Novel manufacturing process of pneumococcal capsular polysaccharides using advanced sterilization methods.

Pneumococcal disease is caused by Streptococcus pneumoniae, including pneumonia, meningitis and sepsis. Capsular polysaccharides (CPSs) have been shown as effective antigens to stimulate protective immunity against pneumococcal disease. A major step in the production of pneumococcal vaccines is to prepare CPSs that meet strict quality standards in immunogenicity and safety. The major impurities come from bacterial proteins, nucleic acids and cell wall polysaccharides. Traditionally, the impurity level of refined CPSs is reduced by optimization of purification process. In this study, we investigated new aeration strategy and advanced sterilization methods by formaldehyde or ß-propiolactone (BPL) to increase the amount of soluble polysaccharide in fermentation supernatant and to prevent bacterial lysis during inactivation. Furthermore, we developed a simplified process for the CPS purification, which involves ultrafiltration and diafiltration, followed by acid and alcohol precipitation, and finally diafiltration and lyophilization to obtain pure polysaccharide. The CPSs prepared from formaldehyde and BPL sterilization contained significantly lower level of residual impurities compared to the refined CPSs obtained from traditional deoxycholate sterilization. Finally, we showed that this novel approach of CPS preparation can be scaled up for polysaccharide vaccine production.

Levothyroxine synthesis impurities are neither mutagenic nor genotoxic: Insilico, Ames test and micronucleus test studies.

In vitro and in silico tests were used to assess the possible genotoxicity and mutagenicity of five impurities that may be present in levothyroxine, a drug used for thyroid hormone replacement therapy. Neither ToxTree nor VEGA (Virtual Models for evaluating the properties of chemicals within a global architecture) identified cause for concern for any of the impurities. Ames test results (doses up to 1 mg per plate), with or without metabolic activation, were negative. The micronucleus test with TK6 (human lymphoblastoid) cells, at doses up to 500 µg/mL, with or without metabolic activation, also gave negative results.

Analytical Procedure Development and Proposed Established Conditions: A Case Study of a Mass Spectrometry Based NDSRI Analytical Procedure.

With the finalization of the ICH Q14 Analytical Procedure Development guideline, how to apply enhanced approaches (such as analytical quality by design (AQbD)) to develop an analytical procedure, and to propose Established Conditions (ECs) and corresponding reporting categories, is increasingly being discussed. To gain practical experience in applying an enhanced approach for method development and identifying ECs, we developed, validated, and implemented an analytical procedure for a nitrosamine drug substance-related impurity (NDSRI). Here, as an example of the application of Q12 Lifecycle Management guideline principles in regards to analytical procedures, we briefly elaborate how: 1) the principles documented in the ICH Q14 guideline for analytical procedure development were applied, with the focus on identifying an Analytical Target Profile (ATP), knowledge management and risk assessment; 2) analytical procedure robustness according to the recommendations in ICH Q2(R2) Validation of Analytical Procedure guideline and Q14, were evaluated; and 3) mass spectrometry ECs and associated proposed reporting categories were proposed.

Nonlinear models based on leaf architecture traits explain the variability of mesophyll conductance across plant species.

Mesophyll conductance ( g m ${g}_{{\rm{m}}}$ ) describes the efficiency with which CO 2 ${\mathrm{CO}}_{2}$ moves from substomatal cavities to chloroplasts. Despite the stipulated importance of leaf architecture in affecting g m ${g}_{{\rm{m}}}$ , there remains a considerable ambiguity about how and whether leaf anatomy influences g m ${g}_{{\rm{m}}}$ . Here, we employed nonlinear machine-learning models to assess the relationship between 10 leaf architecture traits and g m ${g}_{{\rm{m}}}$ . These models used leaf architecture traits as predictors and achieved excellent predictability of g m ${g}_{{\rm{m}}}$ . Dissection of the importance of leaf architecture traits in the models indicated that cell wall thickness and chloroplast area exposed to internal airspace have a large impact on interspecific variation in g m ${g}_{{\rm{m}}}$ . Additionally, other leaf architecture traits, such as leaf thickness, leaf density and chloroplast thickness, emerged as important predictors of g m ${g}_{{\rm{m}}}$ . We also found significant differences in the predictability between models trained on different plant functional types. Therefore, by moving beyond simple linear and exponential models, our analyses demonstrated that a larger suite of leaf architecture traits drive differences in g m ${g}_{{\rm{m}}}$ than has been previously acknowledged. These findings pave the way for modulating g m ${g}_{{\rm{m}}}$ by strategies that modify its leaf architecture determinants.

