An approach to manufacturing well-being milk chocolate in partial replacement of lecithin by the functional plant-based combination.

Lecithin is constituted of a glycerophospholipid mixture and is abundantly used as an emulsifying agent in various food applications including chocolate production. However, overconsumption of lecithin may create an adverse effect on human health. Thus, this study aims to replace the lecithin with plant-based gums. Different ratios of guar and arabic gum (25%-75%) and their blend (25%-75%) were employed as partial replacement of lecithin. Milk chocolate prepared using 40% guar gum (60GGL [guar gum, lecithin]), 25% arabic gum (75AGL [arabic gum, lecithin]), and a blend of 15 arabic gum and 10 guar gum (65AGGL [arabic gum, guar gum, lecithin]) showed similar rheological behavior as compared to control chocolate (100% lecithin). The fat content of 65AGGL (37.85%) was significantly lower than that of the control sample (43.37%). Rheological behavior exhibited shear-thinning behavior and samples (60GGL-75GGL-80GGL, 65AGL-75AGL, and 65AGGL-75AGGL) showed similar rheological properties as compared to control. The chocolate samples (60GGL and 65AGGL) showed significantly (p < .05) higher hardness values (86.01 and 83.55 N) than the control (79.95 N). As well, gum-added chocolates exhibited higher thermal stability up to 660°C as compared to the control sample. The Fourier transform infrared spectroscopy (FTIR) analysis revealed predominant ß-(1 → 4) and ß-(1 → 6) glycosidic linkages of the gums and lecithin. Sensory evaluation revealed a comparable score of gum-added milk chocolate in comparison to control samples in terms of taste, texture, color, and overall acceptance. Thus, plant exudate gums could be an excellent alternative to lecithin in milk chocolate, which can enhance the textural properties and shelf life.

Burton's Line on the Gum Seen in Lead Poisoning Among Petroleum Refinery Workers in Kirkuk City, Iraq: A Case Series.

Lead poisoning is a serious occupational health risk, especially for those who work in fields where lead-containing products are frequently exposed, including petroleum refining. Three cases of lead poisoning among employees of the petroleum refinery in Kirkuk City, Iraq, have been presented in this case series, emphasizing the clinical significance of Burton's line (blue-purplish line or gingival pigmentation) on the gums as an indication of lead toxicity. Patients presented with typical gingival margin darkening along with symptoms like fatigue, headaches, abdominal pain, and neurological impairments. Subsequent laboratory analysis confirmed that all three patients had increased blood lead levels, which ranged from 30 to 43 µg/dL (normal range <10 µg/dL). In the process of refining petroleum, lead can be inhaled, ingested, or come into direct touch with lead-containing items. Burton's line identification is essential for prompt diagnosis and intervention. This case series highlights the importance of taking preventative action to lessen the risks of lead exposure and protect the well-being and safety of employees of petroleum refineries. Healthcare providers should be vigilant, and strict safety protocols, worker education, and regular monitoring are all essential.

A review of soybean processing byproducts and their use in swine and poultry diets.

Due to its importance in animal feed, soybean meal has been extensively studied to optimize its use in livestock diets. Despite extensive research, the industry has not fully characterized specific areas of soybean processing such as the inclusion of soybean byproducts added back to soybean meal during processing. Soybean processing byproducts can encompass a large variety of materials including weeds and foreign material, soybean hulls, gums, soapstocks, lecithins, spent bleaching clays, and deodorizer distillates. Despite the potential for being added back to soybean meal when a crushing plant is integrated with an oil refinery, there is currently limited information on the composition of many of these soybean processing byproducts and their subsequent effects on soybean meal quality and animal performance. Therefore, there may be opportunities for a new area of research focused on soybean processing byproducts and their optimal use within the livestock feed industry. This review summarizes the current information on soybean byproducts with a focus on identifying the areas with the greatest potential for future research in swine and poultry nutrition.

