Influence of Chitosan on the Viability of Encapsulated and Dehydrated Formulations of Vegetative Cells of Actinomycetes.

This study focuses on developing an encapsulated and dehydrated formulation of vegetative actinobacteria cells for an efficient application in sustainable agriculture, both as a fungicidal agent in crop protection and as a growth-stimulating agent in plants. Three strains of actinobacteria were used: one from a collection (Streptomyces sp.) and two natives to agricultural soil, which were identified as S3 and S6. Vegetative cells propagated in a specific liquid medium for mycelium production were encapsulated in various alginate-chitosan composites produced by extrusion. Optimal conditions for cell encapsulation were determined, and cell damage from air-drying at room temperature was evaluated. The fresh and dehydrated composites were characterized by porosity, functional groups, size and shape, and their ability to protect the immobilized vegetative cells' viability. Actinomycetes were immobilized in capsules of 2.1-2.7 mm diameter with a sphericity index ranging from 0.058 to 0.112. Encapsulation efficiency ranged from 50% to 88%, and cell viability after drying varied between 44% and 96%, depending on the composite type, strain, and airflow. Among the three immobilized and dried strains, S3 and S6 showed greater resistance to encapsulation and drying with a 4 L·min-1 airflow when immobilized in coated and core-shell composites. Encapsulation in alginate-chitosan matrices effectively protects vegetative actinobacteria cells during dehydration, maintaining their viability and functionality for agricultural applications.

Morphological, Thermal, and Mechanical Assessment of Polypropylene and Ammonium Phosphate Composites Enhanced with Lignosulfonate and Zirconium.

Polypropylene and ammonium phosphate (AP) composites were synthesized at a 25 wt% concentration. The changes in the morphological, thermal, and physical behavior of the composites were analyzed with the addition of lignosulfonate (LG) and zirconium phosphate (ZrP). Additionally, metallic zirconium was deposited onto lignosulfonate using the magnetron sputtering technique to develop polypropylene and zirconium-modified lignosulfonate (LGMod) composites. Thus, composites of PP/25AP, PP/25AP/8LG/5ZrP, and PP/25AP/8LGMod were synthesized. The synthesis involved mixing the materials in a Hake mixer, followed by compression molding. The composites were characterized by field emission scanning electron microscopy (SEM-EDS), a thermogravimetric analysis (TGA) with combustion parameters, a vertical burn test (UL-94), a thermal camera, and mechanical properties. All composites achieved a V2 rating according to UL-94 standards. The PP/25AP extinguishes flames more quickly compared to other materials, approximately 99.2% faster than PP and showed the lowest temperature variation and mass loss after burning. The PP/25AP/8LG/5ZrP composite exhibited a 7% higher rigidity and 84.5% better flame retardancy compared to pure PP. Additionally, substituting ZrP with LGMod led to a lower environmental impact and improved thermal properties, despite some mechanical disadvantages.

A bibliometric review on applications of lignocellulosic fibers in polymeric and hybrid composites: Trends and perspectives.

Over the past 10 years, materials science and engineering have shown increasing interest in incorporating lignocellulosic fibers into polymer and hybrid composites (LCF-CPH). This bibliometric analysis, covering the period 2012 to 2022, examines the current state of research on the application of these fibers in composites, with the aim of identifying significant contributions, new trends, and possible future directions. The analysis included a comprehensive database search using specific criteria, which revealed a significant increase in research activity on a variety of lignocellulosic fibers, such as flax, jute, hemp and sisal. This growth is particularly evident in the packaging, automotive, aerospace and construction industries. Hybrid composites based on these fibers have gained prominence due to their enhanced properties, which include improvements in mechanical, thermal and environmental characteristics. The findings of this research have significant implications for governments, corporations, and academic institutions. Researchers gain a deeper understanding of emerging trends, industry gains valuable insights into the advantages of adopting lignocellulosic fibers, and policymakers gain essential information to support the development of sustainable composites. In the field of advanced composites and sustainable materials, this work lays a solid foundation for future research and industrial applications.

Composites formed by layered double hydroxides with inorganic compounds: An overview of the synthesis methods and characteristics.

