Sodiophilic Substrate Induces NaF-Rich Solid Electrolyte Interface for Dendrite-Free Sodium Metal Anode.

3D substrate with abundant sodiophilic active sites holds promise for implementing dendrite-free sodium metal anodes and high-performance sodium batteries. However, the heightened electrode/electrolyte side reactions stemming from high specific surface area still hinder electrode structure stability and cycling reversibility, particularly under high current densities. Herein, the solid electrolyte interface (SEI) component is regulated and detrimental side reactions are restrained through the uniform loading of Na-Sn alloy onto a porous 3D nanofiber framework (NaSn-PCNF). The strong interaction between Na-Sn alloy and PF6 - anions facilitates the dissociation of sodium salts and releases more free sodium ions for effective charge transfer. Simultaneously, the modulations of the interfacial electrolyte solvation structure and the construction of a high NaF content SEI layer stabilize the electrode/electrolyte interface. NaSn-PCNF symmetrical battery demonstrates stable cycling for over 600 h with an ultralow overpotential of 24.5 mV under harsh condition of 10 mA cm-2 and 10 mAh cm-2. Moreover, the full cells and pouch cells exhibit accelerated reaction kinetics and splendid capacity retention, providing valuable insights into the development of advanced Na substrates for high-energy sodium metal batteries.

Electron Microscopy of Neurons on Biomimetic Substrates.

Recent advancements in nano- and microfabrication techniques have led to the development of highly biomimetic patterned substrates able to guide neuronal sprouting, routing, elongation, and branching. Such substrates, recapitulating shapes and geometries found in the native brain, may pave the way toward the development of cell instructive paradigms able to guide morphogenesis at the neuron-material interface. In this scenario, high-resolution electron microscopy approaches, owing to their ability of discerning the details of neural morphogenesis at a nanoscale resolution, may play a crucial role in unravelling the fine ultrastructure of neurons interfacing with biomimetic structured substrates.

Low Contact Resistance on Monolayer MoS2 Field-Effect Transistors Achieved by CMOS-Compatible Metal Contacts.

Contact engineering on monolayer layer (ML) semiconducting transition metal dichalcogenides (TMDs) is considered the most challenging problem toward using these materials as a transistor channel in future advanced technology nodes. The typically observed strong Fermi-level pinning induced in part by the reaction of the source/drain contact metal and the ML TMD frequently results in a large Schottky barrier height, which limits the electrical performance of ML TMD field-effect transistors (FETs). However, at a microscopic level, little is known about how interface defects or reaction sites impact the electrical performance of ML TMD FETs. In this work, we have performed statistically meaningful electrical measurements on at least 120 FETs combined with careful surface analysis to unveil contact resistance dependence on interface chemistry. In particular, we achieved a low contact resistance for ML MoS2 FETs with ultrahigh-vacuum (UHV, 3 × 10-11 mbar) deposited Ni contacts, ∼500 Ω·µm, which is 5 times lower than the contact resistance achieved when deposited under high-vacuum (HV, 3 × 10-6 mbar) conditions. These electrical results strongly correlate with our surface analysis observations. X-ray photoelectron spectroscopy (XPS) revealed significant bonding species between Ni and MoS2 under UHV conditions compared to that under HV. We also studied the Bi/MoS2 interface under UHV and HV deposition conditions. Different from the case of Ni, we do not observe a difference in contact resistance or interface chemistry between contacts deposited under UHV and HV. Finally, this article also explores the thermal stability and reliability of the two contact metals employed here.

Advancing Superconductivity with Interface Engineering.

The development of superconducting materials has attracted significant attention not only for their improved performance, such as high transition temperature (TC), but also for the exploration of their underlying physical mechanisms. Recently, considerable efforts have been focused on interfaces of materials, a distinct category capable of inducing superconductivity at non-superconducting material interfaces or augmenting the TC at the interface between a superconducting material and a non-superconducting material. Here, two distinct types of interfaces along with their unique characteristics are reviewed: interfacial superconductivity and interface-enhanced superconductivity, with a focus on the crucial factors and potential mechanisms responsible for enhancing superconducting performance. A series of materials systems is discussed, encompassing both historical developments and recent progress from the perspectives of technical innovations and the exploration of new material classes. The overarching goal is to illuminate pathways toward achieving high TC, expanding the potential of superconducting parameters across interfaces, and propelling superconductivity research toward practical, high-temperature applications.

