ABSTRACT
INTRODUCTION: Nonsurgical root canal retreatment (NS-RCRT) becomes necessary when primary endodontic procedures fail. This study evaluates the efficacy of NS-RCRT using 2% chlorhexidine gel and foraminal enlargement techniques, aiming to assess whether these approaches enhance periapical healing outcomes and success rates compared to traditional NS-RCRT techniques reported in the literature. METHODS: This retrospective cohort study analyzed 120 teeth diagnosed with persistent apical periodontitis, from 80 patients who underwent NS-RCRT between January 2014 and December 2018 at a specialist's private practice. Data were collected following the Preferred Reporting Items for Observational Studies in Endodontics 2023 guidelines. Periapical healing was evaluated using digital periapical radiographs by three calibrated examiners. The outcome of the treatment was analyzed through descriptive statistics and bivariate analyses, including the Chi-Square and Fisher's Exact tests. Treatment outcomes were deemed successful if they showed complete or incomplete repair and unsuccessful if no repair was observed. RESULTS: The average follow-up period was 30 months. Under loose criteria, 92.50% (n = 111) of the teeth were categorized as successful, and 7.5% (n = 9) as unsuccessful. Bivariate analysis indicated that the radiographic restoration of apical transportation was the only factor that significantly influenced the outcome. CONCLUSIONS: NS-RCRT performed in a single visit using the foraminal enlargement technique and 2% chlorhexidine gel demonstrated high success rates and may be an effective alternative to tooth extraction. This method promoted periapical healing and could significantly improve NS-RCRT protocols. Further prospective studies are recommended to corroborate these findings.
ABSTRACT
Introduction: Ultrasonic vibration for metallic post removal seems to be a unanimous choice between endodontists and general practitioners for providing the best results and having the highest safety. This study compared the time required by ultrasonic vibration for removing metallic post (MP) when 1 or 2 ultrasonics devices are used. Materials and Methods: One hundred and fifteen teeth with MPs from 105 patients, indicated for nonsurgical endodontic retreatment were divided into 2 groups according to the number of ultrasonic devices used (G1-1 device) and (G2-2 devices). In G1, the MP was worn with a transmetal bur, alongside the wear of the cement line (around 2 mm deep). Then, an ultrasonic tip attached to an ultrasonic unit, with a power of 100% was activated at the level of the post, with constant water spray at a level of 1 mm above the axial surface of the tooth. The position of the tip was changed between buccal and lingual surfaces every 10 seconds until the MP was removed. In G2 the same procedures were performed as described in G1, but two ultrasonic tips were activated simultaneously at buccal and lingual surfaces until the MP was removed. The vibration time necessary for removing each MP was recorded using a chronometer. Results: The mean time was 131.10±29.68 seconds (mean±standard error of the mean) for MP removal using one ultrasonic device, and 24.86±6.88 seconds for two devices. The time required for MP removal using two ultrasonic devices was significantly less than when using one ultrasonic device (P<0.001). Conclusion: The technique with 2 ultrasonic devices proved to be more efficient than the one using only 1 ultrasonic device.
ABSTRACT
Introduction: This study aimed to compare the effectiveness of two endodontic cleaning techniques, passive ultrasonic irrigation (PUI) and the XP-endo Finisher R (XPR) system, in removing residual filling material during endodontic retreatment procedures. Materials and Methods: Forty mandibular premolars with oval canals were divided into four groups based on the sealer used (AH-Plus or Bio-C Sealer) and the cleaning technique employed (PUI or XPR). To ensure uniformity of canal volume among groups, initial micro-CT scans were conducted. The canals were instrumented, filled, and then re-instrumented before undergoing either PUI or XPR cleaning techniques. Residual filling material volumes were assessed through micro-CT scans, and statistical analysis was performed using the Kruskal-Wallis and Mann-Whitney U tests. Results: Following instrumentation, there was no significant difference in residual filling material volumes between AH-Plus and Bio-C Sealer groups (1.35 mm3and 1.02 mm3, respectively; P>0.05). However, after supplementary cleaning techniques, XPR-cleaned specimens exhibited significantly less residual material compared to PUI-cleaned specimens (0.01 mm3 and 0.29 mm3 for Bio-C Sealer, and 0.07 mm3 and. 0.30 mm3 for AH-Plus, P<0.05). Conclusion: The XPR system was found to be more effective than PUI in removing residual filling material from Bio-C Sealer-filled root canals. This highlights its potential as a useful supplementary cleaning technique in endodontic retreatment procedures.