In-situ biosynthesized plant exudate gums­silver nanocomposites as corrosion inhibitors for mild steel in hydrochloric acid medium.

Natural gums due to availability, multifunctionality, and nontoxicity are multifaceted in application. In corrosion inhibition applications, their performance, in unmodified form is unsatisfactory because of high hydration rate, solubility issues, algal and microbial contamination, as well as thermal instability. This work attempts to enhance the inhibitive performance of Berlinia grandiflora (BEG) and cashew (CEG) exudate gums through various modification approaches. The potential of biogenic BEG and CEG gums-silver (Ag) nanocomposites (NCPs) for corrosion inhibition of mild steel in 1 M HCl is studied. The nanocomposites were characterized using the FTIR, UV-vis, and TEM techniques. The corrosion studies through the gravimetric and electrochemical (PDP, EIS, LPR, and EFM) analyses reveal moderate inhibition performance by the nanocomposites. Furthermore, the PDP results reveal that both inhibitors are mixed-type with maximum corrosion inhibition efficiencies (IEs) of 61.2 % and 54.2 % for BEG-Ag NCP and CEG-Ag NCP, respectively at an optimum concentration of 1.0 %. Modification of these inhibitors with iodide ion (KI) significantly increased the IE values to 90.1 % and 88.5 % for BEG-Ag NCP and CEG-Ag NCP at the same concentration. Surface observation of the uninhibited and inhibited steel samples using SEM/EDAX, 3D Surface profilometer, and AFM affirm that the modified nanocomposites are highly effective.

Personalized nutrition with 3D-printed foods: A systematic review on the impact of different additives.

Three-dimensional (3D) printing is one of the world's top novel technologies in the food industry due to the production of food in different conditions and places (restaurants, homes, catering, schools, for dysphagia patients, and astronauts' food) and the production of personalized food. Nowadays, 3D printers are used in the main food industries, including meat, dairy, cereals, fruits, and vegetables, and have been able to produce successfully on a small scale. However, due to the expansion of this technology, it has challenges such as high-scale production, selection of printable food, formulation optimization, and food production according to the consumer's opinion. Food additives (gums, enzymes, proteins, starches, polyphenols, spices, probiotics, algae, edible insects, oils, salts, vitamins, flavors, and by-products) are one of the main components of the formulation that can be effective in food production according to the consumer's attitude. Food additives can have the highest impact on textural and sensory characteristics, which can be effective in improving consumer attitudes and reducing food neophobia. Most of the 3D-printed food cannot be printed without the presence of hydrocolloids, because the proper flow of the selected formulation is one of the key factors in improving the quality of the printed product. Functional additives such as probiotics can be useful for specific purposes and functional food production. Food personalization for specific diseases with 3D printing technology requires a change in the formulation, which is closely related to the selection of correct food additives. For example, the production of 3D-printed plant-based steaks is not possible without the presence of additives, or the production of food for dysphagia patients is possible in many cases by adding hydrocolloids. In general, additives can improve the textural, rheological, nutritional, and sensory characteristics of 3D printed foods; so, investigating the mechanism of the additives on all the characteristics of the printed product can provide a wide perspective for industrial production and future studies.

Recent advances in modifications of exudate gums: Functional properties and applications.

Gums are high-molecular-weight compounds with hydrophobic or hydrophilic characteristics, which are mainly comprised of complex carbohydrates called polysaccharides, often associated with proteins and minerals. Various innovative modification techniques are utilized, including ultrasound-assisted and microwave-assisted techniques, enzymatic alterations, electrospinning, irradiation, and amalgamation process. These methods advance the process, reducing processing times and energy consumption while maintaining the quality of the modified gums. Enzymes like xanthan lyases, xanthanase, and cellulase can selectively modify exudate gums, altering their structure to enhance their properties. This precise enzymatic approach allows for the use of exudate gums for specific applications. Exudate gums have been employed in nanotechnology applications through techniques like electrospinning. This enables the production of nanoparticles and nanofibers with improved properties, making them suitable for the drug delivery system, tissue engineering, active and intelligient food packaging. The resulting modified exudate gums exhibit improved rheological, emulsifying, gelling, and other functional properties, which expand their potential applications. This paper discusses novel applications of these modified gums in the pharmaceutical, food, and industrial sectors. The ever-evolving field presents diverse opportunities for sustainable innovation across these sectors.

