ABSTRACT
IgG4-related disease is a fibroinflammatory condition characterized by dense lymphoplasmacytic infiltrates rich in IgG4-positive plasma cells affecting multiple organs. Though the most common renal manifestation of IgG4-related disease is tubulointerstitial nephritis, it can rarely present as secondary membranous nephropathy. We present a case of a 75-year-old male with phospholipase A2 receptor-negative membranous nephropathy as an atypical manifestation of IgG4-related disease. The patient presented with nephrotic syndrome and was found to have elevated serum IgG4 levels and IgG4-positive plasma cells in the kidney biopsy. He was successfully treated with corticosteroids and rituximab, resulting in significant improvement in proteinuria and normalization of IgG4 levels. This case highlights the importance of considering IgG4-related disease in patients with phospholipase A2 receptor-negative membranous nephropathy, especially in those with a history of other organ involvement. Early recognition and treatment of IgG4-related disease are crucial to prevent progressive kidney damage and improve patient outcomes.
ABSTRACT
This study introduces a novel approach to 4D printing of biocompatible Poly lactic acid (PLA)/poly methyl methacrylate (PMMA) blends using Artificial Neural Network (ANN) and Response Surface Methodology (RSM). The goal is to optimize PMMA content, nozzle temperature, raster angle, and printing speed to enhance shape memory properties and mechanical strength. The materials, PLA and PMMA, are melt-blended and 4D printed using a pellet-based 3D printer. Differential Scanning Calorimetry (DSC) and Dynamic Mechanical Thermal Analysis (DMTA) assess the thermal behavior and compatibility of the blends. The ANN model demonstrates superior prediction accuracy and generalization capability compared to the RSM model. Experimental results show a shape recovery ratio of 100% and an ultimate tensile strength of 65.2 MPa, significantly higher than pure PLA. A bio-screw, 4D printed with optimized parameters, demonstrates excellent mechanical properties and shape memory behavior, suitable for biomedical applications such as orthopaedics and dental implants. This research presents an innovative method for 4D printing PLA/PMMA blends, highlighting their potential in creating advanced, high-performance biocompatible materials for medical use.
ABSTRACT
Erosion of biodegradable polymeric excipients, such as polylactic acid (PLA) and polylactic-co-glycolic acid (PLGA), is generally characterized by microbalance for the remaining mass of PLA and/or PLGA and Gel Permeation Chromatography (GPC) for molecular weight (MW) decrease. For polymer erosion studies of intravitreal sustained release brimonidine implants, however, both microbalance and GPC present several challenges. Mass loss measurement by microbalance does not have specificity for excipient polymers and drug substances. Accuracy of the remaining mass by weighing could also be low due to sample mass loss through retrieval-drying steps, especially at later drug release (DR) time points. When measuring the decrease of polymer MW by GPC, trace amounts of polymeric degradants (oligomers and/or monomers) trapped inside the implants during DR tests may not be measurable due to sensitivity limitations of the GPC detector and column MW range. Previous efforts to measure remained PLGA weight of dexamethasone micro-implants using qNMR with external calibration have been performed, however, these measurements do not account for chemical structure changes (i.e. LA to GA ratio changes from time zero) of PLGA implants during drug release tests. Here, a qNMR method with an internal standard was developed to monitor the following changes in micro-implants during drug release tests: 1. The remaining overall PLA/PLGA mass. 2. The remaining lactic acid (LA), glycolic acid (GA) unit and PLGA's lauryl ester end group percentages. 3. The trace content of PLA/PLGA oligomers as degradants retained in the implants. Unlike microbalance analysis, qNMR has both specificity for drug substance, excipient polymer, and accuracy due to minimal implant loss during sample preparation. Compared to the overall PLA/PLGA remaining mass generally monitored in erosion studies, the percentage of remaining LA, GA, and the ester end group provide more information about the microstructure change (such as hydrophobicity) of PLA/PLGA. Additionally, the qNMR method can complement GPC methods by measuring the change of remaining PLA and PLGA oligomer concentrations in brimonidine implants, with tenfold less sample and no MW cutoff. The qNMR method can be used as a sensitive tool for both polymer excipient characterization and kinetics studies of brimonidine implant erosion.
