Development and evaluation of a colorimetric LAMP based-assay targeting the Bacteroides HF183 marker for tracking sewage pollution in environmental waters.

Surface waters are vulnerable to contamination by human and animal feces, posing risks to human health due to potential exposure to enteric pathogens. This research developed a colorimetric loop-mediated isothermal amplification (cLAMP) assay to detect sewage associated Bacteroides dorei HF183/BacR287 (HF183) marker in wastewater and environmental water samples. The host sensitivity and host specificity of the assay were evaluated, and their performance was compared to the Bacteroides HF183 qPCR assay using control materials (gBlocks), environmental water samples seeded with untreated sewage, and ambient environmental water samples. In serial dilutions of control materials, qPCR produced quantifiable data across all dilutions, while cLAMP detected the marker down to 0.001 pg/µL of control materials, which was two orders of magnitude less sensitive than qPCR. All untreated sewage samples (n = 12) tested positive for HF183 by both the qPCR and cLAMP assays, demonstrating a host sensitivity value of 1.00 (maximum value of 1.00). The host specificity by analysing 70 non-human fecal nucleic acid samples revealed cLAMP's specificity value of 0.81 compared to qPCR's 0.64. When testing sewage-seeded environmental water samples, both methods detected HF183 for the lowest amount of sewage, indicating similar detection sensitivity. The application of cLAMP for tracking sewage pollution in environmental waters showed promising results, with moderate agreement between cLAMP and qPCR (κ = 0.510). However, cLAMP occasionally missed detections compared to qPCR, particularly in low-concentration samples. Overall, the cLAMP HF183 assay demonstrated promising potential as a rapid and sensitive method for detecting sewage pollution, offering a viable alternative to qPCR in certain environmental monitoring scenarios.

Automated Optic Nerve Head Hemoglobin Measurements versus General Ophthalmologists Evaluation to Differentiate Glaucomatous from Large Physiological Cupping: A Diagnostic Performance Comparative Study.

Purpose: The aim of this study is to compare the diagnostic performance in differentiating patients with glaucoma from those with presumed large physiological optic disc cupping (LPC), using optic nerve head hemoglobin levels (ONH Hb), as a screening method, versus the evaluation of general ophthalmologists. Patients and Methods: Twenty general ophthalmologists evaluated PowerPoint images of 40 patients with glaucoma and 40 presenting LPC. Presentation of patient's exams were distributed as follows: Group 1 (GI): color retinography (CR), Group 2 (GII): CR + visual field (VF), Group 3 (GIII): CR + optical coherence tomography (OCT), Group 4 (GIV): CR + VF + OCT. The Laguna ONhE software was used to estimate ONH Hb based on CR. Main outcomes were the comparison of sensitivity and accuracy between general ophthalmologists' evaluation and the glaucoma discriminant function (GDF) index from Laguna ONhE and also the agreement between examiners (Kappa statistics). Results: Laguna ONhE GDF index demonstrated higher sensitivity values (GI- 90%; GII-90%; GIII-100%; GIV-100%) comparing to all groups (GI-59%; GII-86.5%; GIII-86.5%; GIV-68.5%). In GI, in which it was observed the worst accuracy result (64.8%), we found 75% for GDF. In GII, the accuracy was 81.3% and we found 55% for GDF. The highest agreement was in GII (Kappa=0.63; 95% CI=0.53-0.72), and the lowest in GI (Kappa=0.30; 95% CI=0.20-0.39). Conclusion: Laguna ONhE software, a low-cost and non-invasive method, showed good sensitivity and great utility as a screening method in differentiating patients with glaucoma from those with LPC, compared with evaluation of general ophthalmologists.

Improved sensitivity in paper-based microfluidic analytical devices using a pH-responsive valve for nitrate analysis.

