ABSTRACT
Objective: To establish an intelligent registration algorithm under the framework of original-mirror alignment algorithm to construct three-dimensional(3D) facial midsagittal plane automatically. Dynamic Graph Registration Network (DGRNet) was established to realize the intelligent registration, in order to provide a reference for clinical digital design and analysis. Methods: Two hundred clinical patients without significant facial deformities were collected from October 2020 to October 2022 at Peking University School and Hospital of Stomatology. The DGRNet consists of constructing the feature vectors of key points in point original and mirror point clouds (X, Y), obtaining the correspondence of key points, and calculating the rotation and translation by singular value decomposition. Original and mirror point clouds were registrated and united. The principal component analysis (PCA) algorithm was used to obtain the DGRNet alignment midsagittal plane. The model was evaluated based on the coefficient of determination (R2) index for the translation and rotation matrix of test set. The angle error was evaluated on the 3D facial midsagittal plane constructed by the DGRNet alignment midsagittal plane and the iterative closet point(ICP) alignment midsagittal plane for 50 cases of clinical facial data. Results: The average angle error of the DGRNet alignment midsagittal plane and ICP alignment midsagittal plane was 1.05°±0.56°, and the minimum angle error was only 0.13°. The successful detection rate was 78%(39/50) within 1.50° and 90% (45/50)within 2.00°. Conclusions: This study proposes a new solution for the construction of 3D facial midsagittal plane based on the DGRNet alignment method with intelligent registration, which can improve the efficiency and effectiveness of treatment to some extent.
ABSTRACT
Type II innate lymphoid cell (ILC2) is a newly identified innate immunological cell that belongs to the lymphocyte lineage in cell morphology, resides in the body's mucosal tissues, and has the dual functions of innate and adaptive immunity to promote tissue remodeling and repair after injury. Additionally, it is involved in the occurrence and development of a variety of liver diseases and plays an important role in maintaining the immunological homeostasis of the liver region. This article reviews the differentiation, development, and biological functions of ILC2, with particular attention to the research progress in liver diseases.
Subject(s)
Immunity, Innate , Liver Diseases , Humans , Lymphocytes , Cell DifferentiationABSTRACT
Brucellosis has become a global zoonotic disease, seriously endangering the health of people all over the world. Vaccination is an effective strategy for protection against Brucella infection in livestock in developed countries. However, current vaccines are pathogenic to humans and pregnant animals, which limits their use. Therefore, it is very important to improve the safety and immune protection of Brucella vaccine. In this study, different bioinformatics approaches were carried out to predict the physicochemical properties, T/B epitope, and tertiary structure of Omp2b and Omp31. Then, these two proteins were sequentially linked, and the Cytotoxic T lymphocyte associated antigen-4 (CTLA-4) variable region was fused to the N-terminal of the epitope sequence. In addition, molecular docking was performed to show that the structure of the fusion protein vaccine had strong affinity with B7 (B7-1, B7-2). This study showed that the designed vaccine containing CTLA-4 had high potency against Brucella, which could provide a reference for the future development of efficient brucellosis vaccines.
Subject(s)
Bacterial Vaccines , Brucellosis , CTLA-4 Antigen , Brucellosis/prevention & control , Brucella , Bacterial Vaccines/immunology , CTLA-4 Antigen/immunology , Humans , Animals , Epitopes/immunology , Molecular Docking Simulation , Computational Biology , Bacterial Proteins/immunology , Amino Acid Sequence , Protein Structure, Tertiary , Recombinant Fusion Proteins/immunologyABSTRACT
OBJECTIVE: The objective of this study was to evaluate the diagnostic value of magnetic resonance imaging (MRI) in neurovascular bundle injury during total hip arthroplasty. PATIENTS AND METHODS: The magnetic resonance imaging (MRI) examinations of the hip joints of 429 patients were reviewed. The distances on the left and right sides were measured and recorded using small, hydrophilic gadolinium (III)-based chelates as contrast agents. The data were analyzed and handled using Statistical Product and Service Solutions (SPSS). RESULTS: The results showed that each measured distance in males was longer than in females, on both right and left sides (p<0.001). The coefficient of determination (R2) of the influencing factors on the three distances was found to be 0.162, 0.038, and 0.104, respectively, in multiple linear regressions. The results of the Pearson's correlation coefficient also suggested that there was a significant correlation (p<0.05). CONCLUSIONS: This study demonstrates that MRI can be a valuable diagnostic tool for neurovascular bundle injury during total hip arthroplasty. The gender difference in the measured distances indicates that sex should be considered when interpreting MRI findings.
