ABSTRACT
Enamel has good optical and mechanical properties because of its multiscale hierarchical structure. Biomimetic construction of enamel-like 3D bulk materials at nano-, micro-, mesh- and macro-levels is a challenge. A novel facile, cost-effective, and easy large-scale bottom-up assembly strategy to align 1D hydroxyapatite (HA) nanowires bundles to 3D hierarchical enamel structure with the nanowires bundles layer-by-layer interweaving orientation, is reported. In the strategy, the surface of oleate templated ultralong HA nanowires with a large aspect ratio is functionalized with amphiphilic 10-methacryloyloxydecyl dihydrogen phosphate (MDP). Furtherly, the MDP functionalized HA nanowire bundles are assembled layer-by-layer with oriented fibers in a single layer and cross-locked between layers at a certain angle at mesoscale and macroscale in the viscous bisphenol A-glycidyl methacrylate (Bis-GMA) ethanol solution by shear force induced by simple agitation and high-speed centrifugation. Finally, the excessive Bis-GMA and ethanol are removed, and (Bis-GMA)-(MDP-HA nanowire bundle) matrix is densely packed under hot pressing and polymerized to form bulk enamel-like materials. The composite has superior optical properties and comparable comprehensive mechanic performances through a combination of strength, hardness, toughness, and friction. This method may open new avenues for controlling the nanowires assembly to develop hierarchical nanomaterials with superior properties for many different applications.
ABSTRACT
Soft-tissue sealing at transmucosal sites is very important for preventing the invasion of pathogens and maintaining the long-term stability and function of dental implants. However, the colonization of oral pathogens on the implant surface and surrounding soft tissues can disturb the early establishment of soft-tissue sealing and even induce peri-implant infection. The purpose of this study was to construct two antibacterial coatings with 5 or 10 sodium alginate/chlorhexidine bilayers on titanium surfaces using layer-by-layer self-assembly technology to promote soft-tissue sealing. The corresponding chemical composition, surface topography, wettability and release behaviour were investigated to prove that the resultant coating of sodium alginate and chlorhexidine was coated on the porous titanium surface. In-vitro and in-vivo antibacterial results showed that both prepared coatings inhibited or killed the bacteria on their surfaces and the surrounding areas to prevent plaque biofilm formation, especially the coating with 10 bilayers. Although both coatings inhibited the initial adhesion of fibroblasts, the cytocompatibility gradually improved with coating degradation. More importantly, both coatings achieved cell adhesion and proliferation in an in-vitro bacterial environment and effectively alleviated bacteria-induced subcutaneous inflammation in-vivo. Therefore, this study demonstrated that the multilayered coating could prevent implant-related infections in the initial stage of implant surgery and then improve soft-tissue integration with implant devices.
Subject(s)
Anti-Infective Agents , Dental Implants , Chlorhexidine/pharmacology , Titanium/pharmacology , Alginates/pharmacology , Anti-Bacterial Agents/pharmacologyABSTRACT
The durability of the resin-dentin bonding interface is a key issue in clinical esthetic dentistry. Inspired by the extraordinary bioadhesive properties of marine mussels in a wet environment, we designed and synthetized N-2-(3,4-dihydroxylphenyl) acrylamide (DAA) according to the functional domain of mussel adhesive proteins. DAA's properties of collagen cross-linking, collagenase inhibition, inducing collagen mineralization in vitro, and as a novel prime monomer for clinical dentin adhesion use, its optimal parameters, and effect on the adhesive longevity and the bonding interface's integrity and mineralization, were evaluated in vitro and in vivo. The results showed that oxide DAA can inhibit the activity of collagenase and cross collagen fibers to improve the anti-enzymatic hydrolysis of collagen fibers and induce intrafibrillar and interfibrillar collagen mineralization. As a primer used in the etch-rinse tooth adhesive system, oxide DAA can improve the durability and integrity of the bonding interface by anti-degradation and mineralization of the exposed collagen matrix. Oxidized DAA (OX-DAA) is a promising primer for improving dentin durability; using 5% OX-DAA ethanol solution and treating the etched dentin surface for 30 s is the optimal choice when used as a primer in the etch-rinse tooth adhesive system.
ABSTRACT
Silver has been widely used for surface modification to prevent implant-associated infections. However, the inherent cytotoxicity of silver greatly limited the scope of its clinical applications. The construction of surfaces with both good antibacterial properties and favorable cytocompatibility still remains a challenge. In this study, a structurally homogeneous dopamine-silver (DA/Ag) nanocomposite was fabricated on the implant surface to balance the antibacterial activity and cytocompatibility of the implant. The results show that the DA/Ag nanocomposites prepared under the acidic conditions (pH = 4) on the titanium surface are homogeneous with higher Ag+ content, while an obvious core (AgNPs)-shell (PDA) structure is formed under neutral (pH = 7) and alkaline conditions (pH = 10), and the subsequent heat treatment enhanced the stability of PDA-AgNPs nanocomposite coatings on porous titanium. The antibacterial test, cytotoxicity test, hypodermic implantation and osteogenesis test revealed that the homogeneous PDA-AgNPs nanocomposite coating achieved the balance between the antibacterial ability and cytocompatibility, and had the best outcomes for soft tissue healing and bone formation around the implants. This study provides a facile strategy for preparing silver-loaded surfaces with both good antibacterial effect and favorable cytocompatibility, which is expected to further improve the therapeutic efficacy of silver composite-coated dental implants.