ABSTRACT
There have been numerous studies on flame retardant modification of natural fiber/PLA composite materials due to the demand for applications. However, the existing flame retardant modification methods mostly involve adding flame retardants, which have a negative impact on the mechanical properties. Based on this, this study aims to introduce sulfonic groups into the cellulose of straw fibers via modification with a sulfamic acid-based deep eutectic solvent (SDES), thereby achieving flame retardance without affecting the inherent mechanical properties of the composite material. The performance enhancement of DS/PLA is manifested in the following specific aspects: the LOI reaches 36.53â¯%, the thermal stability is improved from 7.8â¯% of the residual carbon of PS/PLA to 38.4â¯%, and the tensile modulus is increased by 69.5â¯%. The preparation scheme for straw/PLA composite materials in this study is simple, economical, and efficient, and the flame retardant performance of the composite material is excellent, providing valuable references for flame retardant modification of natural fiber/plastic composite materials.
ABSTRACT
The low melt strength and brittleness of polylactic acid (PLA) significantly limit its application in high-performance and functional films. In this study, we successfully prepared ternary thermoplastic vulcanizates (TPVs) comprising of PLA, poly(caprolactone) (PCL) and natural rubber (NR), which exhibit co-continuous structure. During the peroxide-induced dynamic vulcanization process, PLA chains were effectively grafted and anchored to the cross-linked rubber network, thereby enhancing the melt strength of the material. This improvement allowed the ternary TPVs to be continuously and stably blown into films. The films exhibited excellent mechanical properties due to the synergistic effect of ductile PCL and elastic NR. Both the elongation at break and tear strength improved greatly. Interestingly, during the film blowing process, the highly stretched continuous NR crosslinked network stored large amounts of elastic energy, endowing the film with excellent heat shrinkage performance. With 15 phr NR, the heat shrinkage exceeded 35â¯%, which is sufficient for practical needs. This biodegradable film with heat-shrinkage properties can be processed on a large scale, offering a potential strategy to the urgent issue of plastic film pollution.
ABSTRACT
Over the last fifteen years, numerous studies have sought to decipher the role of lipoprotein-associated phospholipase A2 (Lp-PLA2) in vascular inflammation-related diseases, notably atherosclerosis. Despite the disappointing results of clinical trials using the Lp-PLA2 inhibitor darapladib, new pathophysiological, epidemiological and genetic data have enabled the development of new inhibitors. Recent studies also show that Lp-PLA2 is involved in vascular inflammation-related diseases other than atherosclerosis (ischemic stroke, Alzheimer's disease and vascular dementia, diabetes, cancers ), and inhibition of Lp-PLA2 could have beneficial therapeutic in these diseases. This review aims to present new data on Lp-PLA2 and to evaluate its current interest as a biomarker but also as a therapeutic target.
ABSTRACT
Largemouth bass ranavirus (LMBV) seriously affects the development of largemouth bass (Micropterus salmoides) industry and causes huge economic losses. Oral vaccine can be a promising method for viral disease precaution. In this study, MCP2α was identified as a valuable epitope region superior to MCP and MCP2 of LMBV by neutralizing antibody experiments. Then, recombinant Lactobacillus casei expressing the fusion protein MCP2αC (MCP2α as antigen, C represents flagellin C from Aeromonas hydrophila as adjuvant) on surface was constructed and verified. Further, PLA microsphere vaccine loading recombinant MCP2αC L. casei was prepared. The PLA microspheres vaccine were observed by scanning electron microscopy and showed a smooth, regular spherical surface with a particle size distribution between 100 and 200 µm. Furthermore, we evaluated the tolerance of PLA-MCP2αC vaccine in simulated gastric fluid and simulated intestinal fluid, and the results showed that PLA-MCP2αC can effectively resist the gastrointestinal environment. Moreover, the protective effect of PLA-MCP2αC against LMBV was evaluated after oral immunization and LMBV challenge. The results showed that PLA-MCP2αC effectively up-regulated the activity of serum biochemical enzymes (T-SOD, T-AOC, LZM, complement C3) and induced the mRNA expression of representative immune genes (IL-1ß, TNF-α, IFN-γ, MHC-IIα, Mx, IgM) in spleen and head kidney tissues. The survival rate of largemouth bass vaccinated with PLA-MCP2αC increased from 24 % to 68 %. Meanwhile, PLA-MCP2αC inhibited the LMBV burden in spleen, head kidney and liver tissues and attenuated tissue damage in spleen. These results suggested that PLA-MCP2αC can be used as a candidate oral vaccine against LMBV infection in aquaculture.