Assessment of Oral Masticatory Muscle Activity With Different Chewing Gums: A Cross-Sectional Study Based on Electromyogram Analysis.

BACKGROUND: Facial muscles, particularly those involved in mastication, play a pivotal role in the chewing process. Despite their influence on chewing, these muscles undergo alterations during mastication. Examining the relationship between chewed substances and muscle activity can provide insights into various pathological processes and aid in the development of therapeutic chewing techniques. AIM: This study aimed to evaluate the impact of different commercially available chewing gums on the activity of key masticatory muscles. METHOD: Twenty-two participants were recruited for the study. They were instructed to chew four commercially available gums: group 1 comprised sugar gum with a strong flavor; group 2 included gum containing sorbitol; group 3 consisted of gum containing xylitol; and group 4 provided sugar gum with a mild flavor. Electromyogram (EMG) recordings were utilized to assess muscle activity. Various aspects of muscle activity, including chewing time, maximum muscle potential, and coordination between different muscles, were evaluated. Data tabulation and analysis were performed using IBM SPSS software version 23.0 (IBM Corp., Armonk, NY). RESULT: Analysis revealed that in terms of temporalis symmetry, group 2 exhibited the highest mean deviation, while for masseter symmetry, group 3 demonstrated the highest mean deviation. The total deviation for the temporalis and masseter muscles was 72.16% and 65.55%, respectively, indicating greater symmetry in the temporalis muscle. Additionally, group 3 displayed the highest mean deviation in both left and right-sided synergic activity of the muscles. The total deviation for the right and left sides was 64.34% and 65.67%, respectively. CONCLUSION: The findings suggest that sugar-free chewing gums elicit increased muscle activity compared to sugar-containing chewing gums. Furthermore, the utilization of calorie-free chewing gums with a firm texture was associated with better-coordinated muscle activity. These results provide valuable insights into the effects of different chewing gums on masticatory muscle function and coordination, which may have implications for therapeutic interventions and oral health management.

Gums as Macromolecular Crowding Agents in Human Skin Fibroblast Cultures.

Even though tissue-engineered medicines are under intense academic, clinical, and commercial investigation, only a handful of products have been commercialised, primarily due to the costs associated with their prolonged manufacturing. While macromolecular crowding has been shown to enhance and accelerate extracellular matrix deposition in eukaryotic cell culture, possibly offering a solution in this procrastinating tissue-engineered medicine development, there is still no widely accepted macromolecular crowding agent. With these in mind, we herein assessed the potential of gum Arabic, gum gellan, gum karaya, and gum xanthan as macromolecular crowding agents in WS1 skin fibroblast cultures (no macromolecular crowding and carrageenan were used as a control). Dynamic light scattering analysis revealed that all macromolecules had negative charge and were polydispersed. None of the macromolecules affected basic cellular function. At day 7 (the longest time point assessed), gel electrophoresis analysis revealed that all macromolecules significantly increased collagen type I deposition in comparison to the non-macromolecular crowding group. Also at day 7, immunofluorescence analysis revealed that carrageenan; the 50 µg/mL, 75 µg/mL, and 100 µg/mL gum gellan; and the 500 µg/mL and 1000 µg/mL gum xanthan significantly increased both collagen type I and collagen type III deposition and only carrageenan significantly increased collagen type V deposition, all in comparison to the non-macromolecular crowding group at the respective time point. This preliminary study demonstrates the potential of gums as macromolecular crowding agents, but more detailed biological studies are needed to fully exploit their potential in the development of tissue-engineered medicines.