ABSTRACT
Objective: To explore an automatic landmarking method for anatomical landmarks in the three-dimensional (3D) data of the maxillary complex and preliminarily evaluate its reproducibility and accuracy. Methods: From June 2021 to December 2022, spiral CT data of 31 patients with relatively normal craniofacial morphology were selected from those who visited the Department of Oral and Maxillofacial Surgery, Peking University School and Hospital of Stomatology. The sample included 15 males and 16 females, with the age of (33.3±8.3) years. The maxillary complex was reconstructed in 3D using Mimics software, and the resulting 3D data of the maxillary complex was mesh-refined using Geomagic software. Two attending physicians and one associate chief physician manually landmarked the 31 maxillary complex datasets, determining 24 anatomical landmarks. The average values of the three expert landmarking results were used as the expert-defined landmarks. One case that conformed to the average 3D morphological characteristics of healthy individuals' craniofacial bones was selected as the template data, while the remaining 30 cases were used as target data. The open-source MeshMonk program (a non-rigid registration algorithm) was used to perform an initial alignment of the template and target data based on 4 landmarks (nasion, left and right zygomatic arch prominence, and anterior nasal spine). The template data was then deformed to the shape of the target data using a non-rigid registration algorithm, resulting in the deformed template data. Based on the unchanged index property of homonymous landmarks before and after deformation of the template data, the coordinates of each landmark in the deformed template data were automatically retrieved as the automatic landmarking coordinates of the homonymous landmarks in the target data, thus completing the automatic landmarking process. The automatic landmarking process for the 30 target data was repeated three times. The root-mean-square distance (RMSD) of the dense corresponding point pairs (approximately 25 000 pairs) between the deformed template data and the target data was calculated as the deformation error of the non-rigid registration algorithm, and the intra-class correlation coefficient (ICC) of the deformation error in the three repetitions was analyzed. The linear distances between the automatic landmarking results and the expert-defined landmarks for the 24 anatomical landmarks were calculated as the automatic landmarking errors, and the ICC values of the 3D coordinates in the three automatic landmarking repetitions were analyzed. Results: The average three-dimensional deviation (RMSD) between the deformed template data and the corresponding target data for the 30 cases was (0.70±0.09) mm, with an ICC value of 1.00 for the deformation error in the three repetitions of the non-rigid registration algorithm. The average automatic landmarking error for the 24 anatomical landmarks was (1.86±0.30) mm, with the smallest error at the anterior nasal spine (0.65±0.24) mm and the largest error at the left oribital (3.27±2.28) mm. The ICC values for the 3D coordinates in the three automatic landmarking repetitions were all 1.00. Conclusions: This study established an automatic landmarking method for three-dimensional data of the maxillary complex based on a non-rigid registration algorithm. The accuracy and repeatability of this method for landmarking normal maxillary complex 3D data were relatively good.
Subject(s)
Algorithms , Imaging, Three-Dimensional , Male , Female , Humans , Adult , Imaging, Three-Dimensional/methods , Reproducibility of Results , Software , Tomography, Spiral Computed , Anatomic Landmarks/anatomy & histologyABSTRACT
Objective: To provide a new solution for the digital design of nasal prostheses, this study explores the three-dimensional (3D) facial morphology completion method for external nasal defects based on the non-rigid registration process of 3D face template. Methods: A total of 20 male patients with tooth defect and dentition defect who visited the Department of Prosthodontics, Peking University School and Hospital of Stomatology from June to December 2022 were selected, age 18-45 years old. The original 3D facial data of patients were collected, and the 3D facial data of the external nose defect was constructed in Geomagic Wrap 2021 software. Using the structured 3D face template data constructed in the previous research of the research group, the 3D face template was deformed and registered to the 3D facial data of external nose defect (based on the morphology of non-defective area) by non-rigid registration algorithm (MeshMonk program), and the personalized deformed data of the 3D face template was obtained, as the complemented facial 3D data. Based on the defect boundary of the 3D facial data of the external nose defect, the complemented external nose 3D data can be cut out from the complemented facial 3D data. Then the nasofacial angle and nasolabial angle of the complemented facial 3D data and the original 3D facial data was compared and analyzed, the ratio between the nose length and mid-face height, nose width and medial canthal distance of the complemented facial 3D data was measured, the edge fit between the edge curve of the complemented external nose 3D data and the defect edge curve of the 3D facial data of external nose defect was evaluated, and the morphological difference of the nose between the complemented external nose 3D data and the original 3D facial data was analyzed. Results: There was no significant statistically difference (t=-0.23, P=0.823; Z=-1.72, P=0.086) in the nasofacial