ABSTRACT
New nano/microcarriers of pesticides represent a highly promising novel field for sustainable pest management. However, despite extensive laboratory research, few studies on the design and evaluation of nanopesticides for field applications exist. In this study, we present a straightforward and green synthetic method of ultrasonic-assisted and hydrogen-bonded self-assembly at the oil-water interface for the synthesis of polylactic acid (PLA) microspheres encapsulating chlorantraniliprole (CAP), with precise control over the size of the microspheres. The resulting CAP-loaded PLA microspheres (CAP-PLA MS) exhibit both high pesticide encapsulation efficiency and stability in natural environments. It has been determined that non-Fickian diffusion mainly controls pesticide release, thus enabling dynamic control over molecular transport speeds. Importantly, our functional CAP-PLA MS demonstrates superior sustained pesticide release performance under both laboratory and field conditions while maintaining better exceptional insecticidal efficacy than normal CAP in controlling O. nubilalis at a concentration of 30 or 45 g/ha. Consequently, we propose that our functional PLA microspheres could serve as ideal pesticide carriers in the sustained treatment of O. nubilalis.
ABSTRACT
The increasing global utilization of biodegradable plastics due to stringent regulations on traditional plastics has caused a significant rise in microplastic (MPs) pollution in aquatic ecosystems from biodegradable products. However, the environmental behavior of biodegradable MPs remains inadequately elucidated. This study explored the aging processes of polylactic acid (PLA) and polystyrene (PS) under a heat-activated potassium persulfate (K2S2O8) system, as well as their adsorption characteristics towards tetracycline (TCs). In comparison to PS, the surface structure of PLA experienced more pronounced changes over aging, exhibiting evident pits, cracks, and fragmentation. The carbonyl index (CI) and oxygen/carbon ratio (O/C) of PS displayed exponential growth over time, whereas the values for PLA showed linear and exponential increases, respectively. The adsorption capacity of TCs by PS and PLA aged for 6 days increased from 0.312â¯mgâ§g-1 and 0.457â¯mgâ§g-1for original PS and PLA, respectively, to 0.372â¯mgâ§g-1 and 0.649â¯mgâ§g-1. Meanwhile, the adsorption rate (k2 values) for TCs decreased by 42.03â¯% for PS and 79.64â¯% for PLA compared to their initial values. The findings indicated that biodegradable PLA-MPs may exhibit higher tetracycline carrying capacities than PS, potentially increasing environmental and organismal risks, particularly in view of aging effects.
ABSTRACT
Material-extrusion-based 3D printing with polylactic acid (PLA) has transformed the production of lightweight lattice structures with a high strength-to-weight ratio for various industries. While PLA offers advantages such as eco-friendliness, affordability, and printability, its mechanical properties degrade due to environmental factors. This study investigated the impact resistance of PLA lattice structures subjected to material degradation under room temperature, humidity, and natural light exposure. Four lattice core types (auxetic, negative-to-positive (NTP) gradient in terms of Poisson's ratio, positive-to-negative (PTN) gradient in terms of Poisson's ratio, and honeycomb) were analyzed for variations in mechanical properties due to declines in yield stress and failure strain. Mechanical testing and numerical simulations at various yield stress and failure strain levels evaluated the degradation effect, using undegraded material as a reference. The results showed that structures with a negative Poisson's ratio exhibited superior resistance to local crushing despite material weakening. Reducing the material's brittleness (failure strain) had a greater impact on impact response compared to reducing its yield stress. This study also revealed the potential of gradient cores, which exhibited a balance between strength (maintaining similar peak force to auxetic cores around 800 N) and energy absorption (up to 40% higher than auxetic cores) under moderate degradation (yield strength and failure strain at 60% and 80% of reference values). These findings suggest that gradient structures with varying Poisson's ratios employing auxetic designs are valuable choices for AM parts requiring both strength and resilience in variable environmental conditions.
ABSTRACT
For the application of poly(lactic acid) (PLA) and PLA/starch composites in technical components such as toys, it is essential to know their degradation behavior under relevant application conditions in a hydrothermal environment. For this purpose, composites made from PLA and native potato starch were produced using twin-screw extruders and then processed into test specimens, which were then subjected to various one-week ageing processes with varying temperatures (23, 50, 70, 90 °C) and humidity levels (10, 50, 75, 90%). This was followed by mechanical characterization (tensile test) and identification of degradation using Gel Permeation Chromatography (GPC), Thermogravimetric Analysis (TGA), Fourier Transform Infrared Spectroscopy (FTIR), and Nuclear Magnetic Resonance spectroscopy (NMR). With increasing temperature and humidity, there was a clear degradation of the PLA, which could be reduced or slowed down by adding 50 wt.% starch, due to increased crystallinity. Hydrolysis was identified as the main degradation mechanism for PLA and PLA/starch composites, especially above the glass transition temperature, with thermo-oxidative degradation also playing a subordinate role. Both hydrolytic degradation and thermo-oxidative degradation led to a reduction in mechanical properties such as tensile strength.