Nowadays, layered double hydroxides (LDH), sometimes referred as hydrotalcite-like compounds, have gained great attention since their composition and structure can be easily modified, so that they can be implemented in multiple fields. LDH-based composite materials based on LDH exhibit tremendously improved properties such as high specific surface area, which promotes the accessibility to a greater number of LDH active sites, considerably improving their catalytic, adsorbent and biological activities. Therefore, this review summarizes and discusses the synthesis methods of composites constituted by LDH with other inorganic compounds such as zeolites, cationic clays, hydroxyapatites, among many others, and describe the resulting characteristics of the resulting composites, emphasizing the morphology. Brief descriptions of their properties and applications are also included.

Bioactive Properties and In Vitro Digestive Release of Cannabidiol (CBD) from Tailored Composites Based on Carbon Materials.

The use of carriers to improve cannabidiol (CBD) bioavailability during digestion is at the forefront of research. The main objective of this research was to evaluate CBD bioactivity and develop CBD composites based on tailored carbon support to improve availability under digestive conditions. The antioxidant capacity of CBD was evaluated using spectrophotometric methods, and anti-proliferative assays were carried out using human colon carcinoma cells (SW480). Twenty-four composites of CBD + carbon supports were developed, and CBD desorption tests were carried out under simulated digestive conditions. The antioxidant capacity of CBD was comparable to and superior to Butylhydrox-ytoluene (BHT), a commercial antioxidant. CBD reflected an IC-50 of 10,000 mg/L against SW480 cancer cells. CBD in biological systems can increase the shelf life of lipid and protein foods by 7 and 470 days, respectively. Finally, acid carbons showed major CBD adsorption related to electrostatic interactions, but basic carbons showed better delivery properties related to electrostatic repulsion. A tailored composite was achieved with a CBD load of 27 mg/g with the capacity to deliver 1.1 mg, 21.8 mg, and 4 mg to the mouth, stomach, and duodenum during 18 h, respectively. This is a pioneering study since the carriers were intelligently developed to improve CBD release.

Brazilian bentonite/MgO composites for adsorption of cationic and anionic dyes.

Industrial effluents, especially those containing dyes, have become the main cause of contamination of water resources. In this context, Brazilian bentonite/MgO composites, with excellent adsorptive properties, were prepared and investigated for their effectiveness in removing cationic and anionic dyes from aqueous solutions. The new adsorbents were obtained using Brazilian bentonites and MgO using the mechanochemical method followed by heat treatment (at 700 °C for 4 h). Different characterization techniques were used for the chemical, mineralogical, thermal, surface, and morphological analysis of the raw clays and the composites. The experimental adsorption isotherms were quantified under different conditions of initial concentration, contact time, pH, adsorbent dosage, and temperature variation to interpret the adsorption mechanism of the crystal violet (CV) and Congo red (CR) dyes. The modeling results were obtained from the empirical Sips equation and Pseudo Second Order (PSO) kinetics, indicating that the adsorption of molecules is a heterogeneous phenomenon that occurs in a monolayer on the surface (ns > 1), with the adsorption rate determined by chemisorption. The composites showed the best removal efficiency performance compared to the raw bentonites, with an increase of 12% for the CV dye and 46% for the CR dye. In addition, the qmax values obtained were 423.02 mg/g and 479.86 mg/g (AM01). This research underscores the potential of Brazilian bentonite/MgO composites as a promising solution for the removal of cationic and anionic dyes from water, offering hope for future applications in the field of environmental engineering and materials science.

Analysis of micropolar elastic multi-laminated composite and its application to bioceramic materials for bone reconstruction.

The asymptotic homogenization method is applied to characterize the effective behaviour of periodic multi-laminated micropolar elastic heterogeneous composites under perfect contact conditions. The local problem formulations and the analytical expressions for the effective stiffness and torque coefficients are derived for the centrosymmetric case. One of the main findings in this work is the analysis of the rotations effect of the layers' constitutive properties on the mechanical response of bi-laminated composites. The effects of microstructure and interfacial interactions on the composite's mechanical behaviour are captured through the independent effective moduli. Comparisons with the classical elastic case show the approach validation. Some numerical examples are shown. Furthermore, considering the micropolar media's prevalence in bio-inspired systems, the model's applicability is evaluated for reconstructing bone fractures using multi-laminated biocomposites. An important finding in this bio-inspired simulation is related to the analysis of a periodic bi-laminated micropolar composite whose isotropic constituents are a bioceramic material and a compact bone. This artificial bio-inspired material should integrate with host tissue to support cell growth and be stable and compatible. These characteristics are crucial in the enhancement of the fractured bone.