angle (28.2°±2.9°, 28.4°±3.5° respectively) and nasolabial angle [95.4°(19.2°), 99.9°(9.5°) respectively] between the 20 original 3D facial data and the complemented facial 3D data. The value of the ratio of nose length to mid-face height in the complemented facial 3D data was 0.63±0.03, and the value of the ratio of nose width to medial canthal distance was 1.07±0.08. The curve deviation (root mean square value) between the edge curve of the complemented external nose 3D data and the defect edge curve of the 3D facial data of external nose defect was (0.37±0.09) mm, the maximum deviation was (1.14±0.32) mm, and the proportion of the curve deviation value within±1 mm was (97±3)%. The distance of corresponding nose landmarks between the complemented facial 3D data and the original 3D facial data were respectively, Nasion: [1.52(1.92)] mm; Pronasale: (3.27±1.21) mm; Subnasale: (1.99±1.09) mm; Right Alare: (2.64±1.34) mm; Left Alare: (2.42± 1.38) mm. Conclusions: The method of 3D facial morphology completion of external nose defect proposed in this study has good feasibility. The constructed complemented external nose 3D data has good facial coordination and edge fit, and the morphology is close to the nose morphology of the original 3D facial data.
ABSTRACT
Objective: To explore a method for digitally designing and fabricating a sequential tooth-sectioning guide that can assist in the extraction of mandibular horizontal impacted third molars, preliminarily evaluate its feasibility and provide a reference for clinical application. Methods: Twenty patients with mandibular low level impacted third molars who visited the Department of General Dentistry, Peking University School and Hospital of Stomatology from March 2021 to January 2022 were selected. Cone-beam CT showed direct contact between the roots and mandibular canal, and full range impressions of the patients' intraoral teeth were taken and optical scans of the dental model were performed. The patients' cone-beam CT data and optical scan data were reconstructed in three dimensions, anatomical structure extraction, registration fusion, and the design of the structure of the guide (including crown-sectioning guide and root-sectioning guide) by Mimics 24.0, Geomagic Wrap 2021, and Magics 21.0 software, and then the titanium guide was three dimension printed, and the guide was tried on the dental model. After confirmation, the guide was used to assist the dentist in the operation. We observed whether the guide was in place, the number of tooth splitting, the matching of tooth splitting with the preoperative design, the operation time, and whether there were any complications. Results: In this study, 20 sectioning guides were successfully printed, all of them were well fitted in the patients' mouth, the average number of section was 3.4 times, the tooth parts was better matched with the preoperative design, and the average operative time of the guides was (29.2±9.8) minutes without complications such as perforation of the bone cortex. Conclusions: The use of sequential sectioning guides to assist in the extraction of mandibular impacted third molars was initially validated to accurately replicate the preoperative sectioning design, and is expected to provide a digital solution to improve surgical precision and ensure safety. Further studies with larger sample sizes are needed to evaluate its accuracy and safety.
ABSTRACT
OBJECTIVE: To quantitatively evaluate the trueness of five chairside three-dimensional facial scanning techniques, and to provide reference for the application of oral clinical diagnosis and treatment. METHODS: The three-dimensional facial data of the subjects were collected by the traditional professional three-dimensional facial scanner Face Scan, which was used as the reference data of this study. Four kinds of portable three-dimensional facial scanners (including Space Spider, LEO, EVA and DS-FScan) and iPhone â © mobile phone (Bellus3D facial scanning APP) were used to collect three-dimensional facial data from the subjects. In Geomagic Studio 2013 software, through data registration, deviation analysis and other functions, the overall three-dimensional deviation and facial partition three-dimensional deviation of the above five chairside three-dimensional facial scanning technologies were calculated, and their trueness performance evaluated. Scanning time was recorded during the scanning process, and the subject's comfort was scored by visual analogue scale(VAS). The scanning efficiency and patient acceptance of the five three-dimensional facial scanning techniques were evaluated. RESULTS: DS-FScan had the smallest mean overall and mean partition three-dimensional deviation between the test data and the reference data, which were 0.334 mm and 0.329 mm, respectively. The iPhone â © mobile phone had the largest mean overall and mean partition three-dimensional deviation between the test data and the reference data, which were 0.483 mm and 0.497 mm, respectively. The detailed features of the three-dimensional facial data obtained by Space Spider were the best. The iPhone â © mobile phone had the highest scanning efficiency and the highest acceptance by the subject. The average scanning time of the iPhone â © mobile phone was 14 s, and the VAS score of the subjects' scanning comfort was 9 points. CONCLUSION: Among the five chairside three-dimensional face scanning technologies, the trueness of the scan data of the four portable devices had no significant difference, and they were all better than the iPhone â © mobile phone scan. The subject with the iPhone â © scanning technology had the best expe-rience.
