots to navigate through extraordinarily narrow and confined spaces like capillaries in vivo requires synthesizing materials with excessive deformability, responsive actuation, and rapid adaptability, which are difficult to achieve with the current soft polymeric materials, such as elastomers and hydrogels. We report a magnetically actuatable and water-immiscible (MAWI) coacervate based on the assembled magnetic core-shell nanoparticles to function as a liquid robot. The degradable and biocompatible millimeter-sized MAWI coacervate liquid robot can remain stable under changing pH and salt concentrations, release loaded cargoes on demand, squeeze through an artificial capillary network within seconds, and realize intravascular targeting in vivo guided by an external magnetic field. We believe the proposed "coacervate-based liquid robot" can implement demanding tasks beyond the capability of conventional elastomer or hydrogel-based soft robots in the field of biomedicine and represents a distinct design strategy for high-performance ultrasoft robots.
Subject(s)
Robotics , Water , Equipment Design , Physical Phenomena , Elastomers , Magnetic PhenomenaABSTRACT
The development of antenna miniaturization technology is limited by the principle of electromagnetic radiation. In this paper, the structure size of the antenna is reduced by nearly two orders of magnitude by using Acoustic excitation instead of electromagnetic radiation. For this magnetoelectric (ME) antenna, the design, simulation and experiment were introduced. Firstly, the basic design theory of magnetoelectric antennas has been refined on a Maxwell's equations basis, and the structure of the ME antenna is designed by using the Mason equivalent circuit model. The influence mechanism of structure on antenna performance is studied by model simulation. In order to verify the correctness of the proposed design scheme, an antenna sample operating at 2.45 GHz was fabricated and tested. The gain measured is -15.59 dB, which is better than the latest research that has been reported so far. Therefore, the ME antenna is expected to provide an effective new scheme for antenna miniaturization technology.
ABSTRACT
The dynamic conformational changes in the secondary structures of proteins are essential to their functions and can regulate diverse cellular events. Herein we report the design of a synthetic polymer-based secondary structure analogue of a zinc finger (ZnF) by introducing a zinc coordination motif to overcome the free energy barrier predicted by theoretical calculations and fold-free polymer chains. The conformational switching between unfolded and folded state of the ZnF analogue can be triggered in situ to drastically manipulate the accessibility of conjugated cell adhesive ligands to the cell membrane receptors, thereby effectively controlling the adhesion, spreading, mechanosensing, and differentiation of stem cells. We believe that emulating the dynamic secondary structures of proteins via rational design of a folded synthetic polymer-cation complex is a promising strategy for developing bioactive materials to mediate desired cellular functions.
Subject(s)
Stem Cells , Zinc Fingers , Cell Differentiation , Ligands , PolymersABSTRACT
In this study, the novel nanomaterial graphene oxide (GO) was added as a modifier to polyurethane-styrene-butadiene-styrene (SBS)-modified asphalt, and a graphene oxide/polyurethane/SBS composite-modified asphalt mix was prepared. The effect of the graphene oxide material on the low-temperature crack resistance of the asphalt and mixes was investigated by bending beam rheometer (BBR) tests, beamlet bending tests at different low temperatures, and characterization by scanning electron microscopy for its microscopic condition. OpenCV image processing was used to visually represent the low-temperature cracking of the mix. The results of the BBR tests showed that the incorporation of graphene oxide resulted in a reduction in creep stiffness S and an increase in creep rate m compared with the control asphalt. The best improvement in the low-temperature cracking resistance of the polyurethane/SBS-modified asphalt was achieved at 0.5% GO doping. The results of the small beam flexural tests showed that graphene oxide as a modifier improved the flexural strength and flexural strain of the mix, resulting in a mix with a lower stiffness modulus and a better relaxation stress capacity with the addition of graphene oxide, which is also expressed through the OpenCV images. Graphene oxide significantly improved the low-temperature crack resistance of polyurethane-SBS-modified asphalt and its mixes. As a new type of nanomaterial-modified asphalt, graphene oxide/polyurethane/SBS composite-modified asphalt shows promising applicability in cold zone roads.
ABSTRACT
A key challenge for the effective treatment of gastrointestinal diseases including inflammatory bowel disease is to develop an orally administered drug delivery system capable of prolonged retention in the gastrointestinal tract. Herein we report a bioadhesive liquid coacervate based on hydrogen bonding-driven nanoparticle assembly. Free from electrostatic interactions, our fluid nanoparticle-assembled coacervate demonstrates significant pH- and salt-independent structural stability and forms a physically adhesive coating on a large surface area of intestinal tract with an extended residence time of more than 2 days to mediate the sustained release of preloaded water-soluble small molecule drugs in vivo. The orally administered drug-laden nanoparticle-assembled coacervate significantly mitigates the symptoms of inflammatory bowel disease, restores the diversity of gut microbiota, reduces systemic drug exposure, and improves the therapeutic efficacy in a rat acute colitis model compared with the oral administration of the same amount of drug in solution form. We suggest that the nanoparticle-assembled coacervate provides a promising drug delivery platform for management and treatment of numerous gastrointestinal diseases where controlled drug release with extended residence time is desired.
