ABSTRACT
OBJECTIVE: This work is aimed to Formulate, Optimize and Evaluate Gastro-Retentive Microspheres of Antidiabetic Agent by Full Factorial Design. METHODS: Microspheres were prepared using Emulsification-cross linking technique. To this HPMC-K4M and Carbopol was dissolved in 250 ml of water and allowed to swell for 24 hr at room temperature. And separately chitosan was dissolved in 3% (v/v) glacial acetic acid and this also kept for 24 h to swell or dissolve properly. After 24hr this swelled mixture was mixed under magnetic stirrer (Remi, India) at specific stirring rate for 1hr in order to find homogeneous mass of both the gum. Then slurry of chitosan also was homogenized for half an hour. The drug, Glipizide (1g) was then added to the chitosan solution and mixed homogenesously. RESULTS: The aim of the study was to formulate and evaluate microspheres, for Gastro-Retentive Microspheres of the chosen drug. The EE of microspheres was found to be 91.52%, maximum . Buoyancy property observed was 93.82% for Optimized formulation F-9, Drug release 57.34% till 8 h. The work also aims to study various parameters affecting the behaviour of microspheres in oral dosage form. CONCLUSION: Drugs with short half-life that are absorbed from the gastrointestinal tract (GIT) are eliminated rapidly from the blood flow. To avoid this, the oral SR Gastro-retentive was developed as this formulation released the drug slowly into the GIT and maintained a stable drug concentration in the serum for a longer duration of time.
Subject(s)
Chitosan , Hypoglycemic Agents , Microspheres , Hypoglycemic Agents/administration & dosage , Chitosan/chemistry , Drug Stability , Delayed-Action Preparations , Animals , Rats , Glipizide/administration & dosage , Glipizide/pharmacokineticsABSTRACT
In this work, the effect of sonication on the molecular characteristics of polyacrylic acid (Carbopol® Ultrez 10), as well as on its rheological behavior in aqueous dispersions and microgels, was analyzed for the first time by rheometry, weight-average molecular weight (Mw) measurements via static light scattering (SLS), Fourier transform infrared (FTIR) spectroscopy and confocal microscopy. For this, the precursor dispersion and the microgels containing 0.25 wt.% of Ultrez 10 were sonicated in a commercial ultrasound bath at constant power and at different times. The main rheological properties of the microgel, namely, shear modulus, yield stress and viscosity, all decreased with increasing sonication time, while the microgel's Herschel-Bulkley (H-B) behavior, without thixotropy, was preserved. Also, Mw of Ultrez 10 decreased up to almost one-third (109,212 g/mol) of its original value (300,860 g/mol) after 180 min of sonication. These results evidence a softening of the gel microstructure, which results from the reduction in the Mw of polyacrylic acid with sonication time. Separately, FTIR measurements show that sonication produces scission in the C-C links of the Carbopol® backbone, which results in chains with the same chemistry but lower molecular weight. Finally, confocal microscopy observations revealed a diminution of the size of the microsponge domains and more free solvent with sonication time, which is reflected in a less compact and softer microstructure. The present results indicate that both the microstructure and the rheological behavior of Carbopol® microgels, in particular, and complex fluids, in general, may be manipulated or tailored by systematic high-power ultrasonication.
ABSTRACT
Determining the safety of a newly developed experimental product is a crucial condition for its medical use, especially for clinical trials. In this regard, four hydrogel-type formulations were manufactured, all of which were based on carbomer (Blank-CP940) and encapsulated with caffeine (CAF-CP940), phosphorus derivatives (phenyl phosphinic (CAF-S1-CP940) and 2-carboxyethyl phenyl phosphinic acids (CAF-S2-CP940)). The main aim of this research was to provide a comprehensive outline of the biosafety profile of the above-mentioned hydrogels. The complex in vitro screening (cell viability, cytotoxicity, morphological changes in response to exposure, and changes in nuclei morphology) on two types of healthy skin cell lines (HaCaT-human keratinocytes and JB6 Cl 41-5a-murine epidermal cells) exhibited a good biosafety profile when both cell lines were treated for 24 h with 150 µg/mL of each hydrogel. A comprehensive analysis of the hydrogel's impact on the genetic profile of HaCaT cells sustains the in vitro experiments. The biosafety profile was completed with the in vivo and in ovo assays. The outcome revealed that the developed hydrogels exerted good biocompatibility after topical application on BALB/c nude mice's skin. It also revealed a lack of toxicity after exposure to the hen's chicken embryo. Further investigations are needed, regarding the in vitro and in vivo therapeutic efficacy and safety for long-term use and potential clinical translatability.