This paper presents an innovative application of chitosan material to be used as pH-responsive valves for the precise control of lateral flow in microfluidic paper-based analytical devices (µPADs). The fabrication of µPADs involved wax printing, while pH-responsive valves were created using a solution of chitosan in acetic acid. The valve-forming solution was applied, and ready when dry; by exposure to acidic solutions, the valve opens. Remarkably, the valves exhibited excellent compatibility with alkaline, neutral, and acidic solutions with a pH higher than 4. The valve opening process had no impact on the flow rate and colorimetric analysis. The potential of chitosan valves used for flow control was demonstrated for µPADs employed for nitrate determination. Valves were used to increase the conversion time of nitrate to nitrite, which was further analyzed using the Griess reaction. The µPAD showed a linear response in the concentration range of 10-100 µmol L-1, with a detection limit of 5.4 µmol L-1. As a proof of concept, the assay was successfully applied to detect nitrate levels in water samples from artificial lakes of recreational parks. For analyses that require controlled kinetics and involve multiple sequential steps, the use of chitosan pH-responsive valves in µPADs is extremely valuable. This breakthrough holds great potential for the development of simple and high-impact microfluidic platforms that can cater to a wide range of analytical chemistry applications.

Smartphone-Based Rapid Quantitative Detection Platform with Imprinted Polymer for Pb (II) Detection in Real Samples.

This paper reports the successful development and application of an efficient method for quantifying Pb2+ in aqueous samples using a smartphone-based colorimetric device with an imprinted polymer (IIP). The IIP was synthesized by modifying the previous study; using rhodizonate, 2-acrylamido-2-methylpropane sulfonic acid (AMPS), N,N'-methylenebisacrylamide (MBA), and potassium persulfate (KPS). The polymers were then characterized. An absorption study was performed to determine the optimal conditions for the smartphone-based colorimetric device processing. The device consists of a black box (10 × 10 × 10 cm), which was designed to ensure repeatability of the image acquisition. The methodology involved the use of a smartphone camera to capture images of IIP previously exposed at Pb2+ solutions with various concentrations, and color channel values were calculated (RGB, YMK HSVI). PLS multivariate regression was performed, and the optimum working range (0-10 mg L-1) was determined using seven principal components with a detection limit (LOD) of 0.215 mg L-1 and R2 = 0.998. The applicability of a colorimetric sensor in real samples showed a coefficient of variation (% RSD) of less than 9%, and inductively coupled plasma mass spectrometry (ICP-MS) was applied as the reference method. These results confirmed that the quantitation smartphone-based colorimetric sensor is a suitable analytical tool for reliable on-site Pb2+ monitoring.

Colorimetric detection of the potent carcinogen aflatoxin B1 based on the aggregation of L-lysine-functionalized gold nanoparticles in the presence of copper ions.

L-lysine functionalized gold nanoparticles (AuNPs-Lys) have been widely used for the detection of worldwide interest analytes. In this work, a colorimetric assay for the detection of the carcinogen aflatoxin B1 (AFB1) based on the aggregation of AuNPs-Lys in the presence of copper ions was developed. For this purpose, AuNPs were synthesized in citrate aqueous solution, functionalized, and further characterized by UV-Vis, fluorescence, Fourier transform infrared spectroscopy (FTIR), nanoparticle tracking analysis (NTA), dynamic light scattering (DLS), and transmission electron microscopy (TEM). In general, AuNPS-Lys (~2.73 × 1011 particles) offered a clear colorimetric response in the presence of AFB1 and Cu2+ ions showing linearity in the range of 6.25 to 200 ng AFB1/mL, with a detection limit of 4.18 ng AFB1/mL via photometric inspection. Moreover, the performance of the proposed methodology was tested using the 991.31 AOAC official procedure based on monoclonal antibodies in maize samples artificially contaminated with AFB1. There was a good agreement between the measured AFB1 concentrations in both assays, the average recoveries for the colorimetric and immunoaffinity assays were between 91.2-98.4% and 96.0-99.2%, respectively. These results indicated that the colorimetric assay could be used as a rapid, eco-friendly, and cost-effective platform for the quantification of AFB1 in maize-based products.

Rapid colorimetric polymyxin B microelution directly from positive blood bottles: because patients with serious infections should not have to wait for results of culture-based methodologies.