ABSTRACT
The paper describes the type of changes in the structure and mechanical properties of 3D printed shapes under the influence of mineral oil. The effects of a room (23 °C) and elevated temperature (70 °C) on 3D prints manufactured by the FDM method and stored in oil for 15, 30, and 60 days on the change of properties and structure were investigated. The samples were produced from ABS (poly(acrylonitrile-co-butadiene-co-styrene)), ASA (poly(acrylonitrile-co-styrene-co-acrylate), PLA (poly(lactic acid)), and HIPS (high-impact polystyrene). Tests related to the strength of the materials, such as the static tensile test and Charpy impact test, were carried out. The structure was evaluated using a scanning electron microscope, and changes in chemical structure were determined by conducting FTIR (Fourier transform infrared spectroscopy) and TGA (thermogravimetric analysis) tests. The analysis of the results provided important information about the impact of mineral oil on specific materials. This is critical for designing and manufacturing components that can withstand mineral oil exposure in real-world environments. The materials underwent varying changes. Strength increased for PLA by about 28%, remained unchanged for ABS and HIPS during exposure for 30 days, and decreased for ASA with extended exposure up to 14%.
ABSTRACT
In this work, the authors investigated the impact of extrusion-based printing process on the structural characteristics of bio-based resins through rheological measurements. Two commercially available filaments made from unfilled and wood-filled polylactide (PLA) polymers were considered. Three-dimensional specimens were prepared by printing these filaments under various operating conditions, i.e., changing the extruder temperature and printing rate, and examined using time sweep tests. Specific cycle rheological testing was conducted on pelletized filaments to simulate temperature changes in the printing process. The rheological characteristics of unprocessed materials, in terms of storage (G') and loss (Gâ³) moduli, were found to be slightly affected by temperature changes. For a pure polymer, the G' slope at a low frequency decreased over time, showing that the polymer chains evolved from a higher to a lower molecular weight. For wood-filled materials, the G' slope rose over the testing time, emphasizing the formation of a percolated network of structured filler within the matrix. On the other side, the rheological parameters of both materials were strongly impacted by the printing extrusion and the related conditions. At lower nozzle temperatures (200 °C), by decreasing the printing speed, the G' and Gâ³ curves became increasingly different with respect to unprocessed resin; whereas at higher nozzle temperatures (220 °C), the influence of the printing speed was insignificant, and all curves (albeit distant from those of unprocessed matrix) mainly overlapped. Considerations on degradation kinetics of both materials during the printing process were also provided by fitting experimental data of complex viscosity with linear correlation over time.
ABSTRACT
This study focuses on the analysis of the displacements generated in 3D-printed acoustic guitar tops. Specifically, the influence of 3D printing direction parameters on the vibrational behavior of a guitar top designed for polylactic acid (PLA) by analyzing five points of the top surface at a reduced scale. For this purpose, finite element tests and laboratory experiments have been carried out to support the study. After analyzing the results, it can be affirmed that the vibrational response in reduced-scale top plates can be modified and controlled by varying the printing direction angle in additive manufacturing, providing relevant information about the displacement in the vibrational response of PLA acoustic guitars. Furthermore, this work shows that the behavior of a specific acoustic guitar design can be characterized according to a specific need.