Al Impurity Upcycled High-Voltage Cathodes from Spent LiCoO2 Batteries.

Al impurity is among the most likely components to enter the spent lithium-ion battery (LIB) cathode powder due to the strong adhesion between the cathode material and the Al current collector. However, high-value metal elements tend to be lost during the deep removal of Al impurities to obtain high-purity metal salt products in the conventional hydrometallurgical process. In this work, the harmful Al impurity is designed as a beneficial ingredient to upcycle high-voltage LiCoO2 by incorporating robust Al-O covalent bonds into the bulk of the cathode assisted with Ti modification. Benefiting from the strong Al-O and Ti-O bonds in the bulk, the irreversible phase transitions of the upcycled R-LCO-AT have been significantly suppressed at high voltages, as revealed by in situ XRD. Moreover, a Li+-conductive Li2TiO3 protective layer is constructed on the surface of R-LCO-AT by pinning slow-diffusion Ti on the grain boundaries, resulting in improved Li+ diffusion kinetics and restrained interface side reactions. Consequently, the cycle stability and rate performance of R-LCO-AT were significantly enhanced at a high cutoff voltage of 4.6 V, with a discharge capacity of 189.5 mAhg-1 at 1 C and capacity retention of 92.9% over 100 cycles at 4.6 V. This study utilizes the detrimental impurity element to upcycle high-voltage LCO cathodes through an elaborate bulk/surface structural design, offering a strategy for the high-value utilization of spent LIBs.

Uncovering the Nonequilibrium Evolution Mechanism between Na2+2 δFe2- δ(SO4)3 Cathode and Impurities in the Na2SO4-FeSO4·7H2O Binary System for High-Voltage Sodium-Ion Batteries.

Sodium-ion batteries are increasingly recognized as ideal for large-scale energy storage applications. Alluaudite Na2+2 δFe2- δ(SO4)3 has become one of the focused cathode materials in this field. However, previous studies employing aqueous-solution synthesis often overlooked the formation mechanism of the impurity phase. In this study, the nonequilibrium evolution mechanism between Na2+2 δFe2- δ(SO4)3 and impurities by adjusting ratios of the Na2SO4/FeSO4·7H2O in the binary system is investigated. Then an optimal ratio of 0.765 with reduced impurity content is confirmed. Compared to the poor electrochemical performance of the Na2.6Fe1.7(SO4)3 (0.765) cathode, the optimized Na2.6Fe1.7(SO4)3@CNTs (0.765@CNTs) cathode, with improved electronic and ionic conductivity, demonstrates an impressive discharge specific capacity of 93.8 mAh g-1 at 0.1 C and a high-rate capacity of 67.84 mAh g-1 at 20 C, maintaining capacity retention of 71.1% after 3000 cycles at 10 C. The Na2.6Fe1.7(SO4)3@CNTs//HC full cell reaches an unprecedented working potential of 3.71 V at 0.1 C, and a remarkable mass-energy density exceeding 320 Wh kg-1. This work not only provides comprehensive guidance for synthesizing high-voltage Na2+2 δFe2- δ(SO4)3 cathode materials with controllable impurity content but also lays the groundwork of sodium-ion batteries for large-scale energy storage applications.

Carbon and Silicon Impurity Defects in GaN: Simulating Single-Photon Emitters by First Principles.

Defect single-photon emitters (SPE) in gallium nitride (GaN) have garnered great attentions in recent years due to the advantages they offer, including the ability to operate at room temperature, narrow emission linewidths, and high brightness. Nevertheless, the precise nature of the single-photon emission mechanism remains uncertain due to the multitude of potential defects that can form in GaN. In this work, our systematical investigation with the ab initio calculation indicates that carbon and silicon, as common dopants in gallium nitride, can interact with intrinsic defects in GaN and form new high-speed defect single-photon sources. Our findings identify a ternary defect NGaVNCN that possesses a short lifetime of less than 1 ns and a small zero-photon line (ZPL) of 864 nm. In other words, this defect can serve as a high-speed single photon source in the short wavelength window for fiber communication. In sharp contrast, the Si-supported defect NGaVNSiN has a higher unoccupied defect energy level which enters the conduction band and is therefore unsuitable for single photon emission. A systematic investigation has been conducted into the potential defects, thermal stability, and single-photon emission properties. The relaxation calculation and self-consistent calculations employed the Perdew-Burke-Ernzerhof exchange-correlation functional and Heyd-Scuseria-Ernzerhof exchange-correlation functional, respectively. These findings indicate the potential for high-performance single-photon sources through carbon or silicon doping of GaN.