Subject(s)
Imaging, Three-Dimensional , Software , Models, DentalABSTRACT
The evolutions of MHD instability behaviors and enhancement of both electrostatic and electromagnetic turbulence towards the plasma disruption have been clearly observed in the HL-2A plasmas. Two types of plasma disruptive discharges have been investigated for similar equilibrium parameters: one with a distinct stage of a small central temperature collapse ([Formula: see text] 5-10%) around 1 millisecond before the thermal quench (TQ), while the other without. For both types, the TQ phase is preceded by a rotating 2/1 tearing mode, and it is the development of the cold bubble from the inner region of the 2/1 island O-point along with its inward convection that causes the massive energy loss. In addition, the micro-scale turbulence, including magnetic fluctuations and density fluctuations, increases before the small collapse, and more significantly towards the TQ. Also, temperature fluctuations measured by electron cyclotron emission imaging enhances dramatically at the reconnection site and expand into the island when approaching the small collapse and TQ, and the expansion is more significant close to the TQ. The observed turbulence enhancement near the X-point cannot be fully interpreted by the linear stability analysis by GENE. Evidences suggest that nonlinear effects, such as the reduction of local [Formula: see text] shear and turbulence spreading, may play an important role in governing turbulence enhancement and expansion. These results imply that the turbulence and its interaction with the island facilitate the stochasticity of the magnetic flux and formation of the cold bubble, and hence, the plasma disruption.
ABSTRACT
OBJECTIVE: To explore an efficient and automatic method for determining the anatomical landmarks of three-dimensional(3D) mandibular data, and to preliminarily evaluate the performance of the method. METHODS: The CT data of 40 patients with normal craniofacial morphology were collected (among them, 30 cases were used to establish the 3D mandibular average model, and 10 cases were used as test datasets to validate the performance of this method in determining the mandibular landmarks), and the 3D mandibular data were reconstructed in Mimics software. Among the 40 cases of mandibular data after the 3D reconstruction, 30 cases that were more similar to the mean value of Chinese mandibular features were selected, and the size of the mandibular data of 30 cases was normalized based on the Procrustes analysis algorithm in MATLAB software. Then, in the Geomagic Wrap software, the 3D mandibular average shape model of the above 30 mandibular data was constructed. Through symmetry processing, curvature sampling, index marking and other processing procedures, a 3D mandible structured template with 18 996 semi-landmarks and 19 indexed mandibular anatomical landmarks were constructed. The open source non-rigid registration algorithm program Meshmonk was used to match the 3D mandible template constructed above with the tested patient's 3D mandible data through non-rigid deformation, and 19 anatomical landmark positions of the patient's 3D mandible data were obtained. The accuracy of the research method was evaluated by comparing the distance error of the landmarks manually marked by stomatological experts with the landmarks marked by the method of this research. RESULTS: The method of this study was applied to the data of 10 patients with normal mandibular morphology. The average distance error of 19 landmarks was 1.42 mm, of which the minimum errors were the apex of the coracoid process [right: (1.01±0.44) mm; left: (0.56±0.14) mm] and maximum errors were the anterior edge of the lowest point of anterior ramus [right: (2.52±0.95) mm; left: (2.57±1.10) mm], the average distance error of the midline landmarks was (1.15±0.60) mm, and the average distance error of the bilateral landmarks was (1.51±0.67) mm. CONCLUSION: The automatic determination method of 3D mandibular anatomical landmarks based on 3D mandibular average shape model and non-rigid registration algorithm established in this study can effectively improve the efficiency of automatic labeling of 3D mandibular data features. The automatic determination of anatomical landmarks can basically meet the needs of oral clinical applications, and the labeling effect of deformed mandible data needs to be further tested.