PURPOSE: To evaluate the performance of the rapid colorimetric polymyxin B microelution (RCPEm) in determining polymyxin B resistance directly from Enterobacterales-positive blood cultures. METHODS: A set volume of positive blood culture bottles (diluted 1:10) was inoculated into a glucose-broth-phenol red solution (NP solution), where a polymyxin B disk was previously eluted (final concentration of 3 µg/mL). Test was read each 1 h for up to 4 h. Color change from red/orange to yellow indicated resistant isolates. Results were compared to the reference method, broth microdilution (BMD), performed from colonies grown on solid media from the same blood culture bottle. RESULTS: One hundred fifty-two Enterobacterales-positive blood cultures were evaluated, 22.4% (34/152) of them resistant to polymyxin B (including 6.6% with borderline MICs). When performing directly from positive blood cultures (RCPEm-BC), specificity and sensitivity were 99.1% and 94.1%, respectively. Of note, 79.4% (27/34) of truly resistant isolates required 3 h of incubation, compared to the 18 ± 2 h incubation that microtiter plates of BMD demand before reading can be performed. CONCLUSIONS: RCPEm directly from blood cultures has great potential to be part of the routine of clinical microbiology laboratories to establish polymyxin B susceptibility, impacting outcome of patients with bloodstream infections caused by carbapenem-resistant Enterobacterales.

Silver Nanoparticles: Multifunctional Tool in Environmental Water Remediation.

Water pollution is a worldwide environmental and health problem that requires the development of sustainable, efficient, and accessible technologies. Nanotechnology is a very attractive alternative in environmental remediation processes due to the multiple properties that are conferred on a material when it is at the nanometric scale. This present review focuses on the understanding of the structure-physicochemical properties-performance relationships of silver nanoparticles, with the objective of guiding the selection of physicochemical properties that promote greater performance and are key factors in their use as antibacterial agents, surface modifiers, colorimetric sensors, signal amplifiers, and plasmonic photocatalysts. Silver nanoparticles with a size of less than 10 nm, morphology with a high percentage of reactive facets {111}, and positive surface charge improve the interaction of the nanoparticles with bacterial cells and induce a greater antibacterial effect. Adsorbent materials functionalized with an optimal concentration of silver nanoparticles increase their contact area and enhance adsorbent capacity. The use of stabilizing agents in silver nanoparticles promotes selective adsorption of contaminants by modifying the surface charge and type of active sites in an adsorbent material, in addition to inducing selective complexation and providing stability in their use as colorimetric sensors. Silver nanoparticles with complex morphologies allow the formation of hot spots or chemical or electromagnetic bonds between substrate and analyte, promoting a greater amplification factor. Controlled doping with nanoparticles in photocatalytic materials produces improvements in their electronic structural properties, promotes changes in charge transfer and bandgap, and improves and expands their photocatalytic properties. Silver nanoparticles have potential use as a tool in water remediation, where by selecting appropriate physicochemical properties for each application, their performance and efficiency are improved.

Development and evaluation of a lyophilization protocol for colorimetric RT-LAMP diagnostic assay for COVID-19.

Molecular diagnostics involving nucleic acids (DNA and RNA) are regarded as extremely functional tools. During the 2020 global health crisis, efforts intensified to optimize the production and delivery of molecular diagnostic kits for detecting SARS-CoV-2. During this period, RT-LAMP emerged as a significant focus. However, the thermolability of the reagents used in this technique necessitates special low-temperature infrastructure for transport, storage, and conservation. These requirements limit distribution capacity and necessitate cost-increasing adaptations. Consequently, this report details the development of a lyophilization protocol for reagents in a colorimetric RT-LAMP diagnostic kit to detect SARS-CoV-2, facilitating room-temperature transport and storage. We conducted tests to identify the ideal excipients that maintain the molecular integrity of the reagents and ensure their stability during room-temperature storage and transport. The optimal condition identified involved adding 5% PEG 8000 and 75 mM trehalose to the RT-LAMP reaction, which enabled stability at room temperature for up to 28 days and yielded an analytical and diagnostic sensitivity and specificity of 83.33% and 90%, respectively, for detecting SARS-CoV-2. This study presents the results of a lyophilized colorimetric RT-LAMP COVID-19 detection assay with diagnostic sensitivity and specificity comparable to RT-qPCR, particularly in samples with high viral load.