ABSTRACT
In the present study, we have formulated a methotrexate (MTX)-loaded microemulsion topical gel employing quality-by-design optimization. The optimized lipid-based microemulsion was incorporated into a 2% carbopol gel. The prepared formulation was characterized for micromeritics, surface charge, surface morphology, conductivity studies, rheology studies, texture analysis/spreadability, drug entrapment, and drug loading studies. The formulation was further evaluated for drug release and release kinetics, cytotoxicity assays, drug permeation and drug retention studies, and dermatokinetics. The developed nanosystem was not only rheologically acceptable but also offered substantial drug entrapment and loading. From drug release studies, it was observed that the nanogel showed higher drug release at pH 5.0 compared to plain MTX, plain gel, and plain microemulsion. The developed system with improved dermatokinetics, nanometric size, higher drug loading, and enhanced efficacy towards A314 squamous epithelial cells offers a huge promise in the topical delivery of methotrexate.
Subject(s)
Drug Liberation , Emulsions , Gels , Methotrexate , Skin Absorption , Methotrexate/administration & dosage , Methotrexate/chemistry , Methotrexate/pharmacokinetics , Humans , Skin Absorption/drug effects , Rheology , Lipids/chemistry , Administration, Cutaneous , Skin/metabolism , Skin/drug effects , Administration, Topical , Drug Delivery Systems/methods , Animals , Particle Size , Drug Carriers/chemistry , Nanogels/chemistryABSTRACT
Sealing of soft tissues prevents leakage of gas and liquid, closes wounds, and promotes healing and is, therefore, of great significance in the clinical and medical fields. Although various formulations have been developed for reliable sealing of soft tissue, tradeoffs between adhesive properties, degradation profile, and tissue toxicity limit their clinical use. Hydrogel-based adhesives, for example, are highly biocompatible but adhere very weakly to the tissue and degrade quickly, while oxidized cellulose patches are poorly absorbed and may cause healing complications postoperatively. Here, we present a novel strategy for tissue sealing based on bioadhesive microneedle patches that can spontaneously adhere to tissue surface through electrostatic interactions and swell within it. A series of microneedle patches made of pullulan, chitosan, Carbopol, poly (lactic-co-glycolic acid), and a Carbopol/chitosan combination were fabricated and characterized for their use in tissue sealing. The effect of microneedle composition on the fabrication process, physical and mechanical properties, in vitro cytotoxicity, and in vivo biocompatibility were examined. The needle structure enables microneedles to strongly fix onto various tissues via physical interlocking, while their adhesive properties improve staying time and sealing capabilities. The microneedle patch comprising Carbopol needles and chitosan as a second pedestal layer presented the best results in terms of sealing and adhesion, a consequence of the needle's swelling and adhesion features combined with the supportive chitosan base layer. Finally, single Carbopol/chitosan patches stopped intense liver bleeding in a rat model significantly quicker and with less blood loss compared with commercial oxidized cellulose patches. These microneedles can be considered a promising cost-effective platform for adhering and sealing tissues as they can be applied quickly and painlessly, and require less trained medical staff and equipment.