Multifunctional Self-Assembled Bio-Interfacial Layers for High-Performance Zinc Metal Anodes.

Rechargeable aqueous zinc-ion (Zn-ion) batteries are widely regarded as important candidates for next-generation energy storage systems for low-cost renewable energy storage. However, the development of Zn-ion batteries is currently facing significant challenges due to uncontrollable Zn dendrite growth and severe parasitic reactions on Zn metal anodes. Herein, we report an innovative strategy to improve the performance of aqueous Zn-ion batteries by leveraging the self-assembly of bovine serum albumin (BSA) into a bilayer configuration on Zn metal anodes. BSA's hydrophilic and hydrophobic fragments form unique and intelligent ion channels, which regulate the migration of Zn ions and facilitate their desolvation process, significantly diminishing parasitic reactions on Zn anodes and leading to a uniform Zn deposition along the Zn (002) plane. Notably, the Zn||Zn symmetric cell with BSA as the electrolyte additive demonstrated a stable cycling performance for up to 2400 hours at a high current density of 10 mA cm-2. This work demonstrates the pivotal role of self-assembled protein bilayer structures in improving the durability of Zn anodes in aqueous Zn-ion batteries.

TiO2-based photocatalysts from type-II to S-scheme heterojunction and their applications.

Photocatalysis is a promising sustainable technology to remove organic pollution and convert solar energy into chemical energy. Titanium dioxide has drawn extensive attention in this field owing to its high activity under UV light, good chemical stability, large availability, low price and low toxicity. However, the poor quantum efficiency derived from fast electron/hole recombination, the limited utilization of sunlight, and a weak reducing ability still hinder its practical application. Among the modification strategies of TiO2 to enhance its performance, the construction of heterojunctions with other semiconductors is a powerful and versatile way to maximise the separation of photogenerated charge carriers and steer their transport toward enhanced efficiency and selectivity. Here, the research progress and current status of TiO2 modification are reviewed, focusing on heterojunctions. A rapid evolution of the understanding of the different charge transfer mechanisms is witnessed from traditional type II to the recently conceptualised S-scheme. Particular attention is paid to different synthetic approaches and interface engineering methods designed to improve and control the interfacial charge transfer, and several cases of TiO2 heterostructures with metal oxides, metal sulfides and carbon nitride are discussed. The application hotspots of TiO2-based photocatalysts are summarized, including hydrogen generation by water splitting, solar fuel production by CO2 conversion, and the degradation of organic water pollutants. Hints about less studied and emerging processes are also provided. Finally, the main issues and challenges related to the sustainability and scalability of photocatalytic technologies in view of their commercialization are highlighted, outlining future directions of development.

Device modeling of high performance and eco-friendly FAMASnI 3 based perovskite solar cell.

Developing environmentally friendly and highly efficient inverted perovskite solar cells (PSCs) encounters significant challenges, specifically the potential toxicity and degradation of thin films in hybrid organic-inorganic photovoltaics (PV). We employed theoretical design strategies that produce hysteresis-reduced, efficient, and stable PSCs based on composition and interface engineering. The devices include a mixed-organic-cation perovskite formamidinium methylammonium tin iodide ( FAMASnI 3 ) as an absorber layer and zinc oxide (ZnO) together with a passivation film phenyl-C61-butyric acid methyl ester ( PC 61 BM ) as a double-electron transport layer (DETL). Furthermore, a nickel oxide (NiO) layer and a trap-free junction copper iodide (CuI) are used as a double-hole transport layer (DHTL). The optoelectronic characterization measurements were carried out to understand the physical mechanisms that govern the operation of the devices. The high power conversion efficiencies (PCEs) of 24.27% and 23.50% were achieved in 1D and 2D simulations, respectively. This study illustrates that composition and interface engineering enable eco-friendly perovskite solar cells, improving performance and advancing clean energy.