Subject(s)
Drug Carriers/chemistry , Drug Delivery Systems/methods , Inflammatory Bowel Diseases/drug therapy , Nanoparticles/chemistry , Administration, Oral , Animals , Drug Delivery Systems/instrumentation , Female , Gastrointestinal Tract/drug effects , Humans , Hydrogen-Ion Concentration , Nanoparticles/administration & dosage , Rats , Rats, Sprague-Dawley , Static ElectricityABSTRACT
The purpose of this study is to provide a simple and reliable genetic typing approach for molecular drug susceptibility test of Mycobacterium tuberculosis, through the developing of fluorescence molecular marker of rifampicin resistance gene rpoB. Eleven fluorescent molecular markers of the rpoB gene were established by using the sequence difference between the amino acid positions 531, 526, 516, 511 and 513 of rpoB gene of rifampicin-resistant strains and the alleles of rifampicin-sensitive strains, combined with the PARMS technique (Penta-primer amplification refractory mutation system). We used 104 clinical isolates of Mycobacterium tuberculosis to validate this marker and it was verified by sequencing as 100% correct. These samples were also tested with proportional drug sensitivity test. The coincidence rate was 94.23%. The molecular markers had high reliability for genotyping of rpoB gene. It can also detect low-concentration drug-resistant samples (511/533 unit point mutations) whose phenotypic susceptibility cannot be detected. The eleven sets of fluorescent molecular markers could cover 92%-96% of rpoB gene mutation types of rifampicin-resistant strains, and provide new idea for rapid detection of rifampin-resistant Mycobacterium tuberculosis.
Subject(s)
Mycobacterium tuberculosis , Rifampin , Bacterial Proteins/genetics , DNA-Directed RNA Polymerases/genetics , Drug Resistance, Bacterial/genetics , Microbial Sensitivity Tests , Mutation , Mycobacterium tuberculosis/genetics , Reproducibility of Results , Rifampin/pharmacology , TechnologyABSTRACT
Achieving strong adhesion of bioadhesives on wet tissues remains a challenge and an acute clinical demand because of the interfering interfacial water and limited adhesive-tissue interactions. Here we report a self-gelling and adhesive polyethyleneimine and polyacrylic acid (PEI/PAA) powder, which can absorb interfacial water to form a physically cross-linked hydrogel in situ within 2 seconds due to strong physical interactions between the polymers. Furthermore, the physically cross-linked polymers can diffuse into the substrate polymeric network to enhance wet adhesion. Superficial deposition of PEI/PAA powder can effectively seal damaged porcine stomach and intestine despite excessive mechanical challenges and tissue surface irregularities. We further demonstrate PEI/PAA powder as an effective sealant to enhance the treatment outcomes of gastric perforation in a rat model. The strong wet adhesion, excellent cytocompatibility, adaptability to fit complex sites, and easy synthesis of PEI/PAA powder make it a promising bioadhesive for numerous biomedical applications.
ABSTRACT
3D culture of cells in designer biomaterial matrices provides a biomimetic cellular microenvironment and can yield critical insights into cellular behaviours not available from conventional 2D cultures. Hydrogels with dynamic properties, achieved by incorporating either degradable structural components or reversible dynamic crosslinks, enable efficient cell adaptation of the matrix and support associated cellular functions. Herein we demonstrate that given similar equilibrium binding constants, hydrogels containing dynamic crosslinks with a large dissociation rate constant enable cell force-induced network reorganization, which results in rapid stellate spreading, assembly, mechanosensing, and differentiation of encapsulated stem cells when compared to similar hydrogels containing dynamic crosslinks with a low dissociation rate constant. Furthermore, the static and precise conjugation of cell adhesive ligands to the hydrogel subnetwork connected by such fast-dissociating crosslinks is also required for ultra-rapid stellate spreading (within 18 h post-encapsulation) and enhanced mechanosensing of stem cells in 3D. This work reveals the correlation between microscopic cell behaviours and the molecular level binding kinetics in hydrogel networks. Our findings provide valuable guidance to the design and evaluation of supramolecular biomaterials with cell-adaptable properties for studying cells in 3D cultures.