Sources and control of impurity during one-pot enzymatic production of dehydroepiandrosterone.

Dehydroepiandrosterone (DHEA) has a promising market due to its capacity to regulate human hormone levels as well as preventing and treating various diseases. We have established a chemical esterification coupled biocatalytic-based scheme by lipase-catalyzed 4-androstene-3,17-dione (4-AD) hydrolysis to obtain the intermediate product 5-androstene-3,17-dione (5-AD), which was then asymmetrically reduced by a ketoreductase from Sphingomonas wittichii (SwiKR). Co-enzyme required for KR is regenerated by a glucose dehydrogenase (GDH) from Bacillus subtilis. This scheme is more environmentally friendly and more efficient than the current DHEA synthesis pathway. However, a significant amount of 4-AD as by-product was detected during the catalytic process. Focused on the control of by-products, we investigated the source of 4-AD and identified that it is mainly derived from the isomerization activity of SwiKR and GDH. Increasing the proportion of glucose in the catalytic system as well as optimizing the catalytic conditions drastically reduced 4-AD from 24.7 to 6.5% of total substrate amount, and the final yield of DHEA achieved 40.1 g/L. Furthermore, this is the first time that both SwiKR and GDH have been proved to be promiscuous enzymes with dehydrogenase and ketosteroid isomerase (KSI) activities, expanding knowledge of the substrate diversity of the short-chain dehydrogenase family enzymes. KEY POINTS: • A strategy of coupling lipase, ketoreductase, and glucose dehydrogenase in producing DHEA from 4-AD • Both SwiKR and GDH are identified with ketosteroid isomerase activity. • Development of catalytic strategy to control by-product and achieve highly selective DHEA production.

Spatially Dependent in-Gap States Induced by Andreev Tunneling through a Single Electronic State.

By using low-temperature scanning tunneling microscopy and spectroscopy (STM/STS), we observe in-gap states induced by Andreev tunneling through a single impurity state in a low carrier density superconductor (NaAlSi). The energy-symmetric in-gap states appear when the impurity state is located within the superconducting gap. In-gap states can cross the Fermi level, and they show X-shaped spatial variation. We interpret the in-gap states as a consequence of the Andreev tunneling through the impurity state, which involves the formation or breakup of a Cooper pair. Due to the low carrier density in NaAlSi, the in-gap state is tunable by controlling the STM tip-sample distance. Under strong external magnetic fields, the impurity state shows Zeeman splitting when it is located near the Fermi level. Our findings not only demonstrate the Andreev tunneling involving single electronic state but also provide new insights for understanding the spatially dependent in-gap states in low carrier density superconductors.

Simultaneous effect of oxygen impurity and flow rate of purge gas on adsorption capacity of and heel buildup on activated carbon during cyclic adsorption-desorption of VOC.

Irreversible adsorption, or heel buildup, negatively impacts activated carbon performance and shortens its lifetime. This study elucidates the interconnections between flow rate and the oxygen impurity of desorption purge gas with heel buildup on beaded activated carbon (BAC). Nine thermal desorption scenarios were explored, varying nitrogen purge gas oxygen impurity levels (<5 ppmv, 10,000 ppmv, 210,000 ppm (21 %)) and flow rates (0.1, 1, 10 SLPM or 1 %, 10 %, 100 % of adsorption flow rate) during thermal desorption. Results reveal that increasing purge gas flow rate improves adsorption capacity recovery and mitigates adverse effects of purge gas oxygen impurity. Cumulative heel increased with higher purge gas oxygen impurity and lower flow rates. In the least effective regeneration scenario (0.1 SLPM N2, 21 % O2), a 32.8 wt% cumulative heel formed on BAC after five cycles, while the best-case scenario (10 SLPM N2, <5 ppmv O2) resulted in only 0.3 wt%. Comparing the pore size distributions of virgin and used BAC shows that heel initially forms in narrow micropores (<8.5Å) and later engages mesopores. Thermogravimetric analysis (TGA) showed that oxygen impurity creates high boiling point and/or strongly bound heel species. TGA confirmed that higher purge gas flow rates reduce heel amounts but encourage chemisorbed heel formation in oxygen's presence. These findings can guide optimization of regeneration conditions, enhancing activated carbon's long-term performance in cyclic adsorption processes.