Marginal integrity and physicomechanical properties of a thermoviscous and regular bulk-fill resin composites.

OBJECTIVES: To evaluate the marginal integrity (MI%) and to characterize specific properties of a thermoviscous bulk-fill resin composite, two regular bulk-fill resin composites, and a non-bulk-fill resin composite. MATERIALS AND METHODS: VisCalor bulk (VBF), Filtek One Bulk Fill (OBF), and Aura Bulk Fill (ABF) were evaluated. Filtek Z250 XT (ZXT) was used as non-bulk-fill control. MI% was evaluated in standardized cylindrical cavities restored with the composites by using a 3D laser confocal microscope. The following properties were characterized: volumetric polymerization shrinkage (VS%), polymerization shrinkage stress (Pss), degree of conversion (DC%), microhardness (KHN), flexural strength (FS), and elastic modulus (EM). Data were analyzed by one-way and two-way ANOVA, and Tukey HSD post-hoc test (α = 0.05). RESULTS: VBF presented the highest MI% and the lowest VS% and Pss (p < 0.05). DC% ranged from 59.4% (OBF) to 71.0% (ZXT). ZXT and VBF presented similar and highest KHN than OBF and ABF (p < 0.05). ABF presented the lowest FS (p < 0.05). EM ranged from 5.5 GPa to 7.7 GPa, with the values of ZXT and VBF being similar and statistically higher than those of OBF and ABF (p < 0.05). CONCLUSIONS: Thermoviscous technology employed by VisCalor bulk was able to improve its mechanical behavior comparatively to regular bulk-fill resin composites and to contribute to a better marginal integrity in restorations built up in cylindrical cavities with similar geometry to a class I cavity as well. Although presenting overall better physicomechanical properties, Z250 XT presented the worst MI%. CLINICAL RELEVANCE: The marginal integrity, which is pivotal for the success of resin composite restorations, could be improved using VisCalor bulk-fill. The worst MI% presented by Z250 XT reinforces that non-bulk-fill resin composites shall not be bulk-inserted in the cavity to be restored.

Eco-Friendly Electrosynthesis of Cu-PANI-Pencil Composite: Enhanced Their Current Value, Acid Sensing, Click Chemistry and Turn On-Off Sunlight Photo-Catalytical H2O2 Activation.

In this contribution, we report a straightforwardly and easily one-step synthesis of a small family of composites based in polyaniline grafted on HB2 graphite (PANI@UG) and their copper-doped derivatives (Cu50PANI@UG5-6). The PANI@UG composites were synthesized through electrochemical polymerization using cyclic voltammetry (CV) in three different acidic media: i) acetic acid (AcOH) at high and low concentration (12 and 1 M, using KCl as electrolytic support); ii) a mixture of AcOH and sulfuric acid (H2SO4, which have two roles: as electrolytic support and proton source) and iii) a mixture of acetonitrile (NCCH3) and H2SO4, under atmospheric conditions. Once the best conditions were achieved, our next step was focused on obtaining the Cu50PANI@UG5-6 composites using a solution of aniline and CuSO4 (50 mM) in AcOH:H2SO4 and NCCH3:H2SO4 solutions, respectively. All composites were characterized by CV, FT-IR, SEM and MALDI-TOF experiments. So, the current value was enhanced for the Cu50PANI@UG6 composite, which have three potential catalytical applications in: i) HClO4 acid sensing, ii) click chemistry and iii) sunlight drive photo-activation of H2O2.

Effect of Different Compatibilizers on the Properties of Green Low-Density Polyethylene Composites Reinforced with Bambusa Vulgaris Bamboo Fibers.

Low-density green polyethylene (LDGPE) composites reinforced with 5 wt% of bamboo fiber and 3 wt% of a compatibilizing agent (polyethylene grafted with maleic anhydride and tannin) were processed through extrusion and injection molding. Bamboo fiber, Bambusa Vulgaris, was characterized using Fourier-transform infrared spectroscopy (FTIR). The molded specimens were analyzed for their thermal, mechanical, and morphological properties. The estimated concentration was chosen to provide the best mechanical strength to the material studied. FTIR analysis of the fibers revealed the presence of groups characteristic of bamboo fiber and tannin. Differential scanning calorimetry revealed that both compatibilizing agents increased the matrix's degree of crystallinity. However, scanning electron microscopy (SEM) showed that, despite the presence of compatibilizing agents, there was no significant improvement in adhesion between the bamboo fibers and LDGPE.