ABSTRACT
INTRODUCTION: To assess the effect of combinations of two different endodontic sealers used in initial and endodontic retreatment on the bond strength of the secondary obturation and the penetrability of the sealers. METHODS: Forty-eight mandibular premolars were used, receiving standardized endodontic access and biomechanical preparation. Twenty-four teeth received AH Plus sealer (AHP) in primary obturation and the others received Bio-C Sealer (BCS). Retreatment protocol was performed with an R50 instrument. The samples were further subdivided into four groups (n = 12) based on the combination of primary/secondary obturation sealers: AHP/AHP; AHP/BCS; BCS/AHP; and BCS/BCS. Four samples from each subgroup received the addition of fluorophores to the sealer for penetrability analysis using laser scanning confocal fluorescence microscopy. The root portion on the 8 push-out samples was sectioned into 6 slices of 1.0 mm. Bond strength (BS) was assessed using a universal testing machine until displacement of the filling mass. Failure pattern was evaluated under a stereomicroscope (20× magnification). BS data were analyzed using two-way analysis of variance followed by Tukey's test (P < .05), and the association between the failure pattern and BS value was assessed using the chi-square test (P < .05). Penetrability was qualitatively evaluated. RESULTS: The highest BS values were observed in the AHP/AHP (4.54 ± 1.5 MPa) and BCS/AHP (5.00 ± 1.0 MPa) groups (P < .05), with a higher percentage of adhesive failures to the filling material for all groups. Laser scanning confocal fluorescence microscopy images indicated greater penetrability of AHP compared to BCS, both in initial treatment and retreatment. CONCLUSION: AHP sealer exhibited higher BS and greater penetrability compared to BCS sealer.
Subject(s)
Dental Bonding , Retreatment , Root Canal Filling Materials , Root Canal Obturation , Humans , Root Canal Filling Materials/therapeutic use , Dental Bonding/methods , Root Canal Obturation/methods , Root Canal Therapy/methods , Bicuspid , Epoxy Resins/therapeutic use , Dental Stress AnalysisABSTRACT
Background: Adherence to anti-tuberculosis treatment (ATT) in Brazil remains a challenge in achieving the goals set by the World Health Organization (WHO). Patients who are lost to follow-up during treatment pose a significant public health problem. This study aimed to investigate the factors associated with unfavorable ATT outcomes among those undergoing retreatment in Brazil. Methods: We conducted an observational study of patients aged ≥18 years with tuberculosis (TB) reported to the Brazilian National Notifiable Disease Information System between 2015 and 2022. Clinical and epidemiologic variables were compared between the study groups (new cases and retreatment). Regression models identified variables associated with unfavorable outcomes. Results: Among 743 823 reported TB cases in the study period, 555 632 cases were eligible, consisting of 462 061 new cases and 93 571 undergoing retreatments (44 642 recurrent and 48 929 retreatments after loss to follow-up [RLTFU]). RLTFU (odds ratio [OR], 3.96 [95% confidence interval {CI}, 3.83-4.1]) was a significant risk factor for any type of unfavorable ATT. Furthermore, RLTFU (OR, 4.93 [95% CI, 4.76-5.11]) was the main risk factor for subsequent LTFU. For death, aside from advanced age, living with HIV (OR, 6.28 [95% CI, 6.03-6.54]) was the top risk factor. Conclusions: Retreatment is a substantial risk factor for unfavorable ATT outcomes, especially after LTFU. The rates of treatment success in RLTFU are distant from the WHO End TB Strategy targets throughout Brazil. These findings underscore the need for targeted interventions to improve treatment adherence and outcomes in persons who experience RLTFU.
ABSTRACT
We performed a systematic review and meta-analysis to assess the efficacy of EGFR-tyrosine kinase inhibitors (TKI) retreatment in advanced/metastatic non-small-cell lung cancer (NSCLC) patients. We systematically searched PubMed, Embase, Cochrane databases, ASCO, and ESMO websites for studies evaluating EGFR-TKI retreatment in advanced/metastatic NSCLC patients. All analyses were performed using R software (v.4.2.2). We included 19 studies (9 CTs and 10 retrospective cohorts) with a total of 886 patients. In a pooled analysis of all patients during retreatment with TKI, median OS was 11.7 months (95% confidence interval [CI] 10.2-13.4 months) and PFS was 3.2 months (95% CI 2.5-3.9 months). ORR was 15% (95% CI 10-21%) and DCR was 61% (95% CI 53-67%). The subanalysis by generation of TKI in the rechallenge period revealed a slightly better ORR for patients on 3rd generation TKI (p = 0.05). Some limitations include the high heterogeneity of some of the analyses and inability to perform certain subanalyses. Our results unequivocally support the benefit of EGFR-TKI rechallenge in EGFR-mutated NSCLC patients progressing on TKI treatment after a TKI-free interval. These findings may be especially valuable in areas where access to novel therapeutic drugs and clinical trials is limited.
