ABSTRACT
Fiber-based pressure/temperature sensors are highly desired in wearable electronics because of their natural advantages of good breathability and easy integrability. However, it is still a great challenge to fabricate reliable and highly sensitive fiber-based pressure/temperature sensors via a scalable and facile strategy. Herein, a novel fiber-based iontronic sensor with excellent pressure- and temperature-sensing capabilities is designed by assembling two crossed hollow and porous ionogel fibers filled with liquid metal. Serving as a pressure sensor, a high detection resolution (1.16 Pa), a high sensitivity of 13.30 kPa-1 (0-2 kPa), and a wide detection range (â¼207 kPa) are realized owing to its novel hierarchical structure and the selection of deformable liquid electrodes. As a temperature sensor, it exhibits a high temperature sensitivity of 25.99% °C-1 (35-40 °C), high resolution of 0.02 °C, and good repeatability and reliability. On the basis of these excellent sensing capabilities, the as-prepared sensor can detect not only pressure signals varied from weak pulse to large joint movements but also the proximity of different objects. Furthermore, a large-area fiber array can be easily woven for acquiring the pressure mapping to intuitively distinguish the location, magnitude, and shape of the loaded object. This work provides a universal strategy to design fiber-shaped iontronic sensors for wearable electronics.
ABSTRACT
We experimentally demonstrated an all-fiber reflective orbital angular momentum (OAM) generator based on orthogonal fiber Bragg grating (OFBG). The OFBG is formed by using a femtosecond laser to prepare two fiber Bragg gratings with a certain spacing in orthogonal planes. The ±1st- and ±2nd-order OAM modes were directly excited in this OFBG, and the chirality of the OAM modes depends on the relative positions of the two FBGs. The mode coupling properties and effects of center-to-center distance on OAM modes were investigated as well.
ABSTRACT
A chiral long period fiber grating (CLPFG) was designed according to the phase-matching condition and conservation law of angular momentum, and was inscribed in a ring core fiber (RCF). This CLPFG was used to directly excite the ±2nd- and ±3rd-order orbital angular momentum (OAM) modes. The coupling efficiency of the OAM mode is up to 98.7% and the insertion loss is within 0.5â dB. The uniformity of the annular mode intensity distribution, polarization characteristics, and the mode purity of coupled OAM modes were investigated in detail. Results show that the coupled high-order OAM modes possess a relative uniform annular intensity distribution, its mode purity is up to 93.2%, and the helical phase modulation is independent on the polarization state of incident light. These results indicate that the RCF-based CLPFG is an ideal OAM mode converter for future high-capacity optical fiber communication systems.
ABSTRACT
A novel optical fiber sensing technology based on intensity distribution change in orbital angular momentum (OAM) mode is proposed and implemented herein. The technology utilizes a chiral long-period fiber grating (CLPFG) to directly excite the 1st-order OAM (OAM1) mode. The intensity changes in the coherent superposition state between the fundamental mode and the OAM1 mode at the non-resonant wavelength of the CLPFG is tracked in order to sense the external parameters applied to the grating area. Applying this technology to temperature measurement, the intensity distribution change has a good linear relationship with respect to temperature in the range of 30 °C to 100 °C. When the intensity was denoted by the number of pixels with a gray value of one after binarization of collected images, the sensitivity was 103 px/°C and the corresponding resolution was 0.0097 °C. Meanwhile, theoretical and experimental results show that the sensitivity and resolution can be further improved via changing the area of the collected image. Compared with sensing methods based on spiral interference pattern rotation in previous work, this sensing technology has the advantage of exquisite structure, easy realization, and good stability, thus making it a potential application in practices.
ABSTRACT
A method employing femtosecond lasers to inscribe helical long period fiber grating (HLPFG) for exciting orbital angular momentum (OAM) of light is experimentally demonstrated. In this method, the refractive index modulation (RIM) of HLPFG is realized by three-dimensional translation of a fiber without rotation, indicating better stability, repeatability and flexibility. The coupling efficiency can be customized by varying the radius of the helical RIM, except laser energy. The characteristics of phase and polarization purity of the coupled modes in HLPFGs are studied. Results show that HLPFGs can directly excite OAM modes, the polarization state and helical phase of the mode can be adjusted independently, and the purity is the highest at resonant wavelength, over 91%.
ABSTRACT
A class of ultra-short chiral long period fiber gratings (CLPFGs) are prepared by writing a spiral curve on the surface of a six-mode fiber. The CLPFGs are applied to excite ±2nd- and ±3rd-order orbital angular momentum (OAM) modes. The coupling efficiency of the CLPFG in these modes can be as high as 99%, when the length is only 0.5cm. The polarization characteristic of the excited higher-order OAM modes in CLPFGs was theoretically analyzed and experimentally investigated. Results show that the obtained ±2nd- and ±3rd-order OAM modes are polarization independent, as expected.