ABSTRACT
With the aim to find an alternative vehicle to the most used thermosensitive hydrogels for efficient nanotechnology-based nose-to-brain delivery approach for Parkinson's disease (PD) treatment, in this work we evaluated the Dopamine (DA) and the antioxidant grape seed-derived pro-anthocyanidins (Grape Seed Extract, GSE) co-loaded solid lipid nanoparticles (SLNs) put in slight viscous dispersions (SVDs). These SVDs were prepared by dispersion in water at low concentrations of mucoadhesive polymers to which SLN pellets were added. For the purpose, we investigated two polymeric blends, namely Poloxamer/Carbopol (PF-127/Carb) and oxidized alginate/Hydroxypropylmethyl cellulose (AlgOX/HPMC). Rheological studies showed that the two fluids possess Newtonian behaviour with a viscosity slightly higher that water. The pH values of the SVDs were mainly within the normal range of nasal fluid as well as almost no osmotic effect was associated to both SVDs. All the SVDs were capable to provide DA permeation through nasal porcine mucosa. Moreover, it was found that PF-127/Carb blend possesses penetration enhancer capability better than the Alg OX/HPMC combination. Flow cytometry studies demonstrated the uptake of viscous liquids incorporating fluorescent SLNs by human nasal RPMI 2650 cell in time-dependent manner. In conclusion, the SVD formulations may be considered promising alternatives to thermosensitive hydrogels strategy. Moreover, in a broader perspective, such SVD formulations may be also hopeful for treating various neurological diseases beyond PD treatment.
Subject(s)
Administration, Intranasal , Dopamine , Grape Seed Extract , Nanoparticles , Nasal Mucosa , Nanoparticles/chemistry , Grape Seed Extract/chemistry , Grape Seed Extract/administration & dosage , Animals , Viscosity , Swine , Dopamine/administration & dosage , Dopamine/chemistry , Nasal Mucosa/metabolism , Nasal Mucosa/drug effects , Humans , Poloxamer/chemistry , Drug Carriers/chemistry , Rheology , Polymers/chemistry , Lipids/chemistry , LiposomesABSTRACT
Vulvovaginal candidiasis, mostly caused by Candida albicans, remains a prevalent concern in women's health. Annona muricata L. (Annonaceae), a plant native from Brazil, is well-known for its therapeutic potential, including antitumor, anti-inflammatory, and antimicrobial properties. This study presents an innovative hydrogel formulation containing the ethanolic extract from A. muricata leaves designed to control C. albicans in an in vivo model of vulvovaginal candidiasis. Here, we report the development, thermal, physicochemical and rheological characterization of a Carbopol®-based hydrogel containing A. muricata extract. Furthermore, we evaluated its activity in a vulvovaginal candidiasis in vivo model. Thermal analyses indicated that the addition of the extract increased the polymer-polymer and polymer-solvent interactions.Rheological analysis showed a decrease in the viscosity and elasticity of the formulation as the A. muricata extract concentration increased, suggesting a liquid-like behavior. After treatment with the Carbopol®-based hydrogel with A. muricata, our in vivo results showed a significant reduction in vulvovaginal fungal burden and infection, as well as a reduction in mucosal inflammation. The current research opens up possibilities for the application of the Carbopol®-based hydrogel with A. muricata as a natural therapeutic option for the treatment of vulvovaginal candidiasis.
Subject(s)
Annona , Antifungal Agents , Candida albicans , Candidiasis, Vulvovaginal , Hydrogels , Plant Extracts , Plant Leaves , Annona/chemistry , Candidiasis, Vulvovaginal/drug therapy , Candidiasis, Vulvovaginal/microbiology , Antifungal Agents/pharmacology , Antifungal Agents/chemistry , Female , Plant Extracts/chemistry , Plant Extracts/pharmacology , Plant Leaves/chemistry , Hydrogels/chemistry , Hydrogels/pharmacology , Candida albicans/drug effects , Animals , Rheology , Microbial Sensitivity Tests , MiceABSTRACT
The goal of this investigation is to develop stable ophthalmic nanoformulations containing cannabidiol (CBD) and its analog cannabidiol-valine-hemisuccinate (CBD-VHS) for improved ocular delivery. Two nanoformulations, nanoemulsion (NE) and nanomicelles (NMC), were developed and evaluated for physicochemical characteristics, drug-excipient compatibility, sterilization, thermal analysis, surface morphology, ex-vivo transcorneal permeation, corneal deposition, and stability. The saturation solubility studies revealed that among the surfactants tested, Cremophor EL had the highest solubilizing capacity for CBD (23.3 ± 0.1 mg/mL) and CBD-VHS (11.2 ± 0.2 mg/mL). The globule size for the lead CBD formulations (NE and NMC) ranged between 205 and 270 nm while CBD-VHS-NMC formulation had a particle size of about 78 nm. The sterilized formulations, except for CBD-VHS-NMC at 40 °C, were stable for three months of storage (last time point tested). Release, in terms of CBD, in the in-vitro release/diffusion studies over 18 h, were faster from the CBD-VHS nanomicelles (38 %) compared to that from the CBD nanoemulsion (16 %) and nanomicelles (33 %). Transcorneal permeation studies revealed improvement in CBD permeability and flux with both formulations; however, a greater improvement was observed with the NMC formulation compared to the NE formulation. In conclusion, the nanoformulations prepared could serve as efficient topical ocular drug delivery platforms for CBD and its analog.