ABSTRACT
OBJECTIVES: This ex vivo study aimed to evaluate the influence of different filling techniques on the filling removal from oval root canals filled with bioceramic sealer. METHODS: Thirty-six mandibular incisors with single oval canals were filled with bioceramic sealer following the techniques (n = 12): single-cone, modified McSpadden, or continuous wave of condensation, and scanned by micro-computed tomography (micro-CT). The filling was removed using the Clearsonic ultrasound tip and Reciproc system up to the R40 instrument, and the working time was recorded. The teeth were scanned again by micro-CT. Percentage of remnant volume (mm³) of the filling material, dentin thickness, and root canal transportation were measured. The data was analyzed using parametric and non-parametric tests with a significance level of 5%. RESULTS: It took more time to remove the filling material using the continuous wave of condensation technique (p < 0.05), followed by the modified McSpadden and single-cone techniques. There was no difference (p > 0.05) when comparing the percentage of remaining filling material among the three groups, nor did it among the segments of each tooth. There was also no difference in the analysis of dentin thickness and transportation when comparing the groups (p > 0.05). CONCLUSIONS: The filling technique did not influence the amount of remaining filling material, dentin thickness, and transportation. The working time was longer with thermoplastic filling techniques. CLINICAL RELEVANCE: Endodontic retreatment in teeth filled with bioceramic sealers increases with their use. Several techniques are used to fill the root canals, thus, it is important to know whether the filling technique influences the non-surgical endodontic retreatment.
Subject(s)
Incisor , Root Canal Filling Materials , Root Canal Obturation , X-Ray Microtomography , Humans , In Vitro Techniques , Root Canal Obturation/methods , Incisor/diagnostic imaging , Mandible/diagnostic imaging , Root Canal Preparation/methods , Root Canal Preparation/instrumentation , Dental Pulp Cavity/diagnostic imagingABSTRACT
La terapéutica endodóntica se apoya básicamente en dos modelos teóricos o paradigmas: el concepto de "tubo hueco" técnico y quirúrgico esencialmente mecanicista, y el modelo terapéutico para conductos radiculares, que busca la restitución ad integrum de los tejidos apicales y el hueso alveolar que los rodea. La instrumentación debe complementarse con la limpieza por irrigación abundante y la obturación con un biomaterial bioactivo, con características reológicas que permitan su adaptación plástica a las paredes del conducto radicular y module la respuesta de los tejidos hacia la regeneración con aposición de tejido calcificado en el foramen apical (AU)
Endodontic therapy is basically based on two theoretical models or paradigms, which are the concept of the technical and surgical "hollow tube", essentially mechanistic, and the therapeutic model of root canals, which seeks the ad integrum restitution of the apical tissues and bone. alveolar that surrounds them. The instrumentation must be complemented with cleaning by abundant irrigation, and with a bioactive biomaterial, with rheological characteristics that allows its plastic adaptation to the walls of the root canal and modulates the response of the tissues towards regeneration with apposition of calcified tissue in the apical foramen (AU)
Subject(s)
Humans , Female , Adult , Biocompatible Materials , Root Canal Preparation/instrumentation , Retreatment , Periapical Diseases/complications , Root Canal Irrigants/therapeutic use , Tooth Apex , MolarABSTRACT
The remaining filling material after retreatment can harbor bacteria and organic tissues that can influence the outcome of the therapy. AIM: The aim of this study was to evalúate, by micro-CT, the amount of filling material remaining in the root canal after its removal using WaveOne Gold or ProDesign RT. MATERIAL AND METHOD: Forty human mandibular canines were instrumented with the ProTaper Next system up to the X2 instrument (25.06) and filled with gutta-percha cones and AHPlus. Teeth were divided into 2 groups (n=20): WaveOne Gold 25.07 (WOG) and ProDesign RT 25.08 (PRT) for filling removal, after which they were scanned in a micro-CT device to quantify the volume of remaining filling material. The data were subjected to log 10 transformation, Student 's t-test was performed to account for multiple observationsper sample, significance was set at 5%. RESULTS: Student 's t-test showed that there was no difference between the two systems regarding the volume of remaining filling material in the thirds: apical (p = 0.392), middle (p = 0.065), or cervical (p = 0.918). CONCLUSIÓN: Remaining filling material was present in all groups and both systems were similar in removing root filling material in mandibular canines.
A permanencia de material obturador após o retratamento pode abrigar bactérias e tecidos orgánicos que podem influenciar o resultado da terapia. OBJETIVO: O objetivo deste estudo foi avaliar, por micro-CT, a quantidade de material obturador remanescente no canal radicular após a desobturagdo com WaveOne Gold e ProDesign RT. MATERIAL E MÉTODO: Quarenta caninos inferiores humanos foram instrumentados com o sistema ProTaper Next até o instrumento X2 (25.06) e obturados com cones de guta-percha e AHPlus. Os dentes foram divididos em dois grupos (n=20): WaveOne Gold 25.07 (WOG) e ProDesign RT 25.08 (PRT) e escaneados em micro-CT para quantificagdo do volume de material obturador remanescente. Os dados foram submetidos á transformando log 10, o teste t de Student foi realizado para contabilizar múltiplas observagoes por amostra, a significáncia foi fixada em 5%. RESULTADOS: O teste t de Student mostrou que ndo houve diferenga no volume de material obturador remanescente entre os dois sistemas nos tergos: apical (p = 0,392), médio (p = 0,065) ou cervical (p = 0,918). CONCLUSÃO: O material obturador remanescente estavapresente em todos os grupos e ambos os sistemas foram semelhantes na remogdo do material obturador radicular nos caninos inferiores.