ABSTRACT
Optical orbital angular momentum (OAM) has been recently implemented in holography technologies as an independent degree of freedom for boosting information capacity. However, the holography capacity and fidelity suffer from the limited space-bandwidth product (SBP) and the channel crosstalk, albeit the OAM mode set exploited as multiplexing channels is theoretically unbounded. Here, we propose the ultra-dense perfect OAM holography, in which the OAM modes are discriminated both radially and angularly. As such, the perfect OAM mode set constructs the two-dimensional spatial division multiplexed holography (conventional OAM holography is 1D). The extending degree of freedom enhances the holography capacity and fidelity. We have demonstrated an ultra-fine fractional OAM holography with the topological charge resolution of 0.01. A 20-digit OAM-encoded holography encryption has also been exhibited. It harnesses only five angular OAM topological charges ranging from -16 to +16. The SBP efficiency is about 20 times larger than the conventional phase-only OAM holography. This work paves the way to compact, high-security and high-capacity holography.
ABSTRACT
Wearable strain and temperature sensors are desired for human-machine interfaces, health monitoring, and human motion monitoring. Herein, the fibrous mat with aligned nanofibers of ionic liquid (IL)/thermoplastic polyurethane (TPU) ionogels is fabricated via an electrospinning technique. The resultant fibrous mat is cut into a rectangle specimen and electrodes are loaded along the direction perpendicular to the nanofiber orientation to design a high-performance multimodal sensor based on an ionic conducting mechanism. As a strain sensor, the obtained sensor exhibits a wide strain working range (0-200%), a fast response and recovery (119 ms), a low detection limit (0.1%), and good reproducibility because of the reversible and deformable ionic conductive pathways of the sensor. Moreover, the sensor also exhibits excellent temperature-sensing behaviors, including a monotonic thermal response, high sensitivity (2.75% °C-1), high accuracy (0.1 °C), a fast response time (2.46 s), and remarkable repeatability, attributable to the negative temperature coefficient behavior of the IL/TPU fibrous mat. More interestingly, the IL/TPU fibrous sensor possesses good breathability, which is desired for wearable electronics. Because of these excellent sensing capabilities in strain and temperature, the sensor can not only monitor tiny and large human motions but also detect respiration and proximity, exhibiting enormous potential in wearable electronics.
Subject(s)
Ionic Liquids/chemistry , Monitoring, Physiologic , Polyurethanes/chemistry , Respiration , Temperature , Wearable Electronic Devices , Electric Conductivity , Humans , Nanofibers/chemistryABSTRACT
In this Letter, a method for orbital angular momentum (OAM) mode generation is proposed and experimentally demonstrated using a fiber Bragg grating (FBG) and off-axis incidence. The FBG fabricated by a femtosecond laser was used to couple the incidence beam into backward high-order modes. The generated modes were then reformed into ring-shaped OAM modes by adjusting the off-axis displacement of the input beam. The intensity distribution, phase vortex, and mode purity of the output light were experimentally investigated. Results indicates that the order of the generated OAM modes is dependent on the resonant wavelength of the FBG, and the sign of the OAM topological charge is determined by the displacement value of the off-axis incident light. In the experiment, ±1- and ±2-order OAM modes were achieved and confirmed, with purities as high as 90%, 91%, 89%, and 88%, respectively.
ABSTRACT
In this paper, we propose and demonstrate an all-fiber high-efficiency focused vortex beam generator. The generator is fabricated by integrating a kinoform spiral zone plate (KSZP) on the top of the composite fiber structure using fs-laser two-photon polymerization 3D nanoprinting. The KSZP with spiral continuous-surface relief feature is designed by superimposing a spiral phase into a kinoform lens, which can efficiently concentrate and transform an all incident beam to a single-focus vortex beam, without the undesired zero-order diffracted light and extra high-order focus. Under arbitrary polarized light incident conditions, experiment results show that the focusing efficiency and vortex purity of the all-fiber generators are over 60% and 86%, respectively, which is much higher than that of a traditional binary SZP integrated on an optical fiber facet. In addition, characteristics of the generated vortex beam, such as focal spot, focal length and vortex topological charge are numerically designed and experimentally investigated. The experimental results agree well with the numerical simulation model using the FDTD algorithm. Due to the compact size, flexible design, polarization insensitivity, high focusing efficiency and high vortex purity, the proposed all-fiber photonic devices have promising potential in optical communication, particle manipulation and quantum computation applications.