The Development of Biocomposite Filaments for 3D Printing by Utilizing a Polylactic Acid (PLA) Polymer Matrix Reinforced with Cocoa Husk Cellulose Fibers.

Vegetable fibers are increasingly used in biocomposites, but there is a need for further development in utilizing by-products like cocoa husks. Three-dimensional printing, through Fused Filament Fabrication (FFF), is advancing rapidly and may be of great interest for applying biocomposite materials. This study focuses on developing innovative and fully biodegradable filaments for the FFF process. PLA filaments were prepared using cellulose fibers derived from cocoa husks (5% mass ratio). One set of filaments incorporated fibers from untreated husks (UCFFs), while another set utilized fibers from chemically treated husks (TCFFs). The fabricated materials were analyzed using scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and Fourier transform infrared (FTIR) techniques, and they were also tested for tensile strength. ANOVA reveals that both UCFFs and TCFFs significantly predict tensile strength, with the UCFFs demonstrating an impressive R2 value of 0.9981. The optimal tensile strength for the filament test specimens was 16.05 MPa for TCFF8 and 13.58 MPa for UCFF8, utilizing the same printing parameters: 70% infill and a layer thickness of 0.10 mm. Additionally, there was an 18% improvement in the tensile strength of the printed specimens using the filaments filled with chemically treated cocoa husk fibers compared to the filaments with untreated fibers.

Natural Aging of Reprocessed Polypropylene Composites Filled with Sustainable Corn Fibers.

Natural fiber reinforcements have the potential to enhance mechanical properties, thereby improving performance and durability in various applications. In this study, we comprehensively evaluated the impact of environmental degradation over 120 days on reprocessed polypropylene (PP) reinforced with corn husk fiber (CHF) composites. The manufactured systems underwent rigorous analysis using various techniques, including Fourier transform infrared spectroscopy, thermogravimetric analysis, optical microscopy, scanning electron microscopy, and tensile testing. These analyses revealed that climatic conditions significantly influenced (p < 0.05) the mechanical properties of all systems. Photodegradation led to surface morphological changes and chemical structures. Regardless, adding CHF filler proved a key factor, as it allowed for less susceptibility to environmental degradation than the reprocessed matrix. These findings, therefore, provide robust evidence supporting the feasibility of using CHF composites for manufacturing agricultural containers.

A Circular Bioeconomy Approach to Using Post-Bioadsorbent Materials Intended for the Removal of Domestic Wastewater Contaminants as Potential Reinforcements.

Agro-industrial residue valorization under the umbrella of the circular bioeconomy (CBE) has prompted the search for further forward-thinking alternatives that encourage the mitigation of the industry's environmental footprint. From this perspective, second-life valorization (viz., thermoplastic composites) has been explored for agro-industrial waste (viz., oil palm empty fruit bunch fibers, OPEFBFs) that has already been used previously in other circular applications (viz., the removal of domestic wastewater contaminants). Particularly, this ongoing study evaluated the performance of raw residues (R-OPEFBFs) within three different size ranges (250-425, 425-600, 600-800 µm) both before and after their utilization in biofiltration processes (as post-adsorbents, P-OPEFBFs) to reinforce a polymer matrix of acrylic resin. The research examined the changes in R-OPEFBF composition and morphology caused by microorganisms in the biofilters and their impact on the mechanical properties of the composites. Smaller R-OPEFBFs (250-425 µm) demonstrated superior mechanical performance. Additionally, the composites with P-OPEFBFs displayed significant enhancements in their mechanical properties (3.9-40.3%) compared to those with R-OPEFBFs. The combination of the three fiber sizes improved the mechanical behavior of the composites, indicating the potential for both R-OPEFBFs and P-OPEFBFs as reinforcement materials in composite applications.

Pyroclastic Dust from Arequipa-Peru Decorated with Iron Oxide Nanoparticles and Their Ecotoxicological Properties in Water Flea D. magna.