Subject(s)
Root Canal Filling Materials , X-Ray Microtomography , Humans , Cuspid/diagnostic imaging , In Vitro Techniques , Equipment DesignABSTRACT
OBJECTIVES: This laboratory study evaluated the influence of the fluorescence intensity of composite resins on additional tooth wear and the presence of restorative material in different dental thirds during the retreatment of direct veneers. MATERIALS AND METHODS: The crown dimensions of 60 bovine incisors were reduced to 10 × 8 mm. The teeth were classified according to the fluorescence intensity of the composites: low (LOW) (TPH Spectra), medium (MED) (Opallis), and high (HIGH) (Essentia) groups. The teeth were divided according to the removal methods: conventional (CON) and fluorescence-aided identification technique (FIT). The specimens were scanned (T0), received veneer preparation, and scanned again (T1). After restorations, the composites were removed and the teeth were scanned (T2). Measurement assessments between T1 and T2 were performed to determine additional wear, presence of residual areas, and the average between additional wear and the presence of residual areas. Kruskal Wallis, Mann-Whitney, Friedman, 2-way ANOVA, and post-Tukey tests were performed (α < 0.05). RESULTS: The comparison of composite resins indicated a smaller area of additional wear and greater residue presence in the HIGH group than the LOW group for both techniques in the cervical third. Regarding removal methods, the FIT produced greater additional wear than the CON method for the LOW and MED groups in the middle and cervical thirds. The incisal third exhibited greater additional wear than the other thirds. CONCLUSIONS: Composite resins with high fluorescence intensity removed using FIT had less tooth wear. The incisal third was the most affected area for direct veneer removal procedures. CLINICAL SIGNIFICANCE: A FIT has been proposed for composite resin removal; however, the different fluorescence intensities of composite resins can influence tooth wear caused during this procedure.
Subject(s)
Composite Resins , Dental Veneers , Composite Resins/chemistry , Cattle , Fluorescence , AnimalsABSTRACT
Introduction: The aim of this study was to assess the effectiveness of filling removal material from the apical third of curved mesial root canals of mandibular molars. Reciprocating instrumentation followed by additional rotary instrumentation with instruments made of alloys with different heat treatments was evaluated. Materials and Methods: Thirty-six mesial roots of mandibular molars were divided into two groups: Group Class IV consisted of 16 roots with two independent canals, and Group Class II consisted of 20 roots with two canals that merged into one at their apical level. Each of these two groups were further divided into two subgroups, according to the additional rotary instrument used after the reciprocating instrumentation: Group RH and Group RM for Hyflex and Mtwo, respectively. After each procedural step, the roots were scanned by micro-tomography. After each step of filling removal, the Wilcoxon matched pair test and the Mann-Whitney test were used for the evaluation between groups. The significance level adopted was 5%. Results: Significant differences were observed between groups with different Class II and Class IV anatomies, regarding filling removal after Reciproc (P<0.05). After the use of an additional rotary instrumentation, no differences were observed between the two groups (P>0.05). Conclusions: In the apical third of mesial roots of mandibular molars with Class II anatomy, an additional rotary instrumentation was shown to be necessary for improving the removal of filling material after using the single-file reciprocating instrumentation technique.
ABSTRACT
INTRODUCTION: The aim of this study was to evaluate the effectiveness of the XP-endo Finisher R (XPFR; FKG Dentaire, La Chaux-de-Fonds, Switzerland) or the Flatsonic ultrasonic tip (Helse Ultrasonic, Santa Rosa de Viterbo, SP, Brazil) in removing remaining filling material after the retreatment of flattened root canals using micro-computed tomographic imaging. METHODS: Twenty-four flattened distal root canals of mandibular molars with a buccolingual diameter 4 or more times larger than the mesiodistal diameter were prepared with Reciproc Blue (RB) R40 (VDW GmbH, Munich, Germany) and filled using the Tagger hybrid technique. All canals were retreated with RB R40, and apical enlargement was performed with RB R50 (VDW GmbH). The specimens were randomly distributed into 2 groups: XPFR or Flatsonic (n = 12). The percentage of remaining filling material after retreatment and centralization ability was evaluated. Data were submitted to Mann-Whitney, Wilcoxon, and unpaired t tests (α = 5%). RESULTS: Greater capacity to remove remaining filling material in the entire canal and the cervical and middle thirds was observed for the Flatsonic compared with the XPFR (P < .05). However, both supplementary cleaning techniques showed a similar percentage of residual filling material in the apical third (P > .05). No difference was observed in the centralization ability between the techniques (P > .05). CONCLUSIONS: The Flatsonic promotes greater removal of remaining filling material than the XPFR in the retreatment of flattened root canals. However, both supplementary cleaning approaches were similar in the apical third. The XPFR and Flatsonic were able to maintain root canal centralization.