ABSTRACT
An orthogonal long-period fiber grating (OLPFG) is proposed and demonstrated for directly exciting the orbital angular momentum (OAM), without the need for other devices. This grating was produced using CO2 laser exposure in the orthogonal direction. A helical phase was then optically induced in the OLPFG, with a chirality determined by the structure of the OLPFG. In this study, ±1-order OAM resonances were respectively observed in OLPFGs with a different orthogonal direction. The conversion efficiency of OAM mode in this process was 99%, and the purity was higher than 98%. In addition, incident light in any polarization state was observed to excite OAM with the same polarization.
ABSTRACT
The space domain is regarded as the only known physical dimension of lightwaves left to be exploited for optical communications. Very recently, much research effort has been devoted to using orbital angular momentum (OAM) spatial modes to increase the transmission capacity in fiber-optic communications. However, long-distance low-crosstalk high-order OAM multiplexing transmission in fiber is quite challenging. Here we design and fabricate a graded-index ring-core fiber to effectively suppress radially high-order modes and greatly separate high-order OAM mode groups. By exploiting high-order OAM mode group multiplexing, together with wavelength-division multiplexing (WDM), i.e., 12.5 Gbaud 8-array quadrature amplitude modulation (8-QAM) signals over OAM+4 and OAM+5 modes on 112 WDM channels (224 individual channels), we experimentally demonstrate 8.4 Tbit/s data transmission in an 18 km OAM fiber with low crosstalk. Multiple-input multiple-output digital signal processing is not required in the experiment because of the large high-order mode group separation of the OAM fiber. The demonstrations may open a door to find more fiber-optic communication and interconnect applications exploiting high-order OAM modes.
ABSTRACT
A high speed free-space optical communication system capable of self-bending signal transmission around line-of-sight obstacles is proposed and demonstrated. Airy beams are generated and controlled to achieve different propagating trajectories, and the signal transmission characteristics of these beams around the obstacle are investigated. Our results confirm that, by optimizing their ballistic trajectories, Airy beams are able to bypass obstacles with more signal energy and thus improve the communication performance compared with normal Gaussian beams.
ABSTRACT
We propose and demonstrate a scalable mode division multiplexing scheme based on orbital angular momentum modes in ring core fibers. In this scheme, the high-order mode groups of a ring core fiber are sufficiently de-coupled by the large differential effective refractive index so that multiple-input multiple-output (MIMO) equalization is only used for crosstalk equalization within each mode group. We design and fabricate a graded-index ring core fiber that supports 5 mode groups with low inter-mode-group coupling, small intra-mode-group differential group delay, and small group velocity dispersion slope over the C-band for the high-order mode groups. We implement a two-dimensional wavelength- and mode-division multiplexed transmission experiment involving 10 wavelengths and 2 mode groups each with 4 OAM modes, transmitting 32 GBaud Nyquist QPSK signals over all 80 channels. An aggregate capacity of 5.12 Tb/s and an overall spectral efficiency of 9 bit/s/Hz over 10 km are realized, only using modular 4x4 MIMO processing with 15 taps to recover signals from the intra-mode-group mode coupling. Given the fixed number of modes in each mode group and the low inter-mode-group coupling in ring core fibres, our scheme strikes a balance in the trade-off between system capacity and digital signal processing complexity, and therefore has good potential for capacity upscaling at an expense of only modularly increasing the number of mode-groups with fixed-size (4x4) MIMO blocks.
ABSTRACT
An orbital-angular-momentum (OAM) mode-group multiplexing (MGM) scheme using high-order mode groups (MGs) in a graded-index ring-core fiber (GIRCF) is proposed, in which a receive-diversity architecture is designed for each MG to suppress the mode partition noise resulting from random intra-group mode crosstalk. The signal-to-noise ratio (SNR) of the received signals is further improved by a simple maximal ratio combining (MRC) technique on the receiver side to efficiently take advantage of the diversity gain of the receiver. Intensity-modulated direct-detection (IM-DD) systems transmitting three OAM mode groups with total 100-Gb/s discrete multi-tone (DMT) signals over a 1-km GIRCF and two OAM mode groups with total 40-Gb/s DMT signals over an 18.4-km GIRCF are experimentally demonstrated, respectively, to confirm the feasibility of our proposed OAM-MGM scheme.
ABSTRACT
The transfer matrix of light propagating in fibers can quantitatively elucidate the mechanisms of mode coupling, thus having important implications for the knowledge such as the mode division multiplexing communication link characteristics in fibers. However, most methods for measuring the transfer matrix require a prior knowledge of the launched modes at the input and a complex optical system for the characterization at the output of the fiber. In this Letter, we use an interferometric approach for decomposing orbital angular momentum (OAM) modes of the output beams from a ring-core fiber, thereby processing a 14×14 OAM mode transfer matrix of the fiber with merely a camera imaging the mode field at the output of the fiber. The suitability of such a method is validated by the beam reconstruction. Thus, this method is crucial for characterizing the fiber transfer matrix with promising features of fast response and simple operation.