Transparent, flexible, and eco-friendly starch-based films for reversible optoelectronic noses for food spoilage monitoring in smart packaging.

A reversible optoelectronic nose is presented consisting of ten acid-base indicators incorporated into a starch-based film, covering a wide pH range. The starch substrate is odorless, biocompatible, flexible, and exhibits high tensile resistance. This optical artificial olfaction system was used to detect the early stages of food decomposition by exposing it to the volatile compounds produced during the spoialge process of three food products (beef, chicken, and pork). A smartphone was used to capture the color changes caused by intermolecular interactions between each dye and the emitted volatiles over time. Digital images were processed to generate a differential color map, which uses the observed color shifts to create a unique signature for each food product. To effectively discriminate among different samples and exposure times, we employed chemometric tools, including hierarchical cluster analysis (HCA) and principal component analysis (PCA). This approach detects food deterioration in a practical, cost-effective, and user-friendly manner, making it suitable for smart packaging. Additionally, the use of starch-based films in the food industry is preferable due to their biocompatibility and biodegradability characteristics.

Comparative Study of Colorimetric In Situ Hybridization and Quantitative Real-Time Polymerase Chain Reaction for Diagnosis of Infection by Leishmania infantum in Dogs in Formalin-Fixed and Paraffin-Embedded Skin.

The zoonotic visceral leishmaniasis is caused by the protozoan Leishmania infantum and dogs are reservoirs for this parasite. For the diagnosis of Leishmania at the species level in dogs in formalin-fixed, paraffin-embedded skin (FFPES) samples, colorimetric in situ hybridization (CISH) and quantitative real-time polymerase chain reaction (qPCR) are options, but their sensitivities are not well established. Therefore, the aim of this study was to determine the sensitivity of these two techniques in FFPES for the diagnosis of the L. infantum infection in dogs using culture as the reference standard. The FFPES of 48 dogs with cutaneous infection by L. infantum confirmed by culture and by multilocus enzyme electrophoresis were examined by CISH and qPCR using specific probes for L. infantum. The sensitivities of qPCR, CISH and their combination were, respectively, 77.0%, 58.0% and 83.3%. The sensitivities of qPCR in dogs with and without clinical signs were, respectively, 74.2% and 82.4%. The sensitivities of CISH in dogs with and without clinical signs were, respectively, 61.3% and 52.9%. The CISH and qPCR showed satisfactory sensitivities for the diagnosis of L. infantum in the FFPES of dogs, even in dogs without clinical signs, and their combination increases the sensitivity for this diagnosis.

Colorimetric Indicator Based on Gold Nanoparticles and Sodium Alginate for Monitoring Fish Spoilage.

In this work, a colorimetric indicator based on gold nanoparticles (AuNP) and a biodegradable and eco-friendly polymer (sodium alginate, Alg.), was developed for the real-time detection of fish spoilage products. The AuNPs and the colorimetric indicator were characterized using UV-VIS, FTIR spectroscopies, TGA, DSC, XRD, TEM, and colorimetry. The UV-VIS spectrum and TEM showed the successful synthesis, the spherical shape, and the size of AuNPs. The results indicated color changes of the indicator in packaged fish on day 9 of storage at a refrigerated temperature (5 °C. These results showed the successful application of the colorimetric indicator in the detection of TVB-N in packaged fish.

Development of a Low-Cost Artificial Vision System as an Alternative for the Automatic Classification of Persian Lemon: Prototype Test Simulation.

In the present research work, an algorithm of artificial neural network (ANN) has been developed based on the processing of digital images of Persian lemons with the aim of optimizing the quality control of the product. For this purpose, the physical properties (weight, thickness of the peel, diameter, length, and color) of 90 lemons selected from the company Esperanza de San José Ornelas SPR de RL (Jalisco, Mexico) were studied, which were divided into three groups (Category "extra", Category I, and Category II) according to their characteristics. The parameters of weight (26.50 ± 3.00 g), diameter/length (0.92 ± 0.08) and thickness of the peel (1.50 ± 0.29 mm) did not present significant differences between groups. On the other hand, the color (determined by the RGB and HSV models) presents statistically significant changes between groups. Due to the above, the proposed ANN correctly classifies 96.60% of the data obtained for each of the groups studied. Once the ANN was trained, its application was tested in an automatic classification process. For this purpose, a prototype based on the operation of a stepper motor was simulated using Simulink from Matlab, which is connected to three ideal switches powered by three variable pulse generators that receive the information from an ANN and provide the corresponding signal for the motor to turn to a specific position. Manual classification is a process that requires expert personnel and is prone to human error. The scientific development presented shows an alternative for the automation of the process using low-cost computational tools as a potential alternative.