An isocratic HPLC-UV analytical procedure for assessment of glutathione and its related substances.

Reduced glutathione (GSH) is an endogenous tripeptide antioxidant which plays a crucial role in a variety of physiological and pathological activities. Although GSH is not present in any FDA-approved drug product, GSH dietary supplement products and compounded GSH drugs are available to patients in the US. Several incidents of toxicity have occurred in recent years due to endotoxin or otherwise contaminated GSH in compounded drugs. Efficient and sensitive analytical methods are needed for assessing and ensuring the quality of GSH substance and associated drug or dietary supplement products. Impurities A (L-cysteinylglycine), B (cysteine), C (oxidized L-glutathione) and D (γ-L-glutamyl-L-cysteine) are the main related impurities for GSH drug substance which have been detected and quantified by capillary electrophoresis and qNMR analytical procedures. However, there are no reported HPLC methods for detecting or quantifying the three main related impurities A, B and D even though numerous HPLC analytical methods have been reported for analyzing GSH and impurity C. In this report, an isocratic HPLC-UV analytical procedure was developed and validated for separating and identifying GSH and related impurities A-D as well as a newly identified degradant, L-pyroglutamic acid (pGlu), within 10 minutes with resolution (RS) more than 3. The LOD and LOQ were determined to be 0.02 % w/w and 0.05 % w/w, respectively, for impurities A-D and pGlu. Importantly, the optimized HPLC analytical procedure for GSH assay does not have interference from impurities A, B and D, providing highly specific results compared to the commonly used iodine titration method. The newly validated analytical procedure was applied to assess different commercial GSH bulk substance samples. The results suggest that the analytical procedure described in this work is suitable for quality assessment of GSH samples.

Quantitative analysis of the impurities in Etimicin using hydrophilic interaction liquid chromatography coupled with charged aerosol detector.

Etimicin is a typical aminoglycoside antibiotic (AG). High performance liquid chromatography-evaporation light scattering detector (HPLC-ELSD) method is a commonly used method for determining impurities in Etimicin. However, due to the poor reproducibility, low sensitivity and narrow linear range of the ELSD, high-throughput quantitative analysis of impurities in Etimicin currently poses a challenge. In this study, a sensitive method using hydrophilic interaction liquid chromatography coupled with charged aerosol detector (HILIC-CAD) was developed for the analysis of the impurities in Etimicin. The liquid phase conditions for determination impurities in Etimicin were optimized using Box Behnken design (BBD) and response surface methodology (RSM), resulting in satisfactory separation and optimal CAD output signal. We also studied the influence of CAD parameters on the signal-to-noise ratio and linearity of Etimicin and its impurities. This method has also been proven to be effective in separating impurities from two other typical AGs, Isepamicin and Amikacin. In the method validation, the coefficient of determination (R2) of Etimicin, Isepamicin and Amikacin and their impurities were all greater than 0.999, within the range of 0.5-50 µg/mL. The average recoveries of the impurities of three typical AGs were 99.03 %-101.22 %, RSDs all were less than 2.5 % for intra-day and inter-day precision, with good precision and accuracy. The developed HILIC-CAD quantification method was sensitive, accurate and highly selective for quantitative analysis of impurities in the AGs without need ion-pairing reagents, which is ensure the public medication safety. The method is first reported application of HILIC-CAD method for quantitative analysis of the impurities in AGs.

Effect of Carbon on Void Nucleation in Iron.