Subject(s)
Dental Pulp Cavity , Molar , Root Canal Filling Materials , Root Canal Preparation , X-Ray Microtomography , X-Ray Microtomography/methods , Humans , Dental Pulp Cavity/diagnostic imaging , Dental Pulp Cavity/anatomy & histology , Root Canal Filling Materials/therapeutic use , Root Canal Preparation/instrumentation , Root Canal Preparation/methods , Molar/diagnostic imaging , Retreatment , Root Canal Obturation/methods , Ultrasonic Therapy/methodsABSTRACT
ABSTRACT The remaining filling material after retreatment can harbor bacteria and organic tissues that can influence the outcome of the therapy. Aim The aim of this study was to evalúate, by micro-CT, the amount of filling material remaining in the root canal after its removal using WaveOne Gold or ProDesign RT. Material and Method Forty human mandibular canines were instrumented with the ProTaper Next system up to the X2 instrument (25.06) and filled with gutta-percha cones and AHPlus. Teeth were divided into 2 groups (n=20): WaveOne Gold 25.07 (WOG) and ProDesign RT 25.08 (PRT) for filling removal, after which they were scanned in a micro-CT device to quantify the volume of remaining filling material. The data were subjected to log 10 transformation, Student 's t-test was performed to account for multiple observationsper sample, significance was set at 5%. Results Student 's t-test showed that there was no difference between the two systems regarding the volume of remaining filling material in the thirds: apical (p = 0.392), middle (p = 0.065), or cervical (p = 0.918). Conclusión Remaining filling material was present in all groups and both systems were similar in removing root filling material in mandibular canines.
RESUMO A permanencia de material obturador após o retratamento pode abrigar bactérias e tecidos orgánicos que podem influenciar o resultado da terapia. Objetivo O objetivo deste estudo foi avaliar, por micro-CT, a quantidade de material obturador remanescente no canal radicular após a desobturagdo com WaveOne Gold e ProDesign RT. Material e Método Quarenta caninos inferiores humanos foram instrumentados com o sistema ProTaper Next até o instrumento X2 (25.06) e obturados com cones de guta-percha e AHPlus. Os dentes foram divididos em dois grupos (n=20): WaveOne Gold 25.07 (WOG) e ProDesign RT 25.08 (PRT) e escaneados em micro-CT para quantificagdo do volume de material obturador remanescente. Os dados foram submetidos á transformando log10, o teste t de Student foi realizado para contabilizar múltiplas observagoes por amostra, a significáncia foi fixada em 5%. Resultados O teste t de Student mostrou que ndo houve diferenga no volume de material obturador remanescente entre os dois sistemas nos tergos: apical (p = 0,392), médio (p = 0,065) ou cervical (p = 0,918). Conclusao O material obturador remanescente estavapresente em todos os grupos e ambos os sistemas foram semelhantes na remogdo do material obturador radicular nos caninos inferiores.
ABSTRACT
This study evaluated changes in the root canal length (RCL) and the accuracy of the electronic apex locator (EAL) during the different stages of endodontic treatment and retreatment. Fifty-six mesial root canals of mandibular molars were selected. The actual root canal length (AL) of the canals was obtained by inserting a size 15 hand file up to the apical foramen, under magnification. The electronic lengths were obtained at the "APEX" mark of Root ZX II, using an alginate model. Both measurements were performed at three different stages of the initial root canal treatment-unflared, flared, and concluded-and at two stages of retreatment, after achieving patency and repreparation. Data were statistically analyzed and the significance level established was 5%. All stages produced a significant reduction in the AL (p < 0.05). The greatest variation was observed between the unflared-flared stages (0.2 mm) and between concluded-patency stages (0.09 mm), with no difference between them (p > 0.05). The accuracy of Root ZX II was negatively affected after achieving patency, presenting statistically significant difference compared to the other stages (p < 0.05). A significant reduction in the RCL was observed along the different stages of endodontic treatment and retreatment. The EAL was accurate to measure the root canals in most stages, except after achieving patency for endodontic retreatment. Determining and monitoring the RCL is an essential step towards a favorable prognosis, since it reduced along the different stages evaluated. Root ZX II was not accurate for endodontic retreatment.
Subject(s)
Dental Pulp Cavity , Root Canal Preparation , Humans , Odontometry , Electronics , RetreatmentABSTRACT
INTRODUCTION: The purpose of this study was to evaluate the ability of the Reciproc, Reciproc Blue, and WaveOne Gold systems to remove filling material during endodontic retreatment of extracted human mandibular premolars. METHODS: Thirty-nine teeth were instrumented with the Protaper Universal System to the F3 file and filled with the Tagger hybrid technique using an F3 gutta-percha cone and AH Plus cement. At the end of this period, the teeth were scanned with micro-computed tomography before and after removal of the filling material from the root canals. The teeth were divided into 3 groups (n = 13) based on the apical volume, depending on the systems used to remove the filling material. Group GR: Reciproc 40/.06; Group GRB: Reciproc Blue 40/.06; and Group GWG: WaveOne Gold 35/.06. The results were statistically analyzed using the tests of Kruskal-Wallis, Duncan, and analysis of variance at a significance level of 5%. RESULTS: The results showed that there were no significant differences between the amounts of filling material removed, either for the apical and middle regions alone or in the overall evaluation for the 3 groups (P = .97). The time evaluation statistically showed that the GR and GWG groups required less time to clean the root canals than the GRB group. CONCLUSIONS: Reciproc R40 files and WaveOne Gold Medium files required less time for endodontic treatment than Reciproc Blue R40 files. There was no difference in the ability to remove obturation material between the 3 instruments. No instrument was able to completely remove the filling material from the root canals.