Subject(s)
Administration, Ophthalmic , Cannabidiol , Cornea , Drug Stability , Emulsions , Nanoparticles , Particle Size , Solubility , Cannabidiol/administration & dosage , Cannabidiol/chemistry , Cannabidiol/pharmacokinetics , Animals , Cornea/metabolism , Cornea/drug effects , Nanoparticles/chemistry , Rabbits , Micelles , Valine/analogs & derivatives , Valine/chemistry , Valine/administration & dosage , Valine/pharmacokinetics , Drug Liberation , Lipids/chemistry , Excipients/chemistry , Permeability , Chemistry, Pharmaceutical/methods , Drug Compounding/methods , Surface-Active Agents/chemistry , Ophthalmic Solutions/administration & dosageABSTRACT
A novel approach was devised to address the challenges in delivering cisplatin (CIS) for lung cancer treatment. This involved the development of a non-invasive hydrogel delivery system, aiming to minimize side effects associated with its administration. Using carbopol 971 (CP) and chitosan (CH) at varying ratios, the hydrogels were prepared and loaded with eco-friendly iron oxide nanoparticles (IONPs) conjugated to CIS. The physical properties, yield, drug loading, and cytotoxicity against lung cancer cell lines (A549) were assessed, along with hydrogel rheological properties and in vitro drug diffusion. Hydrogel A1 that composed of 1:1 of CP:CH hydrogel loaded with 100 mg IONPs and 250 µg CIS demonstrated distinctive properties that indicate its suitability for potential delivery. The loaded greenly synthesized IONPs@CIS exhibited a particle size of 23.0 nm, polydispersity index of 0.47, yield of 71.6%, with 88.28% drug loading. They displayed significant cytotoxicity (61.7%) against lung cancer cell lines (A549), surpassing free CIS cytotoxicity (28.1%). Moreover, they demonstrated shear-thinning behaviour, viscoelastic properties, and Fickian drug release profile over 24 h (flux 2.34 µg/cm2/h, and permeability 0.31 cm/h).
Subject(s)
Antineoplastic Agents , Cisplatin , Drug Liberation , Hydrogels , Humans , Cisplatin/pharmacology , Cisplatin/administration & dosage , Hydrogels/chemistry , Antineoplastic Agents/administration & dosage , Antineoplastic Agents/pharmacology , Antineoplastic Agents/chemistry , A549 Cells , Magnetic Iron Oxide Nanoparticles/chemistry , Drug Carriers/chemistry , Particle Size , Green Chemistry Technology/methods , Chitosan/chemistry , Lung Neoplasms/drug therapy , Cell Survival/drug effects , Drug Delivery Systems/methodsABSTRACT
The rhizome of Kaempferia galanga (Zingiberaceae) is extensively used in traditional medicine by utilizing its various biological activities. It has been proven that ethyl-para-methoxycinnamate (EPMC) and other polyphenolic compounds are present in considerable amounts in the ethanolic extract of K. galanga rhizome (EKG). Our previous study confirmed that a dose of 0.5-1% of EKG demonstrated anti-inflammatory activity and a wound-healing effect in chemical-induced oral mucosal ulcers of Wistar rats. Currently, there are no reports on the formulation of oral gel containing EKG, thus revealing the potential of EKG to be developed as a herbal oral gel for mucosal ulcers. This study aims to formulate the best mucoadhesive oral care gel containing EKG in terms of physical stability. The presence of EPMC and the total phenols in the best EKG gel were also determined. The results revealed that Carbopol 934 is the best gelling agent for EKG gel preparations as proven by its stability during 14 days of storage. The statistical analysis resulted in a significant difference between the physical stability of the Carbopol 934-based EKG gel preparation compared to three commercial oral care gel products (p < 0.05). RP-HPLC chromatograms indicated that EPMC was identified in Carbopol 934-based gels containing 5% and 10% EKG at 6.056 and 6.146 min, respectively, with polyphenol levels of 1201.2557 mg/kg and 1849.1506 mg/kg, respectively. The hedonic test performed on 30 respondents to measure the degree of consumer acceptance and satisfaction confirmed that 5% EKG gel is the most sensorially accepted by the respondents. Data were analyzed using paired t-tests, one-way ANOVA, and a Kruskal-Wallis test. Taken together, the Carbopol 934-based gel containing 5% EKG could potentially be further developed as a topical anti-oral mucosal ulcer drug for clinical purposes.