The study reports the significance of carbon presence in affecting void nucleation in Fe. Without carbon, void nucleation rates decrease gradually at high temperatures but remain significantly high and almost saturated at low temperatures. With carbon present, even at 1 atomic parts per million, void nucleation rates show a low-temperature cutoff. With higher carbon levels, the nucleation temperature window becomes narrower, the maximum nucleation rate becomes lower, and the temperature of maximum void nucleation shifts to a higher temperature. Fundamentally, this is caused by the change in effective vacancy diffusivity due to the formation of carbon-vacancy complexes. The high sensitivity of void nucleation to carbon comes from the high sensitivity of void nucleation to the vacancy arrival rate in a void. The void nucleation is calculated by first obtaining the effective vacancy diffusivity considering the carbon effect, then calculating the defect concentration and defect flux change considering both carbon effects and pre-existing dislocations, and finally calculating the void nucleation rate based on the recently corrected homogeneous void nucleation theory. The study is important not only in the fundamental understanding of impurity effects in ion/neutron irradiation but also in alloy engineering for judiciously introducing impurities to increase swelling resistance, as well as in the development of simulation and modeling methodologies applicable to other metals.

Facile Access to Solifenacin Impurity K: One-Step Synthesis and an HPLC-MS Method for Its Determination.

Solifenacin (SFC) is a potent muscarinic antagonist that effectively reduces bladder muscle contraction, thereby alleviating symptoms such as frequency of micturition and urgency. Oxidation of SFC leads to the formation of impurities like Impurity K. Effective analysis and control of this impurity is crucial for ensuring compliance with regulatory standards and safeguarding patient health. To address these challenges, we propose a novel one-step synthesis of Impurity K from SFC. Impurity K was synthesized using cerium(IV) ammonium nitrate (CAN) in water/acetonitrile as the solvent. Additionally, we describe a new HPLC-MS method for the detection of Impurity K in solifenacin succinate tablets.

Binding Energies and Optical Properties of Power-Exponential and Modified Gaussian Quantum Dots.

We examine the optical and electronic properties of a GaAs spherical quantum dot with a hydrogenic impurity in its center. We study two different confining potentials: (1) a modified Gaussian potential and (2) a power-exponential potential. Using the finite difference method, we solve the radial Schrodinger equation for the 1s and 1p energy levels and their probability densities and subsequently compute the optical absorption coefficient (OAC) for each confining potential using Fermi's golden rule. We discuss the role of different physical quantities influencing the behavior of the OAC, such as the structural parameters of each potential, the dipole matrix elements, and their energy separation. Our results show that modification of the structural physical parameters of each potential can enable new optoelectronic devices that can leverage inter-sub-band optical transitions.

Ecofriendly micellar mediated spectrofluorimetric method for ultrasensitive quantification of the antiparkinsonian drug safinamide in pharmaceutical formulation and spiked human plasma.

A novel, highly sensitive and eco-friendly micellar-mediated spectrofluorimetric method was developed and validated for the determination of the novel antiparkinsonian drug safinamide mesylate in the presence of its related precursor impurity, 4-hydroxybenzaldehyde. The proposed approach relies on increasing the inherent fluorescence emission at 296 nm of safinamide, by forming hydrogen bonds between the mentioned drug and sodium dodecyl sulfate in the micellar system using 0.1 N HCl as a solvent, following excitation at 226 nm. A thorough investigation was conducted into the experimental factors affecting spectrofluorimetric behavior of the studied drug. A linearity plot of safinamide over the concentration range of 10.0-1000.0 ng/mL against the relative fluorescence intensities was established. The proposed method demonstrated excellent sensitivity down to the nano-gram level with detection and quantitation limits of 1.91 and 5.79 ng/mL, respectively. The studied drug was effectively determined in Parkimedine® Tablets. Furthermore, the proposed method allows for ultrasensitive quantification of safinamide in spiked human plasma, with satisfactory percentage recovery (98.97-102.28%). Additionally, the greenness assessment using the advanced green certificate classification approach, the complementary green analytical procedure index (Complex-GAPI), and the analytical GREEness metric approach (AGREE), along with the practicality check using the Blue Applicability Grade Index in addition to the all-inclusive overall whiteness evaluation using the RGB-12 model were carried out. The outcomes demonstrated the effectiveness and whiteness of the proposed technique. Clearly, the suggested approach has the advantages of being simple, requiring no pretreatment steps, and relying solely on direct measuring procedures.

Determination of nitrobenzene potential genotoxic impurities in nifedipine with GC-MS.