Subject(s)
Imaging, Three-Dimensional , Mandible , Humans , Imaging, Three-Dimensional/methods , Mandible/diagnostic imaging , Software , Algorithms , Anatomic Landmarks/anatomy & histologyABSTRACT
Brucellosis has become a global zoonotic disease, seriously endangering the health of people all over the world. Vaccination is an effective strategy for protection against Brucella infection in livestock in developed countries. However, current vaccines are pathogenic to humans and pregnant animals, which limits their use. Therefore, it is very important to improve the safety and immune protection of Brucella vaccine. In this study, different bioinformatics approaches were carried out to predict the physicochemical properties, T/B epitope, and tertiary structure of Omp2b and Omp31. Then, these two proteins were sequentially linked, and the Cytotoxic T lymphocyte associated antigen-4 (CTLA-4) variable region was fused to the N-terminal of the epitope sequence. In addition, molecular docking was performed to show that the structure of the fusion protein vaccine had strong affinity with B7 (B7-1, B7-2). This study showed that the designed vaccine containing CTLA-4 had high potency against Brucella, which could provide a reference for the future development of efficient brucellosis vaccines.
Subject(s)
Ambulatory Surgical Procedures , Hysteroscopy , Pregnancy , Female , Humans , Consensus , East Asian PeopleABSTRACT
OBJECTIVE: Currently, there are still no convincing clinical models predicting closed lower extremity fracture-associated deep vein thrombosis in patients treated through thromboprophylactic methods. We aimed at using two retrospective cohorts to develop and externally verify a clinical prediction model for deep vein thrombosis in patients treated with anticoagulants after suffering closed lower extremity fractures. PATIENTS AND METHODS: We evaluated the patients' pre- and post-operatively, to accurately determine the predictive power of the biomarkers and clinical risk factors. Two retrospective cohorts were used for the development and external verification of a pre-operative clinical prediction model (development: n = 2,253; verification: n = 833) and post-operative clinical prediction model (development: n = 1,422; verification: n = 449), respectively. RESULTS: The C-indices were used to show the predicted incidence of objective thrombosis at the pre- and post-operative stage, which were then compared with the observed incidence of thrombosis in both cohorts. Biomarkers and clinical indicators were included in pre- and post-operative nomograms, which were adequately calibrated in both cohorts. The cross-validated C-indices of the pre- and post-operative clinical prediction models in the verification cohort were 0.706 (95% Cl, 0.67-0.74) and 0.875 (95% Cl, 0.84-0.91), respectively. CONCLUSIONS: We present our findings of novel pre- and post-operative nomograms for the prediction of deep venous thrombosis in patients who received thromboprophylaxis after suffering closed lower extremity fractures.
Subject(s)
Fractures, Bone , Venous Thromboembolism , Venous Thrombosis , Humans , Anticoagulants/therapeutic use , Models, Statistical , Retrospective Studies , Prognosis , Fractures, Bone/complications , Fractures, Bone/surgery , Venous Thrombosis/drug therapy , Venous Thrombosis/etiology , Venous Thrombosis/prevention & control , Lower ExtremityABSTRACT
Objective: To analyze the significance of HBV DNA below the lower detection limit of HBV RNA levels after long-term nucleos(t)ide analogues (NAs) antiviral therapy in patients with hepatitis B virus cirrhosis. Methods: 97 cases with hepatitis B virus cirrhosis treated with NAs antiviral therapy for at least 3 years between May 2018 to July 2019 were selected. High-sensitivity HBV DNA (<20 IU/ml), alanine aminotransferase (ALT), aspartate aminotransferase (AST), γ-glutamyltransferase (GGT), HBsAg, HBeAg and HBV RNA at least twice every 6 months were detected. According to Child-Pugh classification, HBeAg, HBsAg level, and HBV RNA level intergroup comparison was performed. Rank sum test, χ2 test and linear regression analysis were performed on the data. Results: Compared with the HBV RNA level of child-Pugh class A patients, the HBV RNA level of Child-Pugh class B+C patients were significantly higher [4.1 (0,4.9) log10 copies/ml and 2.0 (0,3.5) log10 copies/ml], and the difference was statistically significant (Z=2.370, P<0.05). According to different HBeAg levels, they were divided into HBeAg positive and negative group, and the quantitative comparison of HBV RNA levels between the two groups were 2.0 (0, 4.5) log10 copies/ml and 1.0 (1.0, 2.0) log10 copies/ml, respectively, and the difference was statistically significant (Z=3.233, P<0.05). According to different HBsAg levels, they were divided into three groups: HBsAg≤100 IU/ml, 100Subject(s)
Hepatitis B virus
, Hepatitis B, Chronic
, Antiviral Agents/therapeutic use
, DNA, Viral
, Hepatitis B Surface Antigens
, Hepatitis B e Antigens
, Hepatitis B virus/genetics
, Humans
, Limit of Detection
, Liver Cirrhosis/drug therapy
, Plant Extracts
, RNA
ABSTRACT