Plant gums in Pickering emulsions: A review of sources, properties, applications, and future perspectives.

Recently, there has been an increasing research interest in the development of Pickering emulsions stabilized with naturally derived biopolymeric particles. In this regard, plant gums, obtained as plant exudates or from plant seeds, are considered promising candidates for the development of non-toxic, biocompatible, biodegradable and eco-friendly Pickering stabilizers. The main objective of this review article is to provide a detailed overview and assess the latest advances in the formulation of Pickering emulsions stabilized with plant gum-based particles. The plant gum sources, types and properties are outlined. Besides, the current methodologies used in the production of plant gum particles formed solely of plant gums, or through interactions of plant gums with proteins or other polysaccharides are highlighted and discussed. Furthermore, the work compiles and assesses the innovative applications of plant gum-based Pickering emulsions in areas such as encapsulation and delivery of drugs and active agents, along with the utilization of these Pickering emulsions in the development of active packaging films, plant-based products and low-fat food formulations. The last part of the review presents potential future research trends that are expected to motivate and direct research to areas related to other novel food applications, as well as tissue engineering and environmental applications.

Exploring the potential of neem and tamarind gum as release retardants: Design and statistical optimisation of vildagliptin extended release matrix systems using D-optimal quadratic mixture design.

Exploring the significant role of natural polymers in developing drug delivery systems has been a promising area of research interest. The current investigation uses a D-optimal quadratic mixture design to design and evaluate neem and tamarind gum-based vildagliptin extended-release matrix tablets. Studying the combination effect of gums is one of the major objectives. Initial screening studies were performed to select the factors and their levels. The variables selected at different levels in mg/tablet are neem gum, tamarind gum, polyvinylpyrrolidone, and lactose monohydrate. Based on the screening experiments with both gums, the polymer content of 165 mg was chosen as the highest level in the DOE. Nineteen runs were generated to screen the desired parameters as responses. The total weight of the formulation was kept constant at 275 mg. Time (hours) required for 50 %, 90 % and 100 % of drug release and tablet hardness were selected as the responses for each run. The wet granulation method was adopted, and the critical variables were optimised using the design of experiments following Design Expert software. Statistical analysis was conducted, and the optimised formulations were prepared and evaluated to compare with the predicted responses. Stability studies were performed for the optimised batches. Results indicated that the prepared batches met the compendial limits and confirmed the application of neem and tamarind gum in the development of extended-release tablets of vildagliptin for 24 h. An optimised formulation comprising of 16.52 mg of neem gum and 148.48 mg of tamarind gum with a hardness of 7.5-8.5 kp produced 50 %, 90 % and 100 % drug release in 12, 22 and 25 h.

A novel biopolymer technique for encapsulation of Bacillus velezensis BV9 into double coating biopolymer made by in alginate and natural gums to biocontrol of wheat take-all disease.

Bacillus velezensis has been known for its high potential in controlling agricultural diseases. Technological advances have opened new perspectives for producing effective formulations by reducing some of the obstacles to their use, such as instability and loss of activity due to exposure to adverse environmental conditions. Encapsulation is one of the new approaches in agricultural science. This research describes discoveries related to processes for the microencapsulation of B. velezensis with natural gums. The efficiency, survival, and controlled release of B. velesensis BV9 encapsulated with alginate mixed with zedo gum, mastic gum, and tragacanth gum were evaluated for this aim. Furthermore, under greenhouse conditions, the encapsulated cells were assessed to control Gaeumannomyces graminis var. tritici in wheat. The results indicated that all tested microcapsules protected >60 % of the bacterial cells. The Alginate-Zedo Gum (Alg-ZG) microcapsules showed a better-controlled release over two months. The greenhouse study indicated that treating wheat plants with Alg-ZG microcapsules was the most efficient treatment, suppressing 100 % of the pathogen. The results indicated that Alg-ZG is the most promising mixture to improve the survivability of B. velezensis BV9. Also, using natural gums and great potential of this formulation provides an effective and affordable fertilizers for agriculture.