Subject(s)
Biomimetics/methods , Cell Adhesion , Cell Culture Techniques/methods , Cellular Microenvironment , Hydrogels/chemistry , Mesenchymal Stem Cells/metabolism , Organoids/metabolism , Osteogenesis , Adamantane/chemistry , Biocompatible Materials/chemistry , Cholic Acid , Computer Simulation , Cross-Linking Reagents/chemistry , Cyclodextrins/chemistry , Extracellular Matrix , Humans , Kinetics , Ligands , Mechanotransduction, Cellular , Mesenchymal Stem Cells/cytology , Molecular Dynamics Simulation , Organoids/cytology , ThermodynamicsABSTRACT
Membraneless coacervate compartments in the intracellular and pericellular space mediate critical cellular functions. Developing synthetic coacervates that emulate the morphological, physical, and functional complexity of these natural coacervates is challenging but highly desirable. Herein, a generalizable nanoparticle assembly (NPA) strategy is developed, which is applicable to interactive core-shell nanoparticles with different chemical makeups, to fabricate vacuolated coacervates. The obtained NPA coacervates contain stable internal vacuoles to provide segregated microcompartments, which can mediate the spatially heterogeneous distribution of diverse macromolecules via restricted diffusion. It is further shown that the vacuolated NPA coacervates can harbor and retain macromolecular medium supplements to regulate the functions of cells encapsulated in vacuoles. Furthermore, the restricted macromolecule diffusion can be abolished on demand via the triggered coacervate-hydrogel transition, thereby altering the exposure of encapsulated cells to environmental factors. It is believed that the NPA strategy provides new insights into the design principles of hierarchical coacervates that hold promising potential for a wide array of biomedical applications.
Subject(s)
Acrylic Resins/chemistry , Artificial Cells/chemistry , Macromolecular Substances/chemistry , Nanoparticles/chemistry , Polyethylene Glycols/chemistry , Artificial Cells/metabolism , Cellular Microenvironment , Dextrans/chemistry , Hydrogels/chemistry , Macromolecular Substances/metabolism , Nanoparticles/metabolism , Phase Transition , Serum Albumin, Bovine/chemistry , Transition TemperatureABSTRACT
Hydrogels are soft materials used in an array of biomedical applications. However, the in situ formation of hydrogels at target sites, particularly in dynamic in vivo environments, usually requires a prolonged gelation time and results in poor adhesion. These limitations cause considerable loss of both hydrogel mass and encapsulated therapeutic cargoes, thereby compromising treatment outcomes. Here, we report the development of a hydrogel based on thiourea-catechol reaction to enhance the bioadhesion. Compared with classical bioadhesive hydrogels, our hydrogels show enhanced mechanical properties, exceedingly short curing time, and pH-independent gelation with a much lower oxidant concentration. We further report the robust adhesion of our hydrogels to acidic gastric tissues and easy delivery to the porcine stomach via endoscopy. The delivered hydrogels adhered to ulcer sites in vivo for at least 48 hours. Hydrogel treatment of gastric ulcers in rodent and porcine models accelerated ulcer healing by suppressing inflammation and promoting re-epithelization and angiogenesis. The improved retention of proregenerative growth factors and reduced exposure to external catabolic factors after hydrogel application may contribute to the observed therapeutic outcomes. Our findings reveal a promising biomaterial-based approach for treating gastrointestinal diseases.
Subject(s)
Hydrogels , Stomach Ulcer , Animals , Hydrogen-Ion Concentration , Stomach Ulcer/drug therapy , Swine , UlcerABSTRACT
Background: Septicemia in children in mainland China has recently become a public health concern. Methods: A meta-analysis was performed on studies investigating the prevalence of cephalosporin-resistant Escherichia coli isolated from children with septicemia in mainland China from 2007 to 2017 following a search of relevant databases. Results: A total of 43 articles reporting 11 cephalosporins were included in the review. The results of the meta-analysis revealed that for the first-generation cephalosporins, the pooled summarized prevalence of resistance to cefazolin was 74.96% (95% confidence interval [CI]: 64.79-83.91) and cephalothin resistance was 62.28% (95% CI: 36.45-100). Regarding the second-generation cephalosporins, cefoxitin-resistant E. coli comprised 23.85% (95% CI: 10.60-40.40) and cefuroxime resistance was 60.32% (95% CI: 51.25-68.73). For the third-generation cephalosporins, the pooled summarized prevalence of resistance was 51.34% for cefotaxime (95% CI: 40.08-62.54), 40.43% for ceftazidime (95% CI: 31.07-50.15), 45.51% for cefoperazone (95% CI: 20.41-70.61), 12.10% for cefoperazone/sulbactam (95% CI: 6.55-18.76), 62.99% for ceftriaxone (95% CI: 55.00-70.98), and 0% for cefotetan. Among the fourth-generation cephalosporins, resistance to cefepime was 34.08% (95% CI: 25.91-43.31). Conclusions: Most third-generation cephalosporins (e.g., cefotaxime and ceftriaxone) retained high resistance rates throughout the 11-year study period without significant changes. The new fourth-generation cephalosporin, cefepime, is rapidly gaining resistance. Interestingly, ceftazidime, cefepime, and cefoperazone/sulbactam showed a recent decreasing trend of drug resistance. These situations may present a risk for treating children with septicemia and should be closely monitored and treated.