Objective: To explore the establishment of an efficient and automatic method to determine anatomical landmarks in three-dimensional (3D) facial data, and to evaluate the effectiveness of this method in determining landmarks. Methods: A total of 30 male patients with tooth defect or dentition defect (with good facial symmetry) who visited the Department of Prosthodontics, Peking University School and Hospital of Stomatology from June to August 2021 were selected, and these participants' age was between 18-45 years. 3D facial data of patients was collected and the size normalization and overlap alignment were performed based on the Procrustes analysis algorithm. A 3D face average model was built in Geomagic Studio 2013 software, and a 3D face template was built through parametric processing. MeshLab 2020 software was used to determine the serial number information of 32 facial anatomical landmarks (10 midline landmarks and 22 bilateral landmarks). Five male patients with no mandibular deviation and 5 with mild mandibular deviation were selected from the Department of Orthodontics or Oral and Maxillofacial Surgery, Peking University School and Hospital of Stomatology from June to August 2021. 3D facial data of patients was collected as test data. Based on the 3D face template and the serial number information of the facial anatomical landmarks, the coordinates of 32 facial anatomical landmarks on the test data were automatically determined with the help of the MeshMonk non-rigid registration algorithm program, as the data for the template method to determine the landmarks. The positions of 32 facial anatomical landmarks on the test data were manually determined by the same attending physician, and the coordinates of the landmarks were recorded as the data for determining landmarks by the expert method. Calculated the distance value of the coordinates of facial anatomical landmarks between the template method and the expert method, as the landmark localization error, and evaluated the effect of the template method in determining the landmarks. Results: For 5 patients with no mandibular deviation, the landmark localization error of all facial anatomical landmarks by template method was (1.65±1.19) mm, the landmark localization error of the midline facial anatomical landmarks was (1.19±0.45) mm, the landmark localization error of bilateral facial anatomical landmarks was (1.85±1.33) mm. For 5 patients with mild mandibular deviation, the landmark localization error of all facial anatomical landmarks by template method was (2.55±2.22) mm, the landmark localization error of the midline facial anatomical landmarks was (1.85±1.13) mm, the landmark localization error of bilateral facial anatomical landmarks was (2.87±2.45) mm. Conclusions: The automatic determination method of facial anatomical landmarks proposed in this study has certain feasibility, and the determination effect of midline facial anatomical landmarks is better than that of bilateral facial anatomical landmarks. The effect of determining facial anatomical landmarks in patients without mandibular deviation is better than that in patients with mild mandibular deviation.
Subject(s)
Malocclusion , Orthodontics , Adolescent , Adult , Algorithms , Anatomic Landmarks , Cephalometry/methods , Face/anatomy & histology , Female , Humans , Imaging, Three-Dimensional/methods , Male , Middle Aged , Software , Young AdultABSTRACT
Objective: To determinate the value of tumor growth rate (TGR) in evaluating the efficacy of early drug treatment for neuroendocrine neoplasm (NEN). Methods: Patients with NEN who treated at Chinese Academy of Medical Sciences Cancer Hospital from January 2010 to December 2018 were retrospectively enrolled. A total of 30 patients (16 males and 14 females, aged from 26 to 73 (53±11) years) were enrolled. The sum of largest diameter of target lesions and the interval time were measured, TGR of 3 months after the first treatment was calculated using a formula. Intraclass correlation coefficient (ICC) were used to test the repeatability of TGR. Receiver operating characteristic curve (ROC) analysis was used to determine the optimal cut-off values of TGR for predicting progression-free survival (PFS). Overall patients and SD patients assessed by RECIST were grouped by the optimal cut-off values of TGR. Kaplan-Meier method was used to estimate PFS rates and plot patient survival curves of patients at different group of TGR. Cox risk proportional hazard model was used to assess the effect of TGR on the prognosis. Results: The optimal cut-off value of TGR was -5.8(%/m), the area under the curve was 0.921 (95%CI: 0.824-0.999, P<0.001). Interobserver ICC was 0.955 (95%CI: 0.907-0.978,P<0.001). Multivariate Cox analysis showed that compared with the patients with TGR<-5.8, the patients with TGR ≥-5.8 had a higher risk of progression in either overall population (HR: 10.906, 95%CI: 1.953-60.898, P=0.006) or the SD population (HR: 14.354, 95%CI: 1.602-128.627, P=0.017); TGR ≥-5.8 was an independent risk factor affecting the prognosis of NEN. Conclusions: TGR can evaluate the efficacy of NEN's early anti-tumor drug treatment, and associate with prognosis.