Natural gums and their derivatives based hydrogels: in biomedical, environment, agriculture, and food industry.

The hydrogels based on natural gums and chemically derivatized natural gums have great interest in pharmaceutical, food, cosmetics, and environmental remediation, due to their: economic viability, sustainability, nontoxicity, biodegradability, and biocompatibility. Since these natural gems are from plants, microorganisms, and seaweeds, they offer a great opportunity to chemically derivatize and modify into novel, innovative biomaterials as scaffolds for tissue engineering and drug delivery. Derivatization improves swelling properties, thereby developing interest in agriculture and separating technologies. This review highlights the work done over the past three and a half decades and the possibility of developing novel materials and technologies in a cost-effective and sustainable manner. This review has compiled various natural gums, their source, chemical composition, and chemically derivatized gums, various methods to synthesize hydrogel, and their applications in biomedical, food and agriculture, textile, cosmetics, water purification, remediation, and separation fields.

Gum-based Nanoparticles Targeting for Colon Rectal Cancer: Latest Research and Patents.

Colorectal disease is the third most prevelant cancer in both men and women, with an expected 106,180 new cases of colon cancer and 44,850 new cases of rectal cancer as per American Cancer Society. Targeted medicine delivery is vital in the treatment of colon disorders because it delivers long-term therapeutic results with little side effects. Natural polymer is biocompatible and biodegradable, which enables safety, improves storage, and physiological stability, it is utilized as drug delivery vehicles and has made great strides in recent years. Chitosan, alginate, pectin, guar gum, dextran, hyaluronic acid, and arabinoxylan are examples of natural polysaccharides that are utilized to create nanoparticles. Natural gums serve two purposes: first, they shield the medicine from stomach and intestinal conditions, allowing it to only be released in the colon. In this review, we introduce the different gum particularly used in nanoparticles formulation, and then discuss recent research and the latest patent in the development of gum-based nanoparticles for the treatment of colon rectal cancer.

Effect of Aloe vera and carboxymethyl cellulose-derived binary blend edible coating on the shelf life of fresh-cut apple.

In recent years, the demand and market for minimally processed fruits are increasing worldwide. Fresh-cut apples are extremely sensitive to environmental factors including oxygen, temperature, and microorganisms in resulting the browning of apples. Therefore, in this study, different concentration of blended edible-coating solution was prepared using Aloe vera and carboxymethyl cellulose (1:1, 1:2, 2:1, 3:3, 3:2, 4:2, 2:4, 3:4, and 4:3, respectively). Lease particle size (101.74 ± 0.67 nm) of the coating solution was observed with 3% A. vera and 2% carboxymethyl cellulose (CMC). Afterward, the shelf life of the apples was evaluated for 10 days at refrigeration condition. Results showed that a significant difference was found in weight loss of coated (6.42%-10.26%) and uncoated apples (8.12%-15.32%) for 2-10 days. Moreover, the titrable acidity of the cut apples increased during the storage time. Rheological data emerged that the viscosity of the coating solution decreases with the increasing temperature from 0 to 50°C. Fourier transform infrared spectroscopy data confirmed the presence of hydroxyl group (-OH), C=O, C-O, and N-H banding in the A. vera, CMC, and blend-coating solution. The blend solution indicated excellent antimicrobial efficiency. Total phenolic content of coated and uncoated apples at 0 day was 737.55 mg GAE kg-1 for uncoated and 717.88 mg GAE kg-1, respectively. Whereas, aerobic and psychrotrophic bacteria counts for edible coated apples significantly lower than control apples. For coated apples, aerobic and psychrotrophic bacteria counts were 1.59 ± 0.84 and 1.25 ± 0.49 log CFU g-1 were 4.26 ± 0.67 and 2.68 ± 0.22 log CFU g-1 at 10th day, respectively. Overall, it can be inferred that blend of A. vera and carboxymethyl cellulose could be used as a nontoxic potential anti-browning and antimicrobial component for the enhancement of the shelf life and additional nutritional value of fresh-cut apples.