ABSTRACT
Bone scaffolds serve a crucial role in tissue engineering, particularly in facilitating bone regeneration where natural repair is insufficient. Despite advancements in the fabrication of polymeric bone scaffolds, the challenge remains to optimize their mechanical resilience. Specifically, research on the fatigue behaviour of polymeric bone scaffolds is scarce. This study investigates the influence of pore architecture on the mechanical performance of poly-lactic-acid (PLA) scaffolds under quasi-static and cyclic compression. PLA scaffolds with a 60% porosity were fabricated using extrusion-based 3D printing in various designs: Gyroid, Lidinoid, Fischer-Koch, IWP, and Voronoi. Results demonstrated that Gyroid scaffolds had the highest compressive strength (6.6 MPa), followed by Lidinoid, Fischer-Koch, IWP, and Voronoi designs. Increased strut thickness was linked to higher compressive strength. However, normalized fatigue resistance showed a different pattern. While scaffolds resisted fatigue cycles at low strain amplitudes, fatigue damage was observed at higher strains. Voronoi structures exhibited the highest normalized fatigue performance, enduring around 58,000 cycles at 85% strain amplitude, followed by Gyroid, Fischer-Koch, Lidinoid, and IWP structures. Enhanced fatigue performance in different topologies correlated with the minimum cross-sectional area of scaffolds. Given the importance of both static and fatigue strength, the Gyroid topology emerges as the superior choice overall.
ABSTRACT
This study investigates the impact of infill density on the mechanical properties of fused deposition modeling (FDM) 3D-printed polylactic acid (PLA) and PLA reinforced with carbon fiber (PLA+CF) specimens, which hold industrial significance due to their applications in industries where mechanical robustness and durability are critical. Exposure to cooling lubricants is particularly relevant for environments where these materials are frequently subjected to cooling fluids, such as manufacturing plants and machine shops. This research aims to explore insights into the mechanical robustness and durability of these materials under realistic operating conditions, including prolonged exposure to cooling lubricants. Tensile tests were performed on PLA and PLA+CF specimens printed with varying infill densities (40%, 60%, 80%, and 100%). The specimens underwent tensile testing before and after exposure to cooling lubricants for 7 and 30 days, respectively. Mechanical properties such as tensile strength, maximum force, strain, and Young's modulus were measured to evaluate the effects of infill density and lubricant exposure. Higher infill densities significantly increased tensile strength and maximum force for both PLA and PLA+CF specimens. PLA specimens showed an increase in tensile strength from 22.49 MPa at 40% infill density to 45.00 MPa at 100% infill density, representing a 100.09% enhancement. PLA+CF specimens exhibited an increase from 23.09 MPa to 42.54 MPa, marking an 84.27% improvement. After 30 days of lubricant exposure, the tensile strength of PLA specimens decreased by 15.56%, while PLA+CF specimens experienced an 18.60% reduction. Strain values exhibited minor fluctuations, indicating stable elasticity, and Young's modulus improved significantly with higher infill densities, suggesting enhanced material stiffness. Increasing the infill density of FDM 3D-printed PLA and PLA+CF specimens significantly enhance their mechanical properties, even under prolonged exposure to cooling lubricants. These findings have significant implications for industrial applications, indicating that optimizing infill density can enhance the durability and performance of 3D-printed components. This study offers a robust foundation for further research and practical applications, highlighting the critical role of infill density in enhancing structural integrity and load-bearing capacity.
ABSTRACT
In oral implantology, surgeons often confront the need to improve alveolar bone quality and volume before implantation in patients with bone defects. While Guided Bone Regeneration (GBR) with titanium meshes is a clinical "gold standard" for bone augmentation, mesh removal pre-implantation presents a drawback. This study explores biodegradable scaffolds as an alternative. The research investigates the impact of various compositions of customized bone grafting scaffolds on proliferation and osteogenic differentiation processes in vitro. Plates (10 x 10 x 0.5 mm) were fabricated from polylactide (PLA), PLA with 15% hydroxyapatite nanoparticles (PLA/HA), and polylactide with glycolic acid copolymers (PLGA 60:40 and 85:15). Gingival fibroblasts assessed the influence of experimental samples on proliferation and osteogenic differentiation in a low-glucose medium. Osteogenic differentiation was induced, and alizarin red staining measured extracellular matrix calcification via spectrophotometry. Active proliferation of gingival fibroblasts occurred along scaffold edges during cultivation. Although cells proliferated with experimental samples, rates were lower than control cells. PLA/HA showed higher alizarin red staining intensity, indicating enhanced matrix calcification. Experimental samples (PLA, PLA/HA, PLGA 85:15, PLGA 60:40) supported cell proliferation at lower rates than control. PLA/HA demonstrated increased matrix calcification. Biodegradable membranes were non-toxic, suggesting potential for bone augmentation.