Subject(s)
Root Canal Filling Materials , Humans , X-Ray Microtomography/methods , Dental Pulp Cavity/diagnostic imaging , Root Canal Obturation/methods , Root Canal Preparation , Retreatment , Gutta-PerchaABSTRACT
AIM: This study compared intracanal removal of filling as well as the frequency and volume of extruded material after retreatment with either HyFlex or Reciproc instruments in mandibular teeth from cadavers. METHODOLOGY: The root canals of 14 pairs of contralateral single-rooted teeth in mandibles of cadavers were instrumented with Reciproc R40 and filled using lateral compaction. The mandibles were scanned in a micro-computed tomographic (micro-CT) device before and after retreatment procedures. The contralateral teeth were assigned to two groups (n = 14) according to the retreatment protocol using either HyFlex or Reciproc instrument systems. In the HyFlex group, the HyFlex Remover instrument was worked 3 mm short of the working length (WL), followed by HyFlex CM 40.04 and 50.04 at the WL. In the Reciproc group, the R50 instrument was worked up at the coronal two thirds, followed by two more cycles until the WL was reached. Pre- and post-operative micro-CT images were analysed for extrusion and intracanal removal of filling material. RESULTS: After retreatment, extrusion of filling material occurred in 11 (78%) and 14 (100%) teeth from HyFlex and Reciproc groups respectively (p > .05). A similar volume of extruded material was observed after retreatment with both systems (p > .05). A significant decrease in the intracanal filling volume was verified after retreatment with both tested systems (p < .05). However, residual filling material was found in all root canals, regardless of the system. The amount of filling material removed (HyFlex = 80.8%; Reciproc = 65.9%) and the operation time was similar between systems (p > .05). CONCLUSIONS: A high frequency of filling material extrusion was observed after retreatment with the two systems in a cadaver model, with no significant difference between them. Both protocols obtained similar efficacy in filling material removal procedures, although none completely cleaned the canals.
Subject(s)
Root Canal Filling Materials , Humans , Gutta-Percha , Root Canal Obturation , Root Canal Preparation , Dental Instruments , Retreatment , X-Ray Microtomography/methods , Dental Pulp CavityABSTRACT
Abstract Both root canal sealer-based and supplementary protocols may influence removal of filling material during endodontic retreatment. Mesial root canals of extracted mandibular molars were prepared using HyFlex EDM 25/.08, and filled with a calcium silicate sealer (Bio-C Sealer), or an epoxy resin (AH Plus), using the single cone technique (n = 12). Retreatment was performed using ProDesign Logic (PDL) RT and PDL 35/.05. The specimens were randomly divided into two experimental groups (n = 12), and the sealers were distributed similarly. A supplementary protocol was performed with PDL 50/.01 or XP-endo Finisher. Root canal transportation and volume, in addition to the remaining filling material percentage were evaluated using high-resolution (5 µm voxel size) micro-CT. Statistical analysis was performed using t-tests (α = 0.05). Root canals filled with AH Plus presented high residual filling material (p < 0.05). Both protocols decreased residual volume of filling material in the apical third (p < 0.05). PDL 50/.01 increased the apical root canal volume (p < 0.05). No difference was observed between the systems regarding canal transportation (p > 0.05). In conclusion, AH Plus is more difficult to remove from the apical third than Bio-C Sealer. PDL 50/.01 and XP-endo Finisher enabled greater removal of filling materials in the apical third, in the retreatment of curved root canals, without promoting apical transport.
ABSTRACT
ABSTRACT Objective: To evaluate the long-term safety and efficacy of repeated corneal cross-linking in eyes of children and adolescents with progressive keratoconus. Methods: This retrospective study included nine eyes of nine consecutive patients with progressive keratoconus who underwent repeated corneal cross-linking 3.9 (range of 1.6 to 5.6) years after a primary one. All patients were followed for a mean period of 9.11 (range of 6 to 11) years after first treatment and 5.44 (range of 4 to 9) years, after corneal cross-linking retreatment. Results: Nine eyes of nine patients (six male) with progressive keratoconus underwent primary corneal cross-linking from 2009 to 2011. Despite the stability achieved with the epi-off corneal cross-linking, keratoconus continued to progress after some time. Mean time to documented evidence of keratoconus progression after primary corneal cross-linking was 3.9 (range of 1.6 to 5.6) years. All eyes were retreated as soon as progression was noted. At the last follow-up visit, 5.44 (range of 4 to 9) years after repeated corneal cross-linking, there was a significant decrease of 2.02 D in mean maximum topographic K-value (p = 0.045) and 1.95D in mean topographic K-value (p = 0.007). Conclusion: Repeated corneal cross-linking seems to be a safe and effective procedure to halt keratoconus progression after a primary corneal cross-linking failure.