ABSTRACT
Basal cell carcinoma (BCC) is the most common form of human cancer, and treatment usually involves surgery, with alternative strategies being needed. We propose the use of carbopol hydrogels (HG) for topical administration of nanographene oxide (GOn) and partially-reduced nanographene oxide (p-rGOn) for photothermal therapy (PTT) of BCC. GOn and p-rGOn incorporated into the HG present lateral sizes â¼200 nm, being stable for 8 months. After 20 min irradiation with an infrared (IR) photothermal therapy lamp (15.70 mW cm-2), GOn-HG increased temperature to 44.7 °C, while p-rGOn-HG reached 47.0 °C. Human skin fibroblasts (HFF-1) cultured with both hydrogels (250 µg mL-1) maintained their morphology and viability. After 20 min IR irradiation, p-rGOn HG (250 µg mL-1) completely eradicated skin cancer cells (A-431). Ex vivo human skin permeability tests showed that the materials can successfully achieve therapeutic concentrations (250 µg mL-1) inside the skin, in 2.0 h for GO HG or 0.5 h for p-rGOn HG.
Subject(s)
Graphite , Skin Neoplasms , Humans , Graphite/pharmacology , Drug Compounding , Phototherapy , Skin Neoplasms/drug therapy , Hydrogels , Oxides , Cell Line, TumorABSTRACT
The purpose of this work was to develop a novel topical formulation of econazole nitrate based on gel that can be easily scaled up in one pot for the potential treatment of fungal and yeast infections. Econazole nitrate, a topical antifungal, is used to treat tinea versicolor, tinea pedis, and tinea cruris. Compared to applying cream or ointment, topical gels offer numerous advantages, one of which is that the drug is released more quickly to the intended site of action. A viscous mixture of propylene glycol, Capmul® MCM C8, methyl and propyl paraben, and econazole nitrate were mixed together before being formulated into the optimized Carbopol® gel bases. The gel's color, appearance, and homogeneity were assessed visually. For every formulation, the drug content, pH, viscosity, spreadability, and gel strength were characterized. The cup plate diffusion method was used to evaluate the anti-fungal activity of the prepared formulations. To assess the behavior of the developed system, studies on in vitro release and mechanism were conducted. The manufactured formulations were transparent, pale yellow, and exhibited excellent homogeneity. The pH of each formulation was roughly 6.0, making them suitable for topical use. The concentration of Carbopol® 940 resulted in a significant increase in viscosity and gel strength but a significant decrease in spreadability. It was demonstrated that the prepared formulations inhibited the growth of Candida albicans and Aspergillus fumigatus. In contrast, the standard blank gel showed no signs of antifungal action. By increasing the concentration of Carbopol® 940, the in vitro release profile of econazole nitrate significantly decreased. Following the Korsmeyer-Peppas model fitting, all formulations exhibited n values greater than 0.5 and less than 1, indicating that diffusion and gel swelling control econazole nitrate release.