ABSTRACT
Stroke recurrence remains a critical challenge in clinical neurology, necessitating the identification of reliable predictive markers for better management and treatment strategies. This study investigates the interaction between lipoprotein-associated phospholipase A2 (Lp-PLA2) and platelets as a potential predictor for stroke recurrence, aiming to refine risk assessment and therapeutic approaches. In a retrospective cohort of 580 ischemic stroke patients, we analyzed clinical data with a focus on Lp-PLA2 and platelet levels. By using multivariable logistic regression, we identified independent predictors of stroke recurrence. These predictors were then used to develop a comprehensive nomogram. The study established diabetes mellitus, hypertension, low-density lipoprotein (LDL), Lp-PLA2 levels, and platelet counts as independent predictors of stroke recurrence. Crucially, the interaction parameter Lp-PLA2 * platelet (multiplication of Lp-PLA2 and platelet count) exhibited superior predictive power over each factor considered separately. Our nomogram incorporated diabetes mellitus, cerebral infarction causes, hypertension, LDL, and the Lp-PLA2 * platelet count interaction and demonstrated enhanced accuracy in predicting stroke recurrence compared to traditional risk models. The interaction between Lp-PLA2 and platelets emerged as a significant predictor for stroke recurrence when integrated with traditional risk factors. The developed nomogram offers a novel and practical tool in molecular neurobiology for assessing individual risks, facilitating personalized treatment strategies. This approach underscores the importance of multifactorial assessment in stroke management and opens avenues for targeted interventions to mitigate recurrence risks.
ABSTRACT
Bio-based multilayer films were prepared by using the innovative nanolayer coextrusion process to produce films with a number of alternating layers varying from 3 to 2049. For the first time, a semicrystalline polymer was confined by another semicrystalline polymer by nanolayering in order to develop high barrier polyamide (PA11)/polylactic acid (PLA) films without compromising thermal stability and mechanical behavior. This process allows the preparation of nanostratified films with thin layers (down to nanometric thicknesses) in which a confinement effect can be induced. The stratified structure has been investigated, and the layer thicknesses have been measured. Barrier properties were successfully correlated to the microstructure, as well as the thermal behavior, and mechanical properties. The layer continuity was fully achieved for most of the films, but some layer breakups have been observed on the film with the thinnest PLA layer (2049-layers film). Coextruding PLA with PA11 has induced an increase in PLA crystallinity (from 4 to 16%) along with an increase in thermal stability of the multilayer films without impacting PA11 properties. Gas barrier properties were driven by the PLA confined layers due to the microstructural rearrangement by increasing crystallinity, whereas water barrier properties were governed by the PA11 confining layers due to its lower water affinity. As a consequence, a decrease of water permeability (up to 11 times less permeable for the 6M film) but an increase of gas barrier properties (barrier improvement factor (BIF) of 66% for the 0M film for N2 and BIF of 36% for the 6M film for CO2 for instance) were evidenced as the layer number was increased. This study paves the way for the development of ecofriendly materials with outstanding barrier performances and highlights the importance of nonmiscible polymers adhesion at melt state and additives presence.
ABSTRACT
Using a solvent-casting method, a poly(lactic acid) (PLA) film incorporated with caprylic acid (CA) was developed as an active packaging against Salmonella enterica ser. Typhimurium and S. enteritidis to reduce the risk of microbial contamination during distribution and storage of meat. According to the minimum inhibitory concentration (MIC) test results of the natural antimicrobial, CA was introduced at 0.6, 1.2, 2.4, and 4.8 % (v/v) into neat PLA. The biofilm inhibitory effect and antimicrobial efficacy of CA-PLA film against both Salmonella strains, as well as the intermolecular interactions and barrier properties of CA-PLA film, were evaluated. Biofilm formation was reduced to below the detection limit (<1.0 log CFU/cm2) for both S. typhimurium and S. enteritidis when co-cultured overnight with 4.8 % CA-PLA film. The 4.8 % CA-PLA film achieved maximum log reductions of 2.58 and 1.65 CFU/g for S. typhimurium and 2.59 and 1.76 CFU/g for S. enteritidis on inoculated chicken breast and beef stored at 25 °C overnight, respectively, without any quality (color and texture) losses. CA maintained its typical chemical structure in the film, as confirmed by attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectra. Furthermore, film surface morphology observations by field emission scanning electron microscopy (FESEM) showed that CA-PLA film was smoother than neat PLA film. No significant (P > 0.05) changes were observed for water vapor permeability and oxygen permeability by the addition of CA into PLA film, suggesting that CA-PLA film is a promising strategy for active packaging to control Salmonella contamination in the meat industry.