Effect of Salt Concentration on Oil Recovery during Polymer Flooding: Simulation Studies on Xanthan Gum and Gum Arabic.

Oil recoveries from medium and heavy oil reservoirs under natural recovery production are small because of the high viscosity of the oil. Normal water flooding procedures are usually ineffective, as the injected water bypasses much of the oil because of its high mobility. Thermal flooding processes are desirable but have many disadvantages from costs, effects on the environment, and loss of lighter hydrocarbons. Chemical flooding options, such as bio-polymer flooding options, are attractive, as they are environmentally friendly and relatively cheap to deploy and help to increase the viscosity of the injecting fluid, thereby reducing its mobility and increasing its oil recovery. The downside to polymer flooding includes reservoir temperature, salinity, molecular weight, and composition. Six weight percentages of two polymers (xanthan gum, XG, and gum arabic, GA) are dissolved in water, and their viscosity is measured in the laboratory. These viscosities are incorporated with correlations in the Eclipse software to create models with different polymer concentrations of (0.1% wt., 0.2% wt., 0.3% wt., 0.4% wt., 0.5% wt., and 1% wt.). A base case of natural recovery and water injection was simulated to produce an oil recovery of 5.9% and 30.8%, respectively, while at 0.1% wt. and 1% wt., respectively, oil recoveries of 38.8% and 45.7% (for GA) and 48.1% and 49.8% (for XG) are estimated. At 5% and 10% saline conditions, a drop in oil recovery of (4.6% and 5.3%) is estimated during GA flooding and (1.2% and 1.7%) for XG flooding at 1% wt., respectively. XG exhibits higher oil recoveries compared to GA at the same % wt., while oil recoveries during GA floodings are more negatively affected by higher saline concentrations.

Recent advances in natural gums as additives to help the construction and application of edible biopolymer gels: the example of hydrogels and oleogels.

Novel, innovative approaches like edible gels (hydrogels and oleogels) are important food materials with great scientific interest due to their positive impacts on structural and functional foods and other unique properties. Biopolymers (protein, starch and other polysaccharides) can be excellent and cost-effective materials for the formed edible gels. Recently, natural gums, although also as biopolymers, are preferred as additives to further improve the textural and functional properties of edible gels, which have received extensive attention. However, these studies have not been outlined in previous reviews. In this review, we highlighted the advantages of gums as additives to construct edible gels. Moreover, the various roles (including electrostatic or covalent interactions) for natural gums in regulation of food gel properties (solvent-holding and rheological properties) are highlighted. Finally, the use of natural gums as additives to improve the stability and targeted delivery of phytochemicals in food gels and their application in food systems are summarized. The information covered in this article may be useful for the design of functional foods that can better meet personalized needs of people.

An appraisal of the utilization of natural gums as corrosion inhibitors: Prospects, challenges, and future perspectives.

Natural gums are macro compounds containing monosaccharide (sugar) units bonded by glycosidic to form long polymeric sugar chains of considerably high molecular weight. Natural gums are multifaceted in applications with the main areas being the food and pharmaceutical industries. The recent research interest in corrosion inhibitors is considering natural gums because of their abundance and ecological compatibility. Hence, this review takes a look at the use of natural gums in pure and modified forms in metals protection. The review establishes that the corrosion-protecting ability of natural gums has a direct connotation with their macromolecular weights, chemical composition, and molecular and electronic structures. Immersion duration and temperature are other factors found to affect the inhibition performance of natural gums considerably. The inhibition of natural gums in pure form is found not to be excellent due to their high hydration rate, algal and microbial contamination, solubility that depends on pH, and thermal instability. Common modification techniques adopted by corrosion inhibitor scientists are copolymerization, mixing with chemicals to induce synergism, crosslinking, and insertion of inorganic nanomaterials into the polymer matrix. Infusion of biosynthesized nanoparticles approach towards enhancing the corrosion inhibition efficiency of natural gums is recommended for future studies because of the unique characteristics of nanoparticles.