ABSTRACT
Miconazole nitrate (MCNR) is a BCS class II antifungal drug with poor water solubility. Although numerous attempts have been made to increase its solubility, formulation researchers struggle with this significant issue. Transethosomes are promising novel nanocarriers for improving the solubility and penetration of drugs that are inadequately soluble and permeable. Thus, the objective of this study was to develop MCNR-loaded transethosomal gel in order to enhance skin permeation and antifungal activity. MCNR-loaded transethosomes (MCNR-TEs) were generated using the thin film hydration method and evaluated for their zeta potential, particle size, polydispersity index, and entrapment efficiency (EE%). SEM, FTIR, and DSC analyses were also done to characterize the optimized formulation of MCNR-TEs (MT-8). The optimized formulation of MCNR-TEs was incorporated into a carbopol 934 gel base to form transethosomal gel (MNTG) that was subjected to ex vivo permeation and drug release studies. In vitro antifungal activity was carried out against Candida albicans through the cup plate technique. An in vivo skin irritation test was also performed on Wistar albino rats. MT-8 displayed smooth spherical transethosomal nanoparticles with the highest EE% (89.93 ± 1.32%), lowest particle size (139.3 ± 1.14 nm), polydispersity index (0.188 ± 0.05), and zeta potential (-18.1 ± 0.10 mV). The release profile of MT-8 displayed an initial burst followed by sustained release, and the release data were best fitted with the Korsmeyer-Peppas model. MCNR-loaded transethosomal gel was stable and showed a non-Newtonian flow. It was found that ex vivo drug permeation of MNTG was 48.76%, which was significantly higher than that of MNPG (plain gel) (p ≤ 0.05) following a 24-h permeation study. The prepared MCNR transethosomal gel exhibited increased antifungal activity, and its safety was proven by the results of an in vivo skin irritation test. Therefore, the developed transethosomal gel can be a proficient drug delivery system via a topical route with enhanced antifungal activity and skin permeability.
ABSTRACT
BACKGROUND: Mometasone Furoate (MF) is a corticosteroid (glucocorticoid) used to treat eczema, psoriasis, allergies, and rash on the skin; also used to reduce itching, redness, and swelling (inflammation). It has been reported that the bioavailability of MF is less than 11% when given via the nasal route. Encapsulating the drug in niosomes can improve the active pharmaceutical ingredient's bioavailability by enhancing both physical and biological stability. OBJECTIVE: The goal of the study is to develop, a non-ionic surfactant-based vesicular system, by loading mometasone furoate, and introducing it into a gel-based formulation by utilizing an appropriate gelling agent, and performing its evaluation. METHODS: The niosome vesicle was prepared by vacuum rotary evaporation method (Thin film hydration method). Gel was prepared using the dispersion method and in-vitro drug diffusion studies using Franz-diffusion cells. RESULTS: According to the results of the experiments conducted for the study, Mometasone Furoate niosomal gel was prepared utilizing Mometasone Furoate niosomes that were made using the thin film hydration process, Cholesterol, and Span 60, and loaded in various amounts of Carbopol as a geling agent. The niosomes' zeta potential was found to be -24 mV, showing that the formulation is stable. The polydispersity index (PDI) was found to be 0.409 and the average size of niosomes to be 252.7 nm. The performance of the gel of the optimized formulations containing 2% Carbopol showed in vitro diffusion for 7 hours and an increased flux rate as compared to the plain MF. CONCLUSION: The experiments carried out during the study led to the conclusion that the thin-film hydration method was suitable for the formation of the MF-niosomes by using Span 60 and Cholesterol (2:1). The gel formulation containing 2% Carbopol indicated better in vitro diffusion following the Higuchi model across all niosomal gel formulations. Niosomal gel can be regarded as the best vesicular carrier for the efficient distribution of mometasone furoate via the transdermal route.
Subject(s)
Drug Carriers , Liposomes , Humans , Skin Absorption , Mometasone Furoate , Blister , CholesterolABSTRACT
This study presents the formulation and evaluation of an ABH Carbopol gel containing lorazepam (Ativan®), diphenhydramine hydrochloride (Benadryl®), and haloperidol (Haldol®) for treating chemotherapy-induced nausea and vomiting (CINV) in hospice patients. ABH PLO gel is widely used for this purpose due to its low cost and presumed efficacy. However, previous studies, including one conducted by the authors, have reported insufficient drug absorption from the ABH PLO gel. Here we hypothesized that the ABH Carbopol gel would provide superior percutaneous absorption of the drugs. ABH Carbopol gel was characterized for pH, viscosity, thermal properties, and infrared spectroscopy. The percutaneous absorption and skin retention of the gel was evaluated across porcine ear skin using Franz diffusion cells, and the drug concentrations were determined by high-performance liquid chromatography. The pH of the ABH Carbopol gel was found to be 6.80 ± 0.33, and the retention time of diphenhydramine, haloperidol, and lorazepam were 4.73, 7.11, and 18.69 minutes, respectively. The thermogram of the ABH Carbopol gel indicates the drugs were present in the dissolved state. Based on the flux data, the estimated steady-state concentration (Css) of diphenhydramine, haloperidol, and lorazepam were found to be 44.64 ng/ml, 2.58 ng/ml, and 20.1 ng/ml, respectively. These values were significantly higher than those obtained from the ABH PLO gel. In conclusion, the ABH Carbopol gel provides a promising alternative to the ABH PLO gel for treating CINV in hospice patients. Further studies are required to validate these findings in clinical settings.