There is an increasing scientific interest in the detection of genotoxic impurities (GTIs), with nitrobenzene compounds being considered potential genotoxic impurities due to their structural alerts, which demonstrates a threat to drug safety for patient. While current reports on the detection of nifedipine impurity primarily focus on general impurities in nifedipine. In this study, an effective and simple gas chromatography-mass spectrometry (GC-MS) method was established and verified for the separation and quantification of 2-nitrotoluene, 2-nitrobenzyl alcohol, 2-nitrobenzaldehyde, 3-nitrobenzaldehyde, 4-nitrobenzaldehyde, and 2-nitrobenzyl bromide in nifedipine, which have not been previously reported. The validation of this GC-MS method was conducted following the International Conference of Harmonization (ICH) guidelines, exhibiting good linearity within the range of 2-40 µg/g and accuracy between 84.6 % and 107.8 %, the RSD% of intra-day and inter-day precision was in the range of 1.77-4.55 %, stability and robustness also met acceptance criteria. This method filled the gap in detection method for nitrobenzene compounds in nifedipine, offering a novel method and technical support for nifedipine quality control.

Identification and structural elucidation of an oxidation product generated during stability studies of Cabergoline drug product.

Cabergoline is a dopamine agonist with applications as anti-Parkinson drug and prolactin inhibitor. The cabergoline drug product Laktostop® 50 µg/mL is used in veterinary medicine for lactation suppression in cats and dogs e.g. during false pregnancy. Recently, during ongoing HPLC stability testing of Laktostop® 50 µg/mL a new oxidation product of Cabergoline was identified. A synthesis starting from Cabergoline was developed, followed by full characterization of the unknown impurity. Preliminary HPLC and LC-MS analyses indicated the unknown impurity as mono-oxygenated product of Cabergoline (Cabergoline N-oxide) that is presumably formed with oxygen by a radical mechanism. Thus, Cabergoline was treated with oxidizing agents such as m-chloroperoxybenzoic acid to afford the desired Cabergoline-N-oxide as a byproduct. After isolation by column chromatography, NMR and LC-MS-MS studies provided evidence that oxidation occurred at the N-allyl nitrogen of Cabergoline to form Cabergoline-N-oxide. © 1905 Elsevier Science. All rights reserved.

Investigation into the genotoxic impurity, 1-methyl-4-nitrosopiperazine, in rifampicin.

This study assessed the presence of the genotoxic impurity 1-methyl-4-nitrosopiperazine (MNP) in 27 batches of rifampicin capsules obtained from 11 manufacturers in China. While they were below the temporary limit of 5 ppm set by the US Food and Drug Administration, the observed levels (0.33-2.36 ppm) exceeded the acceptable threshold of 0.16 ppm. Building upon preliminary findings and degradation experiments, we concluded that MNP is a by-product of the oxidative degradation of rifampicin or is introduced via oxidation or nitrosation during the synthesis process involving 1-methyl-4-aminopiperazine. The pathways of MNP formation were confirmed in this study. Furthermore, we observed that the addition of antioxidants, sealed storage, and selection of dominant crystal forms can aid in controlling MNP levels.

Analytical quality by design-based development of a capillary electrophoresis method for Omeprazole impurity profiling.

Omeprazole (OME) is a proton pump inhibitor used to treat gastroesophageal reflux disease associated conditions. The current study presents an Analytical Quality by Design-based approach for the development of a CE method for OME impurity profiling. The scouting experiments suggested the selection of solvent modified Micellar ElectroKinetic Chromatography operative mode using a pseudostationary phase composed of sodium dodecyl sulfate (SDS) micelles and n-butanol as organic modifier in borate buffer. A symmetric three-level screening matrix 37//16 was used to evaluate the effect of Critical Method Parameters, including Background Electrolyte composition and instrumental settings, on Critical Method Attributes (critical resolution values, OME peak width and analysis time). The analytical procedure was optimized using Response Surface Methodology through a Central Composite Orthogonal Design. Risk of failure maps made it possible to define the Method Operable Design Region, within which the following optimized conditions were selected: 72 mM borate buffer pH 10.0, 96 mM SDS, 1.45 %v/v n-butanol, capillary temperature 21 °C, applied voltage 25 kV. The method was validated according to ICH guidelines and robustness was evaluated using a Plackett-Burman design. The developed procedure enables the simultaneous determination of OME and seven related impurities, and has been successfully applied to the analysis of pharmaceutical formulations.