RESUMO Objetivo: Avaliar a segurança e a eficácia a longo prazo da repetição do cross-linking corneano em olhos de crianças e adolescentes com ceratocone progressivo. Métodos: Estudo retrospectivo que incluiu nove olhos de nove pacientes consecutivos com ceratocone progressivo, que foram submetidos a retratamento com cross-linking corneano de 3,9 (variação de 1,6 a 5,6) anos após tratamento primário com cross-linking corneano. Todos os pacientes foram acompanhados por um período médio de 9,11 (variação de 6 a 11) anos após o primeiro tratamento e 5,44 (variação de 4 a 9) anos após retratamento com cross-linking corneano. Resultados: Nove olhos de nove pacientes (seis homens) com progressão do ceratocone foram submetidos a cross-linking corneano primário de 2009 a 2011. Apesar da estabilidade alcançada com o epi-off cross-linking corneano, o ceratocone continuou a progredir após algum tempo. O tempo médio para evidência documentada de progressão do ceratocone após cross-linking corneano primário foi de 3,9 (intervalo de 1,6 a 5,6) anos. Todos os olhos foram retratados com cross-linking corneano, assim que a progressão foi observada. Na última consulta de acompanhamento, 5,44 (variação de 4 a 9) anos após a repetição do cross-linking corneano, houve diminuição significativa de 2,02 D na média da curvatura máxima (p = 0,045) e 1,95 D na média da curvatura média (p = 0,007). Conclusão: O retratamento com cross-linking corneano parece ser um procedimento seguro e eficaz para interromper a progressão do ceratocone após falha primária do cross-linking corneano.
Subject(s)
Humans , Male , Female , Child , Adolescent , Corneal Cross-Linking/methods , Keratoconus/drug therapy , Riboflavin/therapeutic use , Ultraviolet Rays , Retrospective Studies , Follow-Up Studies , Photosensitizing Agents/therapeutic use , Retreatment , Cross-Linking Reagents/therapeutic use , Corneal Pachymetry , Keratoconus/diagnosisABSTRACT
O retratamento endodôntico é uma intervenção executada em um dente que já apresenta um tratamento realizado anteriormente que foi mal sucedido clínica e/ou radiograficamente. O objetivo deste trabalho foi o de relatar um caso de retratamento endodôntico na clínica de Atenção Básica III da Faculdade de Odontologia de Pernambuco devido ao desconforto estético do incisivo lateral superior que estava fraturado e necessitando de prótese fixa. Após anamnese, exames extra e intra-oral e exames radiográficos, constatou-se o canal do dente 12 havia sido tratado endodonticamente há aproximadamente quatro anos. A remoção da gutta percha contaminada foi realizada com as limas rotatórias EasyLogic RT® 25mm sequência 30.10 torque 4N e 900 RPM, 25.08 torque 4Ne 900 RPM. Após remoção da guta-percha, realizou-se o protocolo de irrigação com solução de hipoclorito de sódio a 2,5% (Biodinâmic). A odontometria foi realizada com localizador apical e confirmada por radiografia periapical e o repreparo do canal radicular confeccionado com a Lima EasyLogic 2® de número 35.06 e posterior irrigação com a solução de Labarraque. Nesse momento, o paciente relatou dor e após aspiração com sugador endodôntico, notou-se sangramento abundante, correspondendo ao extravasamento do hipoclorito de sódio (Enfizema por hipoclorito de sódio. O paciente foi medicado com Amoxacilina 875mg de 12 em 12 horas durante sete dias, Predisin 20mg Corticóide - um comprimido pela manhã por 4 dias e Nimesulida 100mg de 12 em 12 horas durante 5 dias. Após 24 horas o paciente não relatou dor nem edema. Na segunda sessão, 10 dias após o acidente, a obturação foi realizada com cone único de guta-percha 35.06 HBassi (Easy, associado ao cimento Bio C Sealer Fillapex (Angelus®). Concluiu-se que a conduta terapêutica imediata instituída para este caso, foi efetiva para o controle da dor e prevenção de complicações adicionais após injeção acidental de hipoclorito de sódio.