Subject(s)
Haloperidol , Skin Absorption , Swine , Animals , Lorazepam , DiphenhydramineABSTRACT
BACKGROUND: Resistance to antimicrobial drugs as a result of prolonged use usually results in clinical failure, especially in wound infections. Development of effective antimicrobial therapeutics for the management of infected wounds from a natural source with improved therapeutic effects is a pressing need. OBJECTIVE: In this study, carbopol-mastic gum-based topical gels were loaded with silver nanoparticles in combination with either neem bark extract or carvacrol oil. The effect of combining silver nanoparticles with neem bark extract or the essential oil carvacrol in the prepared gel formulations was investigated on selected bacterial strains. METHOD: The prepared gels were characterised by Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM) and ultraviolet-visible (UV-vis) spectroscopy, followed by antimicrobial analysis against selected strains of bacteria. RESULTS: There was no interaction between the loaded natural extract or essential oil and the polymer used for the preparation of the formulations, which was visible from the FTIR spectra of the formulations. The gels were selective and effective against selected strains of bacteria. However, the combination of the silver nanoparticles with essential oil or natural extract in some of the gel formulations rendered the formulation ineffective against some of the bacterial strains. CONCLUSION: The gel formulations were effective against bacterial strains such as Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Enterococcus faecalis which are the common causes of wound infections. Incorporation of silver nanoparticles into the topical formulations with natural extracts is usually a good approach to overcome antibiotic-resistant infections. However, the combination of antibacterial agents must be managed carefully.
Subject(s)
Azadirachta , Metal Nanoparticles , Oils, Volatile , Humans , Mastic Resin , Metal Nanoparticles/therapeutic use , Silver/pharmacology , Silver/therapeutic use , Plant Bark , Anti-Bacterial Agents/pharmacology , Escherichia coli , Gels , Oils, Volatile/pharmacology , Oils, Volatile/therapeutic use , Plant Extracts/pharmacologyABSTRACT
Sunburn is caused by prolonged exposure to ultraviolet (UV) rays from the sun, resulting in redness of the skin as well as tenderness, swelling, and blistering issues. During the healing process, it can cause peeling, irritation, and some long-term effects, including premature aging, pigmentation, and a high risk of skin cancer. Rutin has antioxidant and anti-inflammatory effects, which could potentially reduce inflammation and soothe sunburned skin. The objective of the current proposal is to develop and create carbopol gel-encased glycerosomes for the treatment of sunburn. The Design of Expert (DoE) technique was used to optimize the proposed formulation and was subjected to various characterization parameters such as nanovesicles size, polydispersity index (PDI), surface charge, entrapment efficiency (EE), and surface morphology. The optimized rutin-loaded glycerosomes (opt-RUT-loaded-GMs) were further characterised for drug release, 2,2-Diphenyl-1-picrylhydrazyl (DPPH) assay, and confocal laser scanning microscopy (CLSM). The formulation showed sustained release, greater permeation into the skin, and good antioxidant activity. The dermatokinetic study of opt-RUT-loaded-GMs confirms that the Rutin hydrate had better retention in the epidermis as compared to the dermis, owing to its potential for long lasting protection after topical application. It was observed that the prepared formulation was stable, highly safe, and had good sun protection factor (SPF) values that could be used as a suitable option for topical drug administration to maximize the therapeutic efficacy of the drugs.