Subject(s)
Neuroendocrine Tumors , Female , Humans , Male , Prognosis , Progression-Free Survival , ROC Curve , Retrospective StudiesABSTRACT
A 52-year old man was admitted to our hospital because of dyspnea on exertion for 2 months and subcutaneous nodules for 1 month. Chest enhanced CT showed bilateral hilar and mediastinal lymphadenopathy. Bronchial alveolar lavage fluid revealed a CD4+/CD8+ T cell subsets ratio of 4.3 and culture for acid-fast bacillus (AFB) was negative. The pathology of skin nodules and transbronchial needle aspiration biopsy guided by endoscopic ultrasound (EBUS-TBNA) revealed non-caseating necrotizing epithelioid granulomas with negative acid-fast bacilli staining and periodic acid-Schiff staining, which was compatible with sarcoidosis. The patient was diagnosed as sarcoidosis and glucocorticoid was administrated. The subcutaneous nodules were improved. However, the lymph nodes were enlarged instead of shrinking after 6-month therapy. The failure to respond to glucocorticoids raised the possibility of sarcoidosis complicated with tuberculosis infection. The patient received anti-tuberculosis therapy. Lymphadenopathy responded within 4 months, and there was complete regression after 18-month treatment. The patient was followed up for 5 years and repeated chest CT scan showed that the sizes of bilateral hilar and mediastinal lymph nodes were normal.
Subject(s)
Lymphadenopathy , Mediastinal Diseases , Bronchoscopy , Endoscopic Ultrasound-Guided Fine Needle Aspiration , Humans , Lymph Nodes/diagnostic imaging , Male , Mediastinum/diagnostic imaging , Middle AgedABSTRACT
Objective: To investigate the changes of disease spectrum in diffuse parenchymal lung disease (DPLD) diagnosed by surgical lung biopsy, and to explore the diagnostic value of surgical lung biopsy in DPLD. Methods: Four hundred and fifty-five consecutive DPLD patients, who underwent surgical lung biopsy in Peking Union Medical College Hospital during the past 28 years, were analyzed retrospectively. Results: There were 211 males and 244 females. The average age at biopsy was (45±14) years. Four hundred and eleven cases (90.3%) were diagnosed by pathologic findings. Four hundred and forty-one cases (96.9%) were diagnosed by clinical-radiologic-pathologic multidisciplinary discussion. The 30-day mortality and 90-day mortality were 2.4% and 3.3% respectively. The disease spectrum included interstitial pneumonia in 209 cases (45.9%) (nonspecific interstitial pneumonia in 105 cases, usual interstitial pneumonia in 33 cases), other miscellaneous DPLD in 166 cases (36.5%) (including hypersensitivity pneumonitis in 49 cases), tumor in 39 cases (8.6%), and infectious diseases in 27 cases (5.9%). In the three consecutive periods (1993-2002, 2003-2012 and 2013-2020), the number of biopsies was 76 (16.7%), 297 (65.3%) and 82 (18%) respectively. The disease spectrum changes over time: in the above three periods, the percentage of interstitial pneumonia in DPLD was 68.4%, 45.1% and 28%, other miscellaneous DPLDs were 22.4%, 39.4% and 39.0%, the tumors were 2.6%, 7.4% and 18.3%, the infectious diseases were 5.3%, 5.1% and 9.8%. Conclusions: This study presented the changes of disease spectrum in DPLD diagnosed by surgical lung biopsy through single center real-world data, reflecting the progress of clinicians' understanding of DPLD and interstitial pneumonia. Surgical lung biopsy is still valuable for some difficult and complicated DPLD cases.