Cocrystals Enhance Biopharmaceutical and Antimicrobial Properties of Norfloxacin.

A solvate cocrystal of the antimicrobial norfloxacin (NFX) was formed by using isonicotinamide (INA) as a coformer with the solvent evaporation technique. The cocrystal formation was confirmed by performing solid-state characterization techniques. We evaluated the dissolution under supersaturated conditions and also the solubility at the vertex of triphasic domain of cocrystal and NFX in both water and Fasted-State Simulated Intestinal Fluid (FaSSIF). The antimicrobial activity was evaluated using the microdilution technique. The cocrystal showed 1.8 times higher dissolution than NFX in water at 60 min and 1.3 times higher in FaSSIF at 180 min in the kinetic study. The cocrystal also had an increase in solubility of 8.38 times in water and 6.41 times in FaSSIF. The biopharmaceutical properties of NFX with cocrystallization improved antimicrobial action, as shown in the results of minimum inhibitory concentration (MIC) and inhibitory concentrations of 50% (IC50%) and 90% (IC90%). This paper presents, for the first time, a more in-depth analysis of the cocrystal of NFX-INA concerning its dissolution, solubility, and antimicrobial activity. In all these criteria, the cocrystal obtained better results compared to the pure drug.

Detection of polymyxins resistance among Enterobacterales: evaluation of available methods and proposal of a new rapid and feasible methodology.

BACKGROUND: Fast and accurate detection of polymyxins resistance is necessary as they remain the last resources to treat infections caused by Carbapenem-resistant Enterobacterales in many regions. We evaluated the rapid colorimetric polymyxin B elution (RCPE) and developed its miniaturized version, RCPE microelution (RCPEm), aiming to detect polymyxins resistance among Enterobacterales. METHODS: The methodologies consist of exposing the bacterial population in a solution (NP solution) where polymyxin B disks were previously eluted to obtain a concentration of 2 µg/mL for RCPE and 3 µg/mL for RCPEm. RESULTS: Two hundred sixty-seven Enterobacterales were evaluated, 90 (33.7%) resistant to polymyxin B by broth microdilution. It was observed 0.6% of major error (ME) by RCPE, with a specificity of 99.4%. The miniaturized version (RCPEm) presented the same ME and specificity values, but slightly higher sensitivity (97.8% vs. 95.6%) with 2.2% of very major error (VME). CONCLUSIONS: RCPE and RCPEm proved to be useful alternatives to determine polymyxin B susceptibility in clinical microbiology laboratories, presenting low cost, being easy to perform, and demanding short incubation time.

Using a Smartphone-Based Colorimetric Device with Molecularly Imprinted Polymer for the Quantification of Tartrazine in Soda Drinks.

The present study reports the development and application of a rapid, low-cost in-situ method for the quantification of tartrazine in carbonated beverages using a smartphone-based colorimetric device with molecularly imprinted polymer (MIP). The MIP was synthesized using the free radical precipitation method with acrylamide (AC) as the functional monomer, N,N'-methylenebisacrylamide (NMBA) as the cross linker, and potassium persulfate (KPS) as radical initiator. The smartphone (RadesPhone)-operated rapid analysis device proposed in this study has dimensions of 10 × 10 × 15 cm and is illuminated internally by light emitting diode (LED) lights with intensity of 170 lux. The analytical methodology involved the use of a smartphone camera to capture images of MIP at various tartrazine concentrations, and the subsequent application of the Image-J software to calculate the red, green, blue (RGB) color values and hue, saturation, value (HSV) values from these images. A multivariate calibration analysis of tartrazine in the range of 0 to 30 mg/L was performed, and the optimum working range was determined to be 0 to 20 mg/L using five principal components and a limit of detection (LOD) of 1.2 mg/L was obtained. Repeatability analysis of tartrazine solutions with concentrations of 4, 8, and 15 mg/L (n = 10) showed a coefficient of variation (% RSD) of less than 6%. The proposed technique was applied to the analysis of five Peruvian soda drinks and the results were compared with the UHPLC reference method. The proposed technique showed a relative error between 6% and 16% and % RSD lower than 6.3%. The results of this study demonstrate that the smartphone-based device is a suitable analytical tool that offers an on-site, cost-effective, and rapid alternative for the quantification of tartrazine in soda drinks. This color analysis device can be used in other molecularly imprinted polymer systems and offers a wide range of possibilities for the detection and quantification of compounds in various industrial and environmental matrices that generate a color change in the MIP matrix.