Leveraging doping strategies and interface engineering to enhance catalytic transformation of lithium polysulfides for high-performance lithium-sulfur batteries.

The commercialization of lithium-sulfur (Li-S) batteries has faced challenges due to the shuttle effect of soluble intermediate polysulfides and the sluggish kinetics of sulfur redox reactions. In this study, a synergistic catalyst medium was developed as a high-performance sulfur cathode material for Li-S batteries. Termed A/R-TiO2@ Ni-N-MXene, this sulfur cathode material features an in-situ derived anatase-rutile homojunction of TiO2 nanoparticles on Ni-N dual-atom-doped MXene nanosheets. Using in-situ transmission electron microscopy (TEM) technique, we observed the growth process of the homojunction for the first time confirming that homojunctions facilitated charge transfer, while dual-atom doping offered abundant active sites for anchoring and converting soluble polysulfides. Theoretical calculations and experiments showed that these synergistic effects effectively mitigated the shuttle effect, leading to improved cycling performance of Li-S batteries. After 500 cycles at a 1C rate, Li-S batteries using A/R-TiO2@Ni-N-MXene as cathode materials exhibited stable and highly reversible capacity with a capacity decay of only 0.056 % per cycle. Even after 150 cycles at a 0.1C rate, a high-capacity retention rate of 62.8 % was achieved. Additionally, efficient sulfur utilization was observed, with 1280.76 mA h/g at 0.1C, 694.24 mA h/g at 1C, alongside a sulfur loading of 1.5-2 mg/cm2. The effective strategy based on homojunctions showcases promise for designing high-performance Li-S batteries.

In Situ Induced Interface Engineering in Hierarchical Fe3O4 Enhances Performance for Alkaline Solid-State Energy Storage.

Rechargeable aqueous batteries adopting Fe-based materials are attracting widespread attention by virtue of high-safety and low-cost. However, the present Fe-based anodes suffer from low electronic/ionic conductivity and unsatisfactory comprehensive performance, which greatly restrict their practicability. Concerning the principle of physical chemistry, fabricating electrodes that could simultaneously achieve ideal thermodynamics and fast kinetics is a promising issue. Herein, hierarchical Fe3O4@Fe foam electrode with enhanced interface/grain boundary engineering is fabricated through an in situ self-regulated strategy. The electrode achieves ultrahigh areal capacity of 31.45 mA h cm-2 (50 mA cm-2), good scale application potential (742.54 mA h for 25 cm2 electrode), satisfied antifluctuation capability, and excellent cycling stability. In/ex situ characterizations further validate the desired thermodynamic and kinetic properties of the electrode endowed with accurate interface regulation, which accounts for salient electrochemical reversibility in a two-stage phase transition and slight energy loss. This work offers a suitable strategy in designing high-performance Fe-based electrodes with comprehensive inherent characteristics for high-safety large-scale energy storage.

Positive Effects of Guanidinium Salt Post-Treatment on Multi-Cation Mixed Halide Perovskite Solar Cells.

As one of the most promising photovoltaic technologies, perovskite solar cells (PSCs) exhibit high absorption coefficients, tunable bandgaps, large carrier mobilities, and versatile fabrication techniques. Nevertheless, the commercialization of the technology is hindered by poor material stability, short device lifetimes and the scalability of fabrication techniques. To address these technological drawbacks, various strategies have been explored, with one particularly promising approach involving the formation of a low-dimensional layer on the surface of the three-dimensional perovskite film. In this work, we demonstrate the use of guanidinium tetrafluoroborate, CH6BF4N3, (GATFB) as a post-treatment step to enhance the performance of PSCs. Compared with the control sample, the application of GATFB improves the film surface topology, reduces surface defects, suppresses non-radiative recombination, and optimizes band alignment within the device. These positive effects reduce recombination losses and enhance charge transport in the device, resulting in PSCs with an open-circuit voltage (VOC) of 1.18 V and a power conversion efficiency (PCE) of 19.7%. The results obtained in this work exhibit the potential of integrating low-dimensional structures in PSCs as an effective approach to enhance the overall device performance, providing useful information for further advancement in this rapidly evolving field of photovoltaic technology.