ABSTRACT
Six different composites of epoxy resin and Carbopol 974p polymer were prepared based on Carbopol 974p polymer concentrations of 0%, 5%, 10%, 15%, 20%, and 25%. The linear and mass attenuation coefficients, Half Value Layer (HVL), and mean free path (MFP) of these composites were determined using single-beam photon transmission in the energy range between 16.65 keV and 25.21 keV. This was carried out by determining the attenuation of ka1 X-ray fluorescent (XRF) photons from niobium, molybdenum, palladium, silver, and tin targets. The results were compared with theoretical values of three types of breast material (Breast 1, Breast 2, Breast 3) and Perspex, which was calculated using a XCOM computer program. The results show that there were no significant differences in the attenuation coefficient values after the consequent Carbopol additions. Moreover, it was found that the mass attenuation coefficients of all tested composites were close to those of Perspex and the values for Breast 3. The HVL and MFP results showed that the E25 sample is closer to the results of the Perspex material with differences of (0.53-1.15%) and (0.51-1.20%), respectively. In addition, the densities of the fabricated samples were in the range of 1.102-1.170 g/cm3, which is in the range of human breast density. A computed tomography (CT) scanner was used to investigate the CT number values for the fabricated samples. The CT numbers of all samples were in the range of human breast tissue (24.53-40.28 HU). Based on these findings, the fabricated epoxy-Carbopol polymer is a good candidate for use as a breast phantom material.
ABSTRACT
BACKGROUND: Nanocarriers for antibacterial drugs became hopeful tools against the increasing resistance of bacteria to antibiotics. This work focuses on a comprehensive study of the applicability and therapeutic suitability of dermal carbopol-based hydrogels containing chloramphenicol carried by various nanoparticles (AuNPs and SiNPs). METHODS: The different forms of carbopol-based drugs for dermal use were obtained. Five different concentrations of chloramphenicol and two types of nanoparticles (silica and gold) in carbopol-based ointments were tested. The influence of different carbopol formulations with nanocarriers on the rheological properties as well as the release profile of active substances and bacteriostatic activity on five reference strains were determined. RESULTS: The properties of the obtained hydrogels were compared to a commercial formulation, and finally it was possible to obtain a formulation that allowed improved antimicrobial activity over a commercially available detreomycin ointment while reducing the concentration of the antibiotic. CONCLUSION: The work indicates that it is possible to reduce the concentration of chloramphenicol by four times while maintaining its bacteriostatic activity, which can improve the patient's safety profile while increasing the effectiveness of the therapy.
Subject(s)
Metal Nanoparticles , Nanoparticles , Humans , Anti-Bacterial Agents/pharmacology , Chloramphenicol/pharmacology , Hydrogels , GoldABSTRACT
Prevalence of oral infections in diabetic patients is a health challenge due to persistent hyperglycemia. However, despite great concerns, limited treatment options are available. We therefore aimed to develop nanoemulsion gel (NEG) for oral bacterial infections based on essential oils. Clove and cinnamon essential oils based nanoemulgel were prepared and characterized. Various physicochemical parameters of optimized formulation including viscosity (65311 mPa·S), spreadability (36 g·cm/s), and mucoadhesive strength 42.87 N/cm2) were within prescribed limits. The drug contents of the NEG were 94.38 ± 1.12% (cinnamaldehyde) and 92.96 ± 2.08% (clove oil). A significant concentration of clove (73.9%) and cinnamon essential oil (71.2 %) was released from a polymer matrix of the NEG till 24 h. The ex vivo goat buccal mucosa permeation profile revealed a significant (52.7-54.2%) permeation of major constituents which occurred after 24 h. When subjected to antimicrobial testing, significant inhibition was observed for several clinical strains, namely Staphylococcus aureus (19 mm), Staphylococcus epidermidis (19 mm), and Pseudomonas aeruginosa (4 mm), as well as against Bacillus chungangensis (2 mm), whereas no inhibition was detected for Bacillus paramycoides and Paenibacillus dendritiformis when NEG was utilized. Likewise promising antifungal (Candida albicans) and antiquorum sensing activities were observed. It was therefore concluded that cinnamon and clove oil-based NEG formulation presented significant antibacterial-, antifungal, and antiquorum sensing activities.