Subject(s)
Lung Diseases, Interstitial , Biopsy , China , Female , Humans , Lung/pathology , Lung Diseases, Interstitial/diagnosis , Lung Diseases, Interstitial/pathology , Male , Retrospective StudiesABSTRACT
OBJECTIVE: To establish a deep learning algorithm that can accurately determine three-dimensional facial anatomical landmarks, multi-view stacked hourglass convolutional neural networks (MSH-CNN) and to construct three-dimensional facial midsagittal plane automatically based on MSH-CNN and weighted Procrustes analysis algorithm. METHODS: One hundred subjects with no obvious facial deformity were collected in our oral clinic. Three-dimensional facial data were scanned by three-dimensional facial scanner. Experts annotated twenty-one facial landmarks and midsagittal plane of each data. Eighty three-dimensional facial data were used as training set, to train the MSH-CNN in this study. The overview of MSH-CNN network architecture contained multi-view rendering and training the MSH-CNN network. The three-dimensional facial data were rendered from ninety-six views that were fed to MSH-CNN and the output was one heatmap per landmark. The result of the twenty-one landmarks was accurately placed on the three-dimensional facial data after a three-dimensional view ray voting process. The remaining twenty three-dimensional facial data were used as test set. The trained MSH-CNN automatically determined twenty-one three-dimensional facial anatomical landmarks of each case of data, and calculated the distance between each MSH-CNN landmark and the expert landmark, which was defined as position error. The midsagittal plane of the twenty subjects' could be automatically constructed, using the MSH-CNN and Procrustes analysis algorithm. To evaluate the effect of midsagittal plane by automatic method, the angle between the midsagittal plane constructed by the automatic method and the expert annotated plane was calculated, which was defined as angle error. RESULTS: For twenty subjects with no obvious facial deformity, the average angle error of the midsagittal plane constructed by MSH-CNN and weighted Procrustes analysis algorithm was 0.73°±0.50°, in which the average position error of the twenty-one facial landmarks automatically determined by MSH-CNN was (1.13±0.24) mm, the maximum position error of the orbital area was (1.31±0.54) mm, and the minimum position error of the nasal area was (0.79±0.36) mm. CONCLUSION: This research combines deep learning algorithms and Procrustes analysis algorithms to realize the fully automated construction of the three-dimensional midsagittal plane, which initially achieves the construction effect of clinical experts. The obtained results constituted the basis for the independent intellectual property software development.
Subject(s)
Deep Learning , Algorithms , Face , Humans , Neural Networks, Computer , SoftwareABSTRACT
OBJECTIVE: To automatically construct lips symmetry reference plane (SRP) based on posed smile, and to evaluate its advantages over conventional digital aesthetic design. METHODS: Eighteen subjects' three-dimensional facial and dentition data were gathered in this study. The lips SRP of experimental groups were used with the standard weighted Procrustes analysis (WPA) algorithm and iterative closest point (ICP), respectively. A reference plane defined by experts based on regional ICP algorithm, served as the truth plane. The angle error values between the lips SRP of WPA algorithm in the experimental groups and the truth plane were evaluated in this study, and the lips SRP of ICP algorithm of the experimental groups was calculated in the same way. The lips SRP based on posed smile as a reference for aesthetic design and evaluate preliminary clinical application. RESULTS: The average angle error between the lips SRP of WPA algorithm and the truth plane was 1.78°±1.24°, which was smaller than that between the lips SRP of ICP and the truth plane 7.41°±4.31°. There were significant differences in the angle errors among the groups (P < 0.05). In the aesthetic design of anterior teeth, automatically constructing the lips SRP of WPA algorithm based on posed smile and the original symmetry plane by re-ference compared with the prosthetic design, the subjects' scores on the lips SRP of WPA algorithm based on posed smile (8.48±0.57) were higher than those on the original symmetry plane (5.20±1.31). CONCLUSION: Automatically constructing the lips SRP of WPA algorithm based on posed smile was more accurate than ICP algorithm, which was consistent with the truth plane. Moreover, it can provide an important reference for oral aesthetic diagnosis and aesthetic analysis of the restoration effect. In the aesthetic design of anterior teeth, automatically constructing the lips SRP of WPA algorithm based on posed smile can improve the patients' satisfaction in esthetic rehabilitation.