Transforming Red Phosphorus Photocatalysis: Dual Roles of Pre-Anchored Ru Single Atoms in Defect and Interface Engineering.

Crystalline red phosphorus(CRP), known for its promising photocatalytic properties, faces challenges in photocatalytic hydrogen evolution(PHE) due to undesired inherent charge deep trapping and recombination effects induced by defects. This study overcomes these limitations through an innovative strategy in integrating ruthenium single atoms(Ru1) within CRP to simultaneously repair the intrinsic undesired vacancy defects and serve as the uniformly distributed anchoring sites for a controllable growth into ruthenium nanoparticles(RuNP). Hence, a highly functionalized CRP with Ru1 and RuNP(Ru1-NP/CRP) with concerted effects in regulating electronic structures and promoting interfacial charge transfer has been achieved. Advanced characterizations unveil the pioneering dual role of pre-anchored Ru1 in transforming CRP photocatalysis. The regulations of vacancy defects on the surface of CRP minimize the detrimental deep charge trapping, resulting in the prolonged lifetime of charges. With the well-distributed in-situ growth of RuNP on Ru1 sites, the constructed robust "bridge" that connects CRP and RuNP facilitates constructive interfacial charge transfer. Ultimately, the synergistic effect induced by the pre-anchored Ru1 endows Ru1-NP/CRP with an exceptional PHE rate of 3175µmolh-1g-1, positioning it as one of the most efficient elemental-based photocatalysts. This breakthrough underscores the crucial role of pre-anchoring metal single atoms at defect sites of catalysts in enhancing hydrogen production.

Efficient Quasi-2D Perovskite Based Blue Light-Emitting Diodes with Carbon Dots Modified Hole Transport Layer.

Quasi-2D perovskites based blue light-emitting diodes (LEDs) suffer from its poor electroluminescence performance, mainly caused by the nonradiative recombination in in defect-rich low-n phases and the unbalanced hole-electron injection in the device. Here, we developed a highly efficient quasi-2D perovskite based sky-blue LEDs behaving recorded external quantum efficiency (EQE) of 21.07% by employing carbon dots (CDs) as additives in the hole transport layer (HTL). We ascribe the high EQE to the effective engineering of CDs: (1) The CDs at the interface of HTLs can suppress the formation of low-efficient n = 1 phase, resulting a high luminescence quantum yield and energy transfer efficiency of the mixed n-phase quasi-2D perovskites. (2) The CDs additives can reduce the conductivity of HTL, partially blocking the hole injection, and thus making more balanced hole-electron injection. The CDs-treated devices have excellent Spectral stability and enhanced operational stability and could be a new alternative additive in the perovskite optoelectronic devices.

Interface Engineering of the Cu1.5Mn1.5O4/CeO2 Heterostructure for Highly Efficient Electrocatalytic Nitrate Reduction to Ammonia.

The electrochemical nitrate reduction reaction (NO3RR) is considered a sustainable technology to convert the nitrate pollutants to ammonia. However, developing highly efficient electrocatalysts is necessary and challenging given the slow kinetics of the NO3RR with an eight-electron transfer process. Here, a Cu1.5Mn1.5O4 (CMO)/CeO2 heterostructure with rich interfaces is designed and fabricated through an electrospinning and postprocessing technique. Benefiting from the strong coupling between CMO and CeO2, the optimized CMO/CeO2-2 catalyst presents excellent NO3RR performance, with NH3 Faraday efficiency (FE) up to 93.07 ± 1.45% at -0.481 V vs reversible hydrogen electrode (RHE) and NH3 yield rate up to 48.06 ± 1.32 mg cm-2 h-1 at -0.681 V vs RHE. Theoretical calculations demonstrate that the integration of CeO2 with CMO modulates the adsorption/desorption process of the reactants and intermediates, showing a reduced energy barrier in the rate determination step of NO* to N* and achieving an outstanding NO3RR performance.