A novel magnetic composite made of Peruvian pyroclastic dust material decorated with maghemite nanoparticles was synthesized and characterized using a variety of analytic techniques. The 13 nm maghemite nanoparticles were grown on the pyroclastic dust using the conventional coprecipitation chemical route. A short-term acute assay was developed to study the ecotoxicological behavior of the water flea, Daphnia magna. A 24 h-lethal concentration (LC50) value equal to 123.6 mg L-1 was determined only for the magnetic composite. While the pyroclastic dust material did not exhibit a lethal concentration, it caused morphologically significant changes (p < 0.05) for heart and tail parameters at high concentrations. Morphologies exposed to the magnetic composite above the 24 h-LC50 revealed less tolerance and significant changes in the body, heart, antenna, and eye. Hence, it affects biomarker growth and swimming. The reproduction rate was not affected by the raw pyroclastic dust material. However, the number of individuals showed a decrease with increasing composite concentrations. The present study indicates the LC50 value, which can be used as a reference concentration for in-situ water cleaning with this material without damaging or changing the Daphnia magna ecosystem.

A Review of Natural Fiber-Reinforced Composites for Lower-Limb Prosthetic Designs.

This paper presents a comprehensive review of natural fiber-reinforced composites (NFRCs) for lower-limb prosthetic designs. It covers the characteristics, types, and properties of natural fiber-reinforced composites as well as their advantages and drawbacks in prosthetic designs. This review also discusses successful prosthetic designs that incorporate NFRCs and the factors that make them effective. Additionally, this study explores the use of computational biomechanical models to evaluate the effectiveness of prosthetic devices and the key factors that are considered. Overall, this document provides a valuable resource for anyone interested in using NFRCs for lower-limb prosthetic designs.

Bovine hydroxyapatite/3Y-TZP bioceramic: Aligning 3Y-TZP content with sintering parameters.

This study aimed to produces and characterize bovine hydroxyapatite (HA) bioceramic with 3Y-TZP addition and analyze different sintering curves. HA was extracted from bovine bones and nanoparticulated. HA discs (0, 1, 5 and 10 wt% 3Y-TZP) were subjected to uniaxial and isostatic pressing. Dilatometry analysis was performed and the groups were sintered using 3 different firing curves (conventional, 1300 °C; 2-step, 1292 °C; 2-step, 1420 °C). The samples were analyzed by X-ray diffraction (XRD), biaxial flexural strength (BFS), Vickers microhardness (VH) and Field emission scanning electron microscopy (FE-SEM). The dilatometry results signaled the need for sintering optimization in groups added with 3Y-TZP. XRD demonstrated the characteristic crystallographic peaks of HA in the pure groups and with 1% 3Y-TZP, and decomposition of HA into ß-TCP and formation of calcium zirconate in the groups with 5 and 10% 3Y-TZP. Considering each composition, the groups of pure HA (131.3 ± 13.5 MPa; 401 ± 12.7 GPa) sintered by the conventional curve and HA+1%3Y-TZP (145 ± 8.6 MPa; 507 ± 47.9 GPa), HA+5%3Y-TZP (68.1 ± 14.2 MPa; 183 ± 9.8 GPa) and HA+10%3Y-TZP (55.6 ± 5.1 MPa; 96.1 ± 7.64 GPa) sintered by the 2-step curve at 1420 °C, combined the best BFS and VH results. The addition of 1 wt% 3Y-TZP and optimization in the sintering process improved the mechanical and microstructural properties of HA bioceramics and maintenance of its crystalline characteristics. Refinement in material processing is necessary for the future use of this bioceramic in dentistry.

Impact of accelerated aging cycles on the performance of extruded cement-based composites reinforced with non-bleached eucalyptus fibers.

Thermo-mechanical pulping produces well-individualized fibers compared to wood particles and less fragile fibers compared to Kraft pulping, besides presenting higher volume, higher yield, and lower production cost, which can be an exciting alternative for the fiber-cement industries. This study evaluated the impact of soak and dry-aging cycles on the performance of extruded composites reinforced with non-bleached eucalyptus fibers. The cement matrix comprised cement (70%) and limestone (30%). Composites were reinforced with 1 to 5% of eucalyptus fiber by cement mass and tested on the 28th day of cure at 99% relative humidity and after 400 accelerated aging cycles. The water absorption and apparent porosity gradually increased with the reinforcement level. Composites with 4 and 5% fibers showed the highest toughness (0.21 and 0.23 kJ/m2, respectively). The aging by 400 soak-dry cycles reduced the composites' water absorption and apparent porosity. The modulus of elasticity (MOE), rupture (MOR), and toughness increased, except for toughness for composites reinforced with 1 and 5% fibers, explained by the cementitious matrix's continuous hydration, fiber mineralization, and natural carbonation. In general, eucalyptus thermo-mechanical fibers were suitable for producing cementitious composites. Cementitious composites with 3% fibers presented a higher MOR, MOE, low water absorption, and apparent porosity after 400 accelerated aging cycles. In addition, the composites with 4% fibers also presented remarkable improvements in these properties. The aging cycles did not result in composites with less resistance, a positive fact for their application as tiles and materials for external use in civil construction.