ABSTRACT
OBJECTIVE: Resin-based dental adhesion is mostly utilized in minimally invasive operative dentistry. However, improving the durability and stability of resin-dentin bond interfaces remain a challenge. Graphene quantum dots (GQDs) reinforced by 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) were introduced to modify the resin-dentin bond interfaces, thereby promoting their durability and stability. METHODS: GQDs, EDC, and EDC+GQDs groups were designed to evaluate the effects of GQDs and EDC on collagenase activity, the interaction of GQDs with collagen, and the resin-dentin interface. First, the effects of GQDs and EDC on collagenase activity was evaluated by Collagenase (EC 3.4.24.3) reacting with its substrate. The interaction of GQDs and EDC with collagen were evaluated by cross-linking degree analysis, sodium dodecyl sulfate-polyacrylamide gel electrophoresis, attenuated total reflection Fourier transform infrared spectroscopy and enzymatic hydrolysis. Second, the acid-etched and rinse adhesive system was used to evaluate the resin-dentin bond on the basis of microtensile bond strength, in situ zymography and fluorescence confocal laser scanning microscopy. RESULTS: GQDs could inhibit collagenase activity. GQDs with the aid of EDC could cross-link collagen via covalent bonds and improve the anti-enzymatic hydrolysis of collagen. In the resin-dentin adhesion model, the µTBS of the EDC+GQDs group was significantly higher than the other control groups after thermocycling. The addition of EDC to GQDs could inhibit matrix metalloproteinase activity and promote the integrity of the bonding interfaces after thermocycling. SIGNIFICANCE: This study presents a novel strategy to modify the resin-dentin interface and provides a new application for GQDs. This strategy has the potential to improve the durability of resin-based restoration in dentistry.
Subject(s)
Dental Bonding , Graphite , Quantum Dots , Carbodiimides , Dentin , Dentin-Bonding Agents , Materials Testing , Resin Cements , Tensile StrengthABSTRACT
The reconstruction of the intra/interfibrillar mineralized collagen microstructure is extremely important in biomaterial science and regeneration medicine. However, certain problems, such as low efficiency and long period of mineralization, are apparent, and the mechanism of interfibrillar mineralization is often neglected in the present literature. Thus, we propose a novel model of biomimetic collagen mineralization that uses molecules with the dual function of cross-linking collagen and regulating collagen mineralization to construct the intrafibrillar and interfibrillar collagen mineralization of the structure of mineralized collagen hard tissues. In the present study completed in vitro, N-2-(3,4-dihydroxyphenyl) acrylamide (DAA) is used to bind and cross-link collagen molecules and further stabilize the self-assembled collagen fibers. The DAA-collagen complex provides more affinity with calcium and phosphate ions, which can reduce the calcium phosphate/collagen interfacial energy to promote hydroxyapatite (HA) nucleation and accelerate the rate of collagen fiber mineralization. Besides inducing intrafibrillar mineralization, the DAA-collagen complex mineralization template can realize interfibrillar mineralization with the c-axis of the HA crystal on the surface of collagen fibers and between fibers that are parallel to the long axis of collagen fibers. The DAA-collagen complex, as a new type of mineralization template, may provide a new collagen mineralization strategy to produce a mineralized scaffold material for tissue engineering or develop bone-like materials.
Subject(s)
Acrylamide/chemistry , Biomimetic Materials/chemistry , Collagen/chemistry , Dopamine/chemistry , Bone and Bones , Calcium/chemistry , Calcium/metabolism , Calcium Phosphates/chemistry , Cross-Linking Reagents/chemistry , Crystallization , Durapatite/chemistry , Durapatite/metabolism , Extracellular Matrix/metabolism , Humans , Molecular Dynamics Simulation , Polymerization , Regenerative Medicine , Surface Properties , Tissue EngineeringABSTRACT
Although icephobic surfaces have been extensively investigated in the past decades, a controversy remains on the relationship between water repellency and ice repellency. Little insight has been truly obtained on the dependence of ice adhesion on the surface/interface characteristics because of the limited range of these characteristics that have been investigated in the past. In this study, we prepared 37 coatings with a wide range of surface characteristics. The measured ice adhesion strength was discussed in correlation with water wettability and surface topological parameters. It was verified that parameters related to water wettability, such as water contact angle, contact angle hysteresis, and an index of work of adhesion with water, (1 + cos θrec), do not have a simple correlation with ice adhesion strength. Thus, they should not be used as a design parameter for low icephobic surfaces. The current study points out that the study of surface texture should be carried out in conjunction with surface chemistry/energy consideration. Without control of the surface chemistry, the correlation between surface texture parameters will lead to inconsistent conclusions because of the uncertainty of the contact mode. Our investigation indicates that low ice adhesion strength (<50 kPa) is attainable with a smooth surface (root-mean-squared roughness < 50 nm) when a low surface energy (<15 mJ/m2) is maintained. This finding opens a new paradigm for the design of icephobic coatings away from the conventional practices of using superhydrophobic and oil-infused surfaces.