Tailoring Dzyaloshinskii-Moriya Interaction and Spin-Hall Topological Hall Effect in Insulating Magnetic Oxides by Interface Engineering.

Chiral spin textures, as exotic phases in magnetic materials, hold immense promise for revolutionizing logic, and memory applications. Recently, chiral spin textures have been observed in centrosymmetric magnetic insulators (FMI), due to an interfacial Dzyaloshinskii-Moriya interaction (iDMI). However, the source and origin of this iDMI remain enigmatic in magnetic insulator systems. Here, the source and origin of the iDMI in Pt/Y3Fe5O12 (YIG)/substrate structures are deeply delved by examining the spin-Hall topological Hall effect (SH-THE), an indication of chiral spin textures formed due to an iDMI. Through carefully modifying the interfacial chemical composition of Pt/YIG/substrate with a nonmagnetic Al3+ doping, the obvious dependence of SH-THE on the interfacial chemical composition for both the heavy metal (HM)/FMI and FMI/substrate interfaces is observed. The results reveal that both interfaces contribute to the strength of the iDMI, and the iDMI arises due to strong spin-orbit coupling and inversion symmetry breaking at both interfaces in HM/FMI/substrate. Importantly, it is shown that nonmagnetic substitution and interface engineering can significantly tune the SH-THE and iDMI in ferrimagnetic iron garnets. The approach offers a viable route to tailor the iDMI and associated chiral spin textures in low-damping insulating magnetic oxides, thus advancing the field of spintronics.

Synergistic effects of interface and phase engineering on telluride toward alkaline/neutral hydrogen evolution reaction in freshwater/seawater.

The development of efficient, stable, and versatile hydrogen evolution electrocatalysts is of great meaning, but still faces challenging. Interface engineering and phase engineering have been immensely applied in the field of hydrogen evolution reaction (HER) because of their unique physicochemical properties. However, they are typically used separately, which limits their effectiveness. Herein, we propose an interface-engineered CoMo/CoTe electrocatalyst, consisting of an amorphous CoMo (a-CoMo) layer-encapsulated crystalline CoTe array, achieving the profound optimization of catalytic performance. The experimental results and density functional theory calculations show that the d-band center of the catalyst shifts further upward in contrast with its crystalline-crystalline counterpart, optimizing the electronic structure and the intermediate adsorption, thereby reducing the kinetic barrier of HER. The a-CoMo/CoTe with superhydrophilic/superaerophobic features shows excellent catalytic performance in alkaline, neutral, and simulated seawater environments.

Bilateral Embedded Anchoring via Tailored Polymer Brush for Large-Area Air-processed Blue Light-Emitting Diodes.

Perovskite light-emitting diodes (PeLEDs) that can be air-processed promises the development of displaying optoelectronic device, while is challenged by technical difficulty on both the active layer and hole transport layer (HTL) caused by the unavoidable humidity interference. Here, we propose and validate that, planting the polymer brush with tailored functional groups in inorganic HTL, provides unique bilateral embedded anchoring that is capable of simultaneously addressing the n phases crystallization rates in the active layer as well as the deteriorated particulate surface defects in HTL. Exemplified by zwitterionic polyethyleneimine-sulfonate (PEIS) in present study, its implanting in NiOx HTL offers abundant nuclei sites of amino and sulfonate groups that balance the growth rate of different n phases in quasi-2D perovskite films. Moreover, the PEIS effectively nailed the interfacial contact between perovskite and NiOx, and reduced the particulate surface defects in HTL, leading to the enhanced PLQY and stability of large-area blue perovskite film in ambient air. By virtue of these merits, present work achieves the first demonstration of the air-processed blue PeLEDs in large emitting area of 1.0 cm2 with peak external quantum efficiency (EQE) of 2.09 %, which is comparable to the similar pure-bromide blue PeLEDs fabricated in glovebox.