Biobased Composites of Poly(Lactic Acid) Melt Compounded with Bacterial and Vegetal Nanocelluloses Incorporated through Different Strategies.

In the current contribution, bacterial nanocellulose obtained from a by-product of Kombucha tea production and vegetal nanocellulose isolated from milled rice husks were employed as fillers of PLA-based composites prepared by intensive mixing followed by compression molding. Given the challenges associated with the incorporation of nanocelluloses-initially obtained as aqueous suspensions-into melt compounding processes, and also with achieving a proper dispersion of the hydrophilic nanofillers within PLA, three different nanofibrils incorporation strategies were studied: i.e., direct mixing of dried milled nanocelluloses and PLA; masterbatching by solvent casting of native nanocelluloses followed by melt compounding; and masterbatching by solvent casting of acetylated nanocelluloses followed by melt compounding. Composites with varying filler content (from 0.5 wt.% to 7 wt.%) were characterized in terms of morphology, optical properties, and mechanical performance. Results revealed the relative suitability of each strategy employed to promote nanocelluloses dispersion within the PLA matrix. PLA/nanocellulose masterbatches prepared by solvent casting proved to be particularly useful for feeding the nanocelluloses into the processing equipment in a dry state with limited hornification. Acetylation also contributed to a better dispersion of both nanocelluloses within the PLA matrix, although no clear positive impact on the mechanical properties of the films was observed. Finally, filler loading played an important role in the films' properties by increasing their stiffness while reducing their translucency.

Effect of Water Absorption and Stacking Sequences on the Tensile Properties and Damage Mechanisms of Hybrid Polyester/Glass/Jute Composites.

The aim of this work is to analyze the effect of water absorption on the mechanical properties and damage mechanisms of polyester/glass fiber/jute fiber hybrid composites obtained using the compression molding and vacuum-assisted resin transfer molding (VARTM) techniques with different stacking sequences. For this purpose, the mechanical behavior under tensile stress of the samples was evaluated before and after hygrothermal aging at different temperatures: TA, 50 °C, and 70 °C for a period of 696 h. The damage mechanism after the mechanical tests was evaluated using SEM analysis. The results showed a tendency for the mechanical properties of the composites to decrease with exposure to an aqueous ambient, regardless of the molding technique used to conform the composites. It was also observed that the stacking sequence had no significant influence on the dry composites. However, exposure to the aqueous ambient led to a reduction in mechanical properties, both for the molding technique and the stacking sequence. Damage such as delamination, fiber pull-out, fiber/matrix detachment, voids, and matrix removal were observed in the composites in the SEM analyses.

Era of bast fibers-based polymer composites for replacement of man-made fibers.

Bast fibers are defined as those obtained from the outer cell layers of the bast of various plant families. They are finding use in textile applications and are widely used as reinforcements for green composites, as bast fibers are perceived as "sustainable". There is a growing demand for bast fibers across the world due to their renewable and biodegradable nature. The bast fibers are mainly composed of cellulose, which potentially considers the growing techniques, harvesting and extraction processes of bast fibers most used to produce fibers with appropriate quality to apply in the daily lives of modern men and women in contemporary society. This review paper looks at many aspects of natural fibers, with a focus on plant bast fibers, including their impact on prehistoric and historical society. This review shows that bast fibers are competitive compared to man-made fibers in many applications, but variability in mechanical properties and low tenacity may limit their use in high-strengthh composites and extend to, particularly in aerospace, automotive, packaging, building industries, insulation, E-composites (Eco composites), geotextiles and many other applications are currently being explored. Considering, important characteristics of bast fibers include physical, mechanical, and chemical properties. This makes bast fibers one of the most important classes of plant fibers to use as reinforcing agents in thermosetting/thermoplastic polymer matrices. And the effect of bast fibers as reinforcement in the properties of ECO-composites, GREEN-composites, BIO-composites, lightweight composites. Bast fibers play an important role in sustainability, the preservation of the health of the environment, the well-being of the next generation, and even the daily lives of men and women in the contemporary world.