Drug Delivery Application of Functional Nanomaterials Synthesized Using Natural Sources.

Nanomaterials (NMs) synthesized from natural sources have been attracting greater attention, due to their intrinsic advantages including biocompatibility, stimuli-responsive property, nontoxicity, cost-effectiveness, and non-immunogenic characteristics in the biological environment. Among various biomedical applications, a breakthrough has been achieved in the development of drug delivery systems (DDS). Biocompatibility is necessary for treating a disease safely without any adverse effects. Some components in DDS respond to the physiological environment, such as pH, temperature, and functional group at the target, which facilitates targeted drug release. NM-based DDS is being applied for treating cancer, arthritis, cardiovascular diseases, and dermal and ophthalmic diseases. Metal nanomaterials and carbon quantum dots are synthesized and stabilized using functional molecules extracted from natural sources. Polymers, mucilage and gums, exosomes, and molecules with biological activities are directly derived from natural sources. In DDS, these functional components have been used as drug carriers, imaging agents, targeting moieties, and super disintegrants. Plant extracts, biowaste, biomass, and microorganisms have been used as the natural source for obtaining these NMs. This review highlights the natural sources, synthesis, and application of metallic materials, polymeric materials, carbon dots, mucilage and gums, and exosomes in DDS. Aside from that, challenges and future perspectives on using natural resources for DDS are also discussed.

Structural diversity, functional versatility and applications in industrial, environmental and biomedical sciences of polysaccharides and its derivatives - A review.

Recent efforts on the expansion of sustainable and commercial primal matters are essential to enhance the knowledge of their hazards and noxiousness to humans and their environments. For example, polysaccharide materials are widely utilized in food, wound dressing, tissue engineering, industry, targeted drug delivery, environmental, and bioremediation due to their attractive degradability, nontoxicity and biocompatibility. There are numerous easy, quick, and efficient ways to manufacture these materials that include cellulose, starch, chitosan, chitin, dextran, pectin, gums, and pullulan. Further, they exhibit distinctive properties when combined favourably with raw materials from other sources. This review discusses the synthesis and novel applications of these carbohydrate polymers in industrial, environmental and biomedical sciences.

Evaluation of a 13-Month-Old Anemic Child With Gushing Gums.

While it is common practice for adults to brush their teeth twice a day and instill in their children the importance of setting hygiene routines centered around brushing their teeth, infants and toddlers are often overlooked. Infants begin teething around four to seven months of age; during this period of tooth eruption, their gums are highly susceptible to bacterial build-up, causing problems long before oral hygiene comes to mind. We describe a case of a 13-month-old child presenting with bleeding gums and worsening anemia. After blood tests, iron supplementation, and a referral to a pediatric hematologist-oncologist out of concern for a potential bleeding disorder, this patient was diagnosed with normochromic, normocytic anemia caused by bleeding due to infectious gingivitis. After the completion of antibiotic therapy and changes to the patient's routine to incorporate appropriate oral hygiene, the anemia resolved. Generally benign, gingivitis induced by plaque biofilm can advance to more severe forms of periodontal disease, leading to receding gums and abscesses, thus reinforcing the importance of promoting adequate oral hygiene in all ages regardless of dentition. Additionally, educating primary-care providers on pediatric gingivitis allows for the inclusion of this diagnosis on differentials, limiting extensive blood tests and specialist appointments.