Specific identification of Mycobacterium bovis by Loop-Mediated Isothermal Amplification (LAMP) targeting the Region of Difference 12 (RD12) of the M. tuberculosis complex.

Bovine tuberculosis is a prevalent zoonotic disease that causes high risks for production animals, dairy producers and consumers, together with significant economic losses. Thus, methods for easy, fast and specific detection of Mycobacterium bovis in small and medium-sized livestock under field conditions are very required. In this work, a Loop-Mediated Isothermal Amplification LAMP-PCR targeting the Region of Difference 12 (RD12) of M. bovis genome was designed for the purpose of identification. A set of six primers designed for the isothermal amplification of five different genomic fragments led to the specific identification of M. bovis from other mycobacterial species. A basic colorimetric reaction was clearly observed at first sight under natural light, indicating positive identification of M. bovis in a maximum of 30 min of isothermal amplification at 65 °C. The limit of detection was near 50 fg of M. bovis genomic DNA, corresponding approximately to 10 copies of the genome. •The proposed LAMP-PCR amplification of M. bovis genomic DNA might be performed by untrained laboratory personnel.•Specific identification of M. bovis LAMP is possible in 30 min at 65.. C using a simple water bath.•The basic colorimetric reaction for M. bovis identification could be observed with the naked eye under natural light.

Anthocyanin-rich black carrot (Daucus carota ssp. sativus var. atrorubens Alef.) and red cabbage (Brassica oleracea) extracts incorporated biosensor for colorimetric detection of Helicobacter pylori with color image processing.

In this work, we developed novel colorimetric biosensors consisting of anthocyanin-rich either black carrot (Daucus carota ssp. sativus var. atrorubens Alef.) or red cabbage (Brassica oleracea) extracts for rapid, sensitive, and economic detection of Helicobacter pylori (H. pylori). We comparatively prepared two test solutions as biosensors including anthocyanin-rich black carrot extract (Anth@BCE) and red cabbage extract (Anth@RCE), both of which fixed to pH 2.5 and investigated their colorimetric responses based on electronic structure and electron density of anthocyanins. We successfully used anthocyanin-rich BCE and RCE as natural pH indicators in detection of H. pylori and introduced their advantages like non-toxicity, easy accessibility, and high stability compared to synthetic indicators. The BCE and RCE tests gave the best color change in the presence of 103 CFU/mL (at 60 min) and 104 CFU/mL (at 75 min) H. pylori suspensions prepared in an artificial gastric fluid. The limit of detection was down to 10 CFU/mL for RCE and BCE tests by increasing incubation time (≥ 5 h). We further made an additional study that color differences in the colorimetric responses observed by naked eyes were supported by digital image processing with RGB (Red Green Blue) and Delta-E (ΔE) analysis. It is confirmed that results evaluated by naked eyes and digital image processing are well consistent with each other. These findings proposed that these colorimetric tests can be implemented to pH dependent detection of various microorganisms and can be effectively transferred from laboratory work to clinics in the near future.

Molecular test for COVID-19 diagnosis based on a colorimetric genomagnetic assay.