Endodontic retreatment is an intervention performed on a tooth that already has a previously performed treatment that was clinically and/ or radiographically unsuccessful. The objective of this study was to report a case of endodontic retreatment at the Primary Care Clinic III of the Faculty of Dentistry of Pernambuco due to the aesthetic discomfort of the maxillary lateral incisor that was fractured and required a fixed prosthesis. After anamnesis, extra and intraoral exams and radiographic exams, it was found that the root canal of tooth 12 had been endodontically treated for approximately four years. Removal of contaminated gutta percha with those performed with EasyLogic RT® 25mm rotary files sequence 30.10 torque 4N and 900 RPM, 25.08 torque 4N and 900 RPM. After removing the gutta-percha, the irrigation protocol was performed with a 2.5% sodium hypochlorite solution (Biodynamic). Odontometry was performed with an apex locator and confirmed by periapical radiography and root canal re-preparation made with EasyLogic 2® File number 35.06 and subsequent irrigation with Labarraque's solution. At that moment, the patient reported pain and after aspiration with an endodontic sucker, there was profuse bleeding, corresponding to sodium hypochlorite extravasation (Sodium hypochlorite emphysema. The patient was medicated with Amoxicillin 875mg every 12 hours for seven days, Predisin 20mg - Corticosteroid - one tablet in the morning for 4 days and Nimesulide 100mg every 12 hours for 5 days. After 24 hours the patient did not report pain or swelling. In the second session, 10 days after the accident, the filling was performed with a single cone of gutta-percha 35.06 HBassi (Easy, associated with Bio C Sealer Fillapex cement (Angelus®). It was concluded that the immediate therapeutic approach instituted for this case was effective for pain control and prevention of complications. additional doses after accidental injection of sodium hypochlorite.
El retratamiento endodóntico es una intervención que se realiza sobre un diente que ya tiene un tratamiento realizado previamente que resultó clínica y/o radiográficamente fallido. El objetivo de este estudio fue relatar un caso de retratamiento endodóntico en la Clínica de Atención Básica III de la Facultad de Odontología de Pernambuco debido a la incomodidad estética del incisivo lateral maxilar que estaba fracturado y requirió prótesis fija. Después de anamnesis, exámenes extraorales, intraorales y exámenes radiográficos, se encontró que el conducto radicular del diente 12 había sido tratado endodónticamente durante aproximadamente cuatro años. Eliminación de gutapercha contaminada con las realizadas con limas rotatorias EasyLogic RT® 25mm secuencia 30.10 torque 4N y 900 RPM, 25.08 torque 4N y 900 RPM. Tras retirar la gutapercha, se realizó el protocolo de irrigación con una solución de hipoclorito de sodio al 2,5% (Biodynamic). Se realizó odontometría con localizador de ápices y se confirmó mediante radiografía periapical y repreparación del conducto radicular realizada con EasyLogic 2® File número 35.06 y posterior irrigación con solución de Labarraque. En ese momento el paciente refirió dolor y luego de aspiración con ventosa endodóntica presentó sangrado profuso, correspondiente a extravasación de hipoclorito de sodio (Enfisema por hipoclorito de sodio. El paciente fue medicado con Amoxicilina 875mg cada 12 horas por siete días. Predisin 20mg - Corticosteroide - una tableta por la mañana por 4 días y Nimesulida 100mg cada 12 horas por 5 días, luego de 24 horas el paciente no refirió dolor ni hinchazón, en la segunda sesión, 10 días después del accidente, se realizó el relleno con un solo cono de gutapercha 35.06 HBassi (Easy, asociado al cemento Bio C Sealer Fillapex (Angelus®). Se concluyó que el abordaje terapéutico inmediato instituido para este caso fue eficaz para el control del dolor y la prevención de complicaciones. dosis adicionales después de accidente inyección de hipoclorito de sodio.
Subject(s)
Humans , Male , Middle Aged , Retreatment , Endodontics , Amoxicillin/administration & dosageABSTRACT
Objectives: This study evaluated the efficiency of WaveOne Primary files (Dentsply Sirona) for removing root canal fillings with 2 types of movement: reciprocating (RCP) and continuous counterclockwise rotation (CCR). Materials and Methods: Twenty mandibular incisors were prepared with a RCP instrument (25.08) and filled using the Tagger hybrid obturation technique. The teeth were retreated with a WaveOne Primary file and randomly allocated to 2 experimental retreatment groups (n = 10) according to movement type: RCP and CCR. The root canals were emptied of filling material in the first 3 steps of insertion, until reaching the working length. The timing of retreatment and procedure errors were recorded for all samples. The specimens were scanned before and after the retreatment procedure with micro-computed tomography to calculate the percentage and volume (mm3) of the residual filling material. The results were statistically evaluated using paired and independent t-tests, with a significance level set at 5%. Results: No significant difference was found in the timing of filling removal between the groups, with a mean of 322 seconds (RCP) and 327 seconds (CCR) (p < 0.05). There were 6 instrument fractures: 1 in a RCP motion file and 5 in continuous rotation files. The volumes of residual filling material were similar (9.94% for RCP and 15.94% for CCR; p > 0.05). Conclusions: The WaveOne Primary files used in retreatment performed similarly in both RCP and CCR movements. Neither movement type completely removed the obturation material, but the RCP movement provided greater safety.