Nanostructure engineering in organic semiconductor devices toward interface matching.

The performance of organic semiconductor devices with heterojunctions between the organic semiconductors and electrodes can be improved by reducing the contact resistance. In this study, we have developed nanopatterned electrodes that gradually change the impedance at the interface between the metal and organic semiconductor in organic devices, which were fabricated in periodic patterns using nanoimprint lithography. The imprint pattern spacing was changed to control the interface between the metal and organic semiconductor to ensure smooth carrier injection. We analyzed the carrier injection based on the pattern spacing of the electrode interface using electrical current-voltage and capacitance-frequency measurements in the diode. Subsequently, we analyzed the improved current mechanism through numerical simulation. Therefore, this study suggests the possibility of designing the interface of an organic device using the nanostructure between the organic semiconductor and carrier injection electrode.

Synergistic Modulation of Sn-Based Perovskite Solar Cells with Crystallization and Interface Engineering.

A high-quality Sn-based perovskite absorption layer and effective carrier transport are the basis for high-performance Sn-based perovskite solar cells. The suppression of Sn2+ oxidation and rapid crystallization is the key to obtaining high-quality Sn-based perovskite film. And interface engineering is an effective strategy to enhance carrier extraction and transport. In this work, tin fluoride (SnF2) was introduced to the perovskite precursor solution, which can effectively modulate the crystallization and morphology of Sn-based perovskite layer. Furthermore, the hole-transporting layer of PEDOT:PSS was modified with CsI to enhance the hole extraction and transport. As a result, the fabricated inverted Sn-based perovskite solar cells demonstrated a power conversion efficiency of 7.53% with enhanced stability.

Nanoironing van der Waals Heterostructures toward Electrically Controlled Quantum Dots.

Assembling two-dimensional van der Waals (vdW)-layered materials into heterostructures is an exciting development that sparked the discovery of rich correlated electronic phenomena. vdW heterostructures also offer possibilities for designer device applications in areas such as optoelectronics, valley- and spintronics, and quantum technology. However, realizing the full potential of these heterostructures requires interfaces with exceptionally low disorder which is challenging to engineer. Here, we show that thermal scanning probes can be used to create pristine interfaces in vdW heterostructures. Our approach is compatible at both the material- and device levels, and monolayer WS2 transistors show up to an order of magnitude improvement in electrical performance from this technique. We also demonstrate vdW heterostructures with low interface disorder enabling the electrical formation and control of quantum dots that can be tuned from macroscopic current flow to the single-electron tunneling regime.

Controllable Construction of a Mo2C/MoO2 Interface with an Ideal Mo2C/MoO2 Ratio for Efficient Electrocatalytic Nitrogen Reduction to Ammonia.

Electrocatalytic nitrogen reduction reaction (NRR) is considered to be a viable contender for the production of NH3. However, due to the sluggish adsorption and activation of the electrocatalyst toward inert N2 molecules, there is an urgent need for developing effective catalysts to facilitate the reaction. Inspired by natural nitrogenase, in which Mo atoms are the active centers, Mo-based electrocatalysts have received considerable attention, but further exploration is still necessary. Interface-engineered electrocatalysts can effectively optimize the absorption and activation of the catalytic active center for N2 and thus improve the electrocatalytic activity of NRR. However, the lack of studies for controllably constructing an optimal ratio of two phases at the interface hinders the development of NRR electrocatalysts. Herein, a series of Mo2C/MoO2 interface-engineered electrocatalysts with various Mo2C/MoO2 ratios were constructed by controlling the Y dosages. The controlled experimental results verified that the catalytic activity of NRR, the dosage of Y, and the ratio of Mo2C/MoO2 were strongly correlated. Density functional theory calculations show that the C-Mo-O coordination at the Mo2C/MoO2 interface can optimize the reaction path and reduce the energy barrier of the reaction intermediates, thereby enhancing the reaction kinetics of NRR.