The world is in a long pandemic period caused by the SARS-CoV-2 virus and massive diagnostic tests to assist efforts to control the spread of the disease and also to avoid new coronavirus variants are still needed. Herein, we propose a simple and accurate saliva-based colorimetric test for the diagnosis of COVID-19. Magnetic beads (MBs) modified with a sequence of single-strand DNA (ssDNA) complementary to the N gene of the SARS-CoV-2 RNA were developed and used for magnetic capture and separation from a complex saliva sample. A second biotinylated ssDNA sequence was applied, and the colorimetric detection was carried out by adding streptavidin-horseradish peroxidase conjugate, H2O2, and tetramethylbenzidine (TMB) as chromogenic substrate. The test does not require viral RNA isolation, transcription, or amplification steps and can be performed at room temperature. The molecular assay test can be run using 96-well microplates, allowing the diagnosis of a large number of samples in 90 min. A simple support for magnets was designed and constructed using a 3D printer that allows the magnetic separations directly in the 96-well microplate. The colorimetric test showed an excellent ability to discriminate between healthy individuals and patients infected with SARS-CoV-2, with 92% and 100% of clinical sensitivity and specificity, respectively. This performance was similar to that achieved using the gold standard RT-PCR technique. The proposed genomagnetic assay offers an opportunity to greatly increase population testing, contribute to controlling the spread of the virus, and improve health equity in testing for COVID-19.

Clinical Validation of a Colorimetric Loop-Mediated Isothermal Amplification Using a Portable Device for the Rapid Detection of SARS-CoV-2.

Quick and reliable mass testing of infected people is an effective tool for the contingency of SARS-CoV-2. During the COVID-19 pandemic, Point-of-Care (POC) tests using Loop-Mediated Isothermal Amplification (LAMP) arose as a useful diagnostic tool. LAMP tests are a robust and fast alternative to Polymerase Chain Reaction (PCR), and their isothermal property allows easy incorporation into POC platforms. The main drawback of using colorimetric LAMP is the reported short-term stability of the pre-mixed reagents, as well as the relatively high rate of false-positive results. Also, low-magnitude amplification can produce a subtle color change, making it difficult to discern a positive reaction. This paper presents Hilab Molecular, a portable device that uses the Internet of Things and Artificial Intelligence to pre-analyze colorimetric data. In addition, we established manufacturing procedures to increase the stability of colorimetric RT-LAMP tests. We show that ready-to-use reactions can be stored for up to 120 days at -20 °C. Furthermore, we validated both the Hilab Molecular device and the Hilab RT-LAMP test for SARS-CoV-2 using 581 patient samples without any purification steps. We achieved a sensitivity of 92.93% and specificity of 99.42% (samples with CT ≤ 30) when compared to RT-qPCR.

Digital microfluidic platform assembled into a home-made studio for sample preparation and colorimetric sensing of S-nitrosocysteine.

Digital microfluidics (DMF) is a versatile lab-on-a-chip platform that allows integration with several types of sensors and detection techniques, including colorimetric sensors. Here, we propose, for the first time, the integration of DMF chips into a mini studio containing a 3D-printed holder with previously fixed UV-LEDs to promote sample degradation on the chip surface before a complete analytical procedure involving reagent mixture, colorimetric reaction, and detection through a webcam integrated on the equipment. As a proof-of-concept, the feasibility of the integrated system was successfully through the indirect analysis of S-nitrosocysteine (CySNO) in biological samples. For this purpose, UV-LEDs were explored to perform the photolytic cleavage of CySNO, thus generating nitrite and subproducts directly on DMF chip. Nitrite was then colorimetrically detected based on a modified Griess reaction, in which reagents were prepared through a programable movement of droplets on DMF devices. The assembling and the experimental parameters were optimized, and the proposed integration exhibited a satisfactory correlation with the results acquired using a desktop scanner. Under the optimal experimental conditions, the obtained CySNO degradation to nitrite was 96%. Considering the analytical parameters, the proposed approach revealed linear behavior in the CySNO concentration range between 12.5 and 400 µmol L-1 and a limit of detection equal to 2.8 µmol L-1. Synthetic serum and human plasma samples were successfully analyzed, and the achieved results did not statistically differ from the data recorded by spectrophotometry at the confidence level of 95%, thus indicating the huge potential of the integration between DMF and mini studio to promote complete analysis of lowmolecular weight compounds.