ABSTRACT
Enamel, the hardest tissue in the human body, has excellent mechanical properties, mainly due to its highly ordered spatial structure. Fabricating enamel-like structure is still a challenge today. In this work, a simple and highly efficient method was introduced, using the silk fibroin as a template to regulate calcium- and phosphate- supersaturated solution to regenerate enamel-like hydroxyapatite crystals on various substrates (enamel, dentin, titanium, and polyethylene) under rotary evaporation. The enamel-like zinc oxide nanorod array structure was also successfully synthesized using the aforementioned method. This strategy provides a new approach to design and fabricate mineral crystals with particular orientation coatings for materials.
Subject(s)
Biomimetic Materials/chemical synthesis , Fibroins/chemistry , Hydroxyapatites/chemical synthesis , Zinc Oxide/chemical synthesis , Biomimetic Materials/chemistry , Calcium/chemistry , Crystallization , Dental Enamel/chemistry , Humans , Hydroxyapatites/chemistry , Nanotubes , Phosphates/chemistry , Tooth Remineralization , Zinc Oxide/chemistryABSTRACT
BACKGROUND Chronic myelogenous leukemia (CML) has unsatisfactory treatment efficacy at present. As the major component of red orpiment, tetra-arsenic tetra-sulfide (As4S4) has been recently used in treating leukemia, but with unclear mechanism targeting CML. MicroRNA (miR) is a group of endogenous non-coding RNAs regulating pathogenesis. MiR181 has been shown to exert important roles in tumor progression. The relationship between miR181 and As4S4 in inducing K562 cell apoptosis, however, is still unclear. MATERIAL AND METHODS CML cell line K562 was cultured in vitro in a control group and in groups receiving various dosages (20 µM and 40 µM) of As4S4. MTT assay was employed to detect the effect on K562 cell survival. MiR181 expression was quantified by real-time PCR. MTT assay and assay kit were used to determine K562 cell survival and caspase 3 expression. Cell apoptosis was assessed by flow cytometry. Bcl-2 expression was determined by real-time PCR and Western blotting. RESULTS As4S4 significantly suppressed proliferation of K562 cells (p<0.05) and decreased miR181 expression, and increased caspase3 activity compared to the control group. It can induce K562 cell apoptosis via remarkably down-regulating mRNA and protein expressions of Bcl-2 (p<0.05). CONCLUSIONS As4S4 can facilitate K562 cell apoptosis via down-regulating miR181, inhibiting Bcl02 expression, and enhancing apoptotic protein caspase3 activity.
Subject(s)
Apoptosis/drug effects , Arsenicals/pharmacology , Down-Regulation/drug effects , MicroRNAs/genetics , Sulfides/pharmacology , Caspase 3/metabolism , Cell Proliferation/drug effects , Gene Expression Regulation, Leukemic/drug effects , Humans , K562 Cells , Leukemia, Myelogenous, Chronic, BCR-ABL Positive/genetics , Leukemia, Myelogenous, Chronic, BCR-ABL Positive/pathology , MicroRNAs/metabolism , Proto-Oncogene Proteins c-bcl-2/genetics , Proto-Oncogene Proteins c-bcl-2/metabolism , RNA, Messenger/genetics , RNA, Messenger/metabolismABSTRACT
OBJECTIVE: To investigate the effect of Chinese recipe, Wuye Decoction (WYD), on immune function in patients with non-small cell lung cancer (NSCLC). METHODS: Eighty-two patients of NSCLC with pathologically confirmed diagnosis, who had received operative treatment and completed the post-operational chemotherapy, were randomly assigned into 2 groups. Group A (42 cases) received WYD and Group B (40 cases) received no specific medicine. Positive rate of various peripheral lymphocyte subsets, including CD3, CD4, CD8, CD16, CD19 and CD25, in both groups was observed immediately after chemotherapy (T(0)) and 3 months later (T(1)), the same indexes of 20 healthy volunteers allocated in Group C were also determined at T(0) for control. RESULTS: The positive rates of CD4, CD4/CD8, CD16, CD19 and CD25 were significantly lower (P < 0.05) while that of CD8 was significantly higher (P < 0.05) in Group A and B at T(0) than those in Group C; at T(1), these indexes, except CD25, got significantly restored in Group A with the level approaching normal range (P > 0.05), and showed significant difference from those in Group B (P < 0.05), since these indexes in that group remained unchanged at the corresponding period. As for CD25, it was insignificantly changed in Group A after WYD treatment, and thus, at T(1), it was still lower than that in Group C (P < 0.05) and showed insignificant difference as compared with that in Group B (P > 0.05). Comparison of CD3 among the 3 groups showed no significant difference (P > 0.05). CONCLUSION: WYD could activate the immune function of NSCLC patients, and so it is recommended to be used in the treatment of